(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
NACHI(FUJIKOSHI) Carbide Drills
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
36 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A drill that is difficult to break and stable for machining.[Features]· Employs cemented carbide ideal for small diameter hole drilling.· A drill with high rigidity is used.· The cutting load has been reduced by circumferential clearance and thinning.[Applications]· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.2 ～ 1.99 38 ～ 47 2.5 ～ 15 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] End Mill Shank Carbide NA Available Other From: 544,333 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.[Features]· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.5 ～ 20 47 ～ 145 1.65 ～ 90 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] End Mill Shank / straight shank Carbide NA Available Other From: 1,210,000 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
3-flute carbide drill capable of high-precision drilling and reamer-less processing.[Features]· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.[Applications]· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 48 ～ 144 16 ～ 80 general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] End Mill Shank / straight shank Carbide NA Available Other From: 686,931 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 5D AQDEXOH5D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.[Features]· Product lineup is for 3D, 5D and 8D boring depths.· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.· Aqua EX coating achieves stable long life.· Capable of stable wet processing and MQL processing.· For highly-efficient hole drilling up to 5 times the drill diameter.[Applications]· Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 16 56 ～ 194 8 ～ 128 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Titanium[○] End Mill Shank / straight shank Carbide Available Available Other From: 2,785,966 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.[Features]· It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.· Wear resistance and chipping resistance are greatly improved.· Uses a thick core and weak torsion.· The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.[Applications]· High performance machining of 50 to 70 HRC high hardness steel is possible.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 12 44 ～ 108 12 ～ 51 high hardness steel[◎] End Mill Shank / straight shank Carbide NA Available Other From: 629,109 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 3-Flute 5D AQDEXOH3F5D
NACHI(FUJIKOSHI)
[Features]· 3-flute cutting edge with excellent cutting balance ideal for high-precision machining.· Capable of highly-efficient hole drilling up to 5 times the drill diameter.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 78 ～ 194 28 ～ 128 general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] straight shank Carbide Available Available For General Steels (AlCrN, etc.) From: 3,460,740 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 3D AQDEXOH3D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.[Features]· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.· Aqua EX coating achieves stable long life.[Applications]· Stable processing of mild steel to high hardness materials.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 68 ～ 146 17 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] End Mill Shank / straight shank Carbide Available Available Other From: 2,391,126 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Flat Long Shank AQDEXZLS
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.[Features]· Flat drill 10D type with excellent drilling performance.· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 100 ～ 250 14 ～ 90 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] End Mill Shank Carbide Available / NA Available Other From: 1,964,244 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Starting AQDEXST
NACHI(FUJIKOSHI)
[Features]· Highly accurate positioning is possible with good bite.· A multi-function type capable of centering, chamfering and V-grooving.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 48 ～ 131 9 ～ 40 general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] straight shank Carbide NA Available For General Steels (AlCrN, etc.) From: 1,418,252 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.[Features]· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.[Applications]· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3.7 ～ 10 56 ～ 110 24 ～ 60 general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] End Mill Shank / straight shank Carbide NA Available Other From: 2,111,587 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.[Features]· Shape of the new cutting edge greatly improves chip discharge performance.· The cutting resistance is reduced to provide stable machining even on small machines.· A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.[Applications]· The unique thinning shape increases biting and reduces cutting resistance.· Stable cutting performance even with thin work materials and small low-rigidity processing machines.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 16 45 ～ 112 8 ～ 55 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] End Mill Shank / straight shank Carbide - Available Other From: 1,025,000 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A drill for high-speed wet machining and dry machining of aluminum alloys.[Features]· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.· Dry machining of aluminum alloy is possible.· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.· Allows also non-step boring of hole depth 5D.[Applications]· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 12 47 ～ 130 15 ～ 73 Aluminum[◎] / Copper[○] End Mill Shank / straight shank Carbide NA Available DLC From: 889,172 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
An aluminum drill for small diameter hole drilling, which performs high speed wet and dry machining of aluminum alloys.[Features]· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.· Allows non-step boring of hole depth 5D.[Applications]· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 0.5 ～ 1.9 44 ～ 47 6 ～ 15 Aluminum[◎] / Copper[○] End Mill Shank Carbide NA Available DLC From: 805,173 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 8D AQDEXOH8D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.[Features]· Product lineup is for 3D, 5D and 8D boring depths.· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.· Aqua EX coating achieves stable long life.[Applications]· Stable processing of mild steel to high hardness materials.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 81 ～ 242 33 ～ 176 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] End Mill Shank / straight shank Carbide Available Available Other From: 3,347,773 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 20D AQDEXOH20D
NACHI(FUJIKOSHI)
[Features]· Drill capable of wet machining and MQL machining.· For highly-efficient hole drilling up to 20 times the drill diameter.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 10 71 ～ 280 23 ～ 230 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] straight shank Carbide Available Available For General Steels (AlCrN, etc.) From: 4,999,562 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX with Flat Corner R AQDEXZ-R
NACHI(FUJIKOSHI)
[Features]· Drill with excellent drilling performance for counterboring.· Ideal for inclined surfaces and tap pilot hole drilling.· Recommended for hole depth 2D (twice the diameter) or less.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 12 50 ～ 90 14 ～ 54 general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] straight shank Carbide NA Available For General Steels (AlCrN, etc.) From: 1,659,272 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.[Features]· Shape of the new cutting edge greatly improves chip discharge performance.· The cutting resistance is reduced to provide stable machining even on small machines.· A special lubrication function film is provided on the surface layer of the AlCrSi coating.· Longer life by improving lubricity and heat/abrasion resistance.· The unique thinning shape increases biting and reduces cutting resistance.[Applications]· Ideal for thin work materials and small low-rigidity processing machines.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2.1 ～ 16 49 ～ 160 17 ～ 96 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] End Mill Shank / straight shank Carbide NA Available Other From: 1,880,639 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill, Stub, Carbide Drill, AQDS
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.[Features]· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.[Applications]· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.· Drill for dry machining.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 4 ～ 12.5 54 ～ 110 22 ～ 51 general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] End Mill Shank / straight shank Carbide NA Available Other From: 1,801,361 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Flat Regular AQDEXZR
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.[Features]· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.· Flat drill for 4D boring depth with excellent drilling performance.· A centering hole or guide hole is required.[Applications]· Countersinking on inclined surfaces and correction of eccentric bores.· Multifunctional drill that can be used for a wide range of applications, such as thin plate burrless processing, etc.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 20 60 ～ 195 19 ～ 126 general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] - Carbide - Available Other From: 1,686,673 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AQDEXZOH3D Aqua Drill EX Flat Oil Hole 3D
NACHI(FUJIKOSHI)
A 180° flat, internally-lubricated type multi-functional carbide drill.[Features]· Allows high efficiency flat drilling up to hole depth 3D.· A drill with oil hole that supports stainless steel.· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 68 ～ 146 2 ～ 72 general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] End Mill Shank / straight shank Carbide Available Available Other From: 2,656,894 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 15D AQDEXOH15D
NACHI(FUJIKOSHI)
[Features]· Drill capable of wet machining and MQL machining.· For highly-efficient hole drilling up to 15 times the drill diameter.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 12 66 ～ 276 18 ～ 216 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] straight shank Carbide Available Available For General Steels (AlCrN, etc.) From: 4,357,228 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill with Bottom Blade 3-Flute AQDED3F
NACHI(FUJIKOSHI)
Coated carbide drill which achieves high efficiency machining of holes in cast materials and screw pilot holes.[Features]· Cast iron and aluminum cast parts have a high performance machined hole with H7 precision.· 3-flute cutting edge with excellent cutting balance minimizes cutting vibration during machining.· Finish processing is possible with work efficiency of 10 times or more compared to a reamer.[Applications]· 3-flute cutting edge with excellent cutting balance ideal for high-quality machining.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 12 48 ～ 108 16 ～ 51 general steel[◎] / Cast Iron[○] End Mill Shank / straight shank Carbide NA Available Other From: 1,668,182 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.[Features]· Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.· Longer life than conventional FC drills.· The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.· A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.[Applications]· Ideal for long life machining of FC, FCD, and low carbon steel.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 12 47 ～ 130 15 ～ 73 general steel[◎] / Cast Iron[◎] End Mill Shank / straight shank Carbide NA Available Other From: 1,728,771 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AQDEXZOH5D Aqua Drill EX Flat Oil Hole 5D
NACHI(FUJIKOSHI)
A 180° flat, internally-lubricated type multi-functional carbide drill.[Features]· Allows high efficiency flat drilling up to hole depth 5D.· A centering hole or guide hole is required.· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.· Capable of producing an accurate counter-bore surface with one shot.· Aqua EX coating improves heat and wear resistance, providing long life.[Applications]· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 74 ～ 178 20 ～ 104 general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] End Mill Shank / straight shank Carbide Available Available Other From: 3,123,316 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 10D AQDEXOH10D
NACHI(FUJIKOSHI)
[Features]· Drill capable of wet machining and MQL machining.· For highly-efficient hole drilling up to 10 times the drill diameter.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1 ～ 12 61 ～ 216 13 ～ 156 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] straight shank Carbide Available Available For General Steels (AlCrN, etc.) From: 3,714,894 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 25D AQDEXOH25D
NACHI(FUJIKOSHI)
[Features]· Drill capable of wet machining and MQL machining.· For highly-efficient hole drilling up to 25 times the drill diameter.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 8 134 ～ 274 84 ～ 224 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] straight shank Carbide Available Available For General Steels (AlCrN, etc.) From: 6,032,008 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 30D AQDEXOH30D
NACHI(FUJIKOSHI)
[Features]· Drill capable of wet machining and MQL machining.· For highly-efficient hole drilling up to 30 times the drill diameter.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 8 149 ～ 314 99 ～ 264 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] straight shank Carbide Available Available For General Steels (AlCrN, etc.) From: 6,726,530 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole Pilot AQDEXOHPLT
NACHI(FUJIKOSHI)
[Features]· Drill for drilling guide holes.· High bite performance guide hole improves centering during deep hole drilling, giving improved drilling performance.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 1.015 ～ 12.03 54 ～ 122 3.3 ～ 54 general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] straight shank Carbide Available Available For General Steels (AlCrN, etc.) From: 2,154,830 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 3-Flute 3D AQDEXOH3F3D
NACHI(FUJIKOSHI)
[Features]· 3-flute cutting edge with excellent cutting balance ideal for high-precision machining.· Capable of highly-efficient hole drilling up to 3 times the drill diameter.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 68 ～ 146 17 ～ 80 general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] straight shank Carbide Available Available For General Steels (AlCrN, etc.) From: 2,916,110 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole 3-Flute 10D AQDEXOH3F10D
NACHI(FUJIKOSHI)
[Features]· 3-flute cutting edge with excellent cutting balance ideal for high-precision machining.· Capable of highly-efficient hole drilling up to 10 times the drill diameter.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 89 ～ 268 39 ～ 208 general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] straight shank Carbide Available Available For General Steels (AlCrN, etc.) From: 4,655,413 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX 3-Flute Regular AQDEX3FR
NACHI(FUJIKOSHI)
[Features]· Uses 3-flute cutting edge with excellent cutting balance.· Realizes high precision hole processing that is even possible without a reamer.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 49 ～ 160 19 ～ 96 general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] straight shank Carbide NA Available For General Steels (AlCrN, etc.) From: 2,211,995 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX 3-Flute Hard AQDEX3FH
NACHI(FUJIKOSHI)
[Features]· Capable of high-precision and high-efficiency machining of 50 to 68 HRC hardened steel.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3 ～ 16 45 ～ 112 13 ～ 55 high hardness steel[○] straight shank Carbide NA Available For General Steels (AlCrN, etc.) From: 2,099,597 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Oil Hole Cross for Cast Iron 5D AQDEXXOH5D
NACHI(FUJIKOSHI)
[Features]· Ideal for cross hole machining where the holes of both the cast iron and aluminum cast parts intersect.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 8.6 ～ 9.5 127 ～ 136 72 ～ 76 Cast Iron[○] / Aluminum[○] straight shank Carbide Available Available For General Steels (AlCrN, etc.) From: 13,829,828 VND Days to Ship: Số ngày giao hàng: 9 Day(s) or more
9 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLC Flat Long Shank Drill DLCDZLS
NACHI(FUJIKOSHI)
[Features]· Flat drill 10D type with excellent drilling performance.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 3.7 100 18 Aluminum[○] / Copper[○] straight shank Carbide NA Available DLC From: 3,576,678 VND Days to Ship: Số ngày giao hàng: 11 Day(s) or more
11 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Power Feed 2D PF2D
NACHI(FUJIKOSHI)
[Features]· A 2D drill bit that realizes high accuracy, long life machining with ultra-high feed machining with machining centers or lathes that can easily become clogged with scrap.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 10 45 ～ 87 6 ～ 10 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] End Mill Shank Carbide - Available Other From: 1,729,186 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Aqua Drill EX Power Feed 4D PF4D
NACHI(FUJIKOSHI)
[Features]· A 4D drill bit that realizes high accuracy, long life machining with ultra-high feed machining with machining centers or lathes that can easily become clogged with scrap.
Hole diameter (drill diameter) D(mm) Overall Length L(mm) Groove Length L(mm) work material Shank Type Tool Material Type With/without Oil Hole Coating Y/N Coating Type 2 ～ 10 49 ～ 98 - general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] End Mill Shank Carbide - Available Other From: 2,039,731 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| Hole diameter (drill diameter) D(mm) |
| Overall Length L(mm) |
| Groove Length L(mm) |
| work material |
| Shank Type |
| Tool Material Type |
| With/without Oil Hole |
| Coating Y/N |
| Coating Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
| Product SeriesDòng sản phẩm | ||||||||||||||||||||||||||||||||||||
| From | 544,333 VND- | 1,210,000 VND- | 686,931 VND- | 2,785,966 VND- | 629,109 VND- | 3,460,740 VND- | 2,391,126 VND- | 1,964,244 VND- | 1,418,252 VND- | 2,111,587 VND- | 1,025,000 VND- | 889,172 VND- | 805,173 VND- | 3,347,773 VND- | 4,999,562 VND- | 1,659,272 VND- | 1,880,639 VND- | 1,801,361 VND- | 1,686,673 VND- | 2,656,894 VND- | 4,357,228 VND- | 1,668,182 VND- | 1,728,771 VND- | 3,123,316 VND- | 3,714,894 VND- | 6,032,008 VND- | 6,726,530 VND- | 2,154,830 VND- | 2,916,110 VND- | 4,655,413 VND- | 2,211,995 VND- | 2,099,597 VND- | 13,829,828 VND- | 3,576,678 VND | 1,729,186 VND- | 2,039,731 VND- |
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more |
| Hole diameter (drill diameter) D(mm) | 0.2 ～ 1.99 | 0.5 ～ 20 | 3 ～ 16 | 1 ～ 16 | 2 ～ 12 | 3 ～ 16 | 3 ～ 16 | 3 ～ 20 | 3 ～ 20 | 3.7 ～ 10 | 2 ～ 16 | 2 ～ 12 | 0.5 ～ 1.9 | 3 ～ 16 | 1 ～ 10 | 3 ～ 12 | 2.1 ～ 16 | 4 ～ 12.5 | 3 ～ 20 | 3 ～ 16 | 1 ～ 12 | 3 ～ 12 | 2 ～ 12 | 3 ～ 16 | 1 ～ 12 | 3 ～ 8 | 3 ～ 8 | 1.015 ～ 12.03 | 3 ～ 16 | 3 ～ 16 | 3 ～ 16 | 3 ～ 16 | 8.6 ～ 9.5 | 3.7 | 2 ～ 10 | 2 ～ 10 |
| Overall Length L(mm) | 38 ～ 47 | 47 ～ 145 | 48 ～ 144 | 56 ～ 194 | 44 ～ 108 | 78 ～ 194 | 68 ～ 146 | 100 ～ 250 | 48 ～ 131 | 56 ～ 110 | 45 ～ 112 | 47 ～ 130 | 44 ～ 47 | 81 ～ 242 | 71 ～ 280 | 50 ～ 90 | 49 ～ 160 | 54 ～ 110 | 60 ～ 195 | 68 ～ 146 | 66 ～ 276 | 48 ～ 108 | 47 ～ 130 | 74 ～ 178 | 61 ～ 216 | 134 ～ 274 | 149 ～ 314 | 54 ～ 122 | 68 ～ 146 | 89 ～ 268 | 49 ～ 160 | 45 ～ 112 | 127 ～ 136 | 100 | 45 ～ 87 | 49 ～ 98 |
| Groove Length L(mm) | 2.5 ～ 15 | 1.65 ～ 90 | 16 ～ 80 | 8 ～ 128 | 12 ～ 51 | 28 ～ 128 | 17 ～ 80 | 14 ～ 90 | 9 ～ 40 | 24 ～ 60 | 8 ～ 55 | 15 ～ 73 | 6 ～ 15 | 33 ～ 176 | 23 ～ 230 | 14 ～ 54 | 17 ～ 96 | 22 ～ 51 | 19 ～ 126 | 2 ～ 72 | 18 ～ 216 | 16 ～ 51 | 15 ～ 73 | 20 ～ 104 | 13 ～ 156 | 84 ～ 224 | 99 ～ 264 | 3.3 ～ 54 | 17 ～ 80 | 39 ～ 208 | 19 ～ 96 | 13 ～ 55 | 72 ～ 76 | 18 | 6 ～ 10 | - |
| work material | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Titanium[○] | high hardness steel[◎] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Cast Iron[○] | general steel[◎] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] | high hardness steel[○] | Cast Iron[○] / Aluminum[○] | Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] |
| Shank Type | End Mill Shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | straight shank | End Mill Shank / straight shank | End Mill Shank | straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank / straight shank | straight shank | straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | - | End Mill Shank / straight shank | straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | straight shank | straight shank | straight shank | straight shank | straight shank | straight shank | straight shank | straight shank | straight shank | straight shank | End Mill Shank | End Mill Shank |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| With/without Oil Hole | NA | NA | NA | Available | NA | Available | Available | Available / NA | NA | NA | - | NA | NA | Available | Available | NA | NA | NA | - | Available | Available | NA | NA | Available | Available | Available | Available | Available | Available | Available | NA | NA | Available | NA | - | - |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | Other | Other | Other | Other | Other | For General Steels (AlCrN, etc.) | Other | Other | For General Steels (AlCrN, etc.) | Other | Other | DLC | DLC | Other | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Other | Other | Other | Other | For General Steels (AlCrN, etc.) | Other | Other | Other | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | DLC | Other | Other |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.13
- 0.135
- 0.14
- 0.145
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.397
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.794
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1～1.995
- 1
- 1/2(inch)
- 1/4(inch)
- 1/8(inch)
- 1/16(inch)
- 1/32(inch)
- 1/64(inch)
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.191
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.587
- 1.59
- 1.595
- 1.6
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.984
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2.01
- 2.015
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.115
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.215
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.315
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.381
- 2.383
- 2.39
- 2.4
- 2.41
- 2.415
- 2.42
- 2.43
- 2.439
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.489
- 2.49
- 2.5
- 2.51
- 2.515
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.578
- 2.58
- 2.59
- 2.6
- 2.61
- 2.615
- 2.62
- 2.63
- 2.64
- 2.642
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.705
- 2.71
- 2.715
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.778
- 2.779
- 2.78
- 2.79
- 2.8
- 2.81
- 2.815
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.915
- 2.92
- 2.93
- 2.94
- 2.947
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3/8(inch)
- 3/16(inch)
- 3/32(inch)
- 3/64(inch)
- 3.01
- 3.02
- 3.03
- 3.04
- 3.048
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.264
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.455
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.571
- 3.572
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.658
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.734
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.969
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.039
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.217
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.366
- 4.366
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.623
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.762
- 4.763
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.852
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5/8(inch)
- 5/16(inch)
- 5/32(inch)
- 5/64(inch)
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.106
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.159
- 5.159
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.556
- 5.558
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.616
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.953
- 5.954
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.99
- 6
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.1
- 6.13
- 6.15
- 6.2
- 6.23
- 6.25
- 6.3
- 6.33
- 6.35
- 6.35
- 6.35 (¼")
- 6.375
- 6.4
- 6.43
- 6.45
- 6.48
- 6.49
- 6.5
- 6.51
- 6.52
- 6.528
- 6.53
- 6.55
- 6.6
- 6.63
- 6.65
- 6.7
- 6.73
- 6.746
- 6.747
- 6.75
- 6.8
- 6.83
- 6.85
- 6.9
- 6.93
- 6.95
- 6.98
- 6.99
-
7～7.99
- 7
- 7/16(inch)
- 7/32(inch)
- 7/64(inch)
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.13
- 7.14
- 7.144
- 7.145
- 7.15
- 7.2
- 7.23
- 7.25
- 7.3
- 7.33
- 7.35
- 7.36
- 7.38
- 7.4
- 7.43
- 7.45
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.541
- 7.541
- 7.55
- 7.6
- 7.63
- 7.65
- 7.7
- 7.73
- 7.75
- 7.8
- 7.83
- 7.85
- 7.9
- 7.93
- 7.937
- 7.938
- 7.94
- 7.95
- 7.98
- 7.99
-
8～8.99
- 8
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.1
- 8.13
- 8.15
- 8.2
- 8.23
- 8.25
- 8.3
- 8.33
- 8.334
- 8.35
- 8.4
- 8.43
- 8.433
- 8.45
- 8.48
- 8.49
- 8.5
- 8.50000000000001
- 8.51
- 8.52
- 8.53
- 8.55
- 8.58
- 8.6
- 8.63
- 8.65
- 8.7
- 8.73
- 8.731
- 8.733
- 8.75
- 8.8
- 8.80000000000001
- 8.83
- 8.85
- 8.9
- 8.90000000000001
- 8.93
- 8.95
- 8.98
- 8.99
-
9～9.99
- 9
- 9/16(inch)
- 9/32(inch)
- 9/64(inch)
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.128
- 9.129
- 9.13
- 9.15
- 9.2
- 9.20000000000001
- 9.21
- 9.23
- 9.24
- 9.25
- 9.26
- 9.3
- 9.30000000000001
- 9.33
- 9.347
- 9.35
- 9.36
- 9.38
- 9.4
- 9.40000000000001
- 9.43
- 9.45
- 9.48
- 9.49
- 9.5
- 9.50000000000001
- 9.51
- 9.52
- 9.525
- 9.53
- 9.54
- 9.55
- 9.6
- 9.60000000000001
- 9.63
- 9.65
- 9.7
- 9.70000000000001
- 9.73
- 9.75
- 9.8
- 9.80000000000001
- 9.83
- 9.85
- 9.9
- 9.90000000000001
- 9.92
- 9.921
- 9.922
- 9.93
- 9.95
- 9.97
- 9.98
- 9.99
-
10～10.99
- 10
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.13
- 10.15
- 10.2
- 10.23
- 10.25
- 10.3
- 10.319
- 10.32
- 10.33
- 10.35
- 10.4
- 10.43
- 10.45
- 10.48
- 10.49
- 10.5
- 10.51
- 10.52
- 10.53
- 10.55
- 10.6
- 10.63
- 10.65
- 10.7
- 10.716
- 10.716
- 10.72
- 10.73
- 10.75
- 10.8
- 10.83
- 10.85
- 10.9
- 10.93
- 10.95
- 10.98
- 10.99
-
11～11.99
- 11
- 11/32(inch)
- 11/64(inch)
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.112
- 11.113
- 11.13
- 11.15
- 11.2
- 11.22
- 11.23
- 11.24
- 11.25
- 11.3
- 11.33
- 11.35
- 11.36
- 11.38
- 11.4
- 11.43
- 11.45
- 11.48
- 11.49
- 11.5
- 11.509
- 11.509
- 11.51
- 11.52
- 11.53
- 11.55
- 11.56
- 11.6
- 11.63
- 11.65
- 11.7
- 11.73
- 11.75
- 11.8
- 11.83
- 11.85
- 11.9
- 11.906
- 11.908
- 11.91
- 11.93
- 11.95
- 11.98
- 11.99
-
12～12.99
- 12
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.15
- 12.2
- 12.25
- 12.3
- 12.303
- 12.304
- 12.35
- 12.4
- 12.45
- 12.48
- 12.49
- 12.5
- 12.51
- 12.52
- 12.55
- 12.6
- 12.65
- 12.7
- 12.7
- 12.75
- 12.8
- 12.85
- 12.9
- 12.95
- 12.96
- 12.98
- 12.99
-
13～13.9
- 13
- 13/32(inch)
- 13/64(inch)
- 13.096
- 13.097
- 13.1
- 13.2
- 13.25
- 13.3
- 13.4
- 13.43
- 13.49
- 13.494
- 13.5
- 13.5~25
- 13.55
- 13.6
- 13.7
- 13.8
- 13.89
- 13.891
- 13.891
- 13.9
-
14～14.96
- 14
- 14.1
- 14.2
- 14.25
- 14.287
- 14.288
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.684
- 14.684
- 14.7
- 14.75
- 14.8
- 14.9
- 14.96
-
15～15.9
- 15
- 15/32(inch)
- 15/64(inch)
- 15.083
- 15.1
- 15.2
- 15.25
- 15.3
- 15.4
- 15.479
- 15.5
- 15.55
- 15.6
- 15.7
- 15.75
- 15.8
- 15.875
- 15.875
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.271
- 16.3
- 16.4
- 16.5
- 16.6
- 16.67
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17/32(inch)
- 17/64(inch)
- 17.1
- 17.2
- 17.3
- 17.4
- 17.463
- 17.5
- 17.55
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.258
- 18.3
- 18.4
- 18.5
- 18.6
- 18.654
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19/64(inch)
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.55
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21/64(inch)
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23/64(inch)
- 23.5
-
24～24.5/24.7
- 24
- 24.5
- 24.5/24.7
-
25～25.5
- 25
- 25/64(inch)
- 25.5
-
26～26.5/26.7
- 26
- 26.5
- 26.5/26.7
-
27～27.5
- 27
- 27/64(inch)
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29/64(inch)
- 29.5
-
30～30.5
- 30
- 30.5
-
31～31.5
- 31
- 31/64(inch)
- 31.5
-
32～32.5
- 32
- 32.5
-
33～33.5
- 33
- 33/64(inch)
- 33.5
-
34～34.5
- 34
- 34.5
-
35～35.5
- 35
- 35/64(inch)
- 35.5
-
36～36.5
- 36
- 36.5
-
37～37.5
- 37
- 37/64(inch)
- 37.5
-
38～38.5
- 38
- 38.5
-
39～39.5
- 39
- 39.5
-
40～40.5
- 40
- 40.5
-
41～41.5
- 41
- 41.5
-
42～42.5
- 42
- 42.5
-
43～43.5
- 43
- 43.5
-
44～44.5
- 44
- 44.5
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50
-
55
-
60
-
-
Overall Length L(mm)
-
Groove Length L(mm)
-
0～0.9
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.4
- 0.44
- 0.48
- 0.5
- 0.55
- 0.6
- 0.7
- 0.8
- 0.88
- 0.9
-
1～1.98
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.97
- 2
- 2.1
- 2.2
- 2.3
- 2.31
- 2.4
- 2.5
- 2.6
- 2.64
- 2.7
- 2.8
- 2.9
- 2.97
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.1
- 10.2
- 10.4
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.6
- 11.7
- 11.8
-
12～12.8
- 12
- 12.2
- 12.3
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.6
-
27～27.8
- 27
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.4
- 29
- 29.3
- 29.4
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.7
- 31
- 31.2
- 31.5
- 31.7
-
32～32.8
- 32
- 32.3
- 32.4
- 32.8
-
33～33.8
- 33
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.4
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.8
-
43～43.5
- 43
- 43.2
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
140
-
143
-
144
-
145
-
146
-
148
-
149
-
150
-
152
-
153
-
154
-
155
-
156
-
159
-
160
-
161
-
162
-
163
-
165
-
167
-
168
-
169
-
170
-
171
-
173
-
175
-
176
-
177
-
180
-
182
-
183
-
184
-
185
-
188
-
189
-
190
-
195
-
196
-
197
-
198
-
200
-
205
-
207
-
208
-
210
-
212
-
214
-
215
-
216
-
218
-
219
-
220
-
222
-
223
-
224
-
225
-
227
-
230
-
231
-
232
-
234
-
240
-
242
-
248
-
250
-
252
-
253
-
258
-
260
-
263
-
264
-
265
-
270
-
272
-
274
-
277
-
280
-
282
-
292
-
295
-
300
-
302
-
310
-
315
-
318
-
322
-
323
-
327
-
330
-
337
-
340
-
343
-
350
-
360
-
372
-
385
-
400
-
402
-
432
-
440
-
460
-
512
-
550
-
692
-
860
-
1030
-
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
- Machinable Ceramics
-
Shank Type
-
End Mill Shank
-
straight shank
-
Taper shank
-
End Mill Shank
-
Tool Material Type
- High-speed steel
- Carbide
- PCD
-
With/without Oil Hole
-
Coating Y/N
-
Coating Type
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy