SIMPLE FLOW METER －STRAIGHT－
:
MISUMI
- Please check the content on our website as the PDF does not contain the most up-to-date information.
[Applications]
·It can be used for simple flow rate confirmation.
·You can monitor the mold cooling water at a glance, so you can prevent molding defects at low cost.
[Features]
·M-FLM-S-33R-TM is equipped with a simple thermometer.
·The resin part has a hexagonal shape that makes it easy to hang tools.
·Since the float is supported by a spring, it can be used even sideways.
·The structure prevents the fitting from rotating.
[Materials]
·Polyamide, brass
M-FLM-S-33M-FLM-S-22 M-FLM-S-3R3 M-FLM-S-33R-TM
[ M ]Material: Polyamide/Brass
Usable temperature(Oil)(°C) 120 or less
Usable temperature(Water)(°C) 80 or less
Allowable pressure(MPa) 0.98
Max. flow rate(ℓ/min) 10
Usable temperature(Oil)(°C) 120 or less
Usable temperature(Water)(°C) 80 or less
Allowable pressure(MPa) 0.98
Max. flow rate(ℓ/min) 10
■Features
- M-FLM-S-33R-TM is equipped with a simple thermometer.
- The resin part is hexagonal; to hook onto the tool.
| Part Number |
| M-FLM-S-22 |
| L | D | IN side screw | OUT side screw | Part Number | |
| Type | No. | ||||
| 81 | 25.5 | RC(PT)1/4 | RC(PT)1/4 | M-FLM-S | 22 |
RC(PT)3/8 | RC(PT)3/8 | 33 | |||
| 85 | R(PT)3/8 | RC(PT)3/8 | 3R3 | ||
| 110 | - | RC(PT)3/8 | R(PT)3/8 | 33R-TM | |