Low Pressure Fittings/90 Deg. Elbow/Threaded and Tapped

MISUMI

[Specification Change] The materials and appearances of some part numbers will be changed sequentially starting in September 2025. Please see here for details. Products before and after the change may be mixed in the same shipment, but there are no problems with use.
Please check the content on our website as the PDF does not contain the most up-to-date information.

[Connection Type] Thread <=> Thread Equal Diameter / Different Type, [Connection Shape] Female / Male Elbow, [Material] Selectable from stainless steel or steel.

Low Pressure Pipe Fittings - 90 Deg. Elbow, Threaded and Tapped:Related Image

■Without thread coating
・Materials

Type	[ M ]Material	[ S ] Surface Treatment
SGPPEL	FCMB270	Hot Zinc Plating
SUTPEL	SUS304 Equivalent	-

■With thread coating
・Materials

Type	[ M ]Material	[ S ]Surface Treatment
SGCEL	FCMB270	Hot Zinc Plating
SUCEL	SUS304 Equivalent	-

Allowable temperature: 150℃

More Information

Operating Conditions of Joints

Fluid State	Max. Operating Pressure MPa (kgf/cm²)
Steam, Air, Gas, Oil: Up to 300°C	1.0 (10.2)
Steam, Air, Oil, Pulsating Water: Up to 200°C	1.4 (14.3)
Static Flow Water: Up to 120°C	2.0 (20.4)

*Pulsating water is a stream of water that is generated under steady operating conditions and variation of pressure and flow rate occurs in cycles.
(Except for transitional change)
*Static Flow Water is a non-pulsating stream of water.