Locating Pins - Large Head, Tapered (Press Fit)
:
MISUMI
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
- Locating Pins - Large Head, Tapered (Press Fit) from MISUMI.
- Tapered Head Standard Type. Press Fit. Economical and there is a variety of selections to choose from. Same day shipping available.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The insertion guide is applicable to tolerance p6 only.
Dimensional Drawing
(Round)
(Diamond)
* The insertion guide is applicable to tolerance p6 only.
[ ! ] For SUS440C or 13Cr stainless steel, an identification groove is provided on D part, unless the L dimension is short.
[ ! ] SUS304 products may not be polished and have no centering hole.
When D < 3
a = 0.5
d = D - 0.1
[ ! ] Relief dimensions are reference values.
When D ≥ 3
a = 1.0
d = D - 0.2
Product Specifications
Part Number Display Method
| Part Number | — | P | — | L | — | B | ||||
| Type | D Tol. Config. | D | ||||||||
| JP | BB | 6 | — | 10 | — | — | ||||
| JP | BD | 8 | — | 11.98 | ||||||
| FP | BA | 10 | — | P12.02 | — | L10 | — | B3.2 | ||
| FP | BD | 12 | — | P13.97 | — | L12 | — | B5 | ||
Specification Table
■P Fixed Type
| Part Number | P Selection | L | B | C | m | ℓ | (W) | |||||||||||||||||
| Type | D Tolerance, Shape | D | D Dimension Tolerance | |||||||||||||||||||||
| m6 | p6 | |||||||||||||||||||||||
| JP GJP BJP SJP HJP CJP | [Round] BB(m6) BPB(p6) [Diamond] DB(m6) DPB (p6) [ ! ] Applicable when D ≥ 2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 3 | 0.1 | 0.5 | 0 | — | |||||||||||||
| 2 | 3 | 4 | 4 | 0.5 | 1 | 1.2 | ||||||||||||||||||
| 3 | 4 | 5 | 6 | 5 | 5 | 2 | 1 | 1.5 | ||||||||||||||||
| 4 | +0.012 +0.004 | +0.020 +0.012 | 5 | 6 | 6 | 1 | 3 | 1.8 | ||||||||||||||||
| 5 | 6 | 8 | 10 | 2.2 | ||||||||||||||||||||
| 6 | 8 | 10 | 8 | 3 | ||||||||||||||||||||
| 8 | +0.015 +0.006 | +0.024 +0.015 | 10 | 12 | 13 | 15 | 1.5 | 4 | 3.5 | |||||||||||||||
| 10 | 12 | 13 | 15 | 10 | 2 | 4 | ||||||||||||||||||
| 12 | +0.018 +0.007 | +0.029 +0.018 | 13 | 15 | 16 | 5 | ||||||||||||||||||
| 13 | 15 | 16 | 22 | 2 | 5.5 | |||||||||||||||||||
| 16 | 20 | 25 | 3 | 5 | 7 | |||||||||||||||||||
| 20 | +0.021 +0.008 | +0.035 +0.022 | 25 | 30 | 30 | 15 | 9 | |||||||||||||||||
■P Configurable
| Part Number | P 0.01 mm Increments | L | B | C | m | ℓ | (W) | ||||
| Type | D Tolerance, Shape | D | D Dimension Tolerance | ||||||||
| m6 | p6 | ||||||||||
| JP GJP BJP SJP HJP CJP | [Round] BA (m6) BPA (p6) [Diamond] BD (m6) BPD (p6) [ ! ] Applicable when D ≥ 2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.20 to 2.50 | 3 | 3 | 0.1 | 0.5 | 0 | — |
| 2 | 2.50 to 4.00 | 4 | 0.5 | 1 | 1.2 | ||||||
| 3 | 3.50 to 6.00 | 5 | 5 | 2 | 1 | 1.5 | |||||
| 4 | +0.012 +0.004 | +0.02 +0.012 | 4.50 to 7.00 | 6 | 1 | 3 | 1.8 | ||||
| 5 | 5.50 to 8.00 | 10 | 2.2 | ||||||||
| 6 | 6.50 to 10.00 | 8 | 3 | ||||||||
| 8 | +0.015 +0.006 | +0.024 +0.015 | 9.00 to 13.00 | 15 | 1.5 | 4 | 3.5 | ||||
| 10 | 11.00 to 15.00 | 10 | 2 | 4 | |||||||
| 12 | +0.018 +0.007 | +0.029 +0.018 | 13.00 to 16.00 | 5 | |||||||
| 13 | 14.00 to 18.00 | 22 | 2 | 5.5 | |||||||
| 16 | 17.00 to 25.00 | 3 | 5 | 7 | |||||||
| 20 | +0.021 +0.008 | +0.035 +0.022 | 22.00 to 30.00 | 30 | 15 | 9 | |||||
■P, L, B Configurable
[ ! ] P, L, B dimensions in ( ) are applicable to Diamond Shape
| Part Number | P 0.01 mm Increments | L 1 mm Increments | B 0.1 mm Increments | C | m | ℓ | (W) | |||||
| Type | D Tolerance, Shape | D | D Dimension Tolerance | |||||||||
| m6 | p6 | g6 | ||||||||||
| FP GFP BFP SFP HFP CFP | [Round] BA(m6) BPA(p6) BG (g6) [Diamond] BD(m6) BPD(p6) DG (g6) | 1 | +0.008 +0.002 | +0.012 +0.006 | －0.002 －0.008 | 1.20 (1.50)Up to 3.00 (2.50) | 2·3 | 1.0 to 5.0 | 0.1 | 0.5 | 0 | 0.6 |
| 2 | 2.50 to 6.00 (4.00) | 2 to 6 | 1.0 to 15.0 (10.0) | 0.5 | 1 | 1.2 | ||||||
| 3 | 3.50 to 8.00 | 3 to 10 | 1.0 to 15.0 (10.0) | 2 | 1 | 1.5 | ||||||
| 4 | +0.012 +0.004 | +0.020 +0.012 | －0.004 －0.012 | 4.50 to 8.00 | 3 (4)Up to 14 | 1.0 to 15.0 (10.0) | 1 | 3 | 1.8 | |||
| 5 | 5.50 to 10.00 | 5 to 15 | 1.0 to 15.0 (10.0) | 2.2 | ||||||||
| 6 | 6.50 to 10.00 | 5 to 15 | 1.0 to 30.0 (25.0) | 3 | ||||||||
| 8 | +0.015 +0.006 | +0.024 +0.015 | －0.005 －0.014 | 8.50 to 15.00 | 5 (6)Up to 16 | 1.0 to 30.0 (25.0) | 1.5 | 4 | 3.5 | |||
| 10 | 11.00 to 17.00 | 5 (10)Up to 20 | 3.0 to 30.0 (25.0) | 2 | 4 | |||||||
| 12 | +0.018 +0.007 | +0.029 +0.018 | －0.006 －0.017 | 13.00 to 18.00 | 6 (10)Up to 24 | 3.0 to 30.0 (25.0) | 5 | |||||
| 13 | 14.00 to 20.00 | 7 (12)Up to 26 | 5.0 to 30.0 (25.0) | 2 | 5.5 | |||||||
| 16 | 17.00 to 27.00 | 8 (15)Up to 32 | 5.0 to 30.0 | 3 | 5 | 7 | ||||||
| 20 | +0.021 +0.008 | +0.035 +0.022 | －0.007 －0.020 | 22.00 to 30.00 | 10 (15)Up to 40 | 5.0 to 30.0 | 9 | |||||
Mass (g) Ref. Value | |||||
Config. | D | P | SKS3 Equivalent | SUS304 Equivalent | SUS440C or 13Cr Stainless Steel |
Round | 1 | 2 | 0.09 | 0.09 | 0.09 |
2 | 3 | 0.27 | 0.27 | 0.27 | |
4 | 0.39 | 0.40 | 0.40 | ||
3 | 4 | 0.77 | 0.79 | 0.78 | |
5 | 1.05 | 1.07 | 1.06 | ||
6 | 1.39 | 1.41 | 1.40 | ||
4 | 5 | 1.42 | 1.44 | 1.43 | |
6 | 1.83 | 1.86 | 1.84 | ||
5 | 6 | 2.88 | 2.93 | 2.90 | |
8 | 3.91 | 3.98 | 3.95 | ||
6 | 8 | 5.38 | 5.48 | 5.43 | |
10 | 7.16 | 7.28 | 7.22 | ||
8 | 10 | 10.86 | 11.05 | 10.96 | |
12 | 13.03 | 13.26 | 13.15 | ||
13 | 14.27 | 14.52 | 14.39 | ||
10 | 12 | 18.14 | 18.46 | 18.30 | |
13 | 19.68 | 20.03 | 19.86 | ||
15 | 23.14 | 23.55 | 23.34 | ||
12 | 13 | 23.75 | 24.18 | 23.97 | |
15 | 27.21 | 27.69 | 27.45 | ||
16 | 29.12 | 29.64 | 29.38 | ||
13 | 15 | 36.82 | 37.48 | 37.15 | |
16 | 38.74 | 39.43 | 39.08 | ||
16 | 20 | 59.43 | 60.49 | 59.96 | |
25 | 73.31 | 74.62 | 73.97 | ||
20 | 25 | 131.89 | 134.24 | 133.06 | |
30 | 157.34 | 160.14 | 158.74 | ||
Diamond | 2 | 3 | 0.18 | 0.18 | 0.18 |
4 | 0.28 | 0.29 | 0.28 | ||
3 | 4 | 0.54 | 0.55 | 0.54 | |
5 | 0.75 | 0.77 | 0.76 | ||
6 | 1.03 | 1.05 | 1.04 | ||
4 | 5 | 0.99 | 1.01 | 1.00 | |
6 | 1.32 | 1.34 | 1.33 | ||
5 | 6 | 2.25 | 2.29 | 2.27 | |
8 | 3.08 | 3.14 | 3.11 | ||
6 | 8 | 3.87 | 3.94 | 3.91 | |
10 | 5.27 | 5.36 | 5.32 | ||
8 | 10 | 8.66 | 8.81 | 8.74 | |
12 | 10.39 | 10.58 | 10.48 | ||
13 | 11.40 | 11.61 | 11.51 | ||
10 | 12 | 14.37 | 14.62 | 14.50 | |
13 | 15.60 | 15.87 | 15.73 | ||
15 | 18.42 | 18.75 | 18.59 | ||
12 | 13 | 18.65 | 18.98 | 18.81 | |
15 | 21.32 | 21.69 | 21.50 | ||
16 | 22.83 | 23.24 | 23.04 | ||
13 | 15 | 30.34 | 30.88 | 30.61 | |
16 | 31.82 | 32.39 | 32.10 | ||
16 | 20 | 48.43 | 49.29 | 48.86 | |
25 | 59.56 | 60.62 | 60.09 | ||
20 | 25 | 105.36 | 107.24 | 106.30 | |
30 | 125.50 | 127.74 | 126.62 | ||