Low Pressure Fittings/Nipple
:
MISUMI
- [Specification Change] The appearances of some part numbers will be changed sequentially starting in September 2025. Please see here for details. Products before and after the change may be mixed in the same shipment, but there are no problems with use.
- Please check the content on our website as the PDF does not contain the most up-to-date information.
[Connection Type]Thread to thread, same diameter / same type; Connection shape: Round nipple; Material / surface treatment: SGP with hot-dip galvanizing, or SUS304 with no treatment.
| Type | [ M ]Material | [ S ]Surface Treatment |
| SGPNP | SGP | Hot Zinc Plating |
| SUTNP | SUS304 | - |
More Information
Operating Conditions of Fittings
*Pulsating Water is a stream of water that is generated under steady operating conditions and variation of pressure and flow rate occurs in cycles. (Except for transitional change)
* Static Flow Water is a non-pulsating stream of water.
* As fittings are cast products, ( ) dimensions such as (D) and (L2) are for reference, not guaranteed.
| Fluid State | Max. Operating Pressure (MPa) |
| Steam, Air, Gas, Oil: Up to 300°C | 1.0 |
| Steam, Air, Oil, Pulsating Water: Up to 200°C | 1.4 |
| Static Flow Water: Up to 120°C | 2.0 |
* Static Flow Water is a non-pulsating stream of water.
* As fittings are cast products, ( ) dimensions such as (D) and (L2) are for reference, not guaranteed.