THK Single Axis Actuators（Table：Short 1 pcs）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR46

  THK

  A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.It has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  46	Standard Grade / High Grade / Precision Grade	10 ～ 20	Short 1 pcs	-	Main Body	-	Not Provided (Installed by customers)	-	Standard	15	Not Provided	-	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 20 Day(s) or more

  20 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Actuator KR45H

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  45	Standard Grade	10 ～ 20	Short 1 pcs	Straight / Folded	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	43.5 ～ 70.5	Standard / Low Particle Generation	15	Not Provided	53 ～ 104	Not Provided	Not Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator SKR33

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  33	Standard Grade	6 ～ 10	Short 1 pcs	Straight / Folded	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	39.5 ～ 50.5	Standard / Low Particle Generation	13	Not Provided	37.4 ～ 86	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator SKR33

  THK

  A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table. Therefore, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.[Effect of adopting ball retainer]·Due to the improved grease holding capacity, long-term maintenance-free operation has been achieved. (Lubricator QZ is attached to the ball screw section)・ Excellent sliding performance can be obtained due to elimination of mutual friction between balls and reduced torque fluctuation.・ In addition, the basic dynamic load rating of the LM guide and ball thread section is larger than before, so it has a long lifespan.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  33	Standard Grade / High Grade / Precision Grade	6 ～ 10	Short 1 pcs	-	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	-	Standard	13	Not Provided	-	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR45H

  THK

  A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, since the housing A/B doubles as a support unit, and the inner block doubles as a table, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  45	Standard Grade / High Grade / Precision Grade	10 ～ 20	Short 1 pcs	-	Main Body	-	Not Provided (Installed by customers)	-	Standard	15	Not Provided	-	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR33

  THK

  A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.It has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  33	Standard Grade / High Grade / Precision Grade	6 ～ 10	Short 1 pcs	-	Main Body	-	Not Provided (Installed by customers)	-	Standard	10	Not Provided	-	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 20 Day(s) or more

  20 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Actuator KR30H

  THK

  With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.[Features][5 custom made]・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation[Selection of sensors and sensor rails]・ Please refer to the selection list on the "Product Information" tab

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  30	Standard Grade	6 ～ 10	Short 1 pcs	Straight / Folded	Main Body	Not Provided / Provided	Not Provided (Installed by customers)	39.5 ～ 48.9	Standard / Low Particle Generation	10	Not Provided	38 ～ 80	Not Provided	Not Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Actuator KR30H

  THK

  A compact, high stiffness, and high precision actuator with an integrated inner block consisting of an LM block and a ball screw nut.Also, the housing A/B doubles as a support unit, and the inner block doubles as a table. Therefore, it has become possible to significantly reduce design and assembly labor-hours.[Features]・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.・ Changes in frictional resistance due to load fluctuations are minimized and follow high precision feed.・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.

  CAD ：

  2D / 3D

  Nominal (Height)	Accuracy	Lead(mm)	Table	Motor Mounting Orientation	Main Body, Peripheral Components	Cover	With or w/o Motors	Table Length L1(mm)	Grease	Ball Screw Shaft Dia.(Ø)	With or w/o Lubricant Unit	Table Width W1(mm)	Amplifier Voltage	With or w/o Retainer
  30	Standard Grade / High Grade / Precision Grade	10	Short 1 pcs	-	Main Body	-	Not Provided (Installed by customers)	-	Standard	10	Not Provided	-	Not Provided	Provided

  Days to Ship: Số ngày giao hàng: 23 Day(s) or more

  23 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Nominal (Height)
Accuracy
Lead(mm)
Table
Motor Mounting Orientation
Main Body, Peripheral Components
Cover
With or w/o Motors
Table Length L1(mm)
Grease
Ball Screw Shaft Dia.(Ø)
With or w/o Lubricant Unit
Table Width W1(mm)
Amplifier Voltage
With or w/o Retainer

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	THK	THK	THK	THK	THK	THK	THK	THK
Product SeriesDòng sản phẩm	Actuator KR46	Actuator KR45H	Actuator SKR33	Actuator SKR33	Actuator KR45H	Actuator KR33	Actuator KR30H	Actuator KR30H
CADCAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	-	-	-	-	-	-	-	-
Days to ShipSố ngày giao hàng	20 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	20 Day(s) or more	23 Day(s) or more	23 Day(s) or more
Nominal (Height)	46	45	33	33	45	33	30	30
Accuracy	Standard Grade / High Grade / Precision Grade	Standard Grade	Standard Grade	Standard Grade / High Grade / Precision Grade	Standard Grade / High Grade / Precision Grade	Standard Grade / High Grade / Precision Grade	Standard Grade	Standard Grade / High Grade / Precision Grade
Lead(mm)	10 ～ 20	10 ～ 20	6 ～ 10	6 ～ 10	10 ～ 20	6 ～ 10	6 ～ 10	10
Table	Short 1 pcs	Short 1 pcs	Short 1 pcs	Short 1 pcs	Short 1 pcs	Short 1 pcs	Short 1 pcs	Short 1 pcs
Motor Mounting Orientation	-	Straight / Folded	Straight / Folded	-	-	-	Straight / Folded	-
Main Body, Peripheral Components	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body
Cover	-	Not Provided / Provided	Not Provided / Provided	Not Provided / Provided	-	-	Not Provided / Provided	-
With or w/o Motors	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)
Table Length L1(mm)	-	43.5 ～ 70.5	39.5 ～ 50.5	-	-	-	39.5 ～ 48.9	-
Grease	Standard	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard	Standard	Standard	Standard / Low Particle Generation	Standard
Ball Screw Shaft Dia.(Ø)	15	15	13	13	15	10	10	10
With or w/o Lubricant Unit	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Table Width W1(mm)	-	53 ～ 104	37.4 ～ 86	-	-	-	38 ～ 80	-
Amplifier Voltage	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
With or w/o Retainer	Provided	Not Provided	Provided	Provided	Provided	Provided	Not Provided	Provided

Loading...Tải…