Single Axis Actuators（Accuracy：Standard Grade）

• Recommended

  You can add up to 6 items per a category to the compare list. Compare

  

  

  MiSUMi Economy

  Single Axis Actuators KS86 Standard/KSC86 With Cover

  MiSUMi Economy

  MISUMI

  The product does not come with a motor, driver and cable for signal, which must be purchased separately. 3D data on the web page is revised on the basis of 2D drawings contained in the basic information, and the revision of 3D data is estimated to finish by the end of March.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  68 / 46	Standard Grade	10 ～ 20	Long 1 pc. / Long 2 pcs.	Straight	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	75	Standard	15	Not Provided	60 ～ 112	-	-

  

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more
• Recommended

  You can add up to 6 items per a category to the compare list. Compare

  

  

  MiSUMi Economy

  Single Axis Actuators KS60 Standard/KSC60 With Cover

  MiSUMi Economy

  MISUMI

  The product does not come with a motor, driver and cable for signal, which must be purchased separately. 3D data on the web page is revised on the basis of 2D drawings contained in the basic information, and the revision of 3D data is estimated to finish by the end of March.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  48 / 33	Standard Grade	5 ～ 10	Long 1 pc. / Long 2 pcs.	Straight	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	51	Standard	12	Not Provided	42 ～ 86	-	-

  

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more
• Economy series

  You can add up to 6 items per a category to the compare list. Compare

  

  MiSUMi Economy

  Single Axis Actuators KS50 Standard/KSC50 With Cover

  MiSUMi Economy

  MISUMI

  The product does not come with a motor, driver and cable for signal, which must be purchased separately. 3D data on the web page is revised on the basis of 2D drawings contained in the basic information, and the revision of 3D data is estimated to finish by the end of March.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  26 / 40	Standard Grade	2 ～ 10	Long 1 pc. / Long 2 pcs.	Straight	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	47	Standard	8	Not Provided	35 ～ 62	-	-

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more
• Economy series

  You can add up to 6 items per a category to the compare list. Compare

  

  MiSUMi Economy

  Single Axis Actuators KS40 Standard/KSC40 With Cover

  MiSUMi Economy

  MISUMI

  The product does not come with a motor, driver and cable for signal, which must be purchased separately. 3D data on the web page is revised on the basis of 2D drawings contained in the basic information, and the revision of 3D data is estimated to finish by the end of March.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  32 / 20	Standard Grade	1 ～ 6	Long 1 pc. / Long 2 pcs.	Straight	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	33	Standard	8	Not Provided	26 ～ 52	-	-

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Axis Robot KK86 Type (Mounting Surface Height: 46, Width: 86)

  HIWIN

  · The HIWIN KK-type single axis robot uses a modular design that unifies ball screws and linear guide ways.· Simple to mount in confined spaces.· Uses a high precision ball screw transmission mechanism, and has a U-rail as a guide mechanism. These systems ensure precision and rigidity.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  46	Standard Grade	10 ～ 20	Long 1 pc. / Short 1 pcs	Straight	Main Body	Not Provided	Not Provided (Installed by customers)	43 ～ 75	Standard	15	Not Provided	60	Not Provided	Not Provided

  From: 21,069,980 VND
  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Axis Robot KK60 Type (Mounting Surface Height: 33, Width: 60)

  HIWIN

  · The HIWIN KK-type single axis robot uses a modular design that unifies ball screws and linear guide ways.· Simple to mount in confined spaces.· Uses a high precision ball screw transmission mechanism, and has a U-rail as a guide mechanism. These systems ensure precision and rigidity.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  33	Standard Grade	5 ～ 10	Long 1 pc. / Short 1 pcs	Straight	Main Body	Not Provided	Not Provided (Installed by customers)	28 ～ 51	Standard	12	Not Provided	42	Not Provided	Not Provided

  From: 16,213,441 VND
  Days to Ship: Số ngày giao hàng: 22 Day(s) or more

  22 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Axis Robot KK50 Type (Mounting Surface Height: 26, Width: 50)

  HIWIN

  · The HIWIN KK-type single axis robot uses a modular design that unifies ball screws and linear guide ways.· Simple to mount in confined spaces.· Uses a high precision ball screw transmission mechanism, and has a U-rail as a guide mechanism. These systems ensure precision and rigidity.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  26	Standard Grade	2	Long 1 pc.	Straight	Main Body	Not Provided	Not Provided (Installed by customers)	47	Standard	8	Not Provided	35	Not Provided	Not Provided

  From: 13,500,265 VND
  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Axis Actuators LST10 [C-Value - Driven by Belt]

  MISUMI

  Belt-driven Single Axis Actuators enabling long stroke- /fast speed-transferring/positioning operations economically.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  -	Standard Grade	-	Long 1 pc.	Folded	Main Body	Provided	Not Provided (Installed by customers)	50	Standard	-	Not Provided	62	Not Provided	Not Provided

  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator SKR33

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  33	Standard Grade	6 ～ 20	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Straight / Folded	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	39.5 ～ 76	Standard / Low Particle Generation	13	Not Provided	37.4 ～ 86	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Actuator KR45H

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  45	Standard Grade	10 ～ 20	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Straight / Folded	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	43.5 ～ 108	Standard / Low Particle Generation	15	Not Provided	53 ～ 104	Not Provided	Not Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator SKR33

  THK

  A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table. Therefore, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.[Effect of adopting ball retainer]·Due to the improved grease holding capacity, long-term maintenance-free operation has been achieved. (Lubricator QZ is attached to the ball screw section)・ Excellent sliding performance can be obtained due to elimination of mutual friction between balls and reduced torque fluctuation.・ In addition, the basic dynamic load rating of the LM guide and ball thread section is larger than before, so it has a long lifespan.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  33	Standard Grade	6 ～ 20	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	-	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	-	Standard	13	Not Provided	-	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR45H

  THK

  A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, since the housing A/B doubles as a support unit, and the inner block doubles as a table, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  45	Standard Grade	10 ～ 20	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	-	Main Body	-	Not Provided (Installed by customers)	-	Standard	15	Not Provided	-	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR46

  THK

  A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.It has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  46	Standard Grade	10 ～ 20	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	-	Main Body	-	Not Provided (Installed by customers)	-	Standard	15	Not Provided	-	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 20 Day(s) or more

  20 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Actuator KR26

  THK

  An actuator with a compact and high-stiffness structure that integrates an LM guide, ball screw, and support unit, making it ideal for high-precision positioning.[Features]・ In addition to the standard specifications, the manufacturer will semi-order 5 highly requested customs, and will promptly procure and ship after ordering.[5 custom made]・ Dowel holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products.・ Positioning Metal Bolt: Install the positioning metal bolts for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor.・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover.・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance.・ AFF grease for clean environment: Encloses clean environment-friendly grease (THK, AFF grease) to suppress dust generation.[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  26	Standard Grade	2 ～ 6	Long 1 pc. / Long 2 pcs.	Straight / Folded	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	47.4 ～ 64	Standard / Low Particle Generation	8	Not Provided	31 ～ 62	Not Provided	Not Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Actuator KR30H

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  30	Standard Grade	6 ～ 10	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Straight / Folded	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	39.5 ～ 74.4	Standard / Low Particle Generation	10	Not Provided	38 ～ 80	Not Provided	Not Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR20

  THK

  A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.It has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  20	Standard Grade	1 ～ 6	Long 1 pc. / Long 2 pcs.	-	Main Body	-	Not Provided (Installed by customers)	-	Standard	6	Not Provided	-	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Axis Actuators LS10 [C-Value - Driven by Ball Screw]

  MISUMI

  Single Axis Actuators enabling medium accuracy transferring/positioning operations economically.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  -	Standard Grade	2 ～ 4	Long 1 pc.	Straight	Main Body	Provided	Not Provided (Installed by customers)	50	Standard	10	Not Provided	62	Not Provided	Not Provided

  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Quick Delivery Actuator SKR26

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  26	Standard Grade	2 ～ 6	Long 1 pc. / Long 2 pcs.	Straight / Folded	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	47.4 ～ 64.2	Standard / Low Particle Generation	8	Not Provided	31 ～ 62	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator SKR20

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  20	Standard Grade	1 ～ 6	Long 1 pc. / Long 2 pcs.	Straight / Folded	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	33.2 ～ 46	Standard / Low Particle Generation	6	Not Provided	23 ～ 52	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR33

  THK

  A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.It has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  33	Standard Grade	6 ～ 10	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	-	Main Body	-	Not Provided (Installed by customers)	-	Standard	10	Not Provided	-	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 20 Day(s) or more

  20 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Axis Actuators LS12 [C-Value - Driven by Ball Screw]

  MISUMI

  Single Axis Actuators enabling medium accuracy level transferring/positioning operations economically.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  -	Standard Grade	5 ～ 10	Long 1 pc.	Straight	Main Body	Provided	Not Provided (Installed by customers)	50	Standard	12	Not Provided	80	Not Provided	Not Provided

  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Compact Series SKR20

  THK

  A compact, high-rigidity and high-precision actuator with an integrated inner block consisting of an LM block and ball screw nut.In addition, as the housing A/B serves as a support unit and the inner block serves as a table, it is possible to dramatically reduce the steps in designing and assembling.[Features] · Arranged to make contact at an angle of 45° such that the load is equal in 4 directions, enabling use in various positions. · The linear guide is made of 4 rows of circular arced grooves for a highly rigid guide with no cracks. · Changes to friction resistance due to changes in load are suppressed as far as possible, promoting high-accuracy feeding. · The U-shaped cross-sectional outer rail improves rigidity against moment and torsion.[Effects of Using Ball Retainer] · The grease retention capacity has been improved, allowing long-term maintenance-free operation. (QZ Lubricator is attached to the ball screw.) · Eliminates mutual friction between balls, reduces torque fluctuation and achieves excellent sliding performance. · In addition, since the basic dynamic load rating of the LM guide and ball screw is higher than conventional products, it has a long service life.

  CAD ：

  2D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  20	Standard Grade	1	Long 1 pc. / Long 2 pcs.	Straight	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	33.2	Standard	6	Not Provided	52	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator SKR26

  THK

  A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, since the housing A/B doubles as a support unit, and the inner block doubles as a table, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.[Effect of adopting ball retainer]·Due to the improved grease holding capacity, long-term maintenance-free operation has been achieved. (Lubricator QZ is attached to the ball screw section)・ Excellent sliding performance can be obtained due to elimination of mutual friction between balls and reduced torque fluctuation.・ In addition, the basic dynamic load rating of the LM guide and ball thread section is larger than before, so it has a long lifespan.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  26	Standard Grade	2 ～ 6	Long 2 pcs.	-	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	-	Standard	8	Not Provided	-	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR30H

  THK

  A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table. Therefore, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  30	Standard Grade	6 ～ 10	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	-	Main Body	-	Not Provided (Installed by customers)	-	Standard	10	Not Provided	-	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Quick Actuator KR20

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  20	Standard Grade	1 ～ 6	Long 1 pc. / Long 2 pcs.	Straight / Folded	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	33.2 ～ 46	Standard / Low Particle Generation	6	Not Provided	23 ～ 52	Not Provided	Not Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR26

  THK

  A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.It has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  26	Standard Grade	2 ～ 6	Long 1 pc. / Long 2 pcs.	-	Main Body	-	Not Provided (Installed by customers)	-	Standard	8	Not Provided	-	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Nominal (Height)
Accuracy
Lead(mm)
Table
Motor Mounting Orientation
Main Body, Peripheral Components
Cover
With or w/o Motors
Table Length L1(mm)
Grease
Ball Screw Shaft Dia.(Ø)
With or w/o Lubricant Unit
Table Width W1(mm)
Amplifier Voltage
With or w/o Retainer

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI MiSUMi Economy	MISUMI MiSUMi Economy	MISUMI MiSUMi Economy	MISUMI MiSUMi Economy	HIWIN	HIWIN	HIWIN	MISUMI	THK	THK	THK	THK	THK	THK	THK	THK	MISUMI	THK	THK	THK	MISUMI	THK	THK	THK	THK	THK
Product SeriesDòng sản phẩm	Single Axis Actuators KS86 Standard/KSC86 With Cover	Single Axis Actuators KS60 Standard/KSC60 With Cover	Single Axis Actuators KS50 Standard/KSC50 With Cover	Single Axis Actuators KS40 Standard/KSC40 With Cover	Single Axis Robot KK86 Type (Mounting Surface Height: 46, Width: 86)	Single Axis Robot KK60 Type (Mounting Surface Height: 33, Width: 60)	Single Axis Robot KK50 Type (Mounting Surface Height: 26, Width: 50)	Single Axis Actuators LST10 [C-Value - Driven by Belt]	Actuator SKR33	Actuator KR45H	Actuator SKR33	Actuator KR45H	Actuator KR46	Actuator KR26	Actuator KR30H	Actuator KR20	Single Axis Actuators LS10 [C-Value - Driven by Ball Screw]	Quick Delivery Actuator SKR26	Actuator SKR20	Actuator KR33	Single Axis Actuators LS12 [C-Value - Driven by Ball Screw]	Compact Series SKR20	Actuator SKR26	Actuator KR30H	Quick Actuator KR20	Actuator KR26
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From					21,069,980 VND	16,213,441 VND	13,500,265 VND
Days to ShipSố ngày giao hàng	8 Day(s) or more	Same day or more	Same day or more	Same day or more	23 Day(s) or more	22 Day(s) or more	23 Day(s) or more	12 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	20 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	11 Day(s) or more	23 Day(s) or more	23 Day(s) or more	20 Day(s) or more	12 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more
SpecificationsĐặc điểm kĩ thuật
Nominal (Height)	68 / 46	48 / 33	26 / 40	32 / 20	46	33	26	-	33	45	33	45	46	26	30	20	-	26	20	33	-	20	26	30	20	26
Accuracy	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade
Lead(mm)	10 ～ 20	5 ～ 10	2 ～ 10	1 ～ 6	10 ～ 20	5 ～ 10	2	-	6 ～ 20	10 ～ 20	6 ～ 20	10 ～ 20	10 ～ 20	2 ～ 6	6 ～ 10	1 ～ 6	2 ～ 4	2 ～ 6	1 ～ 6	6 ～ 10	5 ～ 10	1	2 ～ 6	6 ～ 10	1 ～ 6	2 ～ 6
Table	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Short 1 pcs	Long 1 pc. / Short 1 pcs	Long 1 pc.	Long 1 pc.	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs.	Long 1 pc.	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc.	Long 1 pc. / Long 2 pcs.	Long 2 pcs.	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs.
Motor Mounting Orientation	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Folded	Straight / Folded	Straight / Folded	-	-	-	Straight / Folded	Straight / Folded	-	Straight	Straight / Folded	Straight / Folded	-	Straight	Straight	-	-	Straight / Folded	-
Main Body, Peripheral Components	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body
Cover	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	Not Provided	Not Provided	Not Provided	Provided	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	-	-	Not Provided / Provided	Not Provided / Provided	-	Provided	Not Provided / Provided	Not Provided / Provided	-	Provided	Not Provided / Provided	Not Provided / Provided	-	Not Provided / Provided	-
With or w/o Motors	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)
Table Length L1(mm)	75	51	47	33	43 ～ 75	28 ～ 51	47	50	39.5 ～ 76	43.5 ～ 108	-	-	-	47.4 ～ 64	39.5 ～ 74.4	-	50	47.4 ～ 64.2	33.2 ～ 46	-	50	33.2	-	-	33.2 ～ 46	-
Grease	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard	Standard	Standard	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard	Standard	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard	Standard	Standard	Standard	Standard	Standard / Low Particle Generation	Standard
Ball Screw Shaft Dia.(Ø)	15	12	8	8	15	12	8	-	13	15	13	15	15	8	10	6	10	8	6	10	12	6	8	10	6	8
With or w/o Lubricant Unit	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Table Width W1(mm)	60 ～ 112	42 ～ 86	35 ～ 62	26 ～ 52	60	42	35	62	37.4 ～ 86	53 ～ 104	-	-	-	31 ～ 62	38 ～ 80	-	62	31 ～ 62	23 ～ 52	-	80	52	-	-	23 ～ 52	-
Amplifier Voltage	-	-	-	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
With or w/o Retainer	-	-	-	-	Not Provided	Not Provided	Not Provided	Not Provided	Provided	Not Provided	Provided	Provided	Provided	Not Provided	Not Provided	Provided	Not Provided	Provided	Provided	Provided	Not Provided	Provided	Provided	Provided	Not Provided	Provided

Loading...Tải…