Conveyer Rollers（Properties：Water Resistance）

• You can add up to 6 items per a category to the compare list. Compare

  

  Roller with Shaft (Stainless Steel)

  TRUSCO NAKAYAMA

  [Features]- This is a roller that can be installed as a roller replacement for conveyors of different manufacturers by adjusting the included collar.The 38 mm roller is for light loads and 60.5 mm for moderate loads, all-stainless steel rollers. Water and chemical resistant.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	38 ～ 60.5	Stainless Steel	Shaft	-	298 ～ 598	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	-

  From: 1,006,056 VND
  Days to Ship: Số ngày giao hàng: 16 Day(s)

  16 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Roller Curve Conveyor, Diameter ø42.7 × Width 305-690 (NTS Type)

  OKURA

  [Features]· Tapered roller conveyor for curves with a roller diameter of ø42.7.· Conveyor length and roller width within the range of 305 to 790 mm can be specified.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Tapered	Long Roller	42.7	Stainless Steel	No Shaft (Round Hole) / Shaft	Double	305 ～ 690	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Steel

  From: 3,267,245 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀50 × Width 90 - 620 (BBR Type)

  OKURA

  ⌀50 resin roller for light loads. Transport distance and roller width can be specified within the range of 90 - 620 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	50	Plastic	No Shaft (Round Hole) / Shaft	Double	90 ～ 620	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  From: 702,887 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless steel roller (conveyor roller) M Series (ARS-6015) diameter φ 60.5 x width100-1000

  MAKITECH

  Cost effective type φ60 stainless steel roller for moderate to light loads. Roller unit of the ARS-6015 roller conveyor. Widths can be specified in 1 mm increments from 100-1, 000 mm.[Features]• • Roller diameter is φ60.5. Minimum roller spacing is P75.• Standard roller width (nominal) is100W to 800W at intervals of 50mm.• Configurable size is available.• Press-in bearing and inexpensive type

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	60.5	Stainless Steel	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Stainless Steel

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Conveyor Roller (for Medium/Heavy　Load) SERIES FF3

  FUJI SEISAKUSHO

  Highly functional multi-purpose plastic conveyor rollers with improved dustproof and waterproof performance, as well as excellent impact resistance and sound deadening properties.[Features]·For medium and heavy loads. A double labyrinth seal is used for the seal part.·Press bearings (steel, stainless steel) and precision bearings (6002ZZ) are available.·In addition, the tube material can be selected from hard polyvinyl chloride (PVC) and steel (ST), which have excellent impact resistance, depending on the application.·The diameter can be selected from ⌀50, 51, 57, and 61 mm (diameters of 50, 51, 57, and 61 mm) according to the application.[Applications]·Ideal for small packages, bottles, cans, foods, newspapers, magazines, textiles, lightweight cartons, and other lightweight items.·Because it contains bearings, it can rotate more smoothly.·Because it uses a double labyrinth seal, it is durable even in dusty and watery environments.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	50 ～ 57	Plastic	No Shaft (Round Hole)	Double	100 ～ 700	-	Not Provided	Water Resistance	-	-	-	-	-	-	Steel

  From: 713,501 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀57 × Width 90 - 690 (SRS Type)

  OKURA

  Roller diameter of ⌀57 for use with moderate loads. Transport distance and roller width can be specified within the range of 90 - 690 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	57	Stainless Steel	No Shaft (Round Hole) / Shaft	Double	90 ～ 690	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Steel

  From: 1,321,811 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Roller, M Series (RS-1010), Diameter φ 10 × Width 50 - 200

  MAKITECH

  Ultra-fine φ10 stainless steel roller which employs a standard bearing. Roller unit parts for RS-1010, suitable for small item transport.[Features]· The roller diameter is φ10.0. The roller interval is P12.4.· Standard roller width (nominal) is 50W to 200W in increments of 50mm.· Standard bearing: high durability.· Aluminum extrusion

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	10	Stainless Steel	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Stainless Steel

  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Roller (Roller For Conveyor), M Series (RA-2816) Diameter φ28.6 × Width 100 - 500

  MAKITECH

  Small-diameter φ28 aluminum roller. Individual roller for RA-2816 roller conveyor, a lightweight conveyor; suitable for small item transport.[Features]· The roller diameter is φ28.6. The minimum roller interval is P40.· Standard roller width (nominal) is 100W to 500W in 50mm increments.· Machined bearings, high quality

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	28.6	Aluminum	-	Double	-	-	Clear Anodize	Water Resistance	-	-	Not Provided	-	-	-	Steel

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Plastic Roller (Conveyor Roller), Diameter ⌀50 (Stainless Steel Shaft) × Width 90 - 620 (BLS Type)

  OKURA

  ⌀50 resin roller for light loads. Stainless steel shaft type. Transport distance and roller width can be specified within the range of 90 - 620 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	50	Plastic	No Shaft (Round Hole) / Shaft	Double	90 ～ 620	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  From: 702,887 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Roller (Roller For Conveyor), M Series (RA-3816), Diameter φ38.1 × Width 100 - 600

  MAKITECH

  General purpose φ38 aluminum roller. Individual roller for the lightweight RA-3816 roller conveyor. The widths can be specified in 50 mm increments from 100 to 600 mm.[Features]· The roller diameter is φ38.1. The minimum roller interval is P50.· This model is most frequently used with the aluminum rollers.· Standard roller width (nominal) is 100W to 600W in 50mm increments.· Pressed-in bearing, inexpensive type

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	38.1	Aluminum	-	Double	-	-	Clear Anodize	Water Resistance	-	-	Not Provided	-	-	-	Steel

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Roller, S Series (SS-4212), Diameter φ 42.7 × Width 90 - 790

  MAKITECH

  [Features]- φ42 stainless steel roller.Individual roller for SS-4212 moderate load roller conveyor.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	42.7	Stainless Steel	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Stainless Steel

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic Roller (Conveyor Roller), M Series (JR-3018B), Diameter φ 30.6 × Width 100 - 500

  MAKITECH

  φ 30 resin roller. Suited for transport of small, lightweight items. The roller component from the lightweight JR-3018B roller conveyor. The widths can be specified in 1 mm increments from 100 to 500 mm.[Features]· The roller diameter is 30.5 mm. The minimum roller interval is P40.· The standard roller width (nominal) is 100 to 500 mm at intervals of 50 mm.· Configurable size is available.· Aluminum extrusion.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	30.5	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Resin Roller (Roller for Conveyor), M Series (JR-5028), Diameter φ 50.3 × Width 100 - 600

  MAKITECH

  φ50 resin roller. Suited for transport of lightweight, small items. The roller component from the lightweight JR-5028 roller conveyor. The widths can be specified in 1 mm increments from 100 to 600 mm.[Features]· The roller diameter is φ50.3. The minimum roller interval is P75.· Standard roller width (nominal) is 100W to 600W in 50mm increments.· Can be manufactured to desired size.· Aluminum extrusion

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	50.3	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀18.1 × Width 100 - 500 (EAR Type)

  OKURA

  Optimal for small item transport. Transport distance and roller width can be specified within the range of 100 - 500 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	18.1	Aluminum	No Shaft (Round Hole) / Shaft	Double	100 ～ 500	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Steel

  From: 303,201 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀42 × Width 240 - 490 (AR Type)

  OKURA

  Light and clean. Transport distance and roller width can be specified within the range of 240 - 490 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	42	Aluminum	No Shaft (Round Hole) / Shaft	Double	240 ～ 490	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Steel

  From: 396,686 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Roller Unit (Roller For Conveyor), Resin Bearing Type, Diameter ø42 × Width 240-490 (ZAR Type)

  OKURA

  [Features]· Low noise type with resin bearings.· Conveyor length and roller width within the range of 240 to 490 mm can be specified.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	42	Aluminum	No Shaft (Round Hole) / Shaft	Double	240 ～ 490	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  From: 396,686 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Aluminum Roller (Roller for Conveyor) Resin Bearing Type (Stainless Steel Shaft), Diameter ⌀42 × Width 240 - 490 (ZARS Type)

  OKURA

  Water resistant, low noise type with resin bearings. Stainless steel shaft. Transport distance and roller width can be specified within the range of 240 - 490 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	42	Aluminum	No Shaft (Round Hole) / Shaft	Double	240 ～ 490	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  From: 583,656 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀18 × Width 90 - 390 (ES Type)

  OKURA

  Stainless steel roller with minimum roller diameter of ⌀18. Optimal for transport of ultra-small materials. Transport distance and roller width can be specified within the range of 90 - 390 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	18	Stainless Steel	No Shaft (Round Hole) / Shaft	Double	90 ～ 390	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Steel

  From: 565,659 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Stainless Steel Roller (Roller for Conveyor) Diameter ø25.4 × Width 90 - 490 (KS Type)

  OKURA

  Best suited for transport of lightweight, small items. Transport distance and roller width can be specified within the range of 90 - 490 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	25.4	Stainless Steel	No Shaft (Round Hole) / Shaft	Double	90 ～ 490	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Steel

  From: 565,659 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Stainless Steel Roller (Roller for Conveyor) Diameter ø38.1 × Width 90 - 690 (QS Type)

  OKURA

  Stronger version of KS. Transport distance and roller width can be specified within the range of 90-690 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	38.1	Stainless Steel	No Shaft (Round Hole) / Shaft	Double	90 ～ 690	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Steel

  From: 716,885 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 690 (PS Type)

  OKURA

  Roller diameter of ⌀42.7 for use with moderate loads. Transport distance and roller width can be specified within the range of 90 - 690 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	42.7	Stainless Steel	No Shaft (Round Hole) / Shaft	Double	90 ～ 690	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Steel

  From: 887,541 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀48.6 × Width 90 - 690 (LS Type)

  OKURA

  Roller with a diameter of ⌀48.6 for use with moderate loads. Transport distance and roller width can be specified within the range of 90 - 690 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	48.6	Stainless Steel	No Shaft (Round Hole) / Shaft	Double	90 ～ 690	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Steel

  From: 1,102,685 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Resin Roller (Roller for Conveyor) Diameter ⌀18 × Width 90 - 390 (BES Type)

  OKURA

  ⌀18 antibacterial resin roller for light loads. Transport distance and roller width can be specified within the range of 90-390 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	18	Plastic	No Shaft (Round Hole) / Shaft	Double	90 ～ 390	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  From: 424,432 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀30 × Width 90 - 390 (KBR Type)

  OKURA

  ⌀30 resin roller for light loads. Transport distance and roller width can be specified within the range of 90 - 390 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	30	Plastic	No Shaft (Round Hole) / Shaft	Double	90 ～ 390	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  From: 509,668 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Resin Roller Conveyor, Diameter ø30 (Stainless Steel Shaft) × Width 90-390 (BFS Type)

  OKURA

  [Features]· Light load conveyor incorporating ø30 resin roller in stainless steel frame. Conveyor length and roller width within the range of 90 to 390 mm can be specified.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	30	Plastic	No Shaft (Round Hole) / Shaft	Double	90 ～ 390	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  From: 509,668 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Plastic Roller (Roller for Conveyor) Diameter ⌀40 × Width 240 - 390 (BRA Type)

  OKURA

  ⌀40 resin roller for light loads. Transport distance and roller width can be specified within the range of 240 - 390 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	40	Plastic	No Shaft (Round Hole) / Shaft	Double	240 ～ 490	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  From: 689,139 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Individual Plastic Roller (Conveyor Roller), Diameter ⌀40 (Stainless Steel Shaft) × Width 90 - 490 (BPS Type)

  OKURA

  [Features]• ⌀40 resin rollers for loads.• Stainless steel shaft type.• Transport distance and roller width can be specified within the range of 90 - 490 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	40	Plastic	No Shaft (Round Hole) / Shaft	Double	90 ～ 490	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  From: 599,404 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Roller, M Series (RS-1912), Diameter φ 19 × Width 100 - 500

  MAKITECH

  A small-diameter ⌀ 19-mm stainless steel roller. Suitable for transporting small objects. A single roller unit for the RS-1912 roller conveyor. The widths of the roller can be specified in 1-mm increments from 100–500 mm.[Features]· The roller diameter is ⌀ 19.0 mm. The minimum roller interval is P25.· The standard roller width (nominal) is 100–500 mm in increments of 50 mm.· This roller can also be manufactured in non-standard sizes.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	19	Stainless Steel	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Stainless Steel

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Roller, S Series (SS-3810), Diameter φ 38.1 × Width 90 - 690

  MAKITECH

  General purpose Ø38 stainless steel roller. · Individual SS-3810 roller.[Features]· The roller diameter is φ38.1. The minimum roller interval is P50.· The roller width (nominal) corresponds to 90W to 690W standard dimensions by default.· Configurable sizes (intermediate sizes) are not available.· Pressed bearing.· Model 60 frame

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	38.1	Stainless Steel	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Stainless Steel

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic Roller, S Series (SJR-4023S), Diameter φ40 × Width 240 - 490

  MAKITECH

  [Features]- φ42 resin roller.- Individual roller for lightweight SJR-4023S roller conveyor with aluminum frame.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	40	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Roller, M Series (HG-RS1210), Diameter φ 12 × Width 100 - 400

  MAKITECH

  Superfine φ12 stainless steel roller. All stainless steel individual roller for HG-RS1210 roller conveyor, which is optimal for transport of small items.[Features]· The roller diameter is φ12.0. The minimum roller interval is P15.· Standard roller width (nominal) is 100W to 400W in 50mm increments.· Can be manufactured to desired size.· L Type Frame

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	12	Stainless Steel	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Stainless Steel

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Roller, M Series (RS-5715), Diameter φ 57 × Width 100 - 899

  MAKITECH

  φ 57 Stainless steel roller. Individual roller for RS-5715 moderate load roller conveyor.[Features]· The roller diameter is 57.0 mm. The minimum roller interval is P75.· The standard of the roller width (nominal) is 100 to 800 mm at intervals of 50 mm.· Configurable size is available.· Standard bearing: high quality.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	57	Stainless Steel	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Stainless Steel

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Resin Roller, M Series (JR-3823), Diameter φ38 × Width 100 - 500

  MAKITECH

  A general purpose ⌀ 38-mm resin roller. Suitable for transporting light loads. A single roller unit for the JR-3823 roller conveyor. The widths of the roller can be specified in 1-mm increments from 100–500 mm.[Features]· The roller diameter is ⌀ 38 mm. The minimum roller interval is P50.· The standard roller width (nominal) is 100–500 mm in increments of 50 mm.· This roller can also be manufactured in non-standard sizes. Utilizes an aluminum frame.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	38	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless steel roller (conveyor roller) M Series (RS-6015) diameter φ 60.5 x width100-1000

  MAKITECH

  A resin flanged φ 60 stainless steel roller for moderate to light loads. Replaceable bearings. Roller unit of the RS-6015 roller conveyor. The widths can be specified in 1 mm increments from 100 to 1, 000 mm.[Features]· The roller diameter is 60.5 mm. The minimum roller interval is P75.· The standard of the roller width (nominal) is 100 to 800 mm at intervals of 50 mm.· Configurable size is available.· Standard bearing: high quality.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	60.5	Stainless Steel	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Stainless Steel

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Roller (Roller For Conveyor), M Series (RA-5716) Diameter φ57.1 × Width 100 - 800

  MAKITECH

  φ57 aluminum roller for light loads. Roller strength is higher than the RA-4515. Roller unit of the RA-5716 roller conveyor.[Features]• Roller diameter is φ57.1. Minimum roller spacing is P75.• Standard roller width (nominal) is 100W to 800W at intervals of 50mm.• Pressed-in bearing and inexpensive type

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	57.1	Aluminum	-	Double	-	-	Clear Anodize	Water Resistance	-	-	Not Provided	-	-	-	Steel

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Roller (Roller For Conveyor) M Series (RA-4515) Diameter φ45.0 × Width 100-600

  MAKITECH

  φ45 aluminum roller. Suited for transport of light loads. The conveyor itself is also lightweight. Roller unit of the RA-4515 roller conveyor.[Features]· The roller diameter is φ45.0. The minimum roller interval is P50.· Standard roller width (nominal) is 100W to 600W in 50mm increments.· Pressed-in bearing and inexpensive type

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	45	Aluminum	-	Double	-	-	Clear Anodize	Water Resistance	-	-	Not Provided	-	-	-	Steel

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Roller (Roller For Conveyor) M Series (RAF-4515) Diameter φ45.0 × Width 243-393

  MAKITECH

  Cost effective type φ45 aluminum roller suitable for transport of light loads. The conveyor itself is also lightweight. Roller unit of the RAF-4515 roller conveyor.[Features]• Roller diameter is φ45.0. Minimum roller spacing is P75.- Two roller widths available: 300W and 450W.• Pressed-in bearing and inexpensive type

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	45	Aluminum	-	Double	-	-	Clear Anodize	Water Resistance	-	-	Not Provided	-	-	-	Steel

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic Roller (Conveyor Roller), M Series (JR-2015B), Diameter φ 20.0 × Width 100 - 400

  MAKITECH

  Highly popular φ20 resin roller. Suited for transport of lightweight, small items. The roller component is the lightweight JR-2015B roller conveyor. The widths can be specified in 1 mm increments from 100 to 400 mm.[Features]· The roller diameter is φ20.2. The minimum roller interval is P25.· The standard of the roller width (nominal) is 100W to 400W at intervals of 50mm. Free size is available.· Uses an aluminum frame. [30 Low-Floor Type Frame]

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	20.2	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Resin Roller (Roller for Conveyor), M Series (JR-4023), Diameter φ 40.0 × Width 100 - 600

  MAKITECH

  A ⌀ 40-mm resin roller. Suitable for transporting lightweight small items. A single roller unit for the lightweight JR-4023 roller conveyor. The width of the roller can be specified in 1-mm increments from 100–600 mm.[Features]· The diameter of the roller is ⌀ 40.0 mm. The minimum roller interval is P50.· The standard roller width (nominal) is 100–600 mm in increments of 50 mm.· This roller can also be manufactured in non-standard sizes.· Utilizes an aluminum frame.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	40	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Resin Roller (Roller for Conveyor), M Series (JR-5730), Diameter φ 57.0 × Width 100 - 600

  MAKITECH

  φ57 resin roller. Suited for transport of lightweight, small items. The roller component from the lightweight JR-5730 roller conveyor. The widths can be specified in 1 mm increments from 100 to 600 mm.[Features]· The roller diameter is φ57.0. The minimum roller interval is P75.· Standard roller width (nominal) is 100W to 600W in 50mm increments.· Can be manufactured to desired size.· Aluminum extrusion

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	57	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Roller (Roller For Conveyor), M Series (R900), Diameter φ45.0 × Width 200 - 600

  MAKITECH

  A light to medium load type with an inside frame radius of 900 mm. Roller unit of the RA-TC900 roller conveyor. Widths can be specified in 1 mm increments from 200 to 600 mm.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	45	Aluminum	-	Double	-	-	Clear Anodize	Water Resistance	-	-	Not Provided	-	-	-	Steel

  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Tapered Roller (Roller for Conveyor), M Series (R900), Diameter φ 44.7 x Width 200 - 600

  MAKITECH

  A light to medium load type with the inside frame radius of 900 mm. Roller unit of the RS-TC900 roller conveyor. The widths can be specified in 1 mm increments from 200 to 600 mm.[Features]· 90 degree angle for 900 mm internal diameters.· Standard roller width (nominal) is 200W to 600W in 50mm increments.· Can be manufactured to desired size.· Pressed-in bearing.· Stainless steel frame

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	44.7	Stainless Steel	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Stainless Steel

  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Roller (Roller For Conveyor), S Series (SA-1810), Diameter φ18.1 × Width 100 - 500

  MAKITECH

  φ 18 aluminum roller. Suitable for transporting small parts. Roller unit of the SA-1810 roller conveyor.[Features]· The roller diameter is 18.0 mm. The minimum roller interval is P20.· The standard of the roller width (nominal) is 100 to 500 mm at intervals of 50 mm.· Configurable size is available.· Press bearing.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	18.1	Aluminum	-	Double	-	-	Clear Anodize	Water Resistance	-	-	Not Provided	-	-	-	Steel

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Roller (Roller For Conveyor) S Series (SA-4218) Diameter φ42.5 × Width 240-490

  MAKITECH

  φ 42 aluminum roller. Suited for transport of light loads. The conveyor itself is also lightweight. Roller unit of the SA-4218 roller conveyor.[Features]· The roller diameter is 42.5 mm. The minimum roller interval is P50.· The standard roller width (nominal) is 90 to 490 mm.· Configurable size (intermediate size) is available.· Pressed-in bearing.· Model 63 frames.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	42.5	Aluminum	-	Double	-	-	Clear Anodize	Water Resistance	-	-	Not Provided	-	-	-	Steel

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Roller (Roller For Conveyor) S Series (SA-4218M) Diameter φ42.5 × Width 240-490

  MAKITECH

  A bearing element, resin bushing type ⌀ 42-mm aluminum roller. Suitable for lightweight conveying. The conveyor itself is also lightweight. A single roller unit for the SA-4218M roller conveyor.[Features]· The roller diameter is ⌀ 42.5 mm. The minimum roller interval is P50.· The standard roller width (nominal) is 90–490 mm.· This roller can also be manufactured in non-standard sizes.· Resin bushing.· Model 63 frame.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material
  Straight	Long Roller	42.5	Aluminum	-	Double	-	-	Clear Anodize	Water Resistance	-	-	Not Provided	-	-	-	Plastic

  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Long Roller Type
Type
Outer Dia. D(Ø)
Roller Material
Shaft Type
Bearing
Width W(mm)
Drive
Surface Treatment
Properties
Power Supply
Short Roller Type
Lining
Lining Material
Lining Hardness(Shore A)
Lining Color
Bearing Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	TRUSCO NAKAYAMA	OKURA	OKURA	MAKITECH	FUJI SEISAKUSHO	OKURA	MAKITECH	MAKITECH	OKURA	MAKITECH	MAKITECH	MAKITECH	MAKITECH	OKURA	OKURA	OKURA	OKURA	OKURA	OKURA	OKURA	OKURA	OKURA	OKURA	OKURA	OKURA	OKURA	OKURA	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH
Product SeriesDòng sản phẩm	Roller with Shaft (Stainless Steel)	Stainless Steel Roller Curve Conveyor, Diameter ø42.7 × Width 305-690 (NTS Type)	Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀50 × Width 90 - 620 (BBR Type)	Stainless steel roller (conveyor roller) M Series (ARS-6015) diameter φ 60.5 x width100-1000	Conveyor Roller (for Medium/Heavy　Load) SERIES FF3	Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀57 × Width 90 - 690 (SRS Type)	Stainless Steel Roller, M Series (RS-1010), Diameter φ 10 × Width 50 - 200	Aluminum Roller (Roller For Conveyor), M Series (RA-2816) Diameter φ28.6 × Width 100 - 500	Single Unit Plastic Roller (Conveyor Roller), Diameter ⌀50 (Stainless Steel Shaft) × Width 90 - 620 (BLS Type)	Aluminum Roller (Roller For Conveyor), M Series (RA-3816), Diameter φ38.1 × Width 100 - 600	Stainless Steel Roller, S Series (SS-4212), Diameter φ 42.7 × Width 90 - 790	Plastic Roller (Conveyor Roller), M Series (JR-3018B), Diameter φ 30.6 × Width 100 - 500	Resin Roller (Roller for Conveyor), M Series (JR-5028), Diameter φ 50.3 × Width 100 - 600	Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀18.1 × Width 100 - 500 (EAR Type)	Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀42 × Width 240 - 490 (AR Type)	Aluminum Roller Unit (Roller For Conveyor), Resin Bearing Type, Diameter ø42 × Width 240-490 (ZAR Type)	Single Unit Aluminum Roller (Roller for Conveyor) Resin Bearing Type (Stainless Steel Shaft), Diameter ⌀42 × Width 240 - 490 (ZARS Type)	Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀18 × Width 90 - 390 (ES Type)	Single Unit Stainless Steel Roller (Roller for Conveyor) Diameter ø25.4 × Width 90 - 490 (KS Type)	Single Unit Stainless Steel Roller (Roller for Conveyor) Diameter ø38.1 × Width 90 - 690 (QS Type)	Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 690 (PS Type)	Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀48.6 × Width 90 - 690 (LS Type)	Single Unit Resin Roller (Roller for Conveyor) Diameter ⌀18 × Width 90 - 390 (BES Type)	Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀30 × Width 90 - 390 (KBR Type)	Resin Roller Conveyor, Diameter ø30 (Stainless Steel Shaft) × Width 90-390 (BFS Type)	Single Unit Plastic Roller (Roller for Conveyor) Diameter ⌀40 × Width 240 - 390 (BRA Type)	Individual Plastic Roller (Conveyor Roller), Diameter ⌀40 (Stainless Steel Shaft) × Width 90 - 490 (BPS Type)	Stainless Steel Roller, M Series (RS-1912), Diameter φ 19 × Width 100 - 500	Stainless Steel Roller, S Series (SS-3810), Diameter φ 38.1 × Width 90 - 690	Plastic Roller, S Series (SJR-4023S), Diameter φ40 × Width 240 - 490	Stainless Steel Roller, M Series (HG-RS1210), Diameter φ 12 × Width 100 - 400	Stainless Steel Roller, M Series (RS-5715), Diameter φ 57 × Width 100 - 899	Resin Roller, M Series (JR-3823), Diameter φ38 × Width 100 - 500	Stainless steel roller (conveyor roller) M Series (RS-6015) diameter φ 60.5 x width100-1000	Aluminum Roller (Roller For Conveyor), M Series (RA-5716) Diameter φ57.1 × Width 100 - 800	Aluminum Roller (Roller For Conveyor) M Series (RA-4515) Diameter φ45.0 × Width 100-600	Aluminum Roller (Roller For Conveyor) M Series (RAF-4515) Diameter φ45.0 × Width 243-393	Plastic Roller (Conveyor Roller), M Series (JR-2015B), Diameter φ 20.0 × Width 100 - 400	Resin Roller (Roller for Conveyor), M Series (JR-4023), Diameter φ 40.0 × Width 100 - 600	Resin Roller (Roller for Conveyor), M Series (JR-5730), Diameter φ 57.0 × Width 100 - 600	Aluminum Roller (Roller For Conveyor), M Series (R900), Diameter φ45.0 × Width 200 - 600	Stainless Steel Tapered Roller (Roller for Conveyor), M Series (R900), Diameter φ 44.7 x Width 200 - 600	Aluminum Roller (Roller For Conveyor), S Series (SA-1810), Diameter φ18.1 × Width 100 - 500	Aluminum Roller (Roller For Conveyor) S Series (SA-4218) Diameter φ42.5 × Width 240-490	Aluminum Roller (Roller For Conveyor) S Series (SA-4218M) Diameter φ42.5 × Width 240-490
CADCAD				2D			2D			2D	2D	2D	2D															2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D
From	1,006,056 VND	3,267,245 VND	702,887 VND		713,501 VND	1,321,811 VND			702,887 VND					303,201 VND	396,686 VND	396,686 VND	583,656 VND	565,659 VND	565,659 VND	716,885 VND	887,541 VND	1,102,685 VND	424,432 VND	509,668 VND	509,668 VND	689,139 VND	599,404 VND
Days to ShipSố ngày giao hàng	16 Day(s)	7 Day(s) or more	7 Day(s) or more	10 Day(s) or more	12 Day(s) or more	5 Day(s) or more	14 Day(s) or more	10 Day(s) or more	5 Day(s) or more	10 Day(s) or more	10 Day(s) or more	11 Day(s) or more	11 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	Same day or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	10 Day(s) or more	10 Day(s) or more	11 Day(s) or more	10 Day(s) or more	10 Day(s) or more	11 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	11 Day(s) or more	10 Day(s) or more	12 Day(s) or more	12 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more
Long Roller Type	Straight	Tapered	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight
Type	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller
Outer Dia. D(Ø)	38 ～ 60.5	42.7	50	60.5	50 ～ 57	57	10	28.6	50	38.1	42.7	30.5	50.3	18.1	42	42	42	18	25.4	38.1	42.7	48.6	18	30	30	40	40	19	38.1	40	12	57	38	60.5	57.1	45	45	20.2	40	57	45	44.7	18.1	42.5	42.5
Roller Material	Stainless Steel	Stainless Steel	Plastic	Stainless Steel	Plastic	Stainless Steel	Stainless Steel	Aluminum	Plastic	Aluminum	Stainless Steel	Plastic	Plastic	Aluminum	Aluminum	Aluminum	Aluminum	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Plastic	Plastic	Plastic	Plastic	Plastic	Stainless Steel	Stainless Steel	Plastic	Stainless Steel	Stainless Steel	Plastic	Stainless Steel	Aluminum	Aluminum	Aluminum	Plastic	Plastic	Plastic	Aluminum	Stainless Steel	Aluminum	Aluminum	Aluminum
Shaft Type	Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	-	No Shaft (Round Hole)	No Shaft (Round Hole) / Shaft	-	-	No Shaft (Round Hole) / Shaft	-	-	-	-	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Bearing	-	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double
Width W(mm)	298 ～ 598	305 ～ 690	90 ～ 620	-	100 ～ 700	90 ～ 690	-	-	90 ～ 620	-	-	-	-	100 ～ 500	240 ～ 490	240 ～ 490	240 ～ 490	90 ～ 390	90 ～ 490	90 ～ 690	90 ～ 690	90 ～ 690	90 ～ 390	90 ～ 390	90 ～ 390	240 ～ 490	90 ～ 490	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Drive	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Surface Treatment	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Clear Anodize	Not Provided	Clear Anodize	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Clear Anodize	Clear Anodize	Clear Anodize	Not Provided	Not Provided	Not Provided	Clear Anodize	Not Provided	Clear Anodize	Clear Anodize	Clear Anodize
Properties	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance
Power Supply	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Short Roller Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Lining	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Lining Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Lining Hardness(Shore A)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Lining Color	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Bearing Material	-	Steel	Plastic	Stainless Steel	Steel	Steel	Stainless Steel	Steel	Plastic	Steel	Stainless Steel	Plastic	Plastic	Steel	Steel	Plastic	Plastic	Steel	Steel	Steel	Steel	Steel	Plastic	Plastic	Plastic	Plastic	Plastic	Stainless Steel	Stainless Steel	Plastic	Stainless Steel	Stainless Steel	Plastic	Stainless Steel	Steel	Steel	Steel	Plastic	Plastic	Plastic	Steel	Stainless Steel	Steel	Steel	Plastic

Loading...Tải…