(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
MISUMI Carbide Radius End Mills（Machining Application：Groove）
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
37 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
MISUMI
[Features]·Alteration end mill that can specify radius size of carbide end mill in 0.1 mm increments·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Non-Coated
- General Steel
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 20 0.1 ～ 3 4 ～ 60 2 40 ～ 125 general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 20 - Groove For High Hardness (Silicon Group) / Non-Coated radius Standard torsion (30-40°) ±0.02 Days to Ship: Số ngày giao hàng: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide radius end mill, 2-flute / short model
MISUMI
Radius end mills are available at low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 12 0.1 ～ 3 3 ～ 30 2 50 ～ 75 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] 4 ～ 12 - Groove For General Steels (AlCrN, etc.) radius Standard torsion (30-40°) ±0.02 From: 442,479 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
MISUMI
[Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.3 ～ 1 4.5 ～ 18 3 40 ～ 65 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 ～ 12 - Groove For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.01 From: 1,564,545 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]·Radius type of multi-function end mill·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping
- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 20 0.2 ～ 2 5 ～ 56 3 60 ～ 130 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 ～ 20 26 ～ 92 Groove For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 2-flute / short model
MISUMI
[Features]·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 20 0.1 ～ 3 2 ～ 40 2 40 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 20 17 ～ 45 Groove For High Hardness (Silicon Group) radius Standard torsion (30-40°) ±0.01 ～ ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
MISUMI
The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness
- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- R (Regular)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 12 0.2 ～ 1 5 ～ 36 3 40 ～ 80 Aluminum[◎] / Copper[○] / Resin[○] 4 ～ 12 23 ～ 50 Groove DLC radius Powerful Torsion (45°-60°) ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
MISUMI
[Features]·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.5 ～ 1 4.5 ～ 18 3 60 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 ～ 12 14 ～ 68 Groove For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
MISUMI
[Features]·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 12 0.1 ～ 3 1.5 ～ 18 2 40 ～ 75 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 12 14 ～ 45 Groove For High Hardness (Silicon Group) radius Standard torsion (30-40°) ±0.01 ～ ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model
MISUMI
[Features]·Multi-function long neck radius with high feed capability and excellent durability·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 3 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 4 0.2 ～ 1 0.8 ～ 3.2 3 45 ～ 70 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○/◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 6 6 ～ 30 Groove For High Hardness (Silicon Group) Long-Neck Radius Powerful Torsion (45°-60°) ±0.005 ～ ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model
MISUMI
Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 5 ～ 22 0.5 ～ 2 9 ～ 33 3 80 ～ 200 Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] 4 ～ 20 - Groove Non-Coated radius Powerful Torsion (45°-60°) ±0.02 From: 1,801,712 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· A tool with short blade length that suppresses chatter during machining
- Volume Discount
- High-Hardness Steel
- 3 Flutes
- SR
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 10 0.3 ～ 1 10 ～ 25 3 50 ～ 80 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] 4 ～ 10 - Groove For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±10 From: 26,499,735 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 12 0.813 ～ 2.438 8 ～ 24 3 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 6 ～ 12 - Groove For High Hardness (Silicon Group) High-Feed Radius Powerful Torsion (45°-60°) - From: 3,002,853 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 12 0.813 ～ 2.438 8 ～ 24 3 80 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 6 ～ 12 35 ～ 108 Groove For High Hardness (Silicon Group) High-Feed Radius Powerful Torsion (45°-60°) - From: 2,361,520 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
MISUMI
3-flute 45° helix radius that's resistant to chattering is available at an affordable price
- Volume Discount
- XAL
- General Steel
- 3 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 0 ～ 16 0.2 ～ 2 16 ～ 48 3 60 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] 6 ～ 16 - Groove For General Steels (AlCrN, etc.) radius Powerful Torsion (45°-60°) ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAL series carbide radius end mill, 4-flute, 45° torsion / regular model
MISUMI
4-Flute Radius for High-Efficiency and High-Speed Machining
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 10 0.3 - 4 90 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] 10 - Groove - - - 10 Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
MISUMI
[Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 12 0.5 ～ 2 2 ～ 12 3 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 4 ～ 12 - Groove For High Hardness (Silicon Group) High-Feed Radius Powerful Torsion (45°-60°) ±0.015 From: 1,742,415 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
MISUMI
[Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 12 0.5 ～ 2 4 ～ 24 3 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 4 ～ 12 - Groove For High Hardness (Silicon Group) High-Feed Radius Powerful Torsion (45°-60°) ±0.015 From: 1,699,876 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type
MISUMI
[Features]·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.3 ～ 2 5 ～ 26 3 60 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 ～ 12 18 ～ 70 Groove For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 2-flute stub model
MISUMI
[Features]·Rigidity-oriented type designed with optimum blade length, shank length and overall length in consideration of processing using shrink fit holder·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 12 0.2 ～ 3 3 ～ 18 2 35 ～ 60 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 12 - Groove For High Hardness (Silicon Group) radius Standard torsion (30-40°) ±0.01 From: 931,471 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 2-flute / regular model
MISUMI
[Features]·General purpose 2-flute end mill with regular flute length type with cutting edge radius·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 20 0.1 ～ 3 3 ～ 60 2 45 ～ 125 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 20 23 ～ 55 Groove For High Hardness (Silicon Group) radius Standard torsion (30-40°) ±0.01 ～ ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck radius end mill, 2-flute, long neck model
MISUMI
Long neck radius that can be used as a ball and allows a large pick feed
- Volume Discount
- TS
- General Steel
- 2 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 0.2 ～ 6 0.05 ～ 1 0.16 ～ 12 2 40 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 6 1 ～ 40 Groove For High Hardness (Silicon Group) Long-Neck Radius Standard torsion (30-40°) ±0.005 ～ ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck radius end mill, 4-flute / long neck model
MISUMI
[Features]·Radius (R) accuracy of ±5 µm (compared to the manufacturer measurements) enables high precision deep cavity milling·By adopting 4-flute shape, it is possible to process at high feed setting compared to 2-flute·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 4 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 6 0.05 ～ 1 1.5 ～ 9 4 50 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 6 3 ～ 40 Groove For High Hardness (Silicon Group) Long-Neck Radius Standard torsion (30-40°) ±0.005 From: 852,440 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model
MISUMI
[Features]·Suppresses chattering by adopting short flute length and back taper shape on peripheral edge·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- General Steel
- 2 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 0.2 ～ 3 0.05 ～ 0.5 0.16 ～ 6 2 40 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 6 1 ～ 60 Groove For High Hardness (Silicon Group) Tapered neck radius Standard torsion (30-40°) ±0.005 ～ ±0.01 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model
MISUMI
By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.8 ～ 2 4.5 ～ 18 3 80 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 6 ～ 16 24 ～ 105 Groove For High Hardness (Silicon Group) Tapered neck radius Powerful Torsion (45°-60°) ±0.02 From: 1,765,979 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type
MISUMI
The popular radius type for stainless steel processing is also effective in preventing chipping
- Volume Discount
- TS
- SUS
- 3 Flutes
- S (Short)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.5 ～ 2 7 ～ 18 3 60 ～ 100 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] 6 ～ 12 - Groove For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±0.02 From: 2,257,675 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model
MISUMI
In addition to the standard products, the radius can be selected extensively for manufactured products
- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- R (Regular)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 12 0.2 ～ 1 5 ～ 36 2 40 ～ 80 Aluminum[◎] / Copper[○] / Resin[○] 4 ～ 12 23 ～ 50 Groove DLC radius Powerful Torsion (45°-60°) ±0.01 ～ ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model
MISUMI
Non-coated manufactured products can be shipped on the 5th day in addition to the stocked products
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- R (Regular)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 12 0.2 ～ 1 5 ～ 36 2 40 ～ 80 Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] 4 ～ 12 23 ～ 50 Groove Non-Coated radius Powerful Torsion (45°-60°) ±0.01 ～ ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
MISUMI
Radius type that's also effective in preventing cutter marks
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- R (Regular)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 12 0.2 ～ 1 5 ～ 36 3 40 ～ 80 Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] 4 ～ 12 23 ～ 50 Groove Non-Coated radius Powerful Torsion (45°-60°) ±0.01 ～ ±0.02 Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model
MISUMI
Small radius type that prevents cutter marks on resin
- Volume Discount
- Non-Coated
- Resin
- 2 Flutes
- R (Regular)
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 10 0.2 3 ～ 30 2 50 ～ 80 Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] 3 ～ 10 - Groove Non-Coated radius Standard torsion (30-40°) ±0.02 From: 964,625 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model
MISUMI
[Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed·Long neck type is ideal for deep cavity milling of deep pockets, etc.·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 4 ～ 12 1 ～ 2 8 ～ 24 3 70 ～ 140 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] 4 ～ 12 28 ～ 90 Groove For High Hardness (Silicon Group) Long-Neck Radius Powerful Torsion (45°-60°) ±0.015 From: 1,847,095 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· 45° radius end mill capable of high-speed and high-efficiency machining
- Volume Discount
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 12 0.2 ～ 1 7.5 ～ 38 4 45 ～ 100 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] 3 ～ 12 - Groove For High Hardness (Silicon Group) radius Powerful Torsion (45°-60°) ±20 From: 1,497,250 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· 4-flute radius end mill that achieves high feed/high speed machining
- Volume Discount
- High-Hardness Steel
- 4 Flutes
- SR
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 3 ～ 10 0.2 ～ 1.5 7.5 ～ 30 4 45 ～ 80 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] 3 ～ 10 - Groove For High Hardness (Silicon Group) radius Standard torsion (30-40°) ±10 From: 727,236 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TSC Series Carbide Uneven Lead 4-Flute Radius End Mill
MISUMI
Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)
- Volume Discount
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 2 ～ 25 0.2 ～ 6.5 4 ～ 50 4 50 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] 6 ～ 25 - Groove For High Hardness (Silicon Group) radius Other ±0.02 From: 1,010,709 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 2-Flute Radius End Mill
MISUMI
[Features]·Cutting edge radius also reinforced cutting edge rigid·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted·Can process heat-treated steel up to 50HRC·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 12 0.1 ～ 3 2.5 ～ 30 2 50 ～ 130 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 6 ～ 12 - Groove - radius - - From: 1,133,947 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 4-Flute Uneven Lead Radius End Mill
MISUMI
[Features]·Suppresses chattering with unequal lead and unequal flutes·Stable machining is possible while maintaining finished surface accuracy·Cutting edge radius also reinforced cutting edge rigid·Can process heat-treated steel up to 50HRC·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1.5 ～ 12 0.2 ～ 3 4 ～ 30 4 50 ～ 150 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] 6 ～ 12 - Groove - radius - - From: 1,099,574 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 2-Flute Long Neck Radius End Mill
MISUMI
[Features]·Effective for deep cutting due to long neck type·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted·Can process heat-treated steel up to 50HRC·Cutting edge radius also reinforced cutting edge rigid·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 0.4 ～ 12 0.1 ～ 1 0.6 ～ 18 2 40 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 12 2 ～ 50 Groove - Long-Neck Radius - - From: 890,809 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill
MISUMI
[Features]·Effective for deep cutting due to long neck type·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted·Can process heat-treated steel up to 50HRC·Cutting edge radius also reinforced cutting edge rigid·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) R Size(mm) Blade length (ℓ)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Shank diameter (d)(mm) Underneck length (ℓ1)(mm) Machining Application Coating Type Torsion Angle (θ) R Precision(μm) 1 ～ 12 0.2 ～ 1 1.5 ～ 30 4 50 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] 4 ～ 12 4 ～ 50 Groove - Long-Neck Radius - - From: 938,352 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Blade diameter (D)(φ) |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Type |
| Torsion Angle (θ) |
| R Precision(μm) |
You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product SeriesDòng sản phẩm | Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill | (Economy series) XAL series carbide radius end mill, 2-flute / short model | TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, 3-flute, 45° spiral / regular model | DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model | TSC series carbide radius end mill, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model | TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model | Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model | XAL series carbide radius end mill, 3-flute, 45° torsion / regular model | XAL series carbide radius end mill, 4-flute, 45° torsion / regular model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model | TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type | TSC series carbide long neck radius end mill, 2-flute, long neck model | TSC series carbide long neck radius end mill, 4-flute / long neck model | TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model | TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model | TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type | DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model | Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model | Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model | Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model | TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model | VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill | ||||||||||||
| From | - | 442,479 VND- | 1,564,545 VND- | - | - | - | - | - | - | 1,801,712 VND- | 26,499,735 VND | 3,002,853 VND- | 2,361,520 VND- | - | - | 1,742,415 VND- | 1,699,876 VND- | - | 931,471 VND- | - | - | 852,440 VND- | - | 1,765,979 VND- | 2,257,675 VND- | - | - | - | 964,625 VND- | 1,847,095 VND- | 1,497,250 VND- | 727,236 VND- | 1,010,709 VND- | 1,133,947 VND- | 1,099,574 VND- | 890,809 VND- | 938,352 VND- |
| Days to ShipSố ngày giao hàng | 6 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Blade diameter (D)(φ) | 2 ～ 20 | 1 ～ 12 | 3 ～ 12 | 3 ～ 20 | 1 ～ 20 | 2 ～ 12 | 3 ～ 12 | 1 ～ 12 | 1 ～ 4 | 5 ～ 22 | 4 ～ 10 | 4 ～ 12 | 4 ～ 12 | 0 ～ 16 | 10 | 2 ～ 12 | 2 ～ 12 | 3 ～ 12 | 2 ～ 12 | 1 ～ 20 | 0.2 ～ 6 | 1 ～ 6 | 0.2 ～ 3 | 3 ～ 12 | 3 ～ 12 | 2 ～ 12 | 2 ～ 12 | 2 ～ 12 | 1 ～ 10 | 4 ～ 12 | 3 ～ 12 | 3 ～ 10 | 2 ～ 25 | 1 ～ 12 | 1.5 ～ 12 | 0.4 ～ 12 | 1 ～ 12 |
| R Size(mm) | 0.1 ～ 3 | 0.1 ～ 3 | 0.3 ～ 1 | 0.2 ～ 2 | 0.1 ～ 3 | 0.2 ～ 1 | 0.5 ～ 1 | 0.1 ～ 3 | 0.2 ～ 1 | 0.5 ～ 2 | 0.3 ～ 1 | 0.813 ～ 2.438 | 0.813 ～ 2.438 | 0.2 ～ 2 | 0.3 | 0.5 ～ 2 | 0.5 ～ 2 | 0.3 ～ 2 | 0.2 ～ 3 | 0.1 ～ 3 | 0.05 ～ 1 | 0.05 ～ 1 | 0.05 ～ 0.5 | 0.8 ～ 2 | 0.5 ～ 2 | 0.2 ～ 1 | 0.2 ～ 1 | 0.2 ～ 1 | 0.2 | 1 ～ 2 | 0.2 ～ 1 | 0.2 ～ 1.5 | 0.2 ～ 6.5 | 0.1 ～ 3 | 0.2 ～ 3 | 0.1 ～ 1 | 0.2 ～ 1 |
| Blade length (ℓ)(mm) | 4 ～ 60 | 3 ～ 30 | 4.5 ～ 18 | 5 ～ 56 | 2 ～ 40 | 5 ～ 36 | 4.5 ～ 18 | 1.5 ～ 18 | 0.8 ～ 3.2 | 9 ～ 33 | 10 ～ 25 | 8 ～ 24 | 8 ～ 24 | 16 ～ 48 | - | 2 ～ 12 | 4 ～ 24 | 5 ～ 26 | 3 ～ 18 | 3 ～ 60 | 0.16 ～ 12 | 1.5 ～ 9 | 0.16 ～ 6 | 4.5 ～ 18 | 7 ～ 18 | 5 ～ 36 | 5 ～ 36 | 5 ～ 36 | 3 ～ 30 | 8 ～ 24 | 7.5 ～ 38 | 7.5 ～ 30 | 4 ～ 50 | 2.5 ～ 30 | 4 ～ 30 | 0.6 ～ 18 | 1.5 ～ 30 |
| Number of flutes(sheet) | 2 | 2 | 3 | 3 | 2 | 3 | 3 | 2 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 3 | 3 | 3 | 2 | 2 | 2 | 4 | 2 | 3 | 3 | 2 | 2 | 3 | 2 | 3 | 4 | 4 | 4 | 2 | 4 | 2 | 4 |
| Overall Length (L)(mm) | 40 ～ 125 | 50 ～ 75 | 40 ～ 65 | 60 ～ 130 | 40 ～ 110 | 40 ～ 80 | 60 ～ 100 | 40 ～ 75 | 45 ～ 70 | 80 ～ 200 | 50 ～ 80 | 50 ～ 100 | 80 ～ 160 | 60 ～ 110 | 90 | 50 ～ 100 | 50 ～ 100 | 60 ～ 100 | 35 ～ 60 | 45 ～ 125 | 40 ～ 100 | 50 ～ 100 | 40 ～ 100 | 80 ～ 160 | 60 ～ 100 | 40 ～ 80 | 40 ～ 80 | 40 ～ 80 | 50 ～ 80 | 70 ～ 140 | 45 ～ 100 | 45 ～ 80 | 50 ～ 120 | 50 ～ 130 | 50 ～ 150 | 40 ～ 100 | 50 ～ 110 |
| work material | general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○/◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Shank diameter (d)(mm) | 4 ～ 20 | 4 ～ 12 | 6 ～ 12 | 6 ～ 20 | 4 ～ 20 | 4 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 6 | 4 ～ 20 | 4 ～ 10 | 6 ～ 12 | 6 ～ 12 | 6 ～ 16 | 10 | 4 ～ 12 | 4 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 6 ～ 16 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 3 ～ 10 | 4 ～ 12 | 3 ～ 12 | 3 ～ 10 | 6 ～ 25 | 6 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 |
| Underneck length (ℓ1)(mm) | - | - | - | 26 ～ 92 | 17 ～ 45 | 23 ～ 50 | 14 ～ 68 | 14 ～ 45 | 6 ～ 30 | - | - | - | 35 ～ 108 | - | - | - | - | 18 ～ 70 | - | 23 ～ 55 | 1 ～ 40 | 3 ～ 40 | 1 ～ 60 | 24 ～ 105 | - | 23 ～ 50 | 23 ～ 50 | 23 ～ 50 | - | 28 ～ 90 | - | - | - | - | - | 2 ～ 50 | 4 ～ 50 |
| Machining Application | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove |
| Coating | For High Hardness (Silicon Group) / Non-Coated | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | DLC | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | DLC | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | - | - | - |
| Type | radius | radius | radius | radius | radius | radius | radius | radius | Long-Neck Radius | radius | radius | High-Feed Radius | High-Feed Radius | radius | - | High-Feed Radius | High-Feed Radius | radius | radius | radius | Long-Neck Radius | Long-Neck Radius | Tapered neck radius | Tapered neck radius | radius | radius | radius | radius | radius | Long-Neck Radius | radius | radius | radius | radius | radius | Long-Neck Radius | Long-Neck Radius |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | - | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Other | - | - | - | - |
| R Precision(μm) | ±0.02 | ±0.02 | ±0.01 | ±0.01 | ±0.01 ～ ±0.02 | ±0.02 | ±0.01 | ±0.01 ～ ±0.02 | ±0.005 ～ ±0.01 | ±0.02 | ±10 | - | - | ±0.02 | 10 | ±0.015 | ±0.015 | ±0.01 | ±0.01 | ±0.01 ～ ±0.02 | ±0.005 ～ ±0.01 | ±0.005 | ±0.005 ～ ±0.01 | ±0.02 | ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.02 | ±0.015 | ±20 | ±10 | ±0.02 | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
R Size(mm)
- R0
- 0.02
- R0.02
- 0.03
- 0.05
- R0.05
- 0.1
- R0.1
- 0.15
- R0.15
- 0.2
- R0.2
- 0.25
- R0.25
- 0.3
- R0.3
- 0.4
- 0.5
- R0.5
- 0.6
- 0.7
- 0.75
- 0.76
- 0.8
- 0.813
- 0.9
- 1
- R1
- R1.0
- 1.1
- 1.2
- 1.219
- 1.3
- 1.4
- 1.5
- R1.5
- 1.6
- 1.625
- 1.7
- 1.8
- 1.9
- 2
- R2.0
- R2
- 2.031
- 2.1
- 2.2
- 2.3
- 2.4
- 2.438
- 2.465
- 2.5
- R2.5
- 2.6
- 2.607
- 2.7
- 2.8
- 2.9
- 3
- R3.0
- R3
- 3.05
- 3.2
- 3.5
- R3.5
- 4
- R4.0
- R4
- 5
- R5
- 6
- R6
- 6.35
- 6.5
- 8
[0.1-3/0.1mm Unit(s)]
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.45
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.25
- 1.4
- 1.44
- 1.5
- 1.6
- 1.75
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 3.8
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 24
- 25
- 25.5
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 64
- 75
- 80
- 100
[5-56/1mm Unit(s)]
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Torsion Angle (θ)
-
R Precision(μm)
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy