(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Nuts（Page2）
|
Nut Type
|
|
|---|---|
Brand |
|
Filter By |
|
| CAD |
|
| Days to Ship |
|
190 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
5 Series Stopper - Integrated Pre-Assembly Insertion Nut, Steel
MISUMI
·Product that integrates a pre-assembly insertion nut and a pre-assembly insertion stopper. You can also purchase each part individually.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 5 Series M3 / M4 / M5 Stainless Steel ～ Steel With Stoppers Not Provided From: 15,013 VND Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
Long Nuts for Aluminum Frames - For 5 Series (Slot Width 6mm) -Long Nuts L Dimension Fixed Type
MISUMI
These are long nuts with fixed length (L dimension). Workpieces such as slide guides can be attached to the frame at any pitch. It can also be used for adding frames.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Long Nuts MISUMI 5 Series - Stainless Steel ～ Steel - Not Provided From: 56,301 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Pre-Assembly Insertion Offset Nuts for Aluminum Frames - For 8 Series (Slot Width 10mm)
MISUMI
The tapped hole position is eccentric. By using it together with a pre-assembly insertion double joint, the nut can be fixed without protruding from the frame even if connecting at the corner of the frame.
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 8 Series / MISUMI 8-45 Series - Stainless Steel Eccentricity Not Provided From: 17,724 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyT-Bolt For Aluminum Frames_VNM
MiSUMi EconomyMISUMI
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock T-Bolts MISUMI, European Standard, Groove Width: 8 mm, Dedicated for Aluminum M6 / M8 - - - From: 1,584 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock T Nut MISUMI, European Standard, Groove Width: 6 mm, Dedicated for Aluminum / MISUMI, European Standard, Groove Width: 8 mm, Dedicated for Aluminum / MISUMI, European Standard, Groove Width: 10 mm, Dedicated for Aluminum M4 / M5 / M6 / M8 Steel Economy - From: 650 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long Nuts for Aluminum Frame - For 6 Series (Slot Width 8 mm) - Long Nuts L Dimension Fixed Type
MISUMI
These are long nuts with fixed length (L dimension) of 450 mm. Workpieces such as slide guides can be attached to the frame at any pitch. It can also be used for adding frames.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Long Nuts MISUMI 6 Series - Stainless Steel ～ Steel - Not Provided From: 96,754 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
5 Series Post-Assembly Insertion Stopper Nut【1-100 Pieces Per Package】
MISUMI
Nuts coated with anti-loosening agents, nuts with conductive functions, etc., are available.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 5 Series M3 / M4 / M5 Stainless Steel ～ Steel Standard Provided / Not Provided From: 8,080 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Post-assembly insertion spring nut for aluminum frames with a built-in spring and a temporary stop function. You can easily move through the groove by pressing it lightly with your hand.
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 6 Series M3 / M4 / M5 / M6 Stainless Steel ～ Steel With Ball Springs Not Provided From: 1,391,744 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
T Nut【500-1,000 Pieces Per Package】
HAAFA
【Features】· Material : Zn Casting· Surface : Vibrating Barrel, Nickel(N)· It can be directly tightened by putting into the frame groove.(Very simple when panel working)
Nut Type Series Nominal of Thread M(mm) Material Function Lock T Nut - - Steel ～ Zinc Alloy - - From: 1,939,050 VND Days to Ship: Số ngày giao hàng: 6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Nut Holder, NH Series (Green/Red)【50 Pieces Per Package】
NIC AUTOTEC
Structural material for factory automation equipment
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Stoppers NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series - Plastic Plastic Stoppers - From: 248,556 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Square Nut (Steel, Pack of 50)【50 Pieces Per Package】
NIC AUTOTEC
Structural element of factory automation equipment. [Nut Type]Pre-assembly insertion nut; Material: Steel
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series M3 / M4 / M5 / M6 / M8 Steel Standard Not Provided From: 129,979 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
15mm Square Aluminum Frame Nut - 100pcs/Pack【100 Pieces Per Package】
MISUMI
Square nut that can be used with 15 mm square aluminum extrusion. This product is sold in packs (100 pcs. per pack). You cannot purchase by specifying the quantity.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 3 Series M3 Steel Economy Not Provided From: 200,806 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Lock Nuts with Leaf Springs
MISUMI
The leaf spring is welded to the lock nut. Because positioning can be done easily, it is convenient for places where panels and covers are frequently removed.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 5 Series M5 Steel With Locks Not Provided From: 18,766 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Lock Nuts
MISUMI
The position of the nut single piece can be fixed with the included set screw. It is convenient for places where panels and covers are frequently removed.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 5 Series M3 / M4 / M5 Stainless Steel ～ Steel With Locks Not Provided From: 6,180 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
The leaf spring is welded to the post-assembly insertion lock nut. Positioning is easy.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 6 Series M6 Steel With Locks Not Provided From: 19,392 VND Special Price Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Square Nut Set NHG/NHR Series (Steel, Pack of 50)【50 Pieces Per Package】
NIC AUTOTEC
Structural material for factory automation equipment
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series M3 / M4 / M5 / M6 / M8 Steel Nuts and Stoppers Set Not Provided From: 312,090 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YUKIGIKEN
[Applications]· Retrofitting nut, dedicated for 40 series frames. A wide range of parts can be screwed into the frame.
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts LECOFRAME 40 Series (For Medium/Heavy Structures) M4 / M5 / M6 / M8 Steel Standard Not Provided From: 123,116 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pre-Assembly Insertion Lock Nut - For 6 Series (Slot Width 8mm)
MISUMI
The position of the nut single piece can be fixed with the included set screw. It is convenient for places where panels and covers are frequently removed.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 6 Series M6 Steel With Locks Not Provided From: 16,681 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
6 Series (Groove Width 8 mm) Post-Assembly Insertion Lock Nut for 30/60 Square Aluminum Extrusions
MISUMI
A set screw is provided so that the nut itself can be fixed.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 6 Series M3 / M4 / M5 / M6 Stainless Steel ～ Steel With Locks Provided / Not Provided From: 6,700 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
These are long nuts with specifiable length (L dimension). The length can be specified from 50 mm
Nut Type Series Nominal of Thread M(mm) Material Function Lock Long Nuts MISUMI 6 Series - Stainless Steel ～ Steel - Not Provided Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pre-Assembly Insertion Screw - For 5 Series (Slot Width 6mm) Aluminum Frames
MISUMI
·It is a bolt-integrated nut. ·Labor-hours for bolting can be reduced.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock T-Bolts MISUMI 5 Series M5 Stainless Steel Conductive Not Provided From: 43,581 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Post Assembly Insertion Screw - For 6 Series (Slot Width 8mm) Aluminum Frames
MISUMI
·It is a bolt-integrated nut. ·Labor-hours for bolting can be reduced.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock T-Bolts MISUMI 6 Series M6 Stainless Steel Conductive Not Provided From: 43,581 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
It can be installed in a space saving manner. Compared to the post-assembly insertion nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories in succession.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 8 Series / MISUMI 8-45 Series M3 / M4 / M8 Steel Short, Rotating Not Provided From: 6,100 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
These are long nuts with specifiable length (L dimension). The length can be specified from 50 mm
Nut Type Series Nominal of Thread M(mm) Material Function Lock Long Nuts MISUMI 8 Series - Stainless Steel ～ Steel - Not Provided Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
This product integrates a pre-assembly insertion nut and a pre-assembly insertion stopper. You can also purchase each part individually.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 8-45 Series M4 / M5 / M6 / M8 Stainless Steel ～ Steel With Stoppers Not Provided From: 14,220 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyPost-Assembly T Bolt Sutainless Steel For Aluminum Frames【1-100 Pieces Per Package】
MiSUMi EconomyMISUMI
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock T-Bolts MISUMI, European Standard, Groove Width: 8 mm, Dedicated for Aluminum / MISUMI, European Standard, Groove Width: 10 mm, Dedicated for Aluminum M6 / M8 Stainless Steel Economy Not Provided From: 3,562 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NIC AUTOTEC
It can be used for the M6 and M8 series. [Materials]SS400 equivalent [Treatment] Trivalent chromate
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts NIC Autotec M6 Series / NIC Autotec M8 Series M6 / M8 Steel Standard Not Provided From: 150,008 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Post-Assembly Insertion Nut (Steel)
NIC AUTOTEC
Structural element of factory automation equipment. [Nut Type]Post-assembly insertion nut; Material: Iron
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series M3 / M4 / M5 / M6 / M8 Steel Standard Not Provided From: 48,750 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - Lock Nuts
MISUMI
The position of the nut single piece can be fixed with the included set screw. It is convenient for places where panels and covers are frequently removed.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 8 Series / MISUMI 8-45 Series M4 / M5 / M6 / M8 Stainless Steel ～ Steel With Locks Not Provided From: 17,724 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
T-Bolt or Special T-Bolt For Aluminum It is a fastener for connecting aluminum Frames brackets and steel plates, moreover, this nut can add on after the assembly machine structure [Features] • Post-Assembly: Mountable from slots after assembly • Suitable for: Aluminum Frames 4545 series (slot width 10 mm.) • Can support nut size: M8 • Thread distance: 20, 25, 35 and 40 mm. • Material: Carbon Steel Nickel-plated, anti-rust [Applications] Suitable for use with bolt and aluminum Frames 4545 series (slot width 10 mm.)., for assembling machine components
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock T-Bolts MISUMI, European Standard, Groove Width: 10 mm, Dedicated for Aluminum M8 Steel Economy Not Provided From: 2,972 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyPre-Assembly Standard Nut for AF China profiles _VNM
MiSUMi EconomyMISUMI
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Stoppers - M6 / M8 Steel Short, Rotating - From: 500 VND Days to Ship: Số ngày giao hàng: 4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
YUKIGIKEN
Aluminum post-assembly insertion nut dedicated for 40 series frames.[Features]・ There is no anodizing on the cut surface・ Long nut with 10 mm pitch tapped holes from 2 to 20 holes・ M4, M5, M6 thread diameter, the number of holes can be specified 2 to 20・ Material: A6063S・ Surface treatment: Clear anodizing[Applications]・ It is used to attach various parts to LECOFRAME
- CAD ：
- 2D
Nut Type Series Nominal of Thread M(mm) Material Function Lock Long Nuts LECOFRAME 40 Series (For Medium/Heavy Structures) M4 / M5 / M6 Aluminum Standard Not Provided From: 131,990 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pre-Assembly Insertion Lock Nut - For 5 Series (Slot Width 6mm)
MISUMI
The position can be fixed with the single nut by tightening the included set screw
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 5 Series M5 Steel With Locks Not Provided From: 8,360 VND Days to Ship: Số ngày giao hàng: Same day
Same day
-
You can add up to 6 items per a category to the compare list.
For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Short Nuts【1-100 Pieces Per Package】
MISUMI
It can be installed in a space saving manner. Compared to the post-assembly insertion nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories in succession.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 5 Series M3 / M4 / M5 Steel Short, Rotating Not Provided From: 15,013 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
It can be installed in a space saving manner. Compared to the post-assembly insertion nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories in succession.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 6 Series M4 / M5 / M6 Steel Short, Rotating Not Provided From: 19,181 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Pre-Assembly Insertion Offset Nuts - For 6 Series (Slot Width 8mm)
MISUMI
The tapped hole position is eccentric. By using it together with a pre-assembly insertion double joint, the nut can be fixed without protruding from the frame even if connecting at the corner of the frame.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Nuts MISUMI 6 Series - Stainless Steel Eccentricity Not Provided From: 16,056 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Post-Assembly Nut and Stopper Set - For 6 Series (Slot Width 8 mm) Aluminum Frame
MISUMI
This set product is less expensive than purchasing the nut and stopper separately.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 6 Series M3 / M4 / M5 / M6 Stainless Steel ～ Steel Nuts and Stoppers Set Not Provided From: 12,420 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
For 8 Series (Slot Width 10mm) - Post-Assembly Insertion Short Nut【1-100 Pieces Per Package】
MISUMI
It can be installed in a space saving manner. Compared to the post-assembly insertion nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories in succession.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 8 Series / MISUMI 8-45 Series M3 / M4 / M8 Steel Short, Rotating Not Provided From: 8,880 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NIC AUTOTEC
Structural material for factory automation equipment
Nut Type Series Nominal of Thread M(mm) Material Function Lock Pre-Assembly Insertion Stoppers NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series - Plastic Plastic Stoppers - From: 6,875 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YUKIGIKEN
[Applications]· Used to fix the Latch Handle 40 and the Hinge 40 to the 40 Series frame.
- CAD ：
- 2D
Nut Type Series Nominal of Thread M(mm) Material Function Lock Long Nuts LECOFRAME 40 Series (For Medium/Heavy Structures) M6 Steel Standard Not Provided From: 109,420 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YUKIGIKEN
[Applications]· F Nut 25, Long M4⇒ Used to fix the Latch Handle 25 and the Hinge 25 to the 25 Series frame.· F Nut 25, Long M5 ⇒ Used to fix the Leveler Plate 25 and the Anchor Plate 25 to the 25 Series frame.
- CAD ：
- 2D
Nut Type Series Nominal of Thread M(mm) Material Function Lock Long Nuts LECOFRAME 25 Series (For Light/Medium Structures) M4 / M5 Steel Standard Not Provided From: 103,648 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Post-Assembly Insertion Nut for 5 Series Aluminum Frames
MISUMI
Inexpensive post-assembly insertion nut that can be used without a stopper. Nuts coated with anti-loosening agents, nuts with conductive functions, etc., are available.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 5 Series M3 / M4 Stainless Steel ～ Steel Short, Rotating Provided / Not Provided From: 10,030 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
For 6 Series (Slot Width 8mm) - Post-Assembly Insertion - Short Nuts【1-100 Pieces Per Package】
MISUMI
It can be installed in a space saving manner. Compared to the post-assembly insertion nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories in succession.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 6 Series M3 / M4 / M5 / M6 Steel Short, Rotating Not Provided From: 10,190 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - Lock Nuts with Leaf Springs
MISUMI
The plate spring is welded to the post-assembly insertion lock nut. Positioning is easy.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Post-Assembly Insertion Nuts MISUMI 8 Series / MISUMI 8-45 Series M8 Steel With Locks Not Provided From: 20,435 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Flanged Nuts - For 8 Series (Slot Width 10mm) Aluminum Frames
MISUMI
Flanged nut. It can be used as the tip of pre-assembly insertion bolts, such as HNTLSN8-8-20.
- Volume Discount
Nut Type Series Nominal of Thread M(mm) Material Function Lock Flanged Nuts MISUMI 8 Series / MISUMI 8-45 Series M8 Stainless Steel - Not Provided From: 16,681 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Nut Type |
| Series |
| Nominal of Thread M(mm) |
| Material |
| Function |
| Lock |
You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.      | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | HAAFA | NIC AUTOTEC | NIC AUTOTEC | MISUMI | MISUMI | MISUMI | MISUMI | NIC AUTOTEC | YUKIGIKEN | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NIC AUTOTEC | NIC AUTOTEC | MISUMI | MISUMI | MISUMI | YUKIGIKEN | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NIC AUTOTEC | YUKIGIKEN | YUKIGIKEN | MISUMI | MISUMI | MISUMI | MISUMI |
| Product SeriesDòng sản phẩm | 5 Series Stopper - Integrated Pre-Assembly Insertion Nut, Steel | Long Nuts for Aluminum Frames - For 5 Series (Slot Width 6mm) -Long Nuts L Dimension Fixed Type | Pre-Assembly Insertion Offset Nuts for Aluminum Frames - For 8 Series (Slot Width 10mm) | Long Nuts for Aluminum Frame - For 6 Series (Slot Width 8 mm) - Long Nuts L Dimension Fixed Type | 5 Series Post-Assembly Insertion Stopper Nut【1-100 Pieces Per Package】 | 15mm Square Aluminum Frame Nut - 100pcs/Pack【100 Pieces Per Package】 | For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Lock Nuts with Leaf Springs | For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Lock Nuts | Square Nut Set NHG/NHR Series (Steel, Pack of 50)【50 Pieces Per Package】 | Pre-Assembly Insertion Lock Nut - For 6 Series (Slot Width 8mm) | 6 Series (Groove Width 8 mm) Post-Assembly Insertion Lock Nut for 30/60 Square Aluminum Extrusions | Pre-Assembly Insertion Screw - For 5 Series (Slot Width 6mm) Aluminum Frames | Post Assembly Insertion Screw - For 6 Series (Slot Width 8mm) Aluminum Frames | Post-Assembly T Bolt Sutainless Steel For Aluminum Frames【1-100 Pieces Per Package】 | For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - Lock Nuts | Pre-Assembly Insertion Lock Nut - For 5 Series (Slot Width 6mm) | For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Short Nuts【1-100 Pieces Per Package】 | Pre-Assembly Insertion Offset Nuts - For 6 Series (Slot Width 8mm) | Post-Assembly Nut and Stopper Set - For 6 Series (Slot Width 8 mm) Aluminum Frame | For 8 Series (Slot Width 10mm) - Post-Assembly Insertion Short Nut【1-100 Pieces Per Package】 | For 6 Series (Slot Width 8mm) - Post-Assembly Insertion - Short Nuts【1-100 Pieces Per Package】 | For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - Lock Nuts with Leaf Springs | Flanged Nuts - For 8 Series (Slot Width 10mm) Aluminum Frames | ||||||||||||||||||||||
| CADCAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
| From | 15,013 VND | 56,301 VND | 17,724 VND | 1,584 VND | 650 VND | 96,754 VND | 8,080 VND | 1,391,744 VND | 1,939,050 VND | 248,556 VND | 129,979 VND | 200,806 VND | 18,766 VND | 6,180 VND | 19,392 VND Special Price On Sale Till 31/03/2025 | 312,090 VND | 123,116 VND | 16,681 VND | 6,700 VND Special Price On Sale Till 31/03/2025 | 43,581 VND | 43,581 VND | 6,100 VND | 14,220 VND | 3,562 VND | 150,008 VND | 48,750 VND | 17,724 VND | 2,972 VND | 500 VND | 131,990 VND | 8,360 VND | 15,013 VND | 19,181 VND | 16,056 VND | 12,420 VND Special Price On Sale Till 31/03/2025 | 8,880 VND | 6,875 VND | 109,420 VND | 103,648 VND | 10,030 VND | 10,190 VND | 20,435 VND | 16,681 VND | ||
| Days to ShipSố ngày giao hàng | Same day or more | Same day or more | 6 Day(s) or more | 4 Day(s) | 4 Day(s) | Same day or more | Same day or more | Same day or more | 6 Day(s) | 4 Day(s) or more | 4 Day(s) or more | Same day | 4 Day(s) or more | Same day or more | Same day | 4 Day(s) or more | 4 Day(s) or more | Same day | Same day or more | 6 Day(s) or more | Same day or more | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | Same day | 4 Day(s) | 7 Day(s) or more | Same day | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật | |||||||||||||||||||||||||||||||||||||||||||||
| Nut Type | Pre-Assembly Insertion Nuts | Long Nuts | Pre-Assembly Insertion Nuts | T-Bolts | T Nut | Long Nuts | Post-Assembly Insertion Nuts | Pre-Assembly Insertion Nuts | T Nut | Pre-Assembly Insertion Stoppers | Pre-Assembly Insertion Nuts | Pre-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | Pre-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | Pre-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | Long Nuts | T-Bolts | T-Bolts | Pre-Assembly Insertion Nuts | Long Nuts | Pre-Assembly Insertion Nuts | T-Bolts | Pre-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | T-Bolts | Pre-Assembly Insertion Stoppers | Long Nuts | Pre-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | Pre-Assembly Insertion Nuts | Pre-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | Pre-Assembly Insertion Stoppers | Long Nuts | Long Nuts | Post-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | Flanged Nuts |
| Series | MISUMI 5 Series | MISUMI 5 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI, European Standard, Groove Width: 8 mm, Dedicated for Aluminum | MISUMI, European Standard, Groove Width: 6 mm, Dedicated for Aluminum / MISUMI, European Standard, Groove Width: 8 mm, Dedicated for Aluminum / MISUMI, European Standard, Groove Width: 10 mm, Dedicated for Aluminum | MISUMI 6 Series | MISUMI 5 Series | MISUMI 6 Series | - | NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series | NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series | MISUMI 3 Series | MISUMI 5 Series | MISUMI 5 Series | MISUMI 6 Series | NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series | LECOFRAME 40 Series (For Medium/Heavy Structures) | MISUMI 6 Series | MISUMI 6 Series | MISUMI 6 Series | MISUMI 5 Series | MISUMI 6 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI 8 Series | MISUMI 8-45 Series | MISUMI, European Standard, Groove Width: 8 mm, Dedicated for Aluminum / MISUMI, European Standard, Groove Width: 10 mm, Dedicated for Aluminum | NIC Autotec M6 Series / NIC Autotec M8 Series | NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI, European Standard, Groove Width: 10 mm, Dedicated for Aluminum | - | LECOFRAME 40 Series (For Medium/Heavy Structures) | MISUMI 5 Series | MISUMI 5 Series | MISUMI 6 Series | MISUMI 6 Series | MISUMI 6 Series | MISUMI 8 Series / MISUMI 8-45 Series | NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series | LECOFRAME 40 Series (For Medium/Heavy Structures) | LECOFRAME 25 Series (For Light/Medium Structures) | MISUMI 5 Series | MISUMI 6 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI 8 Series / MISUMI 8-45 Series |
| Nominal of Thread M(mm) | M3 / M4 / M5 | - | - | M6 / M8 | M4 / M5 / M6 / M8 | - | M3 / M4 / M5 | M3 / M4 / M5 / M6 | - | - | M3 / M4 / M5 / M6 / M8 | M3 | M5 | M3 / M4 / M5 | M6 | M3 / M4 / M5 / M6 / M8 | M4 / M5 / M6 / M8 | M6 | M3 / M4 / M5 / M6 | - | M5 | M6 | M3 / M4 / M8 | - | M4 / M5 / M6 / M8 | M6 / M8 | M6 / M8 | M3 / M4 / M5 / M6 / M8 | M4 / M5 / M6 / M8 | M8 | M6 / M8 | M4 / M5 / M6 | M5 | M3 / M4 / M5 | M4 / M5 / M6 | - | M3 / M4 / M5 / M6 | M3 / M4 / M8 | - | M6 | M4 / M5 | M3 / M4 | M3 / M4 / M5 / M6 | M8 | M8 |
| Material | Stainless Steel ～ Steel | Stainless Steel ～ Steel | Stainless Steel | - | Steel | Stainless Steel ～ Steel | Stainless Steel ～ Steel | Stainless Steel ～ Steel | Steel ～ Zinc Alloy | Plastic | Steel | Steel | Steel | Stainless Steel ～ Steel | Steel | Steel | Steel | Steel | Stainless Steel ～ Steel | Stainless Steel ～ Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel ～ Steel | Stainless Steel ～ Steel | Stainless Steel | Steel | Steel | Stainless Steel ～ Steel | Steel | Steel | Aluminum | Steel | Steel | Steel | Stainless Steel | Stainless Steel ～ Steel | Steel | Plastic | Steel | Steel | Stainless Steel ～ Steel | Steel | Steel | Stainless Steel |
| Function | With Stoppers | - | Eccentricity | - | Economy | - | Standard | With Ball Springs | - | Plastic Stoppers | Standard | Economy | With Locks | With Locks | With Locks | Nuts and Stoppers Set | Standard | With Locks | With Locks | - | Conductive | Conductive | Short, Rotating | - | With Stoppers | Economy | Standard | Standard | With Locks | Economy | Short, Rotating | Standard | With Locks | Short, Rotating | Short, Rotating | Eccentricity | Nuts and Stoppers Set | Short, Rotating | Plastic Stoppers | Standard | Standard | Short, Rotating | Short, Rotating | With Locks | - |
| Lock | Not Provided | Not Provided | Not Provided | - | - | Not Provided | Provided / Not Provided | Not Provided | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided / Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Provided / Not Provided | Not Provided | Not Provided | Not Provided |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Series
- MISUMI 3 Series
- MISUMI 5 Series
- MISUMI 6 Series
- MISUMI 8 Series
- MISUMI 8-45 Series
- LECOFRAME 25 Series (For Light/Medium Structures)
- LECOFRAME 40 Series (For Medium/Heavy Structures)
- NIC Autotec M4 Series
- NIC Autotec M6 Series
- NIC Autotec M8 Series
- NIC Autotec H10 Series
- NIC Autotec Conveyor Frame
- IMAO (item) Line 5
- IMAO (item) Line 6
- IMAO (item) Line 8
- MISUMI, European Standard, Groove Width: 6 mm, Dedicated for Aluminum
- MISUMI, European Standard, Groove Width: 8 mm, Dedicated for Aluminum
- MISUMI, European Standard, Groove Width: 10 mm, Dedicated for Aluminum
-
Nominal of Thread M(mm)
-
Material
-
Function
-
Lock
- Provided
- Not Provided
Related Categories to NutsDanh mục liên quan đến Nuts
-
- Aluminum Frames
- Special AEX
- AEX Units
- Brackets and Joint Parts
- Nuts
- Bolts
- Frame Caps
- Slot Covers
- Handles
- Hinges
- Catches and Locks
- Casters
- Foot Bases for Aluminum Extrusions
- Adjuster Pads
- Panel Mounts
- Curtains, Sheets
- Door Sliders
- Conveyor Parts
- Clamps, Holders, Hooks
- LED Lights
- Jigs, Maintenace Parts
- Concealed(invisible) joint parts/frame with joints
- Accessories for aluminum alloy profiles
- Transparent Plastic Covers
- Perforated Metals, Fences, Nets, Panels
-
FAQ Nuts (for Aluminum extrusions)
-
- Question: Can JIS standard hexagon nuts and square nuts be used for Aluminum extrusions?
- Answer: No.
A special nut that fits into the groove of the Aluminum extrusion shall be used to secure a large area of buckling pressure and prevents buckling of the Aluminum extrusion. - Question: Can nuts and brackets be used in common with any type of Aluminum extrusion?
- Answer: It can be used within the same series.
Since the groove shape is the same, accessories can be used in common. - Question: Is it possible to attach nuts and bolts made of stainless steel as the attachment for alteration code of black bracket as "with applicable bolts and nuts set"
(e.g.：HBLFSNB6-SST, HBLFSNB6-SSU, HBLFSNB6-SSP , etc.) - Answer: No, because there are no black stainless-steel bolts that correspond to the black bracket, so it cannot be attachment for alteration "with applicable bolts and nuts set".
- Question: Is there any product to prevent the fastening part from loosening?
- Answer: Yes.
• Screws with Captured Spring Washer Bulk Packages (500 pcs. per Package) (HCBST)
• Nut with Loosen Prevention Function (HNTTV□/HNTTZ□-series)
□ is Aluminum extrusion No. - Question: What is the difference between the 8-series and 8-45-series when selecting nuts for Aluminum extrusions?
- Answer: The Model No. used for the Pre-Assembly Insertion Stoppers and Stopper Integrated Nuts are different between the 8-series and 8-45-series. Other nuts can be used in common.
• 8-series：Pre-Assembly Insertion Stoppers HNST8, Stopper Integrated Nuts HNTE8, stainless steel material is model SHNTE8
• 8-45-series：HNST8-45, HNTE8-45, SHNTE8-45 - Question: What is the function of “reversal” in Tabbed Reversal Brackets?
- Answer: The Tabbed Reversal Brackets allows Aluminum extrusions to be connected together in L-connections and Cross-connections. Please see the example below.
Tabbed Reversal Brackets can be used even when the frames intersect. - Question: The allowable load of the bracket is the load under what conditions?
- Answer: It is the load per unit under the condition where two Aluminum extrusions are set up, then another Aluminum extrusion is placed between them with two brackets attached underneath.
The allowable load represents the load that bracket can maintain its position (without breaking/sliding) when all the mounting holes of the bracket are fixed with bolts and the load is applied.
- Question: What is the customizable length of the Aluminum extrusion that available for order?
- Answer: The length betwen 50 to 4000 mm can be ordered.
In addition, depending on the type, it is possible to order length 4001 mm to 6000 mm per Misumi FA catalog. So, please send us a request for quotation via Quotation request for item not listed in MISUMI FA Catalog service. - Question: What are the cutting tolerances of the Aluminum extrusions?
- Answer: ± 0.5 mm of the specified dimension.
- Question: Please explain about the perpendicularity of the cut surface of the Aluminum extrusion.
- Answer: Since the Aluminum extrusion is an extruded material, the datum cannot be specified. Therefore, the perpendicularity of the cut surface cannot be measured.
- Question: What is the product with "K" at the beginning of the Model No. of the Aluminum extrusion?
(Example：KHFS6-3030-4000) - Answer: A fixed-length frame. Available in 2 types: 4000 mm (effective length) and 1000 mm.
- Question: Fixed-length frames of Model No. starts with K are described as "effective length 4000 mm". What does effective length mean?
- Answer: It means that the actual usable length is 4000 mm or more.
Actual size should be 4000 mm or more (a few 10 mm longer).
A fixed-length frame is a frame that is cut and used by the customer, so the exact length cannot be specified. - Question: What is the difference between the Aluminum extrusion 8-series and the 8-45-series?
- Answer: Groove width is the same 1 mm, but the size of outer diameter and depth of groove are different.
Please select accessories that are compatible with each-series. - Question: What is tools for Aluminum extrusion cutting?
- Answer: The Aluminum extrusion can be cut by tip saw for soft steel materials. After assembling the frame, please attach Frame Caps at the cut surface.
- Question: What is the perpendicularity tolerance of the bracket?
- Answer: It depends on the type of bracket.
• Other than extruded brackets: There is no perpendicularity tolerance setting.
• Extruded bracket: Within ± 1 degree according to JIS standard H 4100 special class (excluding right angle machining type).
• Right angle (90 degree Brackets): Tolerance smaller than normal extruded bracket. Please refer to each product page for details. - Question: Is there a bracket for connecting between Aluminum extrusion and plate?
- Answer: Yes.
Please select a bracket with single side tap (HBLFSNK □, HBLFSNE □)
□ is Aluminum extrusion No. - Question: Please explain about the type of frame cap of high-rigidity Aluminum extrusion GFS, GNFS
- Answer: The following products are available:
Frame cap (made of resin)：
• 6-series (groove width 8 mm) frame cap for Aluminum extrusion (Frame End Caps - For 6 Series (Slot Width 8mm) Aluminum Frames)
• 8-series (groove width 10 mm) frame cap for Aluminum extrusion (Frame End Caps - For 8 Series (Slot Width 10mm) Aluminum Frames)
High-rigidity plate (made of metal)：
• HFCD□ (□ is Aluminum extrusion No.)
GFS and GNFS type have different cross-sectional shapes from other types, so they need to use with special frame caps. - Question: Is there a bracket that can be easily installed after assembly?
- Answer: Yes.
Please check on Panel Brackets - Plastic (HCBR).
It can be installed after assembling the Aluminum extrusion, and the panel can be attached. - Question: Are there any accessories for fixing the cable to the Aluminum extrusion?
- Answer: Yes.
Please check on Cable clamp (HFCN□PACK, HFCC□PACK) Please also be noted that cable band is not included.
□ is Aluminum extrusion No. - Question: Is there a roller that can be used with the Aluminum extrusion?
- Answer: Yes.
Rollers for Aluminum Frames (HFROLL, HFROLLM) or One-Sided Rollers for Aluminum Frames【10 Pieces Per Package】 (HFROLK) - Question: There is something like blue grease on the thread part of the round bar handle with plate. Is there any problem in use?
- Answer: No problem in use.
Since the grease is applied for rust prevention inside the thread part, it can be used normally. - Question: When creating a door using aluminum extrusion, how should the clearance between the door and Aluminum extrusion be?
- Answer: Clearance of .the Aluminum extrusion between the door and the outer frame depends on the series of Aluminum extrusions used and the width of the door.
Please refer to the clearance between the door and the outer frame below.
-
- Question: If I specify "with applicable bolts and nuts set"for alteration code of the bracket, can I change only the nuts to a different model number by "change M diameter"?
- Answer: No. In that case, please order separately.
- Question: Is it possible to add a tapped hole to the end face of a flat milled Aluminum extrusion?
- Answer: Yes.
Alteration code LTP (left end face) , RTP (right end face) , and TPW (both end faces) can be specified same as normal Aluminum extrusion. - Question: Is it possible to specify 2 or more types of alteration code on the Aluminum? extrusion?
- Answer: Yes.
Please add on the alteration code numbers side by side.
For example: "HFS6-3030-1000-LTP-RCH" - Question: Is it possible to drill holes with different diameters on one Aluminum extrusion?
- Answer: Not available as a standard product.
- Question: How many additional wrench holes can be specified for the Aluminum extrusion?
- Answer: Up to 5 horizontal, vertical, and cross holes, totally 15 locations.
- Question: Is it possible to peform alteration code (Number of holes, hole position, hole size, etc.) for Aluminum extrusions that are not listed in the "Alteration code" in the Aluminum extrusion page?
- Answer: There is a case where it is possible.
- Question: When using the screw joint HCJ6 with the 6-series Aluminum extrusion, which hole diameter should be used for the additional wrench hole of the Aluminum extrusion between φ5 and φ8?
- Answer: Wrench hole diameter must be φ8.
- Question: Is it possible to make additional 5 holes to the flat frame?
- Answer: Yes.
Up to 5 holes can be added to the flat frame. - Question: Is it possible to paint the Aluminum extrusion?
- Answer: No.
- Question: Please explain about the difference between LMH and LMV of M hole alteration of Aluminum extrusion.
- Answer: LMH is the instruction to make M hole horizontally on the left side of Aluminum extrusion, and LMV is the instruction to make M hole vertically.
(Additional string meaning L：Left, R：Right, H：Horizontal, V：Vertical)
Please refer to the frame placement standard and instructions below.
• Frame placement standard and instructions
When specifying a hole drilling, please specify "which side of the frame should the machining be done (left or right)" and "horizontal or vertical orientation." For MISUMI Aluminum extrusion, after setting in the prescribed way, the right/left/horizontal/vertical are determined as shown in the figure below.
- Question: Can the perpendicularity of the end face of the Aluminum extrusion be improved by specifying the alteration code "SC" (High precision cut) for the flat milled frame?
- Answer: It does not improve perpendicularity.
(The flat milled frame has a top and bottom parallelism of 0.1/100 and a height T of ± 0.05. SC only improves accuracy of length dimension) - Question: Is it possible to make an M6 hole on the side of the bracket?
- Answer: No. The alteration code "C" (alteration code of cover mounting holes) only supports drilling M5 holes.
- Question: Which part of the Aluminum extrusion will be machined if a tapped hole alteration is specified?
- Answer: The machining location is the part surrounded by red circles in the cross-sectional view of the Aluminum extrusion on the product page. There are two types, center hole and square hole, depending on the cross-sectional shape of the Aluminum extrusion.
- Question: Is it possible to insert a Thread Insert by adding tapped holes to the Aluminum extrusion?
- Answer: Yes.
Please refer to the Aluminum extrusion selection information site. If LHP, RHP, or HPW, is selected, alteration code with Thread Insert can be specified. - Question: Is it possible that Thread Insert is inserted even though Thread Insert insertion (LHR, PHP, HPW) is not specified in the tap hole alteration of the Aluminum extrusion?
- Answer: Yes.
In the case of the Aluminum extrusion 8-45-series, Thread Insert can be inserted even if LTP, RTP, or TPW is not specified, but only when the hole size of the tapped hole is φ12.5 - Question: The tolerance for the length of the Aluminum extrusion is ± 0.5 mm. Is it possible to request cutting with more accurate tolerance?
- Answer: Yes.
By specifying the alternation "SC" of the Aluminum extrusion, the tolerance for the total length L dimension can be changed from ± 0.5 to ± 0.2 mm and cut with high accuracy. However, only a length of 1500 mm or less can be performed.
-
- Question: Please show an example of application on how to attach a linear guide to an Aluminum extrusion.
- Answer: The following is an example of connecting a linear guide using a flat milled frame of an Aluminum extrusion and a long nut.
※The representative product in this example is 6-series, but it can be applied in the same way for Aluminum extrusion and long nut for 5-series and 8-series.
※When using an Aluminum extrusion, please be considering on bending and twisting the material within the range of JIS.
- Question: Please explain about how to mount the Aluminum extrusion vertically on the base plate.
- Answer: There are three methods.
• Set up nut for pre-assembly double joint the base plate and attach the Aluminum extrusion vertically it on the base plate with two bolts of the Aluminum extrusion fitted with lead-in double joint. (Fig.1)
• Make two through holes in the base plate and attach it to the Aluminum extrusion with nuts for lead-in double joint with bolts from under the base plate. (Fig.2)
• Attach with the anchor stand for Aluminum extrusion. (Fig.3)
- Question: Please show an example for application of angled Aluminum extrusion (HFS□□A5)
- Answer: The following is an example of application for angle-taped Aluminum extrusion HFS30A5-20.
-
- Question: Please explain about the types and features of Aluminum extrusion.
- Answer: Materials and features are different depending on type of Aluminum extrusion.
Please refer to the table below.
• Aluminum Extrusion Type and Characteristics
The color of aluminum extrusion may slightly vary depending on the materials. - Question: Please explain about how to select accessories for Aluminum extrusions.
- Answer: When the Aluminum extrusion is selected, available peripheral parts No. will be determined. Use the No. as a guide to select accessories.
• Selection of peripheral parts
When the Aluminum extrusion is selected, available peripheral parts No. will be determined. Use the No. as a guide to select accessories.
- Question: Please explain about how to secure the panel to the Aluminum extrusion.
- Answer: There are three methods of securing the panel to the Aluminum extrusion: bracket mounting, groove fitting, and direct mounting.
- Question: what's the difference between bolt and screw?
- Answer: The screw looks like a bolt, however, it has a shaped tip. The thread of the screw mate with the material. It is turned through to hold the screw in materials such as wood and plastic without using a nut
On the other hand, the bolt is not designed for self-tapping material, so that requires a nut to hold the bolt and object together - Question: Which is nut and which is bolt?
- Answer: The easy way to categorized between nut and bolt is
– Nuts have a screw hole,which has thread inside for example Hex nuts, Flanged nuts, Square nut and etc
– Bolts have an external male thread, which always use with nuts or screw hole for example Hex bolt, T-Bolt , Eye bolt etc. - Question: How many nut types are there?
- Answer: Nuts have varieties of types, sizes and materials for example,
Nut for aluminum profile can categorized by 2 types
1. Post-Assembly: Mountable from slots after assembly such as Free nut, Special T-nuts , Leaf spring T-nut, Ball spring T-nut, T- bolt and so on
2. Pre-Assembly: Insert from the slot ends before assembly such as T-nut, Long T-nut, T-nut with stopper , T-nut with set screw etc. - Question: Does a screw need a nut?
- Answer: When you use screws don't need to use nuts, because the screw has threads spiraling along the length, which can drill and stick to the material without using a nut. On the other hand, bolts need to use with nuts to hold two or more objects together.
- Question: How do you fasten nuts properly?
- Answer: 1. Before using a nut and a bolt need to check both of them have the same size of threads and pitch, for example, bolt size M8x1.5 and nut size M8x1.5 is OK
2. Use hands for tight a bolt and a nut mate together
3. Use a wrench or hex socket wrench to fasten it until tight
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy