Locating Pins - Sphere Small Head (Press Fit)

MISUMI

The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change
Please check the content on our website as the PDF does not contain the most up-to-date information.

- Locating Pins - Sphere Small Head (Press Fit) from MISUMI.
- The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Insertion guide tip shape can be selected 2 types, round, and diamond.

(Round) (Diamond)

Buffed at

part only.
(Except Diamond Cut Surface)

When P<3
a＝0.5
d＝D (P)－0.1

When P≥3
a ≤1.0
d＝D(P)－0.2

[ ! ]Relief dimension is a reference value.

* The insertion guide is applicable to both the Tolerance m6 and p6 Types.

[ ! ]Locating Pins for Height Adjusting with shorter B fixed dimension is also available.
[ ! ]SUS440C or 13Cr stainless has an identification groove on insertion guide.
[ ! ]Polishing and centering hole may not be provided.
[ ! ]When the P dimension is small, a centering hole will cause the sphere section to become small.
[ ! ]When D=P, relief is also applied.
[ ! ]The spherical head may be polished.

Material No.	[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	P Selectable		P, L, B Configurable
Material No.	[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	Type	D Tolerance and Shape	Type	D Tolerance and Shape
(1)	SKS3 Equivalent	-	Treated Hardness: 60~63HRC	JPQ	<Round> SB (m6) SPB (p6)	FPQ	<Round> SA (m6) SPA (p6) <Diamond> SD (m6) SPD (p6)
(2)	SKS3 Equivalent	Hard Chrome Plating	Treated Hardness: 50~55HRC / Plating Hardness: 750HV ~	-		GFPQ
(3)	SUS304*	-	-	SJPQ		SFPQ
(4)	SUS304	Hard Chrome Plating	Plating Hardness: 750HV ~	-		HFPQ
(5)	SUS440C or 13Cr stainless	-	Treated Hardness: 50~55HRC	-		CFPQ
(6)	SKS3 Equivalent	Buffing	Treated Hardness: 60~63HRC	-		MFPQ

* For P Selectable Type, it is SUS304 equivalent.

Example

Pins with sphere head prevent damages on mating parts.
Locating Pins - Sphere Small Head (Press Fit):Related Image