One-Touch Fitting（Applicable Fluid：Water Page4）

One-Touch Fitting KQ2 Series, Branch Male Elbow KQ2LU (With Sealant/Without Sealant)

SMC

A wide variety of quick-connect fittings by SMC.[Features]・ Lightweight and compact・ Vacuum from -100 kPa can be used・ Improved tube insertion and removal[Applications]・ Used for branch piping in the direction perpendicular from the female thread section

CAD ：

2D / 3D

Quick-Connect Fitting KQ2 Series Double Branch Universal Elbow KQ2ZD

SMC

SMC quick-connect fitting.[Features]・ Improved tube insertion and removal・ Compact and weight reduced[Applications]・ Used for 4-branch piping in the direction perpendicular from the female thread section. Tube mounting direction is free and 2 independent[Please click here for the catalog]・ Applicable metric tube outer diameter, P.116, imperial, P.146* Made-to-order / clean series P.131, 156

CAD ：

2D / 3D

Plug-In Y KQ2U, One-Touch Fitting KQ2 Series

SMC

One-touch fitting for which repiping is possible. [Features]· Improved tube insertion and removal.· Compact, lightweight.· Can be used in vacuum to -100 kPa. [Applications]· Use to branch into two in the same direction in line with the one-touch fitting.

CAD ：

2D / 3D

Female Elbow 10-KQ2LF, One-Touch Fitting

SMC

One-touch fitting by SMC. [Features]· One-touch insertion and removal.· Can be used in vacuum to -100 kPa.[Applications]· Use to pipe a male thread at right angles.

Male Connector KPH Clean One-Touch Fitting

SMC

A one-touch coupling from SMC Corporation. [Features]· A one-touch fitting; ideal for blowing type systems in clean rooms.· Completely oil-free processing. (rubber parts are fluorine coated)· Liquid-contact areas are non-metallic.· Parts are cleaned, assembled and double packaged in a clean room.· Can also be used in vacuums. (-100 kPa) [Applications]· Use to connect piping in the same orientation from female threads.

CAD ：

2D / 3D

Union Tee KRT-W2 Flame Retardant (UL-94 Standard V-0 Equivalent) FR One-Touch Fitting

SMC

A one-touch coupling from SMC Corporation. [Features]· Can be used with FR soft nylon.· High holding force.· Can be used for everything from low vacuums to 1 MPa.· Little force required for removal.· Effective for piping in tight spaces. [Applications]· Use for branch connection of tubes on both sides in a 90° orientation.

CAD ：

2D / 3D

Bulkhead Female Union Fitting KQ2E-G One-Touch Pipe Fitting

SMC

SMC's quick-connect fitting.[Features]・ Single-action attachment/release・ Vacuum -100 kPa can be used[Applications]・ Used for wire-to-wire connection of male threads and tubes for panel mounting, etc.

CAD ：

2D / 3D

Bulkhead Union Fitting KQG2E, SUS316 One-Touch Pipe Fitting KQG Series

SMC

SMC One-Touch fitting. [Features]· Compact and lightweight.· Grease-free.· Can be used with steam.· Metal part: SUS316, Seal part: special FKM.· Working fluid temperature: -5 to +150°C· Conforms to the Food Sanitation Act of Japan. (Part materials conform to the tool and packaging container standards test.)[Applications]· Used as a relay connection between tubes when mounting panels, etc.

CAD ：

2D / 3D

Female Union Fitting KQG2F, SUS316 One-Touch Pipe Fitting KQG Series

SMC

One-touch fitting used for piping from a male thread. [Features]· Compact and lightweight.· Working fluid temperature: -5 to +150°C· Materials: metal parts; SUS316, seal part; special FKM.· Non-grease. Can be used with steam.· Conforms to the Food Sanitation Act of Japan. [Applications]· Use to pipe from male threads, such as on pressure gauges.

CAD ：

2D / 3D

Quick-Connect Fitting for Clean Environment Friendly Piping, Elbow, Thread Section Material Polypropylene

MISUMI

[Features]·A quick-connect fitting suitable for clean environments. ·The thread section material is polypropylene.

• Volume Discount

CAD ：

2D / 3D

For General Piping, Tube Fitting, Triple Branch A

PISCO

A complete line of quick connect fittings.[Features]· Quick-connect fitting for general pneumatic piping.· After installation, you can change the take-off angle of the resin main body. (applicable to some products)· Allows centralized piping.· Light gray specifications and cleanroom packaging specifications are also available as options.· The cleanroom packaging specification uses fluorine-based grease.· The product is washed with clean air and then packaged in a cleanroom (ISO class 6 equivalent).[Applications]· The standard specifications enable the use of water and are ideal for temperature control of molds and dies.· After installation, you can change the take-off angle of the resin body. (applicable to some products)

CAD ：

2D / 3D

Tube Fitting for General Piping - PT Jack

PISCO

Standard quick-connect fitting for general piping.[Features]·A wide lineup of products.·After installation, you can change the take-off angle of the resin body.·17 shapes have been updated, achieving weight reduction.·High performance and high quality. The lock claws evenly grip the circumference of the tube. Even after many years, tubes still attach and detach like new. Unique elastic sleeve design shuts out air leaks.·Enables centralized piping.·A wide assortment of sizes of reducings is available. 1 fitting can be used where conventionally 2 fittings were required. By reducing the number of fittings used, you can reduce costs and space.·A cleanroom packaging specification that is ideal for piping in a clean environment (optional). Fluorine-based grease is used as the grease, and after being washed with clean air, it is packaged in a cleanroom (equivalent to ISO class 6).·With clean washing specifications ideal for various particle- and oil-averse production processes (optional). The product is vacuum sealed after ultrasonic vacuum cleaning with HFE (hydrofluoroether) in a cleanroom.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Long Elbow

PISCO

A wide variety of single action fittings for general piping.[Features]· Single action fitting for general pneumatic piping.· After mounting, the resin unit's removal angle can be changed.· An extensive lineup of products.· Allows for centralized piping.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Bulkhead Union Elbow

PISCO

Many types of one-touch fittings for standard piping.[Features]· One-touch fitting for general pneumatic pipes.· Can change the take-off angle of the resin body after mounting.· Diverse lineup.· Centralized piping is supported

CAD ：

2D / 3D

For Spatter-resistant, Tube Fitting Brass Elbow

PISCO

The main body and release ring are made of brass for superior flame retardancy and sputtering resistance.[Features]· Available sealing rubber materials include HNBR, FKM, and NBR.· Ideal for environments exposed to sparks.· Release ring made of brass offers excellent flame retardancy and sputter resistance.· The type with a cover prevents dust and sputter from getting through to the internal fittings.· An optional sputter cover prevents fine sparks from entering.· By using a release ring cover (CS – sold separately), sparks that penetrate through the gap between the release ring and the tube cannot get close.

Push One E Series 90° Elbow

NITTA

[Features]・ The tube is a push-one connection・ No jigs or tools are required to connect the tubes・ Electroless nickel plating treatment is applied・ There is little deterioration of the surface and elution of copper ions into the fluid is prevented・ Uses flame-retardant resin (equivalent to UL94 standard V-0)・ Uses flame-retardant PBT resin as material・ Equivalent to UL94 V-0 and has excellent self-extinguishing property・ It can be used even in an environment where spatter is scattered・ Sealing on tapered male thread・ No need to wrap sealing tape

CAD ：

2D

One-Touch Fitting KQ2 Series Universal Female Elbow KQ2VF (Sealant, No Sealant)

SMC

SMC quick-connect fitting.[Features]・ Improved tube insertion and removal・ Compact and weight reduced[Applications]・ Used for branching in the same direction and 90 degree direction from both female and male threads, multiple connections are also possible[Please click here for the catalog]・ Applicable metric tube outer diameter, connection thread "R, Rc" release bushing, oval (P.14) Perfect circle (P.113)・ Applicable tube imperial outer diameter, connection thread "NPT" release bushing, oval (P.38) perfect circle (P.143)

CAD ：

2D / 3D

One-Touch Fitting KQ2 Series Hexagon Socket Head Male Connector KQ2S (Motion Gasket Seal)

SMC

A one-touch male connector fitting with hex socket head (KQ2S) and gasket seal from SMC. [Features]· Improved tube insertion/removal.· Compact and light weight. [Applications]· A male connector with a hexagonal head that can be tightened with a hex wrench. Ideal for use in confined spaces. [See here for catalog]· Applicable tube outer diameter (metric), Connection thread [G], Release button: oval (pp. 60) / circle (pp. 168)· Applicable tube outer diameter (mm), Connection thread [R], Release button: oval (pp. 68) circle (pp. 176)· Applicable tube outer diameter (inches), Connection thread [NPT], Release button: oval (pp. 76) circle (pp. 188)

CAD ：

2D / 3D

Branch KQ2U (Gasket Seal), One-Touch Fitting KQ2 Series

SMC

One-touch fitting by SMC. [Features]· Improved tube insertion and removal.· Compact, lightweight. [Applications]· Use to branch into two in the same direction in line with the female thread.

CAD ：

2D / 3D

Different Diameter Plug-In Y KQ2X, One-Touch Fitting KQ2 Series

SMC

One-touch fitting by SMC. [Features]· Improved tube insertion and removal.· Compact, lightweight.· Can be used in vacuum to -100 kPa. [Applications]· Use to branch into two and connect tubing of reduced size in the same direction in line with the one-touch fitting.

CAD ：

2D / 3D

Color Cap KQ2 Series, One-Touch Fitting

SMC

One-touch fitting by SMC. [Features]· Improved tube insertion and removal.· Compact and lightweight.[Applications]Mount onto the release button and use different colors for piping according to applications.

Different Diameter Tee 10-KQ2T, One-Touch Fitting

SMC

One-touch fitting by SMC. [Features]· One-touch insertion and removal.· Can be used in vacuum to -100 kPa. [Applications]· Use to connect tubing of reduced size for branching on two opposite ends of the fitting both at 90° angles.

CAD ：

2D / 3D

Plug-In Reducer 10-KQ2R, One-Touch Fitting

SMC

Reducer fitting that enables one-touch insertion and removal. [Features]· Can be used in vacuum to -100 kPa.· The chuck provides secure retention and the collet increases the holding force on the tube.· The use of a special profile ensures sealing and reduces resistance when the tube is inserted.· Chuck is prevented from biting too deeply into the tube.· Body and thread part rotate allowing for positioning. [Applications]· Use to change size of one-touch fittings.

CAD ：

2D / 3D

Bulkhead Union 10-KQ2E (Interchangeable With KJ), One-Touch Fitting

SMC

Bulkhead union interchangeable with KJ type. [Features]· One-touch insertion and removal.· Can be used in vacuum to -100 kPa. [Applications]· Use to connect two pieces of tubing through a panel, etc.

Bulkhead Union 10-KQ2E One-Touch Fitting

SMC

An inch size bulkhead union. [Features]· One-touch IN/OUT connection.· Can be used with -100‑kPa vacuum. [Applications]· Use for relay (through-panel) connection of tubes for panel mounting, etc.

One-Touch Fitting Manifold KM12

SMC

A one-touch fitting from SMC. [Features]· Enables compact piping.· Allows centralized piping.· Broad series lineup (40 models.)· One-touch mounting.

CAD ：

2D / 3D

Flame-Retardancy FR Quick-Connect Fitting KR-W2 Series Universal Elbow Union KRV-W2

SMC

A one-touch coupling from SMC Corporation. [Features]· Can be used with FR soft nylon.· High holding force.· Can be used for everything from low vacuums to 1 MPa.· Little force required for removal.· Effective for piping in tight spaces. [Applications]· A male elbow for use in tight spaces. The hex head section on the body can be tightened with a socket wrench.

CAD ：

2D / 3D

Branch KRU-W2 Flame Retardant (UL-94 Standard V-0 Equivalent) FR One-Touch Fitting

SMC

A one-touch coupling from SMC Corporation. [Features]· Can be used with FR soft nylon.· High holding force.· Can be used for everything from low vacuums to 1 MPa.· Little force required for removal.· Effective for piping in tight spaces. [Applications]· Use for branch piping in the same orientation from female threads.

CAD ：

2D / 3D

Flame-Retardancy FR Quick-Connect Fitting KR-W2 Series Bulkhead Union KRE-W2

SMC

A flame retardant (UL-94 standard V-0 equivalent) one-touch fitting. [Features]· Supports FR soft nylon.· The chuck engages the work piece securely, while collet maximizes the retention force.· Its special shape ensures a secure seal and minimal resistance when inserting a tube. Can be used in everything from low vacuums to 1 MPa.· Effective for piping in tight spaces.· The body and threaded section can be rotated enough to allow for positioning. [Applications]· Can be used for relay (through-panel) connection of tubes for panel mounting, etc.

CAD ：

2D / 3D

Bulkhead Union KGE Stainless Steel One-Touch Fitting, KG Series.

SMC

SMC One-Touch fitting. [Features]· Stainless steel specifications for use in corrosive environments.· SUS303 is used for metal parts.· Suitable for use in CRT production lines where contact with copper must be avoided, as well as cleaning of food processing machines where water or salt water splashes.· Suitable for use inside clean rooms where discoloration of copper materials and dust caused by corrosion must be avoided. [Applications]· Used to connect tubes through a panel.

One-Touch Couplings for Clean Applications - Union Elbows

MISUMI

[Features]·A quick-connect fitting suitable for clean environments. [Material]·It is polypropylene.

• Volume Discount

CAD ：

2D / 3D

Tube Fitting PP Type Bulkhead Union P for Clean Environments

PISCO

[Features]· The main body uses PP resin suitable for clean environments.· EPDM is utilized in the seal.· FKM and NBR types are available as optional extras.· PP or SUS304 can be selected for the screw element.· Use of oil permitted.· Plastic body is clear colored to allow water flow to be observed.· Two packaging specifications--normal packaging and clean room packaging--are available according to the desired application.

CAD ：

2D / 3D

for Chemicals, Tube Fitting Chemical Type Union Straight

PISCO

PPS is used for the main body material for excellent heat resistance, flame retardancy, and chemical resistance.[Features]· PPS is used for the main body material for excellent heat resistance, flame retardancy (UL94V-0), and chemical resistance.· FKM is a use option for the seal. Other options include NBR and EPDM.· None of the parts used must be exposed to grease.· Also compliant with the Food Sanitation Law of Japan (FKM type only).· No need to worry about rust or metal ions.· Two packaging specifications are available to suit the application, normal packaging and clean room packaging.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Cross-A

PISCO

Tube fitting for various types of piping with a rich lineup.[Features]·Water can be used depending on the conditions.·High performance and high quality. The lock claws evenly grip the circumference of the tube. Even after many years, tubes still attach and detach like new.·Unique elastic sleeve design shuts out air leaks.·Industry-leading range of variations. 1 fitting can be used where conventionally 2 fittings were required.·By reducing the number of fittings used, you can reduce costs and space. After installation, you can change the take-off angle of the resin body.[Applications]·Used to connect tubes in 3 directions, straight and at right angle. (All tube outlets have the same diameters)·This product has boss holes, which can be used to fix it to a wall surface or connect-and-fix it.

CAD ：

2D / 3D

for General Piping, Tube Fitting Branch Triple

PISCO

Variety of types available with one-touch fitting for general piping.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Female Universal Elbow

PISCO

Tube fitting for various types of piping with a rich lineup.[Features]·Water can be used depending on the conditions.·High performance and high quality. The lock claws evenly grip the circumference of the tube. Even after many years, tubes still attach and detach like new.·Unique elastic sleeve design shuts out air leaks.·Industry-leading range of variations. A wide assortment of sizes of reducings is available. 1 fitting can be used where conventionally 2 fittings were required.·By reducing the number of fittings used, you can reduce costs and space. After installation, you can change the take-off angle of the resin body.[Applications]·Used for connecting tubes in 2 directions from the female thread side at right angle.·Plural sliders can be joined.

CAD ：

2D / 3D

for Sputtering Resistance, Tube Fitting Brass Tee, No Cover

PISCO

The main body and release ring are made of brass for superior flame retardancy and sputtering resistance.

Sputtering Resistant Tube Fitting Brass Union Elbow

PISCO

The main body and release ring are made of brass for superior flame retardancy and sputtering resistance.[Features]· Available sealing rubber materials include HNBR, FKM, and NBR.· Ideal for environments exposed to sparks.· Release ring made of brass offers excellent flame retarding and sputter resistance. The cover type prevents sputtering inside fitting and dust intrusion.· An optional spatter cover that shuts out fine sparks.▪By placing a release ring cover (CS) that is sold separately, sparks cannot enter even through the small gap between the release ring and tube

Tube Fitting Plus Union Straight for Sputtering Resistance

PISCO

The main body and release ring are made of brass for superior flame retardance and sputtering resistance.[Features]· Available sealing rubber materials include HNBR, FKM, and NBR.· Ideal for environments where exposure to sparks may occur.· Release ring made of brass offers excellent flame retardance and sputter resistance. Cover type prevents sputtering inside the fitting and dust intrusion.· An optional spatter cover shuts out fine sparks.· By placing a release ring cover (CS), sold separately, sparks that penetrate through the gap between the release ring and the tube can not get close

for Corrosion Resistance, Corrosion Resistant SUS303 Equivalent Fitting, Different Diameters Union Straight

PISCO

No copper-based metal used. Also optimal for dealing with low-concentration ozone .[Features]· Perfect when additional strength is required for corrosive atmosphere applications.· Metal body uses special stainless steel for which corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).· Copper based metal is not used.· HNBR has been utilized in the sealing rubber material in order to cope with low-concentration ozone.

CAD ：

2D / 3D

Touch Connector Five Union

CHIYODA

A low-weight quick-connect fitting that allows you to easily attach and detach the air tube.[Features]· Cost-effectiveness by thorough material reduction. Achieves thorough cost-effectiveness by eliminating unnecessary parts and forming with the smallest parts· Weight reduction by thorough material reduction. Partial body made of resin to further reduce weight· New-type lock ring employed. Realizes a joint function for smooth and reliable piping work· New-type ring seal employed. Reducing connection operation force while maintaining high airtightness・ All items are laser marked. The model number of all items is described on the product・ Flame-retardant body. Flame-retardant resin standard adoption· Thread section sealing (tapered male thread). Due to the thread section sealing, piping is possible as it is.· Flexibility of the threaded top portion. The body of the elbow, branch tee, etc., and the thread section can be rotated (Not a rotary type. The all resin type does not rotate)・ Two colors of white and black can be selected for the body resin part[Applications]・ Most suitable for industrial water piping, air piping in general (equipment piping, equipment piping, air tools, etc.)

CAD ：

2D

Chemifit C1 Series Union Tee, EUT-C1

NITTA

The EUT-C1 union tee is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

CAD ：

2D

Chemifit C1 Series, Connector EC-C1

NITTA

[Features]・ Completely oil-free processed product. Parts are washed and assembled in a cleanroom. No fats or oils are used in the sealing material・ The tube is connected by a PushOne Fitting: No jigs nor tools are required for connecting the tube. No jigs or tools are required to connect the tubes・ Non-metallic wetted parts. Since the fluid does not touch the metal, there is no elution of metal ions・ No dust generation and has excellent non-polluting properties. Made of special polypropylene resin・ Has excellent inner surface smoothness. Since it is an injection molded product, the inner surface is smooth.・ Double clean packaging. Packed one by one in a cleanroom and then packed in a zipper seal bag・ The body and adapter rotate. Elbows and tees can be oriented when piping・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

CAD ：

2D

Junron One-Touch Fitting M Series (for General Piping) Bulkhead Union

JUNKOSHA

[Features]· Electroless nickel plating is as standard applied to metal parts.· The nickel plating in all brass parts of M series nipples and plastic bodies is standardized.· Color seal for seal identification.· Each of the different types of R (PT) screws is coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).· You can position the body in accordance with the removing direction of the tube.・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.▪ The tube grip comes with a rotating mechanism.▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.

CAD ：

2D

Junlon One-Touch Fitting M Series (for General Piping) Bulkhead Female Union

JUNKOSHA

[Features]· Electroless nickel plating is applied as standard to metal parts.· All brass parts in the M series nipples and plastic bodies have nickel plating applied as standard.· Comes with a color seal for screw identification.· Each of the different types of R (PT) screw are coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).· You can position the body in accordance with the removal direction of the tube.・R (PT) screw parts in elbows and Tees, and the resin mating parts rotate, allowing for free positioning according to the removal direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is still fixed.▪ The tube grip comes with a rotating mechanism.▪ The tube grip rotates smoothly in the fitting, stopping the tube from turning.

CAD ：

2D