(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
Timing Belt（Belt Tooth Surface：Standard (Single Sided) Page2）
The timing belt is a device that transmits power within an engine. It works with pulleys that drive the crankshaft gear and the timing belt to determine the operation of the suction, compression, detonation and exhaust strokes in the engine to circulate continuously. The belt will look like a cog with a trapezoidal cr
The timing belt is a device that transmits power within an engine. It works with pulleys that drive the crankshaft gear and the timing belt to determine the operation of the suction, compression, detonation and exhaust strokes in the engine to circulate continuously. The belt will look like a cog with a trapezoidal cross section along the entire length of the belt. The teeth are made of a prosthetic material with the other side having a steel wire or fiber reinforced core and covered with nylon fibers to reduce wear. To keep the engine's internal power from slipping and causing noise, timing belts are used with pulleys with the same tooth size. A timing belt is a device used in conjunction with a timing pulley. The main feature of this type of belt is the inner edge of the many tooth grooves that are significant parts of the engine's power transmission system. This component is responsible for ensuring that the suction stroke, the compression stroke, the detonating stroke, and the ejection stroke of the engine are always balanced. Timing belts come in many specifications to choose from. Therefore, it is necessary to choose the right type of work for the safety of the engine powertrain and its full efficiency. Various specifications and information about timing belts can be viewed in the online store in MISUMI's E-Catalog. Searching for products, ordering and checking delivery dates is easy with just one click.
Dây đai đồng bộ (đai định thời) là một bộ phận giúp truyền lực bên trong động cơ. Nó kết hợp với các puli (ròng rọc) dẫn động bánh răng trục để tạo ra các kì hút, nén, nổ và xả trong động cơ và giúp nó tuần hoàn liên tục. Dây đai đồng bộ bề ngoài sẽ giống như một bánh răng với mặt cắt hình thang dọc theo toàn bộ chiều dài. Các răng được làm bằng vật liệu thay thế (khác với vật liệu bánh răng) và mặt còn lại được gia cố bằng các lõi thép hoặc sợi đặc biệt và được phủ bằng sợi nylon để giảm mài mòn. Để tránh tổn thất do trượt trong việc truyền tải của động cơ và gây ra tiếng ồn không mong muốn, dây đai đồng bộ được sử dụng với các puli có cùng kích thước răng. Chúng là các thiết bị luôn được sử dụng kết hợp với nhau. Đặc điểm chính của loại dây đai này là mép trong của các rãnh răng, chúng đóng vai trò quan trọng trong hệ truyền lực của động cơ. Bộ phận này có nhiệm vụ đảm bảo các kì hút, nén, nổ và đẩy của động cơ luôn cân bằng. Dây đai đồng bộ có đa dạng thông số kỹ thuật, do đó cần chọn loại phù hợp với yêu cầu công việc để đảm bảo an toàn cho hệ thống truyền động và hiệu suất của nó. Có thể xem nhiều thông số kỹ thuật và thông tin khác nhau về dây đai tại cửa hàng trực tuyến trong danh mục sản phẩm trực tuyến (E-Catalog) của MISUMI. Tìm kiếm sản phẩm, đặt hàng và kiểm tra ngày giao hàng dễ dàng chỉ bằng một cú nhấp chuột.
Một số loại dây đai răng phổ biến: dây đai răng 5M, dây đai răng 3M, dây đai răng 8M, dây đai răng S2M, dây đai răng S3M, dây đai răng S5M, dây đai răng S8M, dây đai răng S14M, dây curoa răng 3M, dây curoa răng 5M, đai răng GT2, dây cu roa răng, dây cu roa, dây đai răng, đai răng.
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
108 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Timing Belts/L/Compatible with the Timing Pulleys L
MISUMI
General purpose timing pulleys suitable for torque transmission and light load conveyance.[Material]-TBN Belt: Chloroprene rubber, Core wire: Fiberglass cord S/Z alternately twisted continuous, Cloth: Nylon cloth-TUN Belt: Polyurethane, Core wire: Steel cord[Belt shape] Endless[Operating temperature]· Rubber: -30 °C to 90 °C· Polyurethane: 0 °C to 80 °C[Related Products]· Timing pulley Timing Pulley L Type· Idler Idler with Teeth Center Bearing, Idler with Teeth Both Sides Bearing, Idler - Backside Tensioning Center Bearing, Idler - Backside Tensioning Both Sides Bearing
- Volume Discount
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type L Closed End 12.7 ～ 38.1 Rubber Belt / Polyurethane Belt Standard (Single Sided) Glass Fiber / Steel Cord 0.5 ～ 1.5 Trapezoidal Tooth Profile Circular Type From: 243,478 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
MITSUBOSHI BELTING
Mitsuboshi Belting standard MXL tooth profile timing belt.Synchronized transmission belt which solved problems of belt and gears. Small pitch belts are especially suitable for precision equipment and information equipment.[Material]· RubberBelt: Chloroprene, core wire: Glass fiber, aramid fiber[Belt Shape]Endless[Operating Temperature]-30°C to 80°C[Belt Type (Width Dimension)]3.2 mm, 4.8 mm, 6.4 mm, 9.5 mm, 12.7 mm[Features]·A product with a wide variety of tooth profiles and size variations, with excellent versatility and availability.·High transmission is obtained, so it can be widely used.·Long lifespan and low noise. Realized cost reduction.[Application]·Ideal for woodworking machines, machine tools, paper machines, printing machines, fans, blowers.
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type MXL Closed End 3.2 ～ 12.7 Rubber Belt Standard (Single Sided) Glass Fiber - Trapezoidal Tooth Profile Circular Type From: 74,566 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Timing Belts/Super High Torque/EV5GT
MISUMI
Since it has an arc tooth profile, it has little backlash and is suitable for high-precision positioning applications.[Material] Belt: High modulus rubber, Core wire: Glass fiber cord, Cloth: Nylon cloth[Belt shape] Endless[operating temperature] -10 °C to 80 °C
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type EV5GT Closed End 9 ～ 15 Rubber Belt Standard (Single Sided) Glass Fiber - Circular Tooth Profile EV Belt From: 281,088 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
BANDO CHEMICAL
Engages properly and can transmit force. Lubrication not required, and replacing almost totally unnecessary.[Features]· Belt and pulley mesh properly, and number of rotations and movement amounts can be obtained just as calculated.· No metal-to-metal contact, so no lubrication equipment is not required.· High initial tension not required, so bearings and motors can be made small.· In addition to the standard specification, the next special specification synchro belt is being created.· Synchro belt for high loads (for high-load transmission…XH, XXH type).· An oil-resistant synchro belt (for use in places exposed to large amounts of oil).· A heat-resistant synchro belt (for use in places 90°C to 120°C).
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type H Closed End - Rubber Belt Standard (Single Sided) Glass Fiber 0.75 ～ 3 Trapezoidal Tooth Profile Circular Type From: 613,393 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Iron Rubber Belt, Belt Width AT10
NOK
High-torque and high-tension type belt with urethane teeth
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type AT10 Closed End / Open End 25 Polyurethane Belt Standard (Single Sided) Stainless Steel / Steel Cord - Trapezoidal Tooth Profile AT Type Days to Ship: Số ngày giao hàng: 17 Day(s) or more
17 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Super torque synchronous belt type STS S3M
BANDO CHEMICAL
Super Torque Synchronous Belt Type STS S3M It is a round tooth profile timing belt. This belt always uses for high torque transmission on an automation machine [Features] • Belt Shape: Closed End • Belt Tooth Type: S3M (round tooth profile) • Tooth Pitch: 3 mm. • Belt Width: 6, 10, and 15 mm. • Circumference Length Shortest/Longest: 108 mm. and 1530 mm. • Material: Tooth: Rubber Core wire: Glass Fiber [Applications] Suitable for use with a timing pulley in a transmission system in an automation machine
- Volume Discount
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type S3M Closed End 6 ～ 15 Rubber Belt Standard (Single Sided) Glass Fiber - Round Tooth Profile Super Torque From: 146,070 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
BANDO CHEMICAL
Engages properly and can transmit force. Lubrication not required, and replacing almost totally unnecessary.[Features]· Belt and pulley mesh properly, and number of rotations and movement amounts can be obtained just as calculated.· No metal-to-metal contact, so no lubrication equipment is not required.· High initial tension not required, so bearings and motors can be made small.· In addition to the standard specification, the next special specification synchro belt is being created.· Synchro belt for high loads (for high-load transmission…XH, XXH type).· An oil-resistant synchro belt (for use in places exposed to large amounts of oil).· A heat-resistant synchro belt (for use in places 90°C to 120°C).
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type L Closed End - Rubber Belt Standard (Single Sided) Glass Fiber 0.5 ～ 2 Trapezoidal Tooth Profile Circular Type From: 317,770 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Timing Belts/MXL/Compatible with the Timing Pulleys MXL
MISUMI
General purpose timing pulleys suitable for torque transmission and light load conveyance.[Material]-TBN Belt: Chloroprene rubber, Core wire: Fiberglass cord S/Z alternately twisted continuous, Cloth: Nylon cloth-TUN Belt: Polyurethane, Core wire: Kevlar[Belt shape] Endless[Operating temperature]· Rubber: -30 °C to 90 °C· Polyurethane: 0 °C to 80 °C[Related Products]· Timing pulley Timing Pulley MXL Type· Idler Idler with Teeth Center Bearing, Idler with Teeth Both Sides Bearing, Idler - Backside Tensioning Center Bearing, Idler - Backside Tensioning Both Sides Bearing
- Volume Discount
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type MXL Closed End 4.8 ～ 12.7 Rubber Belt / Polyurethane Belt Standard (Single Sided) Glass Fiber / Aramid 0.19 ～ 0.5 Trapezoidal Tooth Profile Circular Type From: 72,890 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
RoHS Compliant Product
- Volume Discount
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type P8M Closed End 15 ～ 25 Rubber Belt Standard (Single Sided) Glass Fiber - Circular Tooth Profile PX Belt From: 41,425 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyOpen Timing Belt STD S3M/S5M/S8M
MiSUMi EconomyMISUMI
- RoHS
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type S3M / S5M / S8M Open End 6 ～ 40 Polyurethane Belt Standard (Single Sided) Steel Cord - Round Tooth Profile Super Torque Days to Ship: Số ngày giao hàng: 14 Day(s)
14 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
RoHS Compliant Product
- RoHS
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type - Open End - Polyurethane Belt Standard (Single Sided) Steel Cord - Trapezoidal Tooth Profile Circular Type Days to Ship: Số ngày giao hàng: 12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
BANDO CHEMICAL
[Features]· Belt and pulley mesh properly, and number of rotations and movement amounts can be obtained just as calculated.· No metal-to-metal contact, so no lubrication equipment is not required.· High initial tension not required, so bearings and motors can be made small.· In addition to the standard specification, the next special specification synchro belt is being created.
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type MXL Closed End 3.2 ～ 12.7 Rubber Belt Standard (Single Sided) Glass Fiber - Trapezoidal Tooth Profile Circular Type From: 98,175 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
"Have the higher allowable tension than standard Polyurethane products and thus, are suitable for being used for stable reciprocal motions."
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type MA3 / MA5 / MA8 / XL / L / H / T5 / T10 / AT5 / AT10 Open End 6.4 ～ 50.8 Polyurethane Belt Standard (Single Sided) Steel Cord 0.25 ～ 2 Trapezoidal Tooth Profile Circular Type / Trapezoidal Tooth Profile Metric Type / Circular Tooth Profile MA Belt Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
RoHS Compliant Product
- RoHS
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type - Open End - Polyurethane Belt Standard (Single Sided) Steel Cord - Circular Tooth Profile HTD Belt Days to Ship: Số ngày giao hàng: 12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
Power Grip EV Belt, EV8YU Type
UNITTA
Power Grip EV Belt, EV8YU Type It is a circular tooth profile timing belt. This belt always uses for high torque transmission in an automation machine [Features] • Belt Shape: Closed End • Belt Tooth Type: EV8YU (circular tooth profile) • Tooth Pitch: 8 mm. • Belt Width: 15, 20, 25, 30, 40, 50, 60, 70 and 85 mm. • Circumference Length Shortest/Longest: 312 mm. and 5008 mm. • Material: Tooth: Rubber Core wire: Glass Fiber [Applications] Suitable for use with a timing pulley in a transmission system in an automation machine
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type EV8YU Closed End 15 ～ 70 Rubber Belt Standard (Single Sided) Glass Fiber - Circular Tooth Profile EV Belt From: 371,336 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Timing Belts/Super High Torque/EV8YU
MISUMI
Since it has an arc tooth profile, it has little backlash and is suitable for high-precision positioning applications.[Material] Belt: High modulus rubber, Core wire: Glass fiber cord, Cloth: Nylon cloth[Belt shape] Endless[Operating temperature] -10 °C to 80 °C
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type EV8YU Closed End 15 ～ 25 Rubber Belt Standard (Single Sided) Glass Fiber - Circular Tooth Profile EV Belt From: 451,660 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
General purpose timing pulleys suitable for torque transmission and light load conveyance.
- Volume Discount
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type P8M Closed End 15 ～ 25 Rubber Belt Standard (Single Sided) Glass Fiber - Circular Tooth Profile PX Belt From: 585,949 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
RoHS Compliant Product
- Volume Discount
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type P5M Closed End 10 ～ 15 Rubber Belt Standard (Single Sided) Glass Fiber - Circular Tooth Profile PX Belt From: 38,102 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Poly Chain GT Carbon Belt, 14MGT Type
UNITTA
Poly Chain GT Carbon Belt, 14MGT Type This belt always uses for power transmission in an automation machine [Features] • Belt Shape: Closed End • Belt Tooth Type: 14MGT • Tooth Pitch: 14 mm. • Belt Width: 20, 40, 60, 80, 100 and 130 mm. • Circumference Length Shortest/Longest: 994 mm. and 4410 mm. • Material: Tooth rubber: Polyurethane Core wire: Steel Cord [Applications] Suitable for use with a timing pulley in a transmission system in an automation machine
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type 14MGT CB Closed End 20 ～ 130 Polyurethane Belt Standard (Single Sided) Carbon - - From: 5,154,503 VND Days to Ship: Số ngày giao hàng: 35 Day(s) or more
35 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Super High Torque Timing Belts/MTS8M
MISUMI
Having nearly doubled transmittion capacity compared to standard timing belts, higher load transmittion and space-saving design can be realized[Material] Belt: High hardness synthetic rubber, hardness 88°, Core wire: Glass core wire, Cloth : Nylon cloth[Belt shape] Endless[Operating temperature] -30 °C to 90 °C[Note]· Applicable to Timing Pulley S8M· Backside color of MTS8M is black.
- Volume Discount
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type MTS8M Closed End 15 ～ 40 Rubber Belt Standard (Single Sided) Glass Fiber - Round Tooth Profile Mega Torque From: 727,744 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
- RoHS
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type XL / L / H Open End 6.4 ～ 50.8 Polyurethane Belt Standard (Single Sided) Steel Cord 25 ～ 200 Trapezoidal Tooth Profile Circular Type Days to Ship: Số ngày giao hàng: 14 Day(s)
14 Day(s)
-
You can add up to 6 items per a category to the compare list.
Power Grip EV Belt, EV14M Type
UNITTA
Power Grip EV Belt, EV14M Type It is a circular tooth profile timing belt. This belt always uses for high torque transmission in an automation machine [Features] • Belt Shape: Closed End • Belt Tooth Type: EV14M (circular tooth profile) • Tooth Pitch: 14 mm. • Belt Width: 30, 40, 55, 60, 70 and the widest size is 170 mm. • Circumference Length Shortest/Longest: 966 mm. and 4326 mm. • Material: Tooth: Rubber Core wire: Glass Fiber [Applications] Suitable for use with a timing pulley in a transmission system in an automation machine
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type EV14M Closed End 30 ～ 85 Rubber Belt Standard (Single Sided) Glass Fiber - Circular Tooth Profile EV Belt From: 4,148,948 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Poly Chain GT Carbon Belt, 8MGT Type
UNITTA
Super high torque large type transmission belt 8 mm, uses carbon in its core wires. Transmission ability on par with chains[Features]· Ultra high-torque belt on par with roller chains.· Uses carbon in the core wire of its belt configuration materials to achieve ultra-high transmission volume that outstrips that of conventional belt drives
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type 8MGT CB Closed End 12 ～ 80 Polyurethane Belt Standard (Single Sided) Carbon - - From: 1,381,135 VND Days to Ship: Số ngày giao hàng: 16 Day(s) or more
16 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MEGADYNE
It is Urethane Timing Belt made in Italy.
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type - Closed End 5 ～ 300 Polyurethane Belt Standard (Single Sided) - - - From: 358,400 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
- RoHS
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type 3M / 5M / 8M Open End 6 ～ 40 Polyurethane Belt Standard (Single Sided) Steel Cord - Circular Tooth Profile HTD Belt Days to Ship: Số ngày giao hàng: 14 Day(s)
14 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUBOSHI BELTING
Mitsuboshi Belting standard S14M timing belt.Belt that is ideal for applications that require high-precision smooth rotation, such as computers, office equipment, etc. Takes full advantage of the round tooth shape.[Material]Belt: Chloroprene, core wire: Glass fiber, aramid fiber[Belt Shape]Endless[Operating Temperature]-30°C to 80°C[Belt Type (Width Dimension)]400S14M (40 mm), 600S14M (60 mm), 800S14M (80 mm), 1000S14M (100 mm), 1200S14M (120 mm)[Features]·A product with a wide variety of tooth profiles and size variations, with excellent versatility and availability.·High transmission is obtained, so it can be widely used.·Long lifespan and low noise. Realized cost reduction.[Application]·Ideal for woodworking machines, machine tools, paper machines, printing machines, fans, blowers.
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type S14M Closed End 40 ～ 120 Rubber Belt Standard (Single Sided) Glass Fiber - Round Tooth Profile Super Torque From: 2,869,188 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Power Grip Timing Belt MXL Type
UNITTA
Power Grip Timing Belt, MXL Type It is a trapezoidal tooth profile timing belt. This belt always uses in an automation machine [Features] • Belt Shape: Closed End • Belt Tooth Type: MXL (trapezoidal tooth profile) • Tooth Pitch: 2.032 mm. • Belt Width: 3.2, 4.8, 6.4, 7.9, 9.5 and 12.7 mm. • Circumference Length Shortest/Longest: 79.25 mm. and 2416.05 mm. • Material: Tooth rubber: Chloroprene Core wire: Glass Fiber Tooth surface protection layer: Nylon canvas [Applications] Suitable for use with a timing pulley in a transmission system in an automation machine
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type MXL Closed End 3.2 ～ 12.7 Rubber Belt Standard (Single Sided) Glass Fiber - - From: 101,020 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Super torque synchronous belt type STS S2M
BANDO CHEMICAL
Capable of high-torque transmission. Long life. Lubrication not required. The belt width can be made narrower than conventional belts with teeth.[Features]· Uses ideal tooth profile for smooth engagement and has unique engagement that eliminates concentration of stress to enable high-torque transmission.· Engagement with pulley is smooth, and belt tooth tips adhere to pulley groove bottoms, muffling strike sounds and lowering running noise.· Has a large transmission capacity so the belt with can be made narrow, and as there is no need for lubrication, lubrication equipment is not required.· Enables space-saving and economical transmission
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type S2M Closed End 4 ～ 10 Rubber Belt Standard (Single Sided) Glass Fiber - Round Tooth Profile Super Torque From: 121,350 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Super High Torque Timing Belts/UP5M
MISUMI
Having nearly doubled transmittion capacity compared to standard timing belts, higher load transmittion and space-saving design can be realized[Material] Belt: Chloroprene rubber, Core wire: Glass core wire, Cloth : Nylon cloth[Belt shape] Endless[Operating temperature] -15 °C to 80 °C[Note]· Applicable to Timing Pulley P5M· Rubber color on the back side is black.
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type UP5M Closed End 10 ～ 15 Rubber Belt Standard (Single Sided) Glass Fiber - Circular Tooth Profile Ultra PX Belt From: 465,630 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
RoHS Compliant Product
- Volume Discount
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type S14M Closed End 40 ～ 60 Rubber Belt Standard (Single Sided) Glass Fiber - Round Tooth Profile Super Torque From: 396,576 VND Days to Ship: Số ngày giao hàng: 8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
UNITTA
Power Grip HTD Timing Belt, 3M Type It is a circular tooth profile timing belt. This belt always uses for transmission system in an automation machine [Features] • Belt Shape: Closed End • Belt Tooth Type: 3M (circular tooth profile) • Tooth Pitch: 3 mm. • Belt Width: 6, 9 and 15 mm. • Circumference Length Shortest/Longest: 108 mm. and 1890 mm. • Material: Tooth rubber: Chloroprene Core wire: Glass Fiber [Applications] Suitable for use with a timing pulley in a transmission system in an automation machine
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type 3M Closed End 6 ～ 15 Rubber Belt Standard (Single Sided) Glass Fiber - Circular Tooth Profile HTD Belt From: 149,230 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Power Grip Timing Belt, L Type
UNITTA
Teeth on one side of the belt have trapezoidal tooth profile L type, and are JIS and ISO standard
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type L Closed End 50 ～ 100 Rubber Belt Standard (Single Sided) Glass Fiber - - From: 335,288 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Super torque synchronous belt type STS S4.5M
BANDO CHEMICAL
Capable of high-torque transmission. Long life. Lubrication not required. The belt width can be made narrower than conventional belts with teeth.[Features]· Uses ideal tooth profile for smooth engagement and has unique engagement that eliminates concentration of stress to enable high-torque transmission.· Engagement with pulley is smooth, and belt tooth tips adhere to pulley groove bottoms, muffling strike sounds and lowering running noise.· Has a large transmission capacity so the belt with can be made narrow, and as there is no need for lubrication, lubrication equipment is not required.· Enables space-saving and economical transmission
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type S4.5M Closed End 6 ～ 15 Rubber Belt Standard (Single Sided) Glass Fiber - Round Tooth Profile Super Torque From: 181,913 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UNITTA Mectrol Endless Type, Trapezoidal Tooth Profile, Milli-Pitch
UNITTA
Cutaway type of belt that is molded so that core wire is embedded in parallel and is given endless machining to the desired length.
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type T5 / T10 / AT10 Closed End 10 ～ 100 Polyurethane Belt Standard (Single Sided) Aramid / Steel Cord - - Days to Ship: Số ngày giao hàng: 14 Day(s) or more
14 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UNITTA Mectrol Open End Type, Round Tooth Profile, Milli-Pitch
UNITTA
Cutaway type of belt that is molded so that core wire is embedded in parallel and is cut to the desired length.
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type 8YU / 5M / 8M / 14M Open End 10 ～ 100 Polyurethane Belt Standard (Single Sided) Steel Cord - - Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Timing Belts/H/Compatible with the Timing Pulleys H
MISUMI
General purpose timing pulleys suitable for torque transmission and light load conveyance.[Material]Belt: Chloroprene rubber, Core wire: Fiberglass cord S/Z alternately twisted continuous, Cloth: Nylon cloth[Belt shape] Endless[Operating temperature]· Rubber: -30 °C to 90 °C[Related Products]· Timing pulley Timing Pulley H Type· Idler Idler with Teeth Center Bearing, Idler with Teeth Both Sides Bearing, Idler - Backside Tensioning Center Bearing, Idler - Backside Tensioning Both Sides Bearing
- Volume Discount
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type H Closed End 19.1 ～ 50.8 Rubber Belt Standard (Single Sided) Glass Fiber 0.75 ～ 2 Trapezoidal Tooth Profile Circular Type From: 397,826 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Power Grip Timing Belt, H Type
UNITTA
Teeth on one side of the belt have trapezoidal tooth profile H type, and are JIS and ISO standard
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type H Closed End 100 ～ 150 Rubber Belt Standard (Single Sided) Glass Fiber - - From: 976,730 VND Days to Ship: Số ngày giao hàng: 28 Day(s) or more
28 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UNITTA Mectrol Flex Type, U-Flex
UNITTA
UNITTA Mectrol Flex Type, U-Flex It is a flex timing belt,which was used in a transmission system in an automation [Features] • Belt Shape: Open End • Belt Tooth Type: T5, T10, T80, AT5, AT10 • Tooth Pitch: 5 and 10 mm. • Belt Width: 10, 15, 20 and 25 mm. • Material: Tooth rubber: Thermoplastic polyurethane UA (white / hardness 92) Core wire: Steel cord [Applications] Suitable for use with a timing pulley in a transmission system in an automation machine
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type T10 Closed End 15 ～ 100 Polyurethane Belt Standard (Single Sided) Steel Cord - - Days to Ship: Số ngày giao hàng: 22 Day(s) or more
22 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
- RoHS
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type T5 / T10 Open End 10 ～ 50 Polyurethane Belt Standard (Single Sided) Steel Cord - Trapezoidal Tooth Profile Circular Type Days to Ship: Số ngày giao hàng: 14 Day(s)
14 Day(s)
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
KATAYAMA CHAIN
Compared to chain transmission, lighter weight and higher speed rotation is possible. No lubrication required, low noise and clean transmission.
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type XL Closed End 6.4 ～ 12.7 Rubber Belt / Polyurethane Belt Standard (Single Sided) Glass Fiber / Steel Cord 0.25 ～ 0.5 Trapezoidal Tooth Profile Circular Type Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
2GT, Gear Pitch 2 mm, Belt Width 6 mm (Low Dust Generation Belt) _2GT
NABEYA BI-TECH
[Features]· Tooth pitch: 2 mm.· BLP: Backlash-less pulley.· 0 backlash per tooth.· Low dust generating belt with special coating.· Does not create rubber powder.· Optimal for small precision equipment.· Can be used in 50W to 200W motors.· Customized items with different timing pulley teeth numbers and shapes, timing belt lengths etc. also manufactured.
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type 2GT Closed End 6 Rubber Belt Standard (Single Sided) Glass Fiber - Circular Tooth Profile GT Belt From: 206,955 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
3GT tooth pitch 3 mm / belt width 9 mm 3GT
NABEYA BI-TECH
[Features]· Tooth pitch: 2 mm.· BLP: Backlash-less pulley.· 0 backlash per tooth.· Optimal for small precision equipment.· Can be used in 100W to 1000W motors.· Customized items with different timing pulley teeth numbers and shapes, timing belt lengths etc. also manufactured.
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type 3GT Closed End 9 Rubber Belt Standard (Single Sided) Glass Fiber - Circular Tooth Profile GT Belt From: 309,501 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Power Grip GT Belt, 1.5GT Type
UNITTA
[Features]· 1.5GT for precision transmission.· Pitch size has been reduced for reduced engagement vibration.· Involute operation provides smooth engagement.
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type 1.5GT Closed End 2 ～ 4 Rubber Belt Standard (Single Sided) Glass Fiber - Circular Tooth Profile GT Belt From: 84,288 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
UNITTA Mectrol Open End Type, Trapezoidal Tooth Profile, Milli-Pitch
UNITTA
UNITTA Mectrol Open End Type, Trapezoidal Tooth Profile, Milli-Pitch It is a trapezoidal tooth profile timing belt. This belt always uses in an automation machine [Features] • Belt Shape: Open End • Belt Tooth Type: T5, T10, AT10, AT20 (trapezoidal tooth profile) • Tooth Pitch: 5, 10, 20 mm. • Belt Width: 10, 15, 20 and 25 mm. • Material: Tooth rubber: Polyurethane Core wire: Aramid and steel cord [Applications] Suitable for use with a timing pulley in a transmission system in an automation machine
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type T5 / T10 / AT10 / AT20 Open End 10 ～ 100 Polyurethane Belt Standard (Single Sided) Aramid / Steel Cord - - Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Super High Torque Timing Belts/UP8M
MISUMI
Having nearly doubled transmittion capacity compared to standard timing belts, higher load transmittion and space-saving design can be realized[Material] Belt: Chloroprene rubber, Core wire: Glass core wire, Cloth : Nylon cloth[Belt shape] Endless[Operating temperature] -15 °C to 80 °C[Note]· Applicable to Timing Pulley P8M· Rubber color on the back side is blue.
Belt Series Belt Shape Nominal Width W(mm) Belt Material Belt Tooth Surface Core Wire Material Nominal Width W(Inch) Belt Shape Type UP8M Closed End 15 ～ 25 Rubber Belt Standard (Single Sided) Glass Fiber - Circular Tooth Profile Ultra PX Belt From: 1,280,746 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Belt Series |
| Belt Shape |
| Nominal Width W(mm) |
| Belt Material |
| Belt Tooth Surface |
| Core Wire Material |
| Nominal Width W(Inch) |
| Belt Shape Type |
You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | MISUMI | MITSUBOSHI BELTING | MISUMI | BANDO CHEMICAL | NOK | BANDO CHEMICAL | BANDO CHEMICAL | MISUMI | MISUMI | MISUMI | MISUMI | BANDO CHEMICAL | MISUMI | MISUMI | UNITTA | MISUMI | MISUMI | MISUMI | UNITTA | MISUMI | MISUMI | UNITTA | UNITTA | MEGADYNE | MISUMI | MITSUBOSHI BELTING | UNITTA | BANDO CHEMICAL | MISUMI | MISUMI | UNITTA | UNITTA | BANDO CHEMICAL | UNITTA | UNITTA | MISUMI | UNITTA | UNITTA | MISUMI | KATAYAMA CHAIN | NABEYA BI-TECH | NABEYA BI-TECH | UNITTA | UNITTA | MISUMI |
| Product SeriesDòng sản phẩm | UNITTA Mectrol Endless Type, Trapezoidal Tooth Profile, Milli-Pitch | UNITTA Mectrol Open End Type, Round Tooth Profile, Milli-Pitch | 2GT, Gear Pitch 2 mm, Belt Width 6 mm (Low Dust Generation Belt) _2GT | UNITTA Mectrol Open End Type, Trapezoidal Tooth Profile, Milli-Pitch | |||||||||||||||||||||||||||||||||||||||||
| CADCAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||
| From | 243,478 VND Special Price On Sale Till 31/03/2025 | 74,566 VND | 281,088 VND Special Price On Sale Till 31/03/2025 | 613,393 VND | 146,070 VND | 317,770 VND | 72,890 VND Special Price On Sale Till 31/03/2025 | 41,425 VND | 98,175 VND | 371,336 VND | 451,660 VND | 585,949 VND | 38,102 VND | 5,154,503 VND | 727,744 VND | 4,148,948 VND | 1,381,135 VND | 358,400 VND | 2,869,188 VND | 101,020 VND | 121,350 VND Special Price On Sale Till 31/03/2025 | 465,630 VND | 396,576 VND | 149,230 VND Special Price On Sale Till 31/03/2025 | 335,288 VND | 181,913 VND | 397,826 VND Special Price On Sale Till 31/03/2025 | 976,730 VND | 206,955 VND | 309,501 VND | 84,288 VND | 1,280,746 VND | |||||||||||||
| Days to ShipSố ngày giao hàng | Same day or more | 4 Day(s) or more | Same day or more | 6 Day(s) or more | 17 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 8 Day(s) | 14 Day(s) | 12 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 12 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 35 Day(s) or more | 8 Day(s) or more | 14 Day(s) | 8 Day(s) or more | 16 Day(s) or more | 9 Day(s) | 14 Day(s) | 8 Day(s) or more | 6 Day(s) or more | Same day or more | 8 Day(s) or more | 8 Day(s) | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 14 Day(s) or more | 11 Day(s) or more | Same day or more | 28 Day(s) or more | 22 Day(s) or more | 14 Day(s) | Same day or more | 9 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
| Belt Series | L | MXL | EV5GT | H | AT10 | S3M | L | MXL | P8M | S3M / S5M / S8M | - | MXL | MA3 / MA5 / MA8 / XL / L / H / T5 / T10 / AT5 / AT10 | - | EV8YU | EV8YU | P8M | P5M | 14MGT CB | MTS8M | XL / L / H | EV14M | 8MGT CB | - | 3M / 5M / 8M | S14M | MXL | S2M | UP5M | S14M | 3M | L | S4.5M | T5 / T10 / AT10 | 8YU / 5M / 8M / 14M | H | H | T10 | T5 / T10 | XL | 2GT | 3GT | 1.5GT | T5 / T10 / AT10 / AT20 | UP8M |
| Belt Shape | Closed End | Closed End | Closed End | Closed End | Closed End / Open End | Closed End | Closed End | Closed End | Closed End | Open End | Open End | Closed End | Open End | Open End | Closed End | Closed End | Closed End | Closed End | Closed End | Closed End | Open End | Closed End | Closed End | Closed End | Open End | Closed End | Closed End | Closed End | Closed End | Closed End | Closed End | Closed End | Closed End | Closed End | Open End | Closed End | Closed End | Closed End | Open End | Closed End | Closed End | Closed End | Closed End | Open End | Closed End |
| Nominal Width W(mm) | 12.7 ～ 38.1 | 3.2 ～ 12.7 | 9 ～ 15 | - | 25 | 6 ～ 15 | - | 4.8 ～ 12.7 | 15 ～ 25 | 6 ～ 40 | - | 3.2 ～ 12.7 | 6.4 ～ 50.8 | - | 15 ～ 70 | 15 ～ 25 | 15 ～ 25 | 10 ～ 15 | 20 ～ 130 | 15 ～ 40 | 6.4 ～ 50.8 | 30 ～ 85 | 12 ～ 80 | 5 ～ 300 | 6 ～ 40 | 40 ～ 120 | 3.2 ～ 12.7 | 4 ～ 10 | 10 ～ 15 | 40 ～ 60 | 6 ～ 15 | 50 ～ 100 | 6 ～ 15 | 10 ～ 100 | 10 ～ 100 | 19.1 ～ 50.8 | 100 ～ 150 | 15 ～ 100 | 10 ～ 50 | 6.4 ～ 12.7 | 6 | 9 | 2 ～ 4 | 10 ～ 100 | 15 ～ 25 |
| Belt Material | Rubber Belt / Polyurethane Belt | Rubber Belt | Rubber Belt | Rubber Belt | Polyurethane Belt | Rubber Belt | Rubber Belt | Rubber Belt / Polyurethane Belt | Rubber Belt | Polyurethane Belt | Polyurethane Belt | Rubber Belt | Polyurethane Belt | Polyurethane Belt | Rubber Belt | Rubber Belt | Rubber Belt | Rubber Belt | Polyurethane Belt | Rubber Belt | Polyurethane Belt | Rubber Belt | Polyurethane Belt | Polyurethane Belt | Polyurethane Belt | Rubber Belt | Rubber Belt | Rubber Belt | Rubber Belt | Rubber Belt | Rubber Belt | Rubber Belt | Rubber Belt | Polyurethane Belt | Polyurethane Belt | Rubber Belt | Rubber Belt | Polyurethane Belt | Polyurethane Belt | Rubber Belt / Polyurethane Belt | Rubber Belt | Rubber Belt | Rubber Belt | Polyurethane Belt | Rubber Belt |
| Belt Tooth Surface | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) | Standard (Single Sided) |
| Core Wire Material | Glass Fiber / Steel Cord | Glass Fiber | Glass Fiber | Glass Fiber | Stainless Steel / Steel Cord | Glass Fiber | Glass Fiber | Glass Fiber / Aramid | Glass Fiber | Steel Cord | Steel Cord | Glass Fiber | Steel Cord | Steel Cord | Glass Fiber | Glass Fiber | Glass Fiber | Glass Fiber | Carbon | Glass Fiber | Steel Cord | Glass Fiber | Carbon | - | Steel Cord | Glass Fiber | Glass Fiber | Glass Fiber | Glass Fiber | Glass Fiber | Glass Fiber | Glass Fiber | Glass Fiber | Aramid / Steel Cord | Steel Cord | Glass Fiber | Glass Fiber | Steel Cord | Steel Cord | Glass Fiber / Steel Cord | Glass Fiber | Glass Fiber | Glass Fiber | Aramid / Steel Cord | Glass Fiber |
| Nominal Width W(Inch) | 0.5 ～ 1.5 | - | - | 0.75 ～ 3 | - | - | 0.5 ～ 2 | 0.19 ～ 0.5 | - | - | - | - | 0.25 ～ 2 | - | - | - | - | - | - | - | 25 ～ 200 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.75 ～ 2 | - | - | - | 0.25 ～ 0.5 | - | - | - | - | - |
| Belt Shape Type | Trapezoidal Tooth Profile Circular Type | Trapezoidal Tooth Profile Circular Type | Circular Tooth Profile EV Belt | Trapezoidal Tooth Profile Circular Type | Trapezoidal Tooth Profile AT Type | Round Tooth Profile Super Torque | Trapezoidal Tooth Profile Circular Type | Trapezoidal Tooth Profile Circular Type | Circular Tooth Profile PX Belt | Round Tooth Profile Super Torque | Trapezoidal Tooth Profile Circular Type | Trapezoidal Tooth Profile Circular Type | Trapezoidal Tooth Profile Circular Type / Trapezoidal Tooth Profile Metric Type / Circular Tooth Profile MA Belt | Circular Tooth Profile HTD Belt | Circular Tooth Profile EV Belt | Circular Tooth Profile EV Belt | Circular Tooth Profile PX Belt | Circular Tooth Profile PX Belt | - | Round Tooth Profile Mega Torque | Trapezoidal Tooth Profile Circular Type | Circular Tooth Profile EV Belt | - | - | Circular Tooth Profile HTD Belt | Round Tooth Profile Super Torque | - | Round Tooth Profile Super Torque | Circular Tooth Profile Ultra PX Belt | Round Tooth Profile Super Torque | Circular Tooth Profile HTD Belt | - | Round Tooth Profile Super Torque | - | - | Trapezoidal Tooth Profile Circular Type | - | - | Trapezoidal Tooth Profile Circular Type | Trapezoidal Tooth Profile Circular Type | Circular Tooth Profile GT Belt | Circular Tooth Profile GT Belt | Circular Tooth Profile GT Belt | - | Circular Tooth Profile Ultra PX Belt |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Belt Series
- MXL
- XL
- L
- H
- XH
- XXH
- T5
- T10
- T80
- AT5
- AT10
- AT20
- S2M
- S3M
- S5M
- S8M
- S14M
- MTS8M
- HTD 8M
- 8MGT CB
- 14MGT CB
- EV5GT
- EV8YU
- EV14M
- 1.5GT
- 2GT
- 3GT
- 5GT
- 8YU
- MA3
- MA5
- MA8
- P2M
- P3M
- P5M
- P8M
- UP5M
- UP8M
- DH
- 3M
- 5M
- 8M
- 14M
- S4.5M
-
Belt Shape
-
Closed End
-
Open End
-
Belt Clamp Plates
-
Belt Tension Meters
-
Closed End
-
Nominal Width W(mm)
- 1
- 2
- 2.5
- 3
- 3.2
- 4
- 4.8
- 5
- 6
- 6.4
- 7
- 7.9
- 9
- 9.4
- 9.5
- 10
- 12
- 12.7
- 15
- 17.8
- 19.1
- 20
- 25
- 25.4
- 30
- 35
- 37
- 38.1
- 40
- 45
- 50
- 50.8
- 55
- 60
- 63.5
- 65
- 70
- 75
- 76.2
- 80
- 85
- 90
- 95
- 100
- 101.6
- 105
- 110
- 115
- 120
- 125
- 127
- 130
- 135
- 140
- 145
- 150
- 152.4
- 155
- 160
- 165
- 170
- 175
- 180
- 185
- 190
- 195
- 200
- 205
- 210
- 215
- 220
- 225
- 230
- 235
- 240
- 245
- 250
- 255
- 260
- 265
- 270
- 275
- 280
- 285
- 290
- 295
- 300
-
Belt Material
- Rubber Belt
- Polyurethane Belt
-
Belt Tooth Surface
-
Standard (Single Sided)
-
Double (Both Sided)
-
Standard (Single Sided)
-
Core Wire Material
-
Nominal Width W(Inch)
-
Belt Shape Type
Related Categories to Timing BeltDanh mục liên quan đến Timing Belt
FAQ Timing Belt
- Question: How many type of Timing Belt and how to select?
- Answer: 1. Flat Belt - This belt was designed for light-duty power transmissions that don't have teeth and can operate at high speed. The cross-section of this belt is long and thin rectangular.
2. V Belt- This belt was designed for heavy-duty power transmission and can operate in low and high-speed transmission. The cross-section of this belt is trapezoid-shaped.
3. Round Belt - This belt was designed for low-power transmission and light-loading machines and smaller tasks. The cross-section of this belt is circular shaped
4. Timing Belt - This belt can operate at high and low speeds appropriate for accuracy work and can change the rotation direction while driving. This belt has many teeth shaped - Question: What is the Timing Belt drive function?
- Answer: A Timing Belt drive is a frictional drive that transmits power between two object from driver equipment such as a motor to driven components
For example
– V-Belt - This belt was used in a motor transmission system in the engine
– Timing Belt- This belt was used in an automation machine or automatic slide door system - Question: What type of Timing Belt, which popular use in manufacturing?
- Answer: In general, we can find 2 belts which commonly use in manufacturing consist of
– V- Belt: It is used in an engine, agriculture vehicle, and motor in a machine such as a Drilling machine, Milling machine, Lathe machine, Exhaust fan, and so on.
– Timing Belt: It is used in an automatic machine like CNC - Question: What kind of equipment use with Timing Belt?
- Answer: The equipment used with a Timing Belt consist of
– Pulley: This equipment was used for transmitting power from the source (rotary ) to another in a drive mechanism and sometimes use to change the alignment of the belt
– Belt Tension: This equipment is used for adjusting the belt tension
– Timing Belt Clamp Plates This equipment is used for connecting the timing belt open end type - Question: Material of Timing Belt?
- Answer: The material of a Timing Belt typically consists of several components:
1. Rear rubber: Chloroprene rubber
2. Tooth Rubber: Chloroprene rubber
3. Core wire: Glass Fiber
4. Backing cloth (Tooth Fabric): Nylon canvas
Additionally, some timing belts are made from Rubber and others from Polyurethane. The tooth rubber often adopts chloroprene to protect the core wire from dirt, grease, and wet environments.
- Câu hỏi: Có bao nhiêu loại dây đai (dây cu-roa) và cách để lựa chọn?
- Trả lời: 1. Đai dẹt (đai phẳng) – Loại đai này được thiết kế cho những bộ truyền công suất nhỏ, chúng không có răng và có thể hoạt động ở tốc độc cao. Mặt cắt ngang của loại dây đai này có dạng hình chữ nhật dài và hẹp.
2. Đai chữ V (V-Belt) – Loại dây đai này được thiết kế cho những bộ truyền công suất lớn, chúng có thể hoạt động trong cả tốc độ truyền thấp lẫn cao. Mặt cắt ngang của dây đai này có hình thang.
3. Dây đai tròn – Loại dây đai này được thiết kế cho các bộ truyền công suất nhỏ, máy móc tải trọng nhẹ và các nhiệm vụ nhẹ nhàng hơn. Mặt cắt ngang của dây đai này có hình tròn.
4. Dây đai định thời (đai đồng bộ) – Loại dây đai này có thể hoạt động được ở vận tốc thấp đến cao, phù hợp cho các công việc đòi hỏi độ chính xác và thay đổi chiều quay trong khi hoạt động. Dây đai này có nhiều hình răng. - Câu hỏi: Chức năng của dây đai là gì?
- Trả lời: Truyền động đai là bộ truyền động ma sát giúp truyền tải lực giữa hai vật thể từ thiết bị truyền động như động cơ đến các thành phần được dẫn động.
Ví dụ:
- Đai chữ V (V-Belt) – Được sử dụng trong hệ thống truyền động ở động cơ.
- Đai định thời – Được sử dụng trong các máy tự động hóa hoặc hệ thống cửa trượt tự động. - Câu hỏi: Loại dây đai nào được sử dụng phổ biến trong sản xuất?
- Trả lời: Nhìn chung, có 2 loại dây đai thường được sử dụng trong sản xuất bao gồm:
– Đai chữ V (V-Belt): Được sử dụng trong động cơ, xe nông nghiệp và động cơ trong máy móc như Máy khoan, Máy phay, Máy tiện, Quạt hút, …
– Đai định thời: Được sử dụng trong máy tự động như CNC. Câu hỏi: Loại thiết bị nào thường được sử dụng với dây đai? - Câu hỏi: Loại thiết bị nào thường được sử dụng với dây đai?
- Trả lời: Các thiết bị được sử dụng với dây đai bao gồm:
– Ròng rọc (puli): Thiết bị này được sử dụng để truyền lực từ nguồn (quay) đến vị trí khác trong cơ cấu truyền động và đôi khi được sử dụng để thay đổi độ thẳng hàng của dây đai cam.
– Bộ căng dây đai: Thiết bị này được sử dụng để điều chỉnh độ căng của dây đai.
– Tấm kẹp dây đai: Thiết bị này được sử dụng để kết nối các đầu hở của dây đai. - Câu hỏi: Vật liệu của dây đai là gì?
- Trả lời: Vật liệu của dây đai thường bao gồm một số thành phần:
1. Lớp cao su nền: Cao su cloropren
2. Cao su răng: Cao su cloropren
3. Dây lõi: Sợi thủy tinh
4. Vải lót (Vải răng): Vải bạt nylon
Ngoài ra, một số dây đai được làm từ Cao su và một số khác làm từ Polyurethane. Cao su làm răng đai thường là cao su cloropren, giúp bảo vệ dây lõi khỏi bụi bẩn, dầu mỡ và môi trường ẩm ướt. - Misumi Việt Nam cung cấp các loại dây đai răng chất lượng, giá tốt, giao hàng nhanh. Nhiều dòng sản phẩm thông dụng, thường thấy trong các giải pháp sản xuất bao gồm: dây đai răng 5M, dây đai răng 3M, dây đai răng 8M, dây đai răng S2M, dây đai răng S3M, dây đai răng S5M, dây đai răng S8M, dây đai răng S14M, dây curoa răng 3M, dây curoa răng 5M, đai răng GT2, dây cu roa răng, dây cu roa, dây đai răng, đai răng.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy