Air Tube/Nylon Tube（O.D. [Distinction]：~15 Page2）

TOMBO No. 9003 NAFLON PTFE Tube

NICHIAS

Fluororesin (PTFE) tube. Excellent chemical resistance, heat resistance, and weatherproof performance.[Features]· Chemical permeation is minimal (reduced to approximately 60% of PFA-HG (measured with hydrochloric acid, nitrogen, and oxygen)).· The amount of permeation for a PFA-HG tube is reduced to approximately 50% that of a standard PFA tube (HCl comparison).· Elution of fluorine ions is minimal (equivalent to a PFA-HG tube).· The inner surface of the tube is smooth (Equivalent to a PFA-HG tube).

Junron AS1 (Inch Series Flexible Nylon Tube)

JUNKOSHA

[Features]・ Excellent mechanical strength, especially pressure resistance, abrasion resistance and flex fatigue resistance・ It has excellent heat and cold resistance・ It is highly flexible・ Excellent oil and chemical resistance (especially alkali resistance)・ No risk of elution of toxic substances・ Light and has excellent workability[Applications]・ Tube for oil / pneumatic equipment・ Tube for centralized lubrication equipment・ Tube for painting equipment・ Tube for chemical plant

Coiling Nylon Tube for General Piping

PISCO

This is a tube that is ideal for air guns, pneumatic screwdrivers, etc.

Multi-Core Straight Flat Tube for General Piping

PISCO

Flat tubes ideal for filling machine-related specifications.[Features]·Multiple pipes such as double-acting drive equipment can be neat and clean.·UQ using flexible polyurethane tube and UCQ using ultra-soft polyurethane tube are available.·In the case of black with 2 cores, an identification line is printed on one side of the tube to prevent piping mistakes.·Cut marks are displayed at intervals of approx. 500 mm, which is useful when cutting the tube.

ALE Type L-Flex Spatter-Resistant Tube

CHIYODA

[Features]· Inner TE tube. The features of TP tubes are all inherited. At welding sites, the tube can be used for both air and cooling water (industrial water) without separation・ Wide color variations. Convenient for pipe management・ 3-layer tube. The LE inner is coated with an aluminum film to further improve spatter resistance and the strongest specification for sputter tubes

Polyolefin Resin Tube Clean Pipes (Flexible) PL

NITTA

[Features]・ A clean tube that uses clean air, N2 gas, pure water, or various chemicals,etc., as a fluid, and is suitable for installation and applications.・ Environmentally friendly eco-type tube. Carbon dioxide is the only gas generated during incineration (750°C), and no toxic gases such as nitrogen oxides (NOx) and sulfur oxides (SOx) are generated. No dioxin is generated・ Manufactured in a cleanroom, the tube terminal is sealed with a cap, and shipped in heat-sealed packaging・ Uses a special polyolefin resin with excellent moisture barrier properties and flexibility・ Economical compared to fluoropolymer tubes・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

Touch Tube TE Water-Resistance Polyurethane Tube

CHIYODA

A polyurethane tube with excellent water and oil resistance, suitable for equipment piping.[Features]・ Air leaks are hard to occur and tubes can be attached and removed smoothly・ Piping is possible regardless of air or industrial water・ It has excellent flexibility and the minimum bending radius of the tube is smaller than other tubes, so it can be used for piping in narrow places・ Excellent mechanical strength, especially abrasion resistance, ideal for equipment piping and robot piping・ Excellent outer diameter accuracy・ Prints cut marks at 1-m intervals, ideal for cutting work and inventory management・ Easy to check the remaining number[Applications]・ Most suitable for industrial water piping, air piping in general (equipment piping, equipment piping, air tools, etc.)

Touch Spiral Wrap Tube TPS

CHIYODA

A polyurethane spiral wrap with excellent water and oil resistance, suitable for equipment piping.[Features]・ Excellent in water resistance and oil resistance, ideal for factory environment・ Hard to break and flexible・ Excellent wear resistance・ The fitting connection part has an excellent outer diameter system to prevent pipe disconnection and leakage・ Inheriting the features of TE tube as it is・ Quick-connect fittings can also be used[Applications]・ Ideal for all industrial water piping and air piping driving points (equipment piping, robots, conveyors, etc.)

Urethane Tube for General Air Pressure (High Pressure Type) U1

NITTA

【Features】 · Usable in the pressure area higher than U2 tube Since it uses the coterie based polyurethane resin, deterioration of erosion due to moisture and mold at high temperature and humidity. happens less. Coil machining and welding machining are possible. •Related Keywords: NITTA, Tube / Tube Related Parts

Nylon

KOGANEI

Low water absorption, with excellent water resistance, dimensional stability, abrasion resistance, and weatherproofing.

Straight Fluororesin (PFA) Tube for Piping in Clean Environments

PISCO

[Features]・ Excellent chemical resistance, heat resistance and weather resistance.・ Wide operating temperature range.・ High inner surface smoothness, transparency, and purity.・ After cleaning with clean air, it packages in a cleanroom (equivalent to ISO class 6).・ The manufacturer offers inch sizes as semi-standard product, which are ideal for use in conjunction with SUS316 tightening fitting inch size.[Applications]・ Ideal for use in chemistry, medical, pharmaceutical, food, etc.

Cable and Hose Protection, Guide Device for Accommodating A Straight Slip Polyurethane Tube

PISCO

Polyurethane tubes with excellent flexibility, ideal for compact piping.[Features]·The coefficient of friction of the tube material is low, protecting cables and hoses, and preventing scraping and breakage in the guide device.·It has excellent flexibility and is ideal for compact piping that requires a small bending radius.·The coefficient of friction is 1/3 of that of polyurethane tube (UB).·As a result of the experiment of sliding the weight on the film-shaped tube material, the coefficient of friction was 1/3 of UB.·Cut marks are displayed at intervals of 500 mm, which is useful when cutting the tube.[Application]·Ideal for cable/hose protection and piping inside guidance devices.·The tubes are available in a wide range of colors and are ideal for applications such as mold and die ejection.

Multi-Straight Tube

CHIYODA

A straight tube that uses a variety of different color variations to make pipe identification easy.[Features]· Directly inherits the features of TP tubing.· Can be connected using a one touch fitting without leaving marks during peeling via special welding .· Pipe identification is made easy through color variation wherein a different color can be used for each pipe.· Ideal for locations where horizontal piping is difficult or when many pipes are used

Chiyoda Polyurethane Hose

CHIYODA

A soft air Hose suitable for low pressure robot piping.[Features]・ Excellent in oil resistance, ideal for air piping in the factory・ Excellent flexibility・ Very soft tube allows for very easy connection to hose fittings[Applications]・ Most suitable for all air piping (equipment piping, air tools, etc.)

Flame Retardant Tube for Spot welded Pipes for (2 Layers) FW

NITTA

Flame Retardant Tube FW is UL94 Size V-0 with excellent digestibility In addition, both inner and outer layers have a two-layer structure using flame retardant resin, with the mark indicating the insertion length on the length. •Related Keywords: NITTA, Tube / Tube Related Parts

Junflon High-Barrier PFA Tube

JUNKOSHA

[Features]・ Fluoropolymer tube with excellent barrier properties・ Hybrid tube with fluoropolymer PFA for the inner layer and barrier fluoropolymer for the outer layer・ The inner layer of the liquid wetted parts uses PFA for semiconductors and has high basic characteristics (purity, chemical resistance, non-adhesion, heat resistance) for semiconductor piping applications・ Barrier fluoropolymer has excellent barrier properties against acids (hydrochloric acid, nitric acid, etc.) and ammonia・ Suppresses acid permeation compared to conventional PFA tube piping・ Reduces adverse environment to the surrounding environment・ Maintains fluid transparency for a long time・ Mechanical properties are equivalent to conventional PFA tubes・ Manufactured in a clean environment that is consistently controlled from raw material input to molding and packaging[Applications]・ Tube for semiconductor / liquid crystal manufacturing equipment・ Tube for solar battery panel manufacturing equipment・ Tube for chemical supply / cleaning device・ Tube for chemical plant

Junron UF (Water-Resistant Flexible Polyurethane Tube)

JUNKOSHA

[Features]・ Excellent mechanical strength, especially abrasion resistance・ It has excellent heat and cold resistance・ Resin no-load continuous operating temperature -40 to +80°C・ Flexible and has high impact resilience・ No risk of elution of toxic substances・ Small bending radius and excellent workability[Application]・ Tube for pneumatic equipment・ Tube for fluid element・ Pneumatic tube for chemical plant

Urethane Foam Braid Tube (with Coupling for Lock Type Tubing)

TRUSCO NAKAYAMA

[Features]● Superior in oil resistance, pressure-resistance, and flexibility at low temperature (-5°C).● Compatible with common coupling.

Fluoropolymer Tubing (PFA) Inch Size, TILM Series

SMC

Fluoropolymer tubing (PFA) with superior heat resistance, inch size, TILM series. [Features] · Uses highly chemical-resistant fluoropolymer. [Applications] · Used in manufacturing of solar cells, liquid crystals, hard disk drives, and in the health care and food industries.

Flame Retardant (Equivalent To UL-94 Standard V-0) FR Soft Nylon Tubing TRS Series

SMC

Flame-retardant tubing. [Features]· Maximum operating pressure 1.2 MPa or less (at 20°C)· For use in environments where spatter may occur / Flame retardant (equivalent to UL-94 standard V-0)[Applications]· Suitable for air and water piping in environments with sparks from spot welders, etc.

Mega Touch Tube MTP Polyurethane Tube

CHIYODA

A polyurethane tube with a wide inner diameter and a large flow rate.[Features]・ Air leaks are hard to occur and tubes can be attached and removed smoothly・ Can be used for air and industrial water piping・ It has excellent flexibility and the minimum bending radius of the tube is smaller than other tubes, so it can be used for piping in narrow places・ Prints cut marks at 1-m intervals, ideal for cutting work and inventory management・ Excellent oil resistance・ Excellent outer diameter accuracy[Application]・ Most suitable for industrial water piping, air piping in general (equipment piping, equipment piping, air tools, etc.)

P-Flex Series, Hot-Water-Resistant Polyurethane Tube

CHIYODA

Polyurethane tube for cooling water.[Features]・ Ideal for cooling water piping. A material that is extremely resistant to hot water, ideal for cooling water piping, and can be used with air・ Excellent oil resistance. Ideal for factory air and industrial water piping・ Excellent outer diameter accuracy. Outer diameter accuracy is listed in the specification column・ Excellent heat resistance・ Excellent flexibility. Very small bend radius and easy to handle[Application]・ Cooling water piping in general (Molds, robots, etc.)

Cover Tube Spatter Preventing Polyurethane Tube

CHIYODA

Sputter prevention tube which uses chloroprene rubber on the outer skin. [Features]· For air only; directly inherits the features of TP inner. · Wide range of color variation, which is convenient for pipe management. · Two-layer tube with chloroprene rubber used for the outer skin

Polyolefin Resin Tube Clean Pipes (Ultra-Flexible) PN

NITTA

[Features]・ A clean tube that uses clean air, N2 gas, pure water, or various chemicals,etc., as a fluid, and is suitable for installation and applications.・ Environmentally friendly eco-type tube・ Carbon dioxide is the only gas generated during incineration (750°C), and no toxic gases such as nitrogen oxides (NOx) and sulfur oxides (SOx) are generated・ No dioxin is generated・ Manufactured in a cleanroom, the tube terminal is sealed with a cap, and shipped in heat-sealed packaging・ Uses a special polyolefin resin that has excellent moisture barrier properties and is even more flexible than PL tubes・ Economical compared to fluoropolymer tubes・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

Urethane Braided Tube

TRUSCO NAKAYAMA

[Features]● Approximately 1/3 to 1/5 the weight of a rubber hose.● Superior in oil resistance, pressure-resistance, and flexibility at low temperature (-5°C).

Polyurethane Braided Hose Flameproof type with Coupling

TRUSCO NAKAYAMA

[Features]● Made of flame-retardant polyurethane resin to prevent melting and fire due to sparks during sputtering.● Features lightweight, flexibility and abrasion resistance compatible to polyurethane hose for easy handling.● Water-resistant polyurethane outer layer is weatherproof for outdoor use.● Can be cut to the required length for the application and location.[Application]● Controllers for pneumatic devices and instrumentation.

Water-Resistant Polyurethane TE Twin Touch Tube

CHIYODA

A water-resistant twin-touch type with a line that makes it easy to identify the piping.[Features]・ Use TE tube: Inheriting the features of TE tube as it is・ Includes line on one side: Easy identification of piping・ Quick-connect fittings can be used: Due to special welding, no marks remain when peeling, and connection with a quick-connect fitting is possible

Touch Tube, TE-EP Antistatic Polyurethane Tube

CHIYODA

Prevents build-up of static electricity and dust adhesion.

Multi Spiral Wrap MPS Type

CHIYODA

Colorful air piping multi-core spiral wrap with excellent flexibility.[Features]・ The touch tube is bundled into multiple cores and processed into a coil. Ideal for telescopic piping・ A wide variety (204 standard types) are available. Possible to select according to operating environment・ Both ends of the straight part are 200 mm, allowing fine adjustment of the operating range・ Excellent abrasion resistance・ Inheriting the same features as TP tubes・ Quick-connect fittings can be used[Applications]・ Most suitable for all air pipe drive locations (internal piping, robots, conveyors, etc.)

Slim L-Flex Sputter Preventing Polyurethane Tube

CHIYODA

Tube with flexibility in addition to sputtering resistance. [Features]· Achieves both sputtering resistance and flexibility. By thinning the outer skin of a conventional L-Flex tube, sputtering resistance is improved and excellent flexibility is provided. · Lightweight 25% lighter weight compared to conventional L-Flex tubing. · Excellent outer skin peeling properties. The outer skin is easier to peel and construction is easier than with conventional two-layer tubing

Spiral Air Hose, Yellow Line SPH Type

CHIYODA

[Features]· Spiral tube with excellent flexibility and oil resistance

Flame Retardant Tube, for Spot Welding Piping (Flexible) FWU

NITTA

It is highly extinguishable due to the flame retardant resin of the outer layer (equivalent to UL94 standard V-0) and because ether-based polyurethane resin is used for the inner layer, there is less erosion and deterioration by moisture and mold at high temperature and humidity. •Related Keywords: NITTA, Tube / Tube Related Parts

Fluoropolymer Tube TA, Clean, Heat Resistant, Cold Resistant, Chemical Resistant

NITTA

[Features]・ Uses PFA (tetrafluoroethylene / perfluoroalkyl vinyl ether copolymer) resin with excellent chemical resistance・ Manufactured in a cleanroom, the tube terminal is sealed with a cap, and shipped in heat-sealed packaging・ It has excellent cleaning properties and reduces the adhesion of chemicals・ A tube that does not change over time and has excellent weather resistance・ It can be used even in an environment such as an ozone atmosphere・ Can also be used for the clean fitting "Chemfit CSE Series"・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

Junflon Spattering Tube (Tube for Spot Welder), Junflon SP4 (Two-Layer Spattering Tube)

JUNKOSHA

[Features]・ Double tube with flame-retardant special resin stacked, this special resin prevents sparks・ It is highly flexible and has excellent water resistance[Applications]・ Spot welding robot / clamp jig water and air line tubes・ Tube for pneumatic equipment

Flame-Resistant (Equivalent To UL-94 Standard V-0) FR Three-Layer Polyurethane Tubing, TRTU Series

SMC

Triple-layered, flame-resistant (equivalent to UL-94 standard V-0) polyurethane tubing, TRTU series. [Features]· Includes an aluminum layer between the outer sheath and the inner tube for improved spatter resistance. [Applications]· Suitable for air and water piping in environments with sparks from arc welders, etc.

Antistatic Tubing TA Series

SMC

Tubing to which measures against static electricity have been applied. [Features]· Maximum operating pressure 1.2 MPa or less (at 20°C).· For pneumatic piping and applications which require measures against static electricity.· Flame-retardant tubing (equivalent to UL-94 standard V-0).· Fluid: air.· Color: black. [Applications]· For preventing static electricity.

Clean Tubing, Polyolefin Tubing, TPH Series (20 m / 100 m)

SMC

A RoHS-compliant clean tube. [Features] · Applicable fittings: clean one-touch fitting, metal one-touch fitting KQB2 Series. · Applicable fittings: SUS316 one-touch fittings KQG2 series, insert fittings. · Colors: white (material color) / black (opaque) / red (opaque) / blue (opaque) / yellow (opaque) / green (opaque). · Length: 20 m roll / 100 m roll.

Urethane Tubes, TE Series

TAIYO

Features excellent flexibility. Has excellent diametral accuracy and is safe for use with single-touch fittings.[Features]• The burst pressure is as high as 3.0 MPa (at 20°C), allowing for use in a wide range of applications.· Excellent flexibility.• The bending radius is smaller than conventional types.• A series of ⌀12 types are also available.• Has excellent diametral accuracy and is safe for use with single-touch fittings.

Twin Touch Tube TP Polyurethane Tube

CHIYODA

Lined twin touch type with simplified pipe identification.[Features]· Uses TP tubing: inherits the features of TP tubing.· Simplifies identification of single side lined piping.· One-touch fitting supported: Connectible with a one-touch fitting via a special welding process that leaves no marks during peeling

Water Resistant Multi-Spiral Tubes MES Series

CHIYODA

These spiral tubes feature superior water resistance.

Twin L-Flex Sputter Preventing Polyurethane Tube

CHIYODA

[Features]· Directly inherits the features of the TE tube.· A sputter-preventing tube optimal for in-out piping

Thick-Diameter Curl Hose, GSL Type

MUROMOTO TEKKO

Suited for work requiring a short total length in the curled part and a large flow rate (when the flow rate of the current hose is insufficient). Tube internal diameter × external diameter = 8 × 12

Antistatic Tube - General Pressure (Conductive) UE

NITTA

【Features】 The antistatic tube UE uses conductive polyurethane elastomer. There is not static and spark is prevented.(Surface Resistance 105Ω ~ 103Ω). Excellent flexibility •Related Keywords: NITTA, Tube / Tube Related Parts

Flame-Retardant Tube for Spot Welding Piping FS

NITTA

Flame retardant tube FS has excellent self-extinguishing capabilities corresponding to UL94 Standard V-0. Excellent flexibility due to single layer structure. Marking is added to total length for indicating insert length.

TOMBO No. 9003-BT, Nylon BT Tube

NICHIAS

Tube with superior flexibility and transparency which employs a single type of fluorine resin. Suitable for use for piping in narrow spaces.[Features]· Bends easily and thus is not prone to buckling even when the turning radius is tight.· More transparent than normal PTFE tubes.