MITUTOYO Inner Diameter Measuring Instruments（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Inside Micrometers SERIES 141 — Interchangeable Rod Type(Measuring Range: 25-225mm)

  MITUTOYO

  • Wide range of inside diameter measurements possible by combining one or more interchangeable rods. • Each interchangeable rod is marked with its measuring range. • For models supplied with more than one interchangeable rod, the full measuring range is achieved by combining spacing collars with the rods. • Both micrometer head and rods are satinchrome finished throughout. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 137 — Extension Rod Type (main unit)

  MITUTOYO

  • Micrometer head for Extension Rod Type inside micrometer. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  From: 3,205,000 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 133 — Single Rod Type(Measuring Range: 175-200mm)

  MITUTOYO

  • Standard single rod type inside micrometer. • Carbide measuring faces. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  From: 2,665,000 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — for Small Holes(Measuring Range: 6-18.5mm)

  MITUTOYO

  • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • Setting Rings are available to aid in accurately setting a gage before making a measurement.

  Calibration Certificate
  -

  From: 3,973,077 VND
  Days to Ship: Số ngày giao hàng: 2 Day(s)

  2 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 339 — Extension Pipe Type

  MITUTOYO

  • Wide range of inside diameter measurements possible by combining extension pipes and anvils with the micrometer head. • Carbide measuring faces are available. • The sleeve is rotated to adjust the index line position when setting to a length standard. • An inside length standard is required for accurately setting the micrometer.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 337 — Extension Rod Type

  MITUTOYO

  • Wide range of inside measurements possible by combining extension rods and anvils with the micrometer head. • Two types of measuring faces are available; with or without carbide tip. (No. 337-101/301/302/102/303/304 only available with carbide tip.) • The sleeve is rotated to adjust the index line position when setting to a length standard. • An inside length standard is required for accurately setting the micrometer. • Order No. 337-101/301/302/102/303/304

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Non-Interchangable-Head Sets for Holtest (Type II) SERIES 368 — Three-point Internal Micrometers

  MITUTOYO

  • Hardened tool-steel anvils (instead of titanium-coated carbide) for a more economically priced tool. • Same accuracy as the titanium-coated Holtest models. • Constant-force device allows repeatable measurement. • Can measure deep holes using an Extension Rod (optional).

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Interchangeable-Head Sets for Digimatic Holtest SERIES 468 — Three-point Internal Micrometers

  MITUTOYO

  • Interchangeable-Head Sets covering an extended measuring range using multiple heads

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Non-Interchangeable-Head Sets for Holtest SERIES 368 — Three-point/Two-point Internal Micrometers

  MITUTOYO

  Non-Interchangeable-Head Sets for Holtest SERIES 368 — Three-point/Two-point Internal Micrometers

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Non-Interchangeable-Head Sets for Digimatic Holtest SERIES 468 — Three-point Internal Micrometers

  MITUTOYO

  Non-Interchangeable-Head Sets for Digimatic Holtest SERIES 468 — Three-point Internal Micrometers

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — ABSOLUTE Digimatic Bore Gages

  MITUTOYO

  • These ABSOLUTE Digimatic bore gages are exclusively designed for inside diameter measurement. • Up to four extension rods (250mm or 500mm) can be used for measuring at the bottom of a hole 2m deep. • ABS (ABSOLUTE) type bore gages are not subject to overspeed error. • The display and grip can be rotated up to 320 degrees and the display can be inclined up to90 degrees, so that it is easily readable from any direction. • The minimum value holding function provides easy measurement of hole diameter. • Setting the Bore Gage to a master value using a gauge block set allows quick and accurate setting. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gagebefore making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Anvil for SERIES 511 — for Blind Holes

  MITUTOYO

  Standard accessories for SERIES 511 — for Blind Holes

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Micrometer head for SERIES 511 — with Micrometer Head.

  MITUTOYO

  Standard accessories for Bore Gages SERIES 511 — with Micrometer Head.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — with Micrometer Head(Measuring Range: 60-800mm)

  MITUTOYO

  • Micrometer head is attached to the anvil for accurate dimensional setting. • Longer plunger stroke with no affect on accuracy.. • Carbide is used for the contact point ensuring high durability and wear resistance.. • This model reduces the influence of heat from the operator's hand by 50% by increasingthe. grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement.. • Wide measuring range with sub-anvils.. • Alternative indicators may be used in place of those recommended*.. * Some indicators and protection covers cannot be used with these bore gages.. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other.than the recommended models.. • Optional extension rods can be attached for measuring deep holes.. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage. before making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sub-anvil for Bore Gages SERIES 511

  MITUTOYO

  Standard accessories for Bore Gages SERIES 511

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511(Measuring Range: 0.7-16inch)

  MITUTOYO

  • Longer plunger stroke with no affect on accuracy. • Carbide is used for the contact point ensuring high durability and wear resistance. • This model reduces the influence of heat from the operator's hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement. • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • Optional extension rods can be attached for measuring deep holes. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Spanner for Bore Gages SERIES 511 — for Small Holes

  MITUTOYO

  Standard Accessories for Bore Gages SERIES 511 — for Small Holes

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Pin point for Bore Gages SERIES 526 — for Extra Small Holes

  MITUTOYO

  Standard Accessories for Bore Gages SERIES 526 — for Extra Small Holes

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inside Micrometers SERIES 141 — Interchangeable Rod Type(Measuring Range: 1-40inch)

  MITUTOYO

  • Wide range of inside diameter measurements possible by combining one or more interchangeable rods. • Each interchangeable rod is marked with its measuring range. • For models supplied with more than one interchangeable rod, the full measuring range is achieved by combining spacing collars with the rods. • Both micrometer head and rods are satinchrome finished throughout. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 139 — Extension Pipe Type (main unit)

  MITUTOYO

  • Micrometer head for Extension Pipe Type inside micrometer. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring, CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Spanner for Bore Gages SERIES 511 — with Micrometer Head

  MITUTOYO

  Standard accessories for Bore Gages SERIES 511 — with Micrometer Head.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 139, 339, 140 — Extension Pipe Type

  MITUTOYO

  • World's highest performing micrometer overall. • Extended battery life of approximately 2.4 years. • Ergonomic anti-slip frame cover and front panel for more comfortable hand-held measurements. • Ratchet thimble provides better operability for one-handed operation. • Oil-resistant material used for all plastic parts. • Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. • Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as Excel. • Two types of constant-force devices are available: Ratchet Stop and Ratchet Thimble. • Measuring faces: Carbide

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 137, 337 — Extension Rod Type (Main Unit)

  MITUTOYO

  • Micrometer head for Extension Rod Type inside micrometer. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 133 — Single Rod Type(Measuring Range: 2-12inch)

  MITUTOYO

  • Standard single rod type inside micrometer. • Carbide measuring faces. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Calibration Certificate

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO
Product SeriesDòng sản phẩm	Inside Micrometers SERIES 141 — Interchangeable Rod Type(Measuring Range: 25-225mm)	Tubular Inside Micrometers SERIES 137 — Extension Rod Type (main unit)	Tubular Inside Micrometers SERIES 133 — Single Rod Type(Measuring Range: 175-200mm)	Bore Gages SERIES 511 — for Small Holes(Measuring Range: 6-18.5mm)	Tubular Inside Micrometers SERIES 339 — Extension Pipe Type	Tubular Inside Micrometers SERIES 337 — Extension Rod Type	Non-Interchangable-Head Sets for Holtest (Type II) SERIES 368 — Three-point Internal Micrometers	Interchangeable-Head Sets for Digimatic Holtest SERIES 468 — Three-point Internal Micrometers	Non-Interchangeable-Head Sets for Holtest SERIES 368 — Three-point/Two-point Internal Micrometers	Non-Interchangeable-Head Sets for Digimatic Holtest SERIES 468 — Three-point Internal Micrometers	Bore Gages SERIES 511 — ABSOLUTE Digimatic Bore Gages	Anvil for SERIES 511 — for Blind Holes	Micrometer head for SERIES 511 — with Micrometer Head.	Bore Gages SERIES 511 — with Micrometer Head(Measuring Range: 60-800mm)	Sub-anvil for Bore Gages SERIES 511	Bore Gages SERIES 511(Measuring Range: 0.7-16inch)	Spanner for Bore Gages SERIES 511 — for Small Holes	Pin point for Bore Gages SERIES 526 — for Extra Small Holes	Inside Micrometers SERIES 141 — Interchangeable Rod Type(Measuring Range: 1-40inch)	Tubular Inside Micrometers SERIES 139 — Extension Pipe Type (main unit)	Spanner for Bore Gages SERIES 511 — with Micrometer Head	Tubular Inside Micrometers SERIES 139, 339, 140 — Extension Pipe Type	Tubular Inside Micrometers SERIES 137, 337 — Extension Rod Type (Main Unit)	Tubular Inside Micrometers SERIES 133 — Single Rod Type(Measuring Range: 2-12inch)
From	-	3,205,000 VND	2,665,000 VND	3,973,077 VND	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Days to ShipSố ngày giao hàng	Quote	46 Day(s)	46 Day(s)	2 Day(s)	Quote	Quote	Quote	46 Day(s) or more	Quote	46 Day(s) or more	Quote	Quote	Quote	46 Day(s) or more	Quote	Quote	Quote	46 Day(s) or more	46 Day(s) or more	Quote	Quote	46 Day(s) or more	46 Day(s) or more	Quote
Calibration Certificate	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…