Air Blow Nozzle. Male/Female Thread, Knurling, Terminal Block, Non-Annealed

MISUMI

Please check the content on our website as the PDF does not contain the most up-to-date information.
The price list on this page is as of April 2023. For the latest price, please click the "Confirm Price" button after confirming the part number.

◆Features: You can choose from male thread (annealed or non-annealed), female thread (annealed or non-annealed), knurled iris (annealed), or terminal block (annealed).

*Annealed pipes with an outer diameter of 1.0 to 3.0 can be bent by hand. (Outer diameter 4.0 or more is not allowed)
The minimum bending radius is outer diameter x 3, and please bend carefully to avoid applying stress to the brazed part.

◆Air source: Compressor◆Injection shape: Point◆Material: SUS304
From August 2021, we will be adding nominal size standards.

● Threaded Type (When Nominal = 3, 5 or 6)

(When Nominal = 0.5, 1 or 2)

● Terminal Block Type

● Tapped Type (When Nominal = 3, 5 or 6)

(When Nominal = 1 or 2)

● Crisscross Knurled Type (When Nominal = 5)

(When Nominal = 1)

* Nominal 1: ø8, Nominal 2: ⌀10

	Male Threaded		Tapped		Terminal Block	Knurling Crisscross	[M] Material	[H] Hardness
	Annealing	No Annealing	Annealing	No Annealing	Annealing		[M] Material	[H] Hardness
L Fixed	ABNZ	ABNZN	ABNZM	ABNZMN	ABTA	ABNK	Main Body, Pipe SUS304	Annealing HV200 or Less No Annealing HV250 to 380
L Configurable	ABNZL	ABNZNL	ABNZML	ABNZMNL	ABTAL	ABNX	Main Body, Pipe SUS304	Annealing HV200 or Less No Annealing HV250 to 380

[ ! ] Since the soldered part is prone to detach, when bending the nozzle, secure the nozzle tip and push the mounting side to bend it.

Specifications / Overview

[ ! ] The annealed pipe of d = 1.0 to 3.0 can be manually bent (not applicable when d = 4.0 or more).
Be careful to bend referring to rough standard of minimum bending radius; O.D. x 3.
Annealed pipe is available for Straight Type.
[ ! ] An industrial cutter can cut the pipe, rolling it.
[ ! ] Main body may be discolored due to heat by brazing.