(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
OSG Carbide Ball End Mills（Type：Ball）
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
42 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute WXL-EBD
OSG
[Features]· High-accuracy ball end mill coated with WXL hard lubricating film coating. Proven performance on a wide range of work materials. Long life regardless of whether being used for dry-type or wet-type machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 10 0.2 ～ 38 - 4 ～ 20 2 40 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] -0.007 to 0.003 ～ ±0.01 Curved surface / Side / Engraving / R Groove For General Steels (AlCrN, etc.) Ball From: 483,333 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute MG-EBD-3
OSG
Uses high-toughness carbide with high transverse rupture strength.Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.05 ～ 1.5 0.2 ～ 8 - 3 2 40 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] - Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 1,773,426 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute CRN-EBD-3
OSG
A small diameter ball end mill series with a CrN coating for excellent lubricity. Ideal for fine processing of copper electrodes and IT parts.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 1.5 0.4 ～ 8 - 3 2 40 Aluminum[○] / Copper[◎] / Resin[◎] -0.01～+0.01 Curved surface / Side / Engraving / R Groove CrN Ball From: 1,913,688 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute for Graphite DG-EBD
OSG
[Features]・ Uses a dedicated graphite-only DG coating with excellent abrasion resistance.・ DG coating realizes low resistance with sharp cutting edge with little roundness. Controls chipping of the workpiece・ Seamless shape that improves the quality of shape machining・ An end mill with a diamond coating dedicated for graphite.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 2 ～ 6 8 ～ 60 - 4 ～ 12 2 80 ～ 200 Aluminum[○] / Graphite[◎] / Resin[◎] -0.01～+0.01 Curved surface / Side / Engraving / R Groove DG Ball From: 4,128,357 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 3-Flute FXS-PC-EBT
OSG
In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 2 ～ 12 20 ～ 85 6 ～ 16 3 70 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] -0.015～+0.015 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,013,153 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pencil-Neck Type, 3-Flute PHX-PC-DBT
OSG
Realizes high efficiency machining that will change the way you think about deep engraving. The unique spiral ball blade prevents vibration during deep-engraving and achieves stable high-feed cutting.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 6 1.5 ～ 18 6 ～ 160.8 6 ～ 20 3 60 ～ 220 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] - Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Ball From: 2,341,749 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 3-Flute PHX-DBT
OSG
Ball end mill with a new design that's given a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 10 1.5 ～ 30 - 6 ～ 20 3 60 ～ 200 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,107,382 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-SS-EBD
OSG
Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 6 12 ～ 22 - 5 ～ 11 2 120 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,783,385 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6
OSG
Super ultra-fine particle carbide alloy and high rigidity pencil neck achieves high speeds, high precision, and a super long life. Also eliminates chattering problems inherent in fine shape processing and carving.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 2 0.16 ～ 3.2 1 ～ 30 6 2 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] -0.005～+0.005 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,798,335 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-MG-EBD-3
OSG
A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.Coated for steelStandard/Alteration category: Manufacturer's standard productNumber of flutes (pcs.) 2Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)R Accuracy (µm) ±10
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 1.5 0.8 ～ 8 - 3 2 40 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,320,897 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute CBN-EBD
OSG
2-Flute Ball End Type CBN-EBD·Demonstrates high performance in machining high-rigid materials and cast iron·With a wide variety of lineup of CBN tools, you can select one of the best tool for your application.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 6 4 ～ 7 20 6 ～ 12 2 90 ～ 110 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 8,565,563 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute CBN-SXB
OSG
Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.2 ～ 1.5 0.3 ～ 1.8 1.2 ～ 6 4 ～ 6 2 45 ～ 50 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] -0.005～+0.005 Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 4,580,025 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute DIA-EBD
OSG
Allows both high-speed machining and dry cutting of aluminum. Also, great extension of tool life even in graphite processing has been achieved.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 6 2.5 ～ 22 - 4 ～ 12 2 60 ～ 140 Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] - Curved surface / Side / Engraving / R Groove Dia Coat Ball From: 4,128,357 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute DIA-EBD-SF
OSG
Demonstrates excellent durability when processing graphite, aluminum, etc.Work Material: Aluminum/Copper/GraphiteFor coating non-ferrous metals (Diamond coating)Standard/Alteration category: Manufacturer's standard productNumber of flutes (pcs.) 2Shank diameter (mm) 6
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 5 ～ 6 10 ～ 12 - 6 2 32 ～ 34 Aluminum[◎] / Copper[○] / Graphite[◎] - Curved surface / Side / Engraving / R Groove Dia Coat Ball From: 9,331,393 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute DLC-EBD
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Unique ultra-smooth DLC coating prevents welding. Achieves high speed in machining shapes such as aluminum alloys and provides a good finished surface.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 10 2.5 ～ 38 - 4 ～ 20 2 50 ～ 160 Aluminum[◎] / Copper[○] / Resin[◎] -0.01～+0.01 Curved surface / Side / Engraving / R Groove DLC Ball From: 2,145,423 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-MG-EBD
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A wide range of machining from general materials to hardened steel is possible. The manufacturer can also support high-speed machining centers.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 15 2.5 ～ 55 - 4 ～ 25 2 50 ～ 180 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,561,288 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute GX-EBD-SF
OSG
Carbide mushroom type ball end mill developed for shrink fitting.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 5 ～ 10 10 ～ 20 - 6 ～ 12 2 32 ～ 58 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove For General Steels (AlCrN, etc.) Ball From: 1,558,215 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
High toughness carbide alloy is used, providing a long service life at medium to low speeds
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 12.5 2.5 ～ 50 - 4 ～ 25 2 50 ～ 180 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] - Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 1,857,229 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG
A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.6 3 - 4 2 50 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 900,582 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute WXS-EBD
OSG
Ultra-heat-resistant, ultra-hard WX super coated high precision ball end mill. Ideal for high-speed direct engraving of hardened steel as well as, of course, high-speed general steel machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 8 1 ～ 24 2 ～ 10 4 ～ 16 2 50 ～ 140 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] -0.01～+0.01 ～ -0.005～+0.005 Curved surface / Side / Engraving / R Groove For High Hardness (Silicon Group) Ball From: 553,333 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute CRN-HS-EBD
OSG
Achieving high-speed and high-precision machining by combining shrink and HSKWork Material: Aluminum/Copper/ResinFor coating non-ferrous metals (CrN)Standard/Alteration category: Manufacturer's standard productNumber of flutes (pcs.) 2Helix angle: Standard helix (30 to 44°), R accuracy (µm) ±10
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 6 1 ～ 12 - 6 ～ 12 2 50 ～ 80 Aluminum[○] / Copper[◎] / Resin[◎] -0.01～+0.01 Curved surface / Side / Engraving / R Groove CrN Ball From: 2,407,650 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute WXL-HS-EBD
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.WXL coating with excellent lubricity and abrasion resistance. Can be used with a wide range of work materials and cutting applications
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 6 0.4 ～ 18 - 4 ～ 12 2 35 ～ 70 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] -0.007～+0.003 ～ -0.005～+0.005 Curved surface / Side / Engraving / R Groove For General Steels (AlCrN, etc.) Ball From: 469,924 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-EBD-6
OSG
High-precision ball end mill for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers. Super ultra-fine particle carbide base metal realizes long life for hardened steel high-speed machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 3 0.2 ～ 6 1.1 ～ 9 6 2 50 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.005～+0.005 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,451,322 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Ball Type, 2-Flute FX-LS-MG-EBD
OSG
The long shank allows machining in deep sections
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 15 2.5 ～ 55 - 3 ～ 25 2 70 ～ 280 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,430,076 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute for Heavy Cutting FX-HS-EBDS
OSG
A ball end mill for heavy cutting that supports high speed and high efficiency (large cutting depth). The short overall length is a perfect fit for shrink and HSK.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 6 1 ～ 12 2.5 ～ 30 6 ～ 12 2 50 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.015～+0.015 ～ -0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,407,650 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute WXE-HS-EBD
OSG
Ultra-high grade accuracy and precision ball end mill series for better craftsmanship. Short length that perfectly fits the HSK shrink holder. The product accuracy warranty sheet is included for HP3 specification types.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 4 8 16 8 2 60 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.003～+0.003 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,185,873 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute for Copper /Aluminum Alloy / Plastic CAP-EBD
OSG
Ball end mill for copper, aluminum alloy, and plastic. Highly sharp with good chip discharge.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 10 2.5 ～ 38 - 4 ～ 20 2 60 ～ 180 Aluminum[◎] / Copper[◎] / Resin[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 1,882,212 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-EBD
OSG
Ball end mill that enables dry cutting of copper and copper alloy thanks to the CrN coating and sharp blade shape.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 6 0.4 ～ 22 - 4 ～ 12 2 60 ～ 140 Aluminum[○] / Copper[◎] / Resin[◎] -0.01～+0.01 Curved surface / Side / Engraving / R Groove CrN Ball From: 2,407,650 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-HO-MG-EBD
OSG
The oil hole shows its true performance when drilling deep holes where chip discharge can be problematic.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 10 12 ～ 38 - 6 ～ 20 2 90 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,549,214 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FXS-HO-EBDS
OSG
A ball end mill for high hardness steel with a lubrication hole that maximizes the tool rigidity.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 10 6 ～ 20 - 6 ～ 20 2 90 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,716,032 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute DIA-PC-EBD
OSG
Pencil neck ball for ultra deep cutting of graphite electrodes. Ultra-fine crystal diamond coating realizes a dramatic extension of tool lifespan.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 3 2.5 ～ 12 30 ～ 150 6 ～ 12 3 100 ～ 220 Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] - Curved surface / Side / Engraving / R Groove Dia Coat Ball From: 9,089,821 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute FX-PC-MG-EBD
OSG
Due to the highly rigid pencil neck, good cutting is possible even with a large tool runout.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.3 ～ 6 0.6 ～ 22 10 ～ 80 6 ～ 16 2 60 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,101,874 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 2-Flute WXL-PC-EBD
OSG
[Features]· WXL coating with excellent lubrication and wear resistance. Can be used with a wide range of work materials and cutting applications
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.1 ～ 6 0.16 ～ 12 1 ～ 80 4 ～ 16 2 45 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] -0.005 to +0.005 ～ -0.005～+0.005 Curved surface / Side / Engraving / R Groove For General Steels (AlCrN, etc.) Ball From: 805,371 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Pencil-neck Type, 2-Flute FX-PCL-EBD
OSG
It is a ball end mill for deep cutting that cannot be reached with ordinary end mills.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 2 ～ 6 8 ～ 22 100 ～ 140 10 ～ 16 2 200 ～ 250 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 9,290,082 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Ball Type, 3-Flute FXS-LS-EBT
OSG
In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 3 ～ 10 12 ～ 38 - 6 ～ 20 3 140 ～ 250 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] -0.015～+0.015 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 3,454,985 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 3-Flute FXS-EBT
OSG
The ball shape is composed of 3 flutes to the center to enable high efficiency machining with a 50% increase in table feed.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 10 5 ～ 38 - 4 ～ 20 3 50 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] -0.015～+0.015 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,624,435 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball End Type, 4-Flute for Graphite DG-EBM
OSG
End mill with diamond coating dedicated for graphite.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 2 ～ 5 8 ～ 20 - 4 ～ 10 4 80 ～ 100 Aluminum[○] / Graphite[◎] / Resin[◎] -0.015～+0.015 Curved surface / Side / Engraving DG Ball From: 4,030,193 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
End Long Ball Type , 2-Flute for Graphite GF-EBDL
OSG
Carbide, which has extremely excellent abrasion resistance, is used as the base material, achieving a long lifespan in graphite machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 20 ～ 130 25 ～ 80 6 ～ 12 2 100 ～ 200 Graphite[◎] - Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 5,151,298 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball-End Type, 2-Flute for Graphite GF-EBDR
OSG
Carbide, which has extremely excellent abrasion resistance, is used as the base material, achieving a long lifespan in graphite machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 10 ～ 65 20 ～ 85 4 ～ 12 2 75 ～ 130 Graphite[◎] - Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 4,216,684 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Ball Type, 2-Flute for Graphite D-GF-LS-EBDR
OSG
Diamond coating end mill for graphite machining. The manufacturer promises a wonderful extension of tool lifespan.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 10 ～ 65 25 ～ 130 4 ～ 12 2 100 ～ 200 Graphite[◎] - Curved surface / Side / Engraving / R Groove Dia Coat Ball From: 7,320,919 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Long Shank Ball Type, 2-Flute for Graphite GF-LS-EBDR
OSG
Adopts carbide alloy as the base material for extremely excellent wear resistance, achieving a long working life for graphite machining.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 1 ～ 6 10 ～ 65 25 ～ 130 4 ～ 12 2 100 ～ 200 Graphite[◎] - Curved surface / Side / Engraving / R Groove Non-Coated Ball From: 4,884,350 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball-End Type, 2-Flute For finishing FX-H-EBD
OSG
Provides stable cutting not only with HSK holders but also with shrink-fit long arbors with large L/D ratio.
R Size(mm) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material R Precision(μm) Machining Application Coating Type 0.5 ～ 6 1 ～ 12 2.5 ～ 30 6 ～ 12 2 50 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] -0.01～+0.01 Curved surface / Side / Engraving / R Groove TiAlN Ball From: 2,277,619 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product SeriesDòng sản phẩm | Ball End Type, 2-Flute for Copper /Aluminum Alloy / Plastic CAP-EBD | Ball End Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-EBD | ||||||||||||||||||||||||||||||||||||||||
| From | 483,333 VND- | 1,773,426 VND- | 1,913,688 VND- | 4,128,357 VND- | 3,013,153 VND- | 2,341,749 VND- | 3,107,382 VND- | 2,783,385 VND- | 2,798,335 VND- | 2,320,897 VND- | 8,565,563 VND- | 4,580,025 VND- | 4,128,357 VND- | 9,331,393 VND- | 2,145,423 VND- | 2,561,288 VND- | 1,558,215 VND- | 1,857,229 VND- | 900,582 VND | 553,333 VND- | 2,407,650 VND- | 469,924 VND- | 2,451,322 VND- | 2,430,076 VND- | 2,407,650 VND- | 3,185,873 VND | 1,882,212 VND- | 2,407,650 VND- | 3,549,214 VND- | 3,716,032 VND- | 9,089,821 VND- | 3,101,874 VND- | 805,371 VND- | 9,290,082 VND- | 3,454,985 VND- | 2,624,435 VND- | 4,030,193 VND- | 5,151,298 VND- | 4,216,684 VND- | 7,320,919 VND- | 4,884,350 VND- | 2,277,619 VND- |
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| R Size(mm) | 0.05 ～ 10 | 0.05 ～ 1.5 | 0.1 ～ 1.5 | 2 ～ 6 | 1 ～ 6 | 0.5 ～ 6 | 0.5 ～ 10 | 3 ～ 6 | 0.1 ～ 2 | 0.2 ～ 1.5 | 3 ～ 6 | 0.2 ～ 1.5 | 0.5 ～ 6 | 5 ～ 6 | 0.5 ～ 10 | 0.5 ～ 15 | 5 ～ 10 | 0.5 ～ 12.5 | 0.6 | 0.5 ～ 8 | 0.5 ～ 6 | 0.1 ～ 6 | 0.1 ～ 3 | 0.5 ～ 15 | 0.5 ～ 6 | 4 | 0.5 ～ 10 | 0.1 ～ 6 | 3 ～ 10 | 3 ～ 10 | 0.5 ～ 3 | 0.3 ～ 6 | 0.1 ～ 6 | 2 ～ 6 | 3 ～ 10 | 1 ～ 10 | 2 ～ 5 | 1 ～ 6 | 1 ～ 6 | 1 ～ 6 | 1 ～ 6 | 0.5 ～ 6 |
| Blade length (ℓ)(mm) | 0.2 ～ 38 | 0.2 ～ 8 | 0.4 ～ 8 | 8 ～ 60 | 2 ～ 12 | 1.5 ～ 18 | 1.5 ～ 30 | 12 ～ 22 | 0.16 ～ 3.2 | 0.8 ～ 8 | 4 ～ 7 | 0.3 ～ 1.8 | 2.5 ～ 22 | 10 ～ 12 | 2.5 ～ 38 | 2.5 ～ 55 | 10 ～ 20 | 2.5 ～ 50 | 3 | 1 ～ 24 | 1 ～ 12 | 0.4 ～ 18 | 0.2 ～ 6 | 2.5 ～ 55 | 1 ～ 12 | 8 | 2.5 ～ 38 | 0.4 ～ 22 | 12 ～ 38 | 6 ～ 20 | 2.5 ～ 12 | 0.6 ～ 22 | 0.16 ～ 12 | 8 ～ 22 | 12 ～ 38 | 5 ～ 38 | 8 ～ 20 | 20 ～ 130 | 10 ～ 65 | 10 ～ 65 | 10 ～ 65 | 1 ～ 12 |
| Underneck length (ℓ1)(mm) | - | - | - | - | 20 ～ 85 | 6 ～ 160.8 | - | - | 1 ～ 30 | - | 20 | 1.2 ～ 6 | - | - | - | - | - | - | - | 2 ～ 10 | - | - | 1.1 ～ 9 | - | 2.5 ～ 30 | 16 | - | - | - | - | 30 ～ 150 | 10 ～ 80 | 1 ～ 80 | 100 ～ 140 | - | - | - | 25 ～ 80 | 20 ～ 85 | 25 ～ 130 | 25 ～ 130 | 2.5 ～ 30 |
| Shank diameter (d)(mm) | 4 ～ 20 | 3 | 3 | 4 ～ 12 | 6 ～ 16 | 6 ～ 20 | 6 ～ 20 | 5 ～ 11 | 6 | 3 | 6 ～ 12 | 4 ～ 6 | 4 ～ 12 | 6 | 4 ～ 20 | 4 ～ 25 | 6 ～ 12 | 4 ～ 25 | 4 | 4 ～ 16 | 6 ～ 12 | 4 ～ 12 | 6 | 3 ～ 25 | 6 ～ 12 | 8 | 4 ～ 20 | 4 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 12 | 6 ～ 16 | 4 ～ 16 | 10 ～ 16 | 6 ～ 20 | 4 ～ 20 | 4 ～ 10 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 ～ 12 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | 3 | 3 | 4 | 2 | 2 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 40 ～ 160 | 40 | 40 | 80 ～ 200 | 70 ～ 160 | 60 ～ 220 | 60 ～ 200 | 120 ～ 160 | 50 ～ 100 | 40 | 90 ～ 110 | 45 ～ 50 | 60 ～ 140 | 32 ～ 34 | 50 ～ 160 | 50 ～ 180 | 32 ～ 58 | 50 ～ 180 | 50 | 50 ～ 140 | 50 ～ 80 | 35 ～ 70 | 50 | 70 ～ 280 | 50 ～ 80 | 60 | 60 ～ 180 | 60 ～ 140 | 90 ～ 160 | 90 ～ 160 | 100 ～ 220 | 60 ～ 160 | 45 ～ 160 | 200 ～ 250 | 140 ～ 250 | 50 ～ 160 | 80 ～ 100 | 100 ～ 200 | 75 ～ 130 | 100 ～ 200 | 100 ～ 200 | 50 ～ 80 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Graphite[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] | Aluminum[◎] / Copper[○] / Graphite[◎] | Aluminum[◎] / Copper[○] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | Aluminum[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] | Aluminum[○] / Graphite[◎] / Resin[◎] | Graphite[◎] | Graphite[◎] | Graphite[◎] | Graphite[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] |
| R Precision(μm) | -0.007 to 0.003 ～ ±0.01 | - | -0.01～+0.01 | -0.01～+0.01 | -0.015～+0.015 | - | -0.01～+0.01 | -0.01～+0.01 | -0.005～+0.005 | -0.01～+0.01 | -0.01～+0.01 | -0.005～+0.005 | - | - | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | - | -0.01～+0.01 | -0.01～+0.01 ～ -0.005～+0.005 | -0.01～+0.01 | -0.007～+0.003 ～ -0.005～+0.005 | -0.005～+0.005 | -0.01～+0.01 | -0.015～+0.015 ～ -0.01 | -0.003～+0.003 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | - | -0.01～0.01 | -0.005 to +0.005 ～ -0.005～+0.005 | -0.01～0.01 | -0.015～+0.015 | -0.015～+0.015 | -0.015～+0.015 | - | - | - | - | -0.01～+0.01 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove |
| Coating | For General Steels (AlCrN, etc.) | Non-Coated | CrN | DG | TiAlN | For High Hardness (Silicon Group) | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | Dia Coat | Dia Coat | DLC | TiAlN | For General Steels (AlCrN, etc.) | Non-Coated | TiAlN | For High Hardness (Silicon Group) | CrN | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | CrN | TiAlN | TiAlN | Dia Coat | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | DG | Non-Coated | Non-Coated | Dia Coat | Non-Coated | TiAlN |
| Type | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- R0.075
- R0.08
- 0.1
- R0.1
- 0.125
- R0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1
- R1.0
- 1.05
- 1.1
- R1.1
- 1.15
- 1.2
- R1.2
- 1.25
- R1.25
- 1.3
- R1.3
- 1.35
- 1.4
- R1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- R1.6
- 1.65
- 1.7
- R1.7
- 1.75
- R1.75
- 1.8
- R1.8
- 1.85
- 1.9
- R1.9
- 1.95
- 2
- R2
- R2.0
- 2.05
- 2.1
- R2.1
- 2.15
- 2.2
- R2.2
- 2.25
- R2.25
- 2.3
- R2.3
- 2.35
- R2.35
- 2.4
- R2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- R2.6
- 2.65
- 2.7
- R2.7
- 2.75
- R2.75
- 2.8
- R2.8
- 2.85
- 2.9
- R2.9
- 2.95
- 3
- R3
- R3.0
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- R3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- R4.0
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- R4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- R5
- R5.0
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- R6.0
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- R6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7.0
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8.0
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10.0
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22.0
- 22.5
- 23.0
- 24.0
- 25
-
Blade length (ℓ)(mm)
-
0.01～0.96
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.76
- 0.8
- 0.84
- 0.9
- 0.95
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.25
- 1.26
- 1.28
- 1.3
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.5
- 7
- 7.1
- 7.2
- 7.4
- 7.5
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.7
- 9
- 9.5
- 9.7
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.2
- 11.5
-
12～12.7
- 12
- 12.5
- 12.7
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.5
-
15
-
16～16.5
- 16
- 16.5
-
17～17.5
- 17
- 17.5
-
18
-
19
-
20
-
21～21.5
- 21
- 21.5
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
32
-
34
-
35
-
36
-
38
-
40
-
45
-
48
-
50
-
55
-
58
-
60
-
63
-
65
-
70
-
80
-
90
-
100
-
110
-
120
-
130
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
R Precision(μm)
-
Machining Application
-
Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
- AlTiN
- BLUE
- TiSiN
- X-coating
- Y coating
- FX
- DIA
- A+
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy