One-Side Rib Bracket - 5 Series, 6mm Slot, 1 Slot

MISUMI

The rib (side) is only on one side, making it easy to turn a hex key.

Dimensional Drawing of 90 degree Brackets

HBLFSL5
HBLFSL5
HBLFSL5

5 Series (groove width 6 mm) - For single row groove - Single rib bracket: Related images

[ ! ]For the squareness of the 90 degree Brackets, please check the squareness tolerance table .

Type	[M] Material	[S] Surface Treatment
HBLFSL5	ADC12	−
HBLFSLB5		Cathodic electrocoating (black)
HBLFSLM5		Electroless Nickel Plating

Specification Table of 90 degree Brackets

Model 90 degree Brackets

HBLFSL5

・The price list below is currentas of April 2011.・To check the latest price, please click the "Check Price" button after confirming the model number.

Model 90 degree Brackets	Mass (g)	Suitable bolts and T-nuts				Allowable load (N)
Type		bolt	Quantity	T-Nut	Quantity
HBLFSL5	13	CBM5-10	2	HNTT5-5	2	1176
HBLFSLB5 (cationic electrocoating: black)
HBLFSLM5 (Electroless Nickel Plating)

Additional Processing of 90 degree Brackets

Model 90 degree Brackets	−	(C・SET・SST・SEU・SSU・SEP・SSP・SEC)
HBLFSL5	−	SET
HBLFSL5	−	C-SET

Alterations	Code	Spec.	Applicable bracket
Additional cover mounting holes	C	The 90 degree Brackets is tapped for mounting the cover (M5 on both sides) (Mounting screws are HCBM) .	HBLFSNF5
			HBLFSN5
			HBLFSN5-4
			HBLFSNB5
			HBLFSNM5
			CHBLFSN5
			HBLFSL5
			HBLFSLB5
			HBLFSLM5
			HBLFSR5
			HBLFSNK5
			HBLFSNE5
			HBLFSNT5
			HBLFSSW5
			HBLFSSWB5

<Cover installation example>
Please specify alteration code -C.
Related images

Alterations

Code

Spec.

Applicable bracket

Applicable bolts
and nuts included

SET
SST
(stainless steel)
SEU
(pre-assembly
spring nut)
SSU
(pre-assembly
spring nut
stainless steel)
SEP
(post-assembly
spring nut)
SSP
(post-assembly
spring nut
stainless steel)
SEC
(
bolt and
nut with washer)

The applicable bolts and nuts for attaching the bracket to the frame are included in the set. (Added to the bracket price)

(Example) When HBLFSL5 is specified

	bolt		nut
Code	Model	Quantity	Model	Quantity
SET	CBM5-10	2	HNTT5-5	2
SST	SCB5-10		HNTTBS5-5
SEU	CBM5-10		HNTU5-5
SSU	SCB5-10		SHNTU5-5
SEP	CBM5-10		HNTP5-5
SSP	SCB5-10		SHNTP5-5

HBLFSNF5

HBLFSN5

HBLFSN5-4

HBLFSNB5

HBLFSNM5

CHBLFSN5

HBLFSL5

HBLFSLB5

HBLFSLM5

HBLFSR5

HBLFSNK5

HBLFSNE5

HBLFSNT5

HBLFSSW5

HBLFSSWB5

[ ! ]The bolts for the black anodized and cathodic electroplated (black) brackets are these HCBMTB (black trivalent chromate).
[ ! ] When specifying -SET, -SEU, or -SEP for brackets other than black anodized and cathodic electroplated (black), the included bolts are not RoHS compliant.

Additional Processing Details of 90 degree Brackets

■ Hole processing for cover installation (-C) of 90 degree Brackets

You can add M5 tapped holes on both sides.
Example of additional machining model: HBLFSL5-C

■ Details 90 degree Brackets of applicable bolt and nut sets

Additional processing model	bolt		nut
Additional processing model	Model	Material	type	Model	Material	Stopper
SET	CBM5-10	iron	First in	HNTT5-5	iron	none
SST	SCB5-10	stainless	First in	HNTTBS5-5	stainless	none
SEU	CBM5-10	iron	First in	HNTU5-5	iron	Yes
SSU	SCB5-10	stainless	First in	SHNTU5-5	stainless	Yes
SEP	CBM5-10	iron	Later insertion	HNTP5-5	iron	Yes
SSP	SCB5-10	stainless	Later insertion	SHNTP5-5	stainless	Yes

How to Use of 90 degree Brackets

90 degree Brackets, This type has a protrusion that fits into the frame groove.
The protrusion acts as a rotation stopper during fastening work, making it easy to work with.
This type has a rib (side) on only one side, making it easy to turn the hex wrench.

The cover plate can be fitted with both 5mm and 3mm thicknesses to match the frame surface.
Related images

Technical Information of 90 degree Brackets

■
For the squareness of the bracket, please refer to the squareness tolerance table .
■ How to consider the 90 degree Brackets allowable load

90 degree Brackets, As shown in the left figure, two frames are set up, a frame is placed between them, and two brackets are attached underneath, and the allowable load per unit is shown.
90 degree Brackets, The allowable load here indicates the load at which the bracket can maintain its position (without breaking or slipping) when all mounting holes on the bracket are fixed with bolts and a load is applied.

Similar Products of 90 degree Brackets

■ 90 degree Brackets with protrusions: The mounting surface has protrusions to prevent rotation.

Product name	Single Rib Bracket	Inverted bracket with protrusion	Bracket with cover	Nut stop bracket	Bracket with protrusion on one side
Product Photos					No protrusions on one side, can be connected to plate
Material	ADC12	ADC12	ADC12	ADC12	ADC12
Features 90 degree Brackets	This type has a rib (side) on only one side, making it easy to turn the hex wrench.	The mounting surface has a protrusion, making it easy to position when mounting. This is the most conventional type.	This type is equipped with a dustproof cover. Dust does not accumulate inside, making it hygienic.	The long protrusion serves as the nut lock, eliminating the need for fine adjustment of the nut position.	The protrusion is on one side only and is useful when connecting frames/plates.
Representative Model	This product	HBLFSN5	HBLFSNT5	HBLFSR5	HBLFSNK5

Related Items of 90 degree Brackets

■ 5 Series (groove width 6mm) of 90 degree Brackets

Product name	Aluminum frame	Blind Joint	Frame cap	Groove cover	nut
photograph
Product page	Here	Here	Here	Here	Here

Example

Brackets - 5 Series, One-Side Rib Brackets:Related Image