Shaft Collar - One-Touch Type
:
MISUMI
- [Specification Change] The materials, surface treatment, and appearances will be changed sequentially starting in July 2026. Please see here for details. Products before and after the change, including packaging, may be mixed in the same shipment, but there are no problems with use.
- Please check the content on our website as the PDF does not contain the most up-to-date information.
[Features]·Easy and quick to install and remove. ·Standard thickness.
Dimensional Drawing
■Standard
■Mount Hole Type
Lever Operating Direction
| Type | [M] Material | [S] Surface Treatment | [A]Accessory |
| Hex Socket Head Cap Screw 1 pc. | |||
| WSC | 2000 Series Aluminum Alloy | Clear Anodize | SUS304 Equivalent |
| WSCM | |||
| WSCB | Black Anodize |
Spring: Material SWP-A
[ ! ] Tapped holes are not anodized.
Specifications/Overview
■ Features:
·The lever pressed by the spring gives consistent pressure on the shaft.
·Shaft collar can be easily removed by moving the lever down with a finger.
·Shafts do not require any flat alterations to secure the collar as in the case with Set Screws and can be clamped without damage.
·Working time can be reduced for frequent collar mounting and/or removal.
·Suitable for use in holding spools of material such as paper, film, metal foil, etc., and for uses in applications where there is no load on the collars.
·The lever pressed by the spring gives consistent pressure on the shaft.
·Shaft collar can be easily removed by moving the lever down with a finger.
·Shafts do not require any flat alterations to secure the collar as in the case with Set Screws and can be clamped without damage.
·Working time can be reduced for frequent collar mounting and/or removal.
·Suitable for use in holding spools of material such as paper, film, metal foil, etc., and for uses in applications where there is no load on the collars.