(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:00 2/3 to 5:00 (ICT) 3/3/2025. We apologize for the inconvenience.
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more.
SOKUHANSHA Plug Gauges / Screw Gauges
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
20 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Limit Thread Plug Gauge JIS B0251 and 0252 (Annex)
SOKUHANSHA
[Features]· The gauge classifications for screw limit gauge are determined with the same grades as the screws to be measured.· This gauge is called a limit thread gauge since it uses the upper limit and lower limit of the predetermined dimension accuracy of the screw part using 2 screws with different dimensions, through and blind, for inspection.· For the usage method, a gauge is considered to have passed the grade inspection when the screw thread limit gauge's go gauge can pass through without difficulty and the no-go gauge cannot be screwed in by more than two rotations.· In addition to mass-producing limit screw gauges according to JIS standards, the manufacturer can also design and manufacture screw gauges to conform with any standard.
Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge 1.4 ～ 60 0.25 ～ 3.5 Female Thread Class 2 JIS Standard From: 2,367,913 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more 
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SOKUHANSHA
Thread gauge used for testing unified threads (coarse).2 types are available, one for testing and the other for work.
Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge 0.073-Inch models ～ 2 inches Ridge 4.5 ～ Ridge 64 Female Thread 2B - From: 3,016,558 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Limit Thread Ring Gauge JIS B0251 and 0252 (Annex)
SOKUHANSHA
[Features]· The gauge classifications for screw limit gauge are determined with the same grades as the screws to be measured.· This gauge is called a limit thread gauge since it uses the upper limit and lower limit of the predetermined dimension accuracy of the screw part using 2 screws with different dimensions, through and blind, for inspection.· For the usage method, a gauge is considered to have passed the grade inspection when the screw thread limit gauge's go gauge can pass through without difficulty and the no-go gauge cannot be screwed in by more than two rotations.· In addition to mass-producing limit screw gauges according to JIS standards, the manufacturer can also design and manufacture screw gauges to conform with any standard.
Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge 1.4 ～ 58 0.25 ～ 3.5 Male thread Class 2 JIS Standard From: 4,553,801 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SOKUHANSHA
[Features]· The limit plain gauge is a gauge that has one measuring surface based on the maximum actual hole size and another measuring surface based on the minimum actual hole size.■ Through Side Plug Gauge· This gauge is for inspection of whether the diameter of the hole is larger than the regulated largest object size, and must be able to pass easily through the full length of the hole.■ Blind Plug Gauge· This gauge is for inspection of whether the diameter of the hole is smaller than the regulated smallest object size, and must not enter the hole.
Product Type Nominal Pitch P Workpiece Class Standard Limit Plug Gauge 2 ～ 50 - - H7 - From: 1,597,368 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SOKUHANSHA
Thread gauge is used to testing unified threads (fine thread), and confirms accuracy by managing limit of product thread with "go/no-go."
Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge 0.25-Inch models ～ 1.5 inches Ridge 12 ～ Ridge 28 Female Thread 2B - From: 3,045,498 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Limit Screw Plug Gauges, ISO Method JISB0251/0252
SOKUHANSHA
[Features]· Uses the limit system, the most common method for parallel screw gauges, in which the accuracy is guaranteed by managing the limit of the product screws for through/blind.· There are two basic limit types: the ISO classification gauge type and the conventional JIS classification gauge type.· The conventional JIS gauge system distinguished inspection and machining on the gauge no-go side, but the ISO gauge system is simplified, removing this distinction.· Scissors-type gauge for exterior use is the same.
Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge 1.6 ～ 20 0.35 ～ 2.5 Female Thread 6H - From: 2,416,503 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Parallel Pipe Thread Limit Plug Gauge (G)
SOKUHANSHA
[Features]· A screw gauge used for inspection of screws (G) primarily for mechanical connections that do not require sealing, newly created by JIS after introduction of the ISO gauge standard.
Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge 1 ～ 7/8 Ridge 11 ～ Ridge 28 Female Thread - - From: 4,586,516 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tapered Pipe Thread Plug Gauge (PT)
SOKUHANSHA
A gauge used for inspecting screws (PT) whose main purpose is mechanical connection where sealing is not necessary, for the connection of pipes, parts for pipes, fluidic devices, etc.
Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge 1 ～ 3/8 Ridge 11 ～ Ridge 28 Female Thread - - From: 4,342,387 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tapered Pipe Thread Plug Gauge
SOKUHANSHA
[Features]· A tapered screw gauge used for inspection of screws (R, Rc, Rp) primarily for mechanical connections that require sealing, newly established by JIS after introduction of the ISO gauge standard.· The R and PT product screws are identical in terms of their dimensions, but the gauge systems used are different.· If the pipe or pipe fitting end are within the range of the gauge notch length, it will pass.· The difference from the conventional pipe taper thread gauge PT is as follows.· Wear limit of tapered thread ring gauge: Wear limit has been regulated for the tapered thread ring gauge.· Inspection plug: Wear limit is inspected with the inspection plug for tapered screws (CP).
Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge 1 ～ 3/8 Ridge 11 ～ Ridge 28 Female Thread - - From: 5,579,456 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tapered Pipe Thread Gauge (PT)
SOKUHANSHA
A gauge used for inspecting screws (PT) whose main purpose is mechanical connection where sealing is required, for the connection of pipes, parts for pipes, fluidic devices, etc.
Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge / Thread Plug Gauge 1 ～ 4 Ridge 11 ～ Ridge 28 Female Thread/Male Screw Set - - From: 11,497,928 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SOKUHANSHA
Thread gauge used for testing unified threads (coarse).2 types are available, one for testing and the other for work.Hardness is HRC58 to 62.
Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge 0.073-Inch models ～ 1.5-Inch models Ridge 12 ～ Ridge 72 Male thread 2A - From: 5,931,743 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Limit Screw Ring Gauges, ISO Method JISB0251/0252
SOKUHANSHA
[Features]· Uses the limit system, the most common method for parallel screw gauges, in which the accuracy is guaranteed by managing the limit of the product screws for through/blind.· There are two basic limit types: the ISO classification gauge type and the conventional JIS classification gauge type.· The conventional JIS gauge system distinguished inspection and machining on the gauge no-go side, but the ISO gauge system is simplified, removing this distinction.· Scissors-type gauge for exterior use is the same.
Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge 1.4 ～ 20 0.3 ～ 2.5 Male thread 6g ～ 6h - From: 5,303,066 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Parallel Pipe Thread Limit Ring Gauge (G)
SOKUHANSHA
[Features]· A screw gauge used for inspection of screws (G) primarily for mechanical connections that do not require sealing, newly created by JIS after introduction of the ISO gauge standard.
Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge 1 ～ 7/8 Ridge 11 ～ Ridge 28 Male thread - - From: 8,831,725 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Parallel Pipe Thread Limit Ring Gauge (PF)
SOKUHANSHA
[Features]· A screw gauge used for inspection of screws (G) primarily for mechanical connections that do not require sealing, newly created by JIS after introduction of the ISO gauge standard.· The difference from the conventional pipe parallel thread gauge PF is as follows.· Classification y/n.· A screw gauge grade for female screws is not available.· Male thread gauges are classified as Grade A or Grade B.· Note that GR is for both Grade A and Grade B.· The distinction between use for inspection and use for manufacturing has been eliminated for both through and blind sides.· Determination of pass/fail for thread ring gauge.
Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge 1 ～ 7/8 Ridge 11 ～ Ridge 28 Male thread - - From: 8,235,765 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tapered Pipe Thread Ring Gauge
SOKUHANSHA
[Features]· A tapered screw gauge used for inspection of screws (R, Rc, Rp) primarily for mechanical connections that require sealing, newly established by JIS after introduction of the ISO gauge standard.· The R and PT product screws are identical in terms of their dimensions, but the gauge systems used are different.· If the pipe or pipe fitting end are within the range of the gauge notch length, it will pass.· The difference from the conventional pipe taper thread gauge PT is as follows.· Wear limit of tapered thread ring gauge: Wear limit has been regulated for the tapered thread ring gauge.· Inspection plug: Wear limit is inspected with the inspection plug for tapered screws (CP).
Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge 1 ～ 3/8 Ridge 11 ～ Ridge 28 Male thread - - From: 8,413,475 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tapered Pipe Thread Ring Gauge (PT)
SOKUHANSHA
A gauge used for inspecting screws (PT) whose main purpose is mechanical connection where sealing is not necessary, for the connection of pipes, parts for pipes, fluidic devices, etc.
Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge 1 ～ 3/8 Ridge 11 ～ Ridge 28 Male thread - - From: 7,048,115 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tapered Pipe Thread Gauge (NPT)
SOKUHANSHA
[Features]· American standard (ANSI) pipe taper thread gauge used for inspecting pipe taper threads (NPT) for general components requiring sealing.· These gauges come with various notching; however, the one most commonly used has notches in 3 locations: minimum position, reference position and maximum position.· When a gauge is screwed in by hand to a pipe taper screw, if the pipe end is within the range of the maximum limit position and minimum limit position notch, it will pass.· For NPT, the height of the ridge cutout for the screw outer and inner diameters are regulated; using an NPT plane taper gauge for this inspection is recommended.· Dimensional inspection of outer or inner diameter can be easily performed by aligning the three notches on the taper thread gauge and the six notches on the plain taper gauge.
Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge / Thread Plug Gauge 1 ～ 4 Ridge 8 ～ Ridge 27 Female Thread/Male Screw Set - - From: 17,165,391 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Parallel Pipe Thread Limit Plug Gauge (PF)
SOKUHANSHA
[Features]· A screw gauge used for inspection of screws (G) primarily for mechanical connections that do not require sealing, newly created by JIS after introduction of the ISO gauge standard.· The difference from the conventional pipe parallel thread gauge PF is as follows.· Classification y/n.· A screw gauge grade for female screws is not available.· Male thread gauges are classified as Grade A or Grade B.· Note that GR is for both Grade A and Grade B.· The distinction between use for inspection and use for manufacturing has been eliminated for both through and blind sides.· Determination of pass/fail for thread ring gauge.
Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge 1 ～ 7/8 Ridge 11 ～ Ridge 28 Female Thread - - From: 4,167,970 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SOKUHANSHA
[Features]· A tapered screw gauge used for inspection of screws (R, Rc, Rp) primarily for mechanical connections that require sealing, newly established by JIS after introduction of the ISO gauge standard.· The R and PT product screws are identical in terms of their dimensions, but the gauge systems used are different.· If the pipe or pipe fitting end are within the range of the gauge notch length, it will pass.· The difference from the conventional pipe taper thread gauge PT is as follows.· Wear limit of tapered thread ring gauge: Wear limit has been regulated for the tapered thread ring gauge.· Inspection plug: Wear limit is inspected with the inspection plug for tapered screws (CP).
Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge / Thread Plug Gauge 1 ～ 3/8 Ridge 11 ～ Ridge 28 Female Thread/Male Screw Set - - From: 13,751,790 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SOKUHANSHA
A screw gauge used for inspecting unified screw threads (coarse).
Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge 0.073-Inch models ～ 2 inches Ridge 4.5 ～ Ridge 64 Male thread 2A - From: 5,931,743 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Product Type |
| Nominal |
| Pitch P |
| Workpiece |
| Class |
| Standard |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA |
| Product SeriesDòng sản phẩm | ||||||||||||||||||||
| From | 2,367,913 VND- | 3,016,558 VND- | 4,553,801 VND- | 1,597,368 VND- | 3,045,498 VND- | 2,416,503 VND- | 4,586,516 VND- | 4,342,387 VND- | 5,579,456 VND- | 11,497,928 VND- | 5,931,743 VND- | 5,303,066 VND- | 8,831,725 VND- | 8,235,765 VND- | 8,413,475 VND- | 7,048,115 VND- | 17,165,391 VND- | 4,167,970 VND- | 13,751,790 VND- | 5,931,743 VND- |
| Days to ShipSố ngày giao hàng | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Product Type | Thread Plug Gauge | Thread Plug Gauge | Thread ring gauge | Limit Plug Gauge | Thread Plug Gauge | Thread Plug Gauge | Thread Plug Gauge | Thread Plug Gauge | Thread Plug Gauge | Thread ring gauge / Thread Plug Gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge / Thread Plug Gauge | Thread Plug Gauge | Thread ring gauge / Thread Plug Gauge | Thread ring gauge |
| Nominal | 1.4 ～ 60 | 0.073-Inch models ～ 2 inches | 1.4 ～ 58 | 2 ～ 50 | 0.25-Inch models ～ 1.5 inches | 1.6 ～ 20 | 1 ～ 7/8 | 1 ～ 3/8 | 1 ～ 3/8 | 1 ～ 4 | 0.073-Inch models ～ 1.5-Inch models | 1.4 ～ 20 | 1 ～ 7/8 | 1 ～ 7/8 | 1 ～ 3/8 | 1 ～ 3/8 | 1 ～ 4 | 1 ～ 7/8 | 1 ～ 3/8 | 0.073-Inch models ～ 2 inches |
| Pitch P | 0.25 ～ 3.5 | Ridge 4.5 ～ Ridge 64 | 0.25 ～ 3.5 | - | Ridge 12 ～ Ridge 28 | 0.35 ～ 2.5 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | Ridge 12 ～ Ridge 72 | 0.3 ～ 2.5 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | Ridge 8 ～ Ridge 27 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | Ridge 4.5 ～ Ridge 64 |
| Workpiece | Female Thread | Female Thread | Male thread | - | Female Thread | Female Thread | Female Thread | Female Thread | Female Thread | Female Thread/Male Screw Set | Male thread | Male thread | Male thread | Male thread | Male thread | Male thread | Female Thread/Male Screw Set | Female Thread | Female Thread/Male Screw Set | Male thread |
| Class | Class 2 | 2B | Class 2 | H7 | 2B | 6H | - | - | - | - | 2A | 6g ～ 6h | - | - | - | - | - | - | - | 2A |
| Standard | JIS Standard | - | JIS Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Product Type
- Thread ring gauge
- Thread Plug Gauge
- Limit Plug Gauge
- Thread Pin Gauge
-
Nominal
- NO0-80UNF
- 0.073-Inch models
- 0.086-Inch models
- 0.099-Inch models
- No.10-32UNF
- No.10-24UNC
- 0.112-Inch models
- 0.1155
- No.12-28UNF
- No.12-24UNC
- 0.125-Inch models
- 0.138-Inch models
- 0.164-Inch models
- 0.19-Inch models
- 0.216-Inch models
- 0.25-Inch models
- 0.3125-Inch models
- 0.375-Inch models
- No.4-40UNC
- 0.4375-Inch models
- 0.5-Inch models
- No.5-40UNC
- 0.5625-Inch models
- No.6-40UNF
- No.6-32UNC
- 0.625-Inch models
- 0.6875-Inch models
- No.8-36UNF
- No.8-32UNC
- 0.875-Inch models
- 1
- 1-Inch models
- 1
- 1 inch
- M1
- NO1-72UNF
- NO1-64UNC
- 1-14UNS
- 1-12UNF
- G1-11
- PF1-11
- PS1-11
- PT1-11
- R1-11
- 1-11-1/2NPT
- 1-11-1/2NPTF
- 1-8UNC
- W1-8
- W1-8-L
- W1-7/8-4-1/2
- 1-5/8-8UN
- W1-5/8-5
- 1-5/16-12UN
- PF1-3/4-11
- PS1-3/4-11
- PT1-3/4-11
- 1-3/4-8UN
- 1-3/4-5UNC
- W1-3/4-5
- 1-3/8-12UNF
- 1-3/8-8UN
- 1-3/8-6UNC
- W1-3/8-6
- 1-3/16-12UN
- 1-1/2-12UNF
- G1-1/2-11
- PF1-1/2-11
- PS1-1/2-11
- PT1-1/2-11
- R1-1/2-11
- 1-1/2-11-1/2NPT
- 1-1/2-11-1/2NPTF
- 1-1/2-8UN
- 1-1/2-6UNC
- W1-1/2-6
- 1-1/4-12UNF
- G1-1/4-11
- PF1-1/4-11
- PS1-1/4-11
- PT1-1/4-11
- R1-1/4-11
- 1-1/4-11-1/2NPT
- 1-1/4-11-1/2NPTF
- 1-1/4-8UN
- 1-1/4-7UNC
- W1-1/4-7
- 1-1/8-12UNF
- PF1-1/8-11
- PS1-1/8-11
- 1-1/8-8UN
- 1-1/8-7UNC
- W1-1/8-7
- 1-1/16-12UN
- M1X0.2
- M1X0.25
- 1 1/2
- 1 1/4
- 1 1/8
- 1/2
- 1/2-32UN
- 1/2-20UNF
- 1/2-14NPT
- 1/2-14NPTF
- G1/2-14
- PF1/2-14
- PS1/2-14
- PT1/2-14
- R1/2-14
- 1/2-13UNC
- W1/2-12
- W1/2-12-L
- 1 3/4
- 1/4
- SM1/4-40
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- W1/4-20
- W1/4-20-L
- G1/4-19
- PF1/4-19
- PS1/4-19
- PT1/4-19
- R1/4-19
- 1/4-18NPT
- 1/4-18NPTF
- 1/8
- SM1/8-44
- SM1/8-40
- W1/8-40
- G1/8-28
- PF1/8-28
- PS1/8-28
- PT1/8-28
- R1/8-28
- 1/8-27NPT
- 1/8-27NPTF
- W1/16-60
- PT1/16-28
- R1/16-28
- 1/16-27NPT
- 1/16-27NPTF
- M1.1X0.2
- M1.1X0.25
- 1.125-Inch models
- M1.2X0.2
- M1.2X0.25
- 1.25-Inch models
- 1.375-Inch models
- 1.4
- M1.4
- M1.4X0.2
- M1.4X0.3
- M1.4X0.3-L
- 1.5-Inch models
- 1.5 inches
- 1.6
- M1.6X0.2
- M1.6X0.35
- 1.7
- M1.7X0.2
- M1.7X0.35
- M1.7X0.35-L
- 1.75-Inch models
- 1.8
- M1.8X0.2
- M1.8X0.35
- 2
- 2
- 2 inches
- M2
- NO2-64UNF
- NO2-56UNC
- G2-11
- PF2-11
- PS2-11
- PT2-11
- R2-11
- 2-11-1/2NPT
- 2-11-1/2NPTF
- 2-8UN
- 2-4-1/2UNC
- W2-4-1/2
- PF2-1/2-11
- PS2-1/2-11
- PT2-1/2-11
- 2-1/2-8NPT
- 2-1/2-8UN
- PF2-1/4-11
- PS2-1/4-11
- M2X0.25
- M2X0.4
- M2X0.4-L
- 2 1/2
- 2 1/4
- 2 3/4
- 2.2
- M2.2X0.25
- M2.2X0.45
- 2.3
- M2.3
- M2.3X0.25
- M2.3X0.4
- 2.5
- M2.5
- M2.5X0.35
- M2.5X0.45
- M2.5X0.45-L
- 2.6
- M2.6
- M2.6X0.35
- M2.6X0.45
- M2.6X0.45-L
- 3
- 3
- M3
- φ3
- NO3-56UNF
- NO3-48UNC
- PF3-11
- PS3-11
- PT3-11
- 3-8NPT
- 3-8UN
- PF3-1/2-11
- PT3-1/2-11
- 3-1/2-8NPT
- 3-1/2-8UN
- M3X0.35
- M3X0.5
- M3X0.5-L
- M3X0.6
- M3X0.6-L
- 3 1/2
- 3/4
- 3/4-16UNF
- 3/4-14NPT
- 3/4-14NPTF
- G3/4-14
- PF3/4-14
- PS3/4-14
- PT3/4-14
- R3/4-14
- 3/4-10UNC
- W3/4-10
- W3/4-10-L
- 3/8
- 3/8-32UNEF
- 3/8-24UNF
- G3/8-19
- PF3/8-19
- PS3/8-19
- PT3/8-19
- R3/8-19
- 3/8-18NPT
- 3/8-18NPTF
- 3/8-16UNC
- W3/8-16
- W3/8-16-L
- SM3/16-32
- SM3/16-28
- W3/16-24
- SM3/32-56
- 3.5
- M3.5
- M3.5X0.35
- M3.5X0.6
- 4
- 4
- M4
- φ4
- NO4-48UNF
- NO4-40UNC
- PF4-11
- PT4-11
- 4-8NPT
- 4-8UN
- 4-3/4-8UN
- 4-1/2-8UN
- M4X0.5
- M4X0.7
- M4X0.7-L
- M4X0.75
- M4X0.75-L
- 4.5
- M4.5X0.5
- M4.5X0.75
- 5
- 5
- M5
- φ5
- NO5-44UNF
- NO5-40UNC
- PT5-11
- M5X0.5
- M5X0.75
- M5X0.8
- M5X0.8-L
- M5X0.9
- M5X0.9-L
- 5/8
- 5/8-24UNEF
- 5/8-18UNF
- G5/8-14
- PF5/8-14
- PS5/8-14
- PT5/8-14
- 5/8-11UNC
- W5/8-11
- W5/8-11-L
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- W5/16-18
- W5/16-18-L
- 5.5
- M5.5X0.5
- M5.5X0.75
- M5.5X0.9
- 6
- 6
- M6
- φ6
- NO6-40UNF
- NO6-32UNC
- M6X0.5
- M6X0.75
- M6X1
- M6X1.0
- M6X1-L
- 7
- 7
- M7
- φ7
- M7X0.5
- M7X0.75
- M7X1
- M7X1-L
- 7/8
- 7/8-14UNF
- G7/8-14
- PF7/8-14
- PS7/8-14
- PT7/8-14
- 7/8-9UNC
- W7/8-9
- W7/8-9-L
- 7/16-20UNF
- 7/16-14UNC
- W7/16-14
- 8
- 8
- M8
- φ8
- NO8-36UNF
- NO8-32UNC
- M8X0.5
- M8X0.75
- M8X1
- M8X1.25
- M8X1.25-L
- 9
- 9
- φ9
- M9X0.5
- M9X0.75
- M9X1
- M9X1.25
- M9X1.25-L
- 9/16-18UNF
- 9/16-12UNC
- W9/16-12
- SM9/64-40
- 10
- M10
- φ10
- NO10-32UNF
- NO10-24UNC
- M10X0.5
- M10X0.75
- M10X1
- M10X1.25
- M10X1.25-L
- M10X1.5
- M10X1.5-L
- 11
- φ11
- M11X0.5
- M11X0.75
- M11X1
- M11X1.25
- M11X1.5
- M11X1.5-L
- SM11/64-40
- 12
- M12
- φ12
- NO12-28UNF
- NO12-24UNC
- M12X0.5
- M12X0.75
- M12X1
- M12X1.25
- M12X1.25-L
- M12X1.5
- M12X1.5-L
- M12X1.75
- M12X1.75-L
- 13
- φ13
- M13X0.5
- M13X0.75
- M13X1
- M13X1.25
- M13X1.5
- M13X1.75
- 14
- M14
- φ14
- M14X0.5
- M14X0.75
- M14X1
- M14X1.25
- M14X1.25-L
- M14X1.5
- M14X1.5-L
- M14X2
- M14X2-L
- 15
- φ15
- M15X0.5
- M15X0.75
- M15X1
- M15X1.5
- M15X2
- SM15/64-28
- 16
- M16
- φ16
- M16X0.5
- M16X0.75
- M16X1
- M16X1.25
- M16X1.5
- M16X1.5-L
- M16X2
- M16X2-L
- 17
- φ17
- M17X0.75
- M17X1
- M17X1.5
- 18
- M18
- φ18
- M18X0.5
- M18X0.75
- M18X1
- M18X1.5
- M18X1.5-L
- M18X2
- M18X2.5
- M18X2.5-L
- 19
- φ19
- M19X1
- M19X1.5
- M19X2.5
- 20
- M20
- φ20
- M20X0.5
- M20X1
- M20X1.25
- M20X1.5
- M20X1.5-L
- M20X2
- M20X2.5
- M20X2.5-L
- 21
- φ21
- 22
- M22
- φ22
- M22X0.5
- M22X1
- M22X1.5
- M22X1.5-L
- M22X2
- M22X2.5
- M22X2.5-L
- 23
- φ23
- 24
- M24
- φ24
- M24X0.5
- M24X1
- M24X1.5
- M24X1.5-L
- M24X2
- M24X3
- M24X3-L
- 25
- φ25
- M25X0.5
- M25X1
- M25X1.5
- M25X2
- 26
- φ26
- M26X0.5
- M26X1
- M26X1.5
- M26X1.5-L
- M26X2
- M26X3
- 27
- M27
- φ 27
- M27X1
- M27X1.5
- M27X1.5-L
- M27X2
- M27X3
- M27X3-L
- 28
- φ28
- M28X0.5
- M28X1
- M28X1.25
- M28X1.5
- M28X1.5-L
- M28X2
- M28X3
- 29
- φ29
- 30
- M30
- φ30
- M30X0.5
- M30X1
- M30X1.5
- M30X1.5-L
- M30X2
- M30X3
- M30X3.5
- M30X3.5-L
- 31
- φ 31
- 32
- φ32
- M32X0.5
- M32X1
- M32X1.5
- M32X2
- M32X3
- 33
- M33
- φ33
- M33X1.5
- M33X2
- M33X3
- M33X3.5
- 34
- φ34
- M34X0.5
- M34X1
- M34X1.5
- M34X2
- 35
- φ35
- M35X1.5
- M35X3
- 36
- M36
- φ 36
- M36X0.5
- M36X1
- M36X1.5
- M36X2
- M36X3
- M36X4
- 37
- φ37
- 38
- φ38
- M38X0.5
- M38X1
- M38X1.5
- M38X2
- M38X3
- 39
- M39
- φ39
- M39X1.5
- M39X2
- M39X3
- M39X4
- 40
- φ40
- M40X1
- M40X1.5
- M40X2
- M40X3
- 41
- 42
- M42
- M42X1
- M42X1.5
- M42X2
- M42X3
- M42X4
- M42X4.5
- 43
- 44
- 45
- M45X1
- M45X1.5
- M45X2
- M45X3
- M45X4
- M45X4.5
- 46
- M46X1.5
- 47
- 48
- M48X1
- M48X1.5
- M48X2
- M48X3
- M48X4
- M48X5
- 49
- 50
- M50X1
- M50X1.5
- M50X2
- M50X3
- 52
- M52X1.5
- M52X2
- M52X3
- M52X4
- M52X5
- M54X4
- 55
- M55X1.5
- M55X2
- M55X3
- M55X4
- 56
- M56X1.5
- M56X2
- M56X3
- M56X4
- M56X5.5
- 58
- M58X1.5
- M58X2
- M58X3
- M58X4
- 60
- M60X1.5
- M60X2
- M60X3
- M60X4
- M60X5.5
- M62X1.5
- M62X2
- M62X3
- M62X4
- M64X1.5
- M64X2
- M64X3
- M64X4
- M64X6
- M65X1.5
- M65X2
- M65X3
- M65X4
- M68X1.5
- M68X2
- M68X3
- M68X4
- M68X6
- M70X1.5
- M70X2
- M70X3
- M70X4
- M70X6
- M72X1.5
- M72X2
- M72X3
- M72X4
- M72X6
- M75X1.5
- M75X2
- M75X3
- M75X4
- M76X1.5
- M76X2
- M76X3
- M76X4
- M76X6
- M78X2
- M80X1.5
- M80X2
- M80X3
- M80X6
- M82X2
- M85X1.5
- M85X2
- M85X3
- M85X4
- M90X1.5
- M90X2
- M90X3
- M90X4
- M90X6
- M95X1.5
- M95X2
- M95X3
- M95X4
- M95X6
- M100X1.5
- M100X2
- M100X3
- M100X4
- M100X6
- M105X2
- M105X6
- M110X2
- M110X3
- M115X2
- M115X4
- M120X2
- M120X3
- M125X2
- M125X4
- M130X2
- M130X3
- M130X6
-
Pitch P
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
- 1
- 1/2
- 1.25
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- Ridge 4.5
- 5
- Ridge 5
- 5.5
- 6
- Ridge 6
- Ridge 7
- Ridge 8
- 9
- Ridge 9
- 10
- Ridge 10
- 11
- Ridge 11
- 11-1/2
- Ridge 11 1/2
- 12
- Ridge 12
- 13
- Ridge 13
- 14
- Ridge 14
- 16
- Ridge 16
- 18
- Ridge 18
- 19
- Ridge 19
- 20
- Ridge 20
- 24
- Ridge 24
- 27
- Ridge 27
- 28
- Ridge 28
- 32
- Ridge 32
- 36
- Ridge 36
- 40
- Ridge 40
- 44
- Ridge 44
- 48
- Ridge 48
- 56
- Ridge 56
- 64
- Ridge 64
- Ridge 72
-
Workpiece
-
Class
-
Standard
- JIS Standard
- Other
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy