Screwdrivers

• You can add up to 6 items per a category to the compare list. Compare

  

  Plated Bit (VESSEL / BW)

  VESSEL

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Phillips (+)/Flathead(-)	-	-	65 ～ 110	Set Product	-	-	-	-	-	-	-	-

  From: 719,980 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  Interchangeable Screwdriver, No.220W-3 Ball Grip

  VESSEL

  [Features]・ A ball grip that can be used by inserting an electric screwdriver bit (width across flats: 6.35 mm) and a set of double-ended bits・ A convenient set of cross-head 1 and cross-head 3, a straight-slot blade that can be used for quick-connect terminals and cross-head 2 that is often used, and Pz2 and Pz3 of positive drive, which are often used for assembling imported furniture and binding of snowboards, etc.[Applications]・ For electrical tools, furniture assembly, maintenance, vehicle installation, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  -	-	-	-	Set Product	-	-	NA	NA	Resin	-	-	-

  From: 238,000 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Check

  WERA

  A screwdriver set that houses a ratchet handle, frequently used bits, and sockets.[Features]・ It comes with a compact card type case.・ It allows you to tighten screws straight.・ The ergonomically designed handle helps generate greater torque.・ Bits can be inserted without pushing the sleeve of the holder forward.・ The sleeve of the holder can rotate freely, and the bit can be replaced with one hand.・ Its design is delicate and it can be used in narrow spaces or precision work.・ The body is made of steel except for the gears.・ Easy to use with your fingers, and rotation angle is only 6°.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.0 / No.1 / No.2 / No.3	5.5 ～ 6.5	-	Set Product	-	NA	-	-	Resin	-	2.5 ～ 8	-

  From: 4,782,240 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Ball Grip Screwdriver, No. 220

  VESSEL

  [Features]・ The high-resilience cushion grip fits well in the palm while preventing slipping and transmitting strong force.・ The cross-head screwdriver and straight-slot screwdriver can be distinguished by the color on the grip.・ The shaft part uses chrome vanadium steel, and is quenched in its entirety for toughness.・ The straight-slot blade tip has a flat finish that does not interfere with the work when tightening the terminal.・ Work efficiency is improved as the magnet at the tip of both cross-head screwdriver and straight-slot screwdriver holds the screws. ・ The tip has been treated with high-precision black point processing.・ Extra tightening force for screws.・ Color-coded cushion grip for cross-head / straight-slot tip types.・ Ideal for large terminal block screws cross-head No. 3, thin & long shaft design.[Applications]・ For all kinds of screw-fastening work including electrical, plumbing, HVAC, woodworking and various kinds of construction work.[Materials]・ Shaft: Chrome vanadium steel (fully hardened), Handle: Resin.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2	5.5 ～ 6	75 ～ 200	Single Item	Round	Available	NA	NA	Resin	0.8 ～ 0.9	-	-

  From: 75,600 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Precision Screwdriver DM【1-6 Pieces Per Package】

  ENGINEER

  [Features]· Pocket-sized precision screwdriver. · Machine-knurled fine shaft for excellent workability in recesses. [Applications]· For small precision screws used in time pieces, cameras, glasses, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-) / Phillips (+)/Flathead(-)	No.000 / No.00 / No.0 / No.1 / Other	1 ～ 3.5	-	Single Item / Set Product	Square	-	-	-	-	0.2 ～ 0.7	-	-

  From: 27,200 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Screwdriver Set

  MISUMI

  Useful for all work level from DIY projects to commercial factory operations. Perfect for those who are cost-conscious.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.00 / No.0 / No.1	1 ～ 2.5	-	Set Product	Round	Available	NA	NA	Stainless Steel	-	-	-

  From: 151,596 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Offset ratchet set

  ENGINEER

  · This is a set of Phillips, flathead, and hex bits that are frequently used with offset ratchets.· Includes Rapid Turning Mechanism· With magnet

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.00 / No.1 / No.2	4.5、6.0	-	Set Product	-	-	NA	-	-	-	-	-

  From: 574,486 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver Set for Voltage Detection Replacement Set of 6 (for Low Voltage)

  VESSEL

  For voltage testing and maintenance of electrical products and distribution boards in general households or industry.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2	4 ～ 6	-	Set Product	-	-	-	-	Resin	-	-	-

  From: 361,723 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  20170718_Q80【6 Pieces Per Package】

  VESSEL

  [Features]・The grip with crystal shine has an environmentally friendly, vegetable-based crystalline pattern that is resistant to oils and chemicals.・Ideal for work in narrow places.・Overtightening with excessive torque, or optimum screw tightening without excessive torque can be performed.・Color coding with cross-head and straight-slot.・Uses cellulose acetate resin.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	-	-	-	Set Product	-	-	-	-	-	-	-0.9,-1.25,-1.8,-2.3,-3.0,-3.5	-

  From: 362,334 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Screw Feeder VSF-5

  AS ONE

  【Product Specifications】・Model number： VSF-5・Size (mm)： 126 x 182 x 147・Weight (kg)： 2.2・Input voltage, current of electricity： DC15V 0.7A・Applicable screw size： Normal screw/tapping screw M1.0 - M5.0, Screw under-head length maximum 19mm・Screw capacity： 200cc・Accessories： AC adapter (AC100 - 240V 50/60Hz), Stopper (for M1.0 - 2.0 1 piece, for M2.5 - 5.0 1 piece), Rail width front portion adjustment plate 70 x 90 x t0.8, t1.0, t1.2, t1.5, t2.0mm 1 sheet for each, Rail width rear portion adjustment plate 20 x 10 x t0.2mm/2sheets, 20 x 10 x t0.5mm/10 sheets, L type hexagonal wrench・・[Reference movies] (① and ② can be found from the movie icon on the left of the screen.)・▼①： https： //youtu.be/JUP9-ejXpq8・▼②： https： //youtu.be/4CcnaZsQrjA・▼③： https： //youtu.be/A6ktzRlvjm0・▼④： https： //youtu.be/m99b_NaSqzI・▼⑤： https： //youtu.be/4ShXVQlB4Vc・▼⑥： https： //youtu.be/r7hqHlQkLx0・▼⑦： https： //youtu.be/7ku7MkxPqG8・▼⑧： https： //youtu.be/3W6a7hNFk_M・▼⑨： https： //youtu.be/eVIsZPYtZkg・▼⑩： https： //youtu.be/TIzdsiYZUL4・▼⑪： https： //youtu.be/0Ms5Q0GQ0Ac・▼⑫： https： //youtu.be/pAQtHFxK5Lk・▼⑬： https： //youtu.be/RG66mDqDguI

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  -	-	-	-	-	-	-	-	-	-	-	-	-

  From: 24,153,383 VND
  Days to Ship: Số ngày giao hàng: 16 Day(s) or more

  16 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Replacement Power Screwdriver (Incorporating Magnet)

  ANEX

  [Features]· A replacement type screwdriver which can be used with a screwdriver bit (subtense 6.35 mm hex shaft).· The rear end of the handle can be used for turning eye bolts and thumb screws.· The slotted part of the bit has a special shape that can be inserted into the removal hole of the terminal.[Applications]· + No. 2, -6 screwdriver· Piston Rotation· Wiring remover to be inserted in the terminal removing hole

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	6	135	Single Item	Square	Available	-	-	Rubber	-	-	-

  From: 192,098 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Swiss Grip Hex Screwdriver

  PB SWISS TOOLS

  Hex bar screwdriver made from 2 new materials: polypropylene and santoprene.[Features]· The symbol and size of the driver tip shape are shown on the rear of the handle.· A screwdriver suited for the task can be selected quickly. Boasts an extremely high finishing dimensional accuracy of 1/100 mm.· The handle shape features the same ergonomic design as the Multi-craft.· The carefully selected surface material is close to the hardness of human hands, making it feel soft and warm.· With a special surface structure, the handle can be grasped firmly even with wet hands.· Resistant to oil and gasoline, allowing it to be easily cleaned. Heat resistance of 140°C.[Applications]· Convenient for high-tech fields, assembly lines, and home use. Ideal for rapid turning.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Hexagon	-	-	70 ～ 180	Single Item	Round / Square	NA	NA	NA	Resin	-	1.5 ～ 8	-

  From: 291,205 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hex wrench bit

  TRUSCO NAKAYAMA

  [Features]· A bit with hexagonal tip.· A bit with shaft diameter of 6.35 mm.· Can also be used on ratchet screwdrivers.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Hexagon	-	-	-	Single Item	-	NA	-	-	-	-	-	-

  From: 50,000 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (+)(-) Power Grip Screwdriver Set EA557AB-6

  ESCO

  【Product Specifications】・(+)Tip x Shaft dia, Shaft L ,Length…#1 x 5.5mm x 75mm x 160mm,#2 x 6.3mm x 100mm x 210mm,#2 x 6.3mm x 150mm x 252mm・(-)Blade W x T,Shaft L,Length…5.5 x 0.8mm x 75mm x 160mm,6.0 x 0.9mm x 100mm x 210mm,6.0 x 0.9mm x 150mm x 252mm

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  -	-	-	-	-	-	-	-	-	-	-	-	-

  From: 929,896 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s)

  10 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Master Grip Screwdriver Set DR-52

  ENGINEER

  Master grip screwdriver set equipped with powerful bit containing magnet that is frequently used.[Features]・ It is ideal for rechargeable and electric screwdrivers・ Bit is made of chrome vanadium steel・ Burette type bit holder is convenient for carrying・ Cushion grip that fits well in the hand[Applications]・ For tightening and removing various screws

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.0 / No.1 / No.2	6	-	Set Product	Square	Available	-	-	Rubber	-	-	-

  From: 742,496 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver with Anti-Drop Ring

  ANEX

  The cord does not tangle, even when the handle is turned by the rotating cap. With ring for attaching fall prevention cord. Ideal for work in high places.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	6	100 ～ 150	Single Item	Round	NA	NA	NA	Rubber	-	-	-

  From: 331,505 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Screwdriver Set - 12 pcs

  WERA

  12-piece set of micro screwdrivers.[Features]・ Uses an ergonomic handle that is ergonomically easy to hold, easy to rotate, and reliably transmits torque.・ It allows you to tighten screws straight.・ With a zone that can rotate quickly.・ With the aim (hexagonal) for precise adjustment.・ Designed to transmit stronger torque with your fingers.・ With a sturdy pouch.・ Manufacturing country: Czech.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.00 / No.0	1.5 ～ 3	-	Set Product	Round	NA	NA	NA	Rubber	-	0.9 ～ 2	-

  From: 3,026,308 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  No.225 Ball Grip Screwdriver (With Shaft Cover)

  VESSEL

  Ball grip screwdriver with shaft cover for preventing short-circuits.[Features]· Shaft is covered with resin.· Abundant tightening torque for screws. Cushion grip.· Comes with a marking of Phillips or flathead for instant identification.[Applications]· For various screw fastening work.· For terminal blocks, distribution boards, telegraphy/telephony, air conditioning, renovations, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	6	100 ～ 150	Single Item	Round	Available	NA	NA	Rubber	0.9	-	-

  From: 103,200 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver, Electric Test Driver (-) 100-380V FKD-01

  FUJIYA

  A 6-piece set of precision screwdrivers. [Features]]· The handle is made of brass material with superior rust-proof properties. ]· By using the "rotating head," screwdrivers can be quickly and easily rotated for detailed work. ][Applications]]· For assembling and repairing glasses, watches, cameras, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	-	-	Single Item	-	-	-	-	-	-	-	-

  From: 161,609 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Electric Screwdriver D-331/D-332

  HOZAN

  An electric screwdriver equipped with a cushioned handle that is highly effective for slip prevention.[Features]· Elastomer resin is used for slip prevention of the handle component.· Tightly fits on to the handle body and exhibits excellent gripping performance.· Has a handle shape that makes pressing the screwdriver against screws easy so that force can be transferred well.· The tip has been magnetically processed to hold screws and the handle is made of polypropylene resin and is lightweight.· A design without plating in order to avoid changes in tip precision.[Applications]· Ideal for screw tightening work in deep and narrow spaces.· Electric type screwdriver that can be easily pushed and turned, recommended for the Licensed Electrician Proficiency Test.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	6	100 ～ 150	Single Item	Round	Available	NA	NA	Rubber	1	-	-

  From: 253,555 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Slit Power Screwdriver (Electric Type With Magnet)

  ANEX

  [Features]· Non-slip, powerful slit shape and hexagon shape (grip end).

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2	5.5 ～ 6	75 ～ 200	Single Item	Round	Available	NA	NA	Rubber	-	-	-

  From: 130,228 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  No.9900 Micro Screwdriver

  VESSEL

  Straight type blade tip microdriver.[Features]· The handle has a rotary cap for quick turning. The cutting edge has undergone high precision black point processing.· Fully quenched Chrome Vanadium Steel.[Applications]· For adjustment and repair of precision instruments, electrical equipment, glasses, watches, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.00 / No.0	1.8 ～ 3	50 ～ 150	Single Item	Round	NA	NA	NA	Resin	0.25 ～ 0.45	-	-

  From: 56,430 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SoftBall Grip Screw Driver

  SMATO

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	-	-	100 ～ 200	Single Item	Round	-	-	-	Rubber	-	-	-

  From: 300,655 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  (+)(-) Precision Screwdriver Set EA552GC

  ESCO

  【Product Specifications】・Full length-70 to 120mm・(+)Screwdriver-#0000, #000, #00, #0, #1・(-)Screwdriver-1.0, 1.2, 1.4, 1.8, 2.4, 3.0mm

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  -	-	-	-	-	-	-	-	-	-	-	-	-

  From: 393,318 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Grip Screwdriver (Through)

  TONE

  [Features]· Ergonomic design· Designed to fit the hand for applying force easily.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3	-	75 ～ 150	Single Item	Square	Available	Available	Included	Resin	-	-	-

  From: 190,303 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Screwdriver 6-Piece Set D-20

  HOZAN

  Highly versatile precision screwdriver set. [Features]· (+) No. 0 / (+) No. 1 / (-) 1.2 × 0.32 / (-) 1.8 × 0.32 / (-) 2.3 × 0.35 / (-) 3.0 × 0.45 set. · Stitched fabric case included [Applications]· Highly efficient rotating head type. Ideal for turning small screws quickly.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-) / Phillips (+)/Flathead(-)	No.0 / No.1	1.2 ～ 3	-	Single Item / Set Product	Round	NA	NA	NA	Stainless Steel	0.32 ～ 0.45	-	-

  From: 71,863 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Superfit Double-Ended Precision Replacement Screwdriver Set

  ANEX

  [Features]· A high-strength type with an elastomer resin handle.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.000 / No.00 / No.0 / No.1	1.8 ～ 3	-	Set Product	Square	NA	-	-	Resin	-	-	-

  From: 453,600 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  Strong Square Pass-Through Shank Screwdriver (Pass-Through, Magnetic)

  HIRAI KOGU

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2 / No.3	6 ～ 8	100 ～ 150	Single Item	Square	Available	Available	NA	Resin	0.9 ～ 1.1	-	-

  From: 137,343 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Pin Vise K-501

  HOZAN

  Vise driver for grasping small diameter drills and rotating them, and grasping pin (rod) shaped objects securely.[Features]· Features a rotary head with embedded ball bearings, which offers great workability.· Vise for small diameter drills with rotating cap.· It can be smoothly rotated while pushing in the vertical direction.· With non-slip knurled grip, it is unlikely to slip and easy to rotate. It also has a thick body that makes it easy to apply force.· It has built-in collets with 4 sizes that can be exchanged to correspond to a wide range of drill diameters.· The inner collet and main body are throughcut, allowing even long objects to be inserted and fixed to the back depending on the diameter.[Applications]· It can also be used for etching by grasping a needle (probe), etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  -	-	-	-	Single Item	-	-	-	-	-	-	-	-

  From: 526,976 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Driver

  ENGINEER

  Standard-type Phillips screwdrivers and flathead screwdrivers.[Features]· Selection of various sizes is enabled in accordance with work applications.[Applications]· For work tightening and removing Phillips screws/flathead screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.00 / No.0 / No.1 / No.2	2.6 ～ 5.5	50 ～ 150	Single Item	Round	NA	NA	NA	Resin	0.35 ～ 0.7	-	-

  From: 19,040 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  

  Rubber Grip Screwdriver (Magnetic)【1-4 Pieces Per Package】

  HIRAI KOGU

  [Features]· Strong cushion grip enables excellent tightening force.· (+) No. 2 x 100, (-) 6.3 x 100 shaft with knurling for fast turning and easy filing.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-) / Phillips (+)/Flathead(-)	No.1 / No.2	5.5 ～ 6.3	100 ～ 250	Single Item / Set Product	Round	Available	NA	NA	Rubber	0.7 ～ 0.9	-	-

  From: 152,950 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Resin Handle T-Shaped Tamper Proofing Torx® Screwdriver【1-11 Pieces Per Package】

  KTC(KYOTO TOOL)

  [Features]· Using the hexagon affixed to the base of the shaft, a wrench can be used to aid in turning.· Tip shape can be determined by size display on grip end.[Applications]· General purpose tool

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx	-	-	75 ～ 150	Single Item / Set Product	Square	NA	NA	Included	Resin	-	-	-

  From: 499,573 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ratchet Driver Set RDS20

  TONE

  A set of 2 types of handles, 3 sized replacement bit holders and 20 frequently used bits.[Features]· Left and right switching can be done by simply turning the change knob.· The grip shape can be changed between 2 types according to the work.· The bit holder has a one-touch bit release mechanism.· Grip component of the screwdriver comes with a magazine that can store 6 bits.[Applications]· For maintenance of automobiles, motorcycles, bicycles, etc. and maintenance of industrial equipment, etc.· Ideal for a wide range of maintenance work.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	5.5 ～ 8	-	Set Product	Square	Available	-	-	Resin	-	-	-

  From: 2,560,305 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Ratchet Screwdriver No.2200

  VESSEL

  A ball grip ratchet screwdriver that makes it easy to apply force and protects hands from pain.[Features]· Equipped with a 36-tooth gear ratchet to achieve fine feed and comfortable work.· Shaft cover prevents short-circuit accidents and convenient for terminal block works with fine-shaft specification.· Shaft uses bit material and is fully quenched. Replaceable.[Applications]· For terminal blocks, distribution boards, telegraphy/telephony, air conditioning, renovations, etc.· For various screw fastening work.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.2	-	100	Single Item	Round	-	NA	-	-	-	-	-

  From: 258,400 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Cross Handle Hex Key

  PB SWISS TOOLS

  A cross-handle hex screwdriver that is easy to handle and apply force.[Features]·The grip that fits in your hand is shaped to fit your hand.·The grip end has a convenient shaft for quick turning, so you can turn it with your fingertips.[Applications]·Ideal for when you want to apply torque in a narrow space.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Hexagon	-	-	200	Single Item	-	-	-	-	-	-	2 ～ 8	-

  From: 430,760 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Screw Removal Driver Handle DZ-70

  ENGINEER

  [Features]· An ergonomically designed driver that produces powerful torque.· Since it penetrates the iron core of φ10 mm, the impact of the hammer is transmitted to the tip as it is.· With a bolster, high torque can be output by using a wrench or the like.· A driver bit with a bit insertion depth of 33 mm and a total length of 50 mm or more can be used.· The insertion port has a small gap with the bit due to high precision processing, and suppresses blurring during work.[Use]· For attaching and detaching various screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  -	-	-	-	-	-	-	-	-	-	-	-	-

  From: 348,334 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  SUS Screwdriver Set SD8

  TONE

  An 8-piece all-stainless steel screwdriver set, which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.[Features]· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.[Applications]· Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.· Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.1 / No.2 / No.3	5.5 ～ 8	35 ～ 150	Set Product	Round	NA	NA	NA	Stainless Steel	0.8 ～ 1.1	-	-

  From: 7,597,113 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Replacement Screwdriver Set DK-05 – 08【1-7 Pieces Per Package】

  ENGINEER

  Interchangeable screwdriver set.[Features]・ DK-05 and 06 have low-voltage test grip (AC80 to 300 V／DC100 to 250 V)・ If the tip of the screwdriver touches the target and the head of the handle is pressed with your finger, the neon tube built in will light up[Applications]・ It is convenient for repair and maintenance work

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-) / Box / Combination	No.00 / No.0 / No.1 / No.2 / No.3	3.5 ～ 5.5	-	Set Product	Round	NA	-	-	Resin	-	4 ～ 10	-

  From: 432,076 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  Screwdriver, Rapid Screw Extractor

  ENGINEER

  Special screwdriver type tool dedicated for removing countersunk screws that could not be gripped with a NEJI-SAURUS.[Features]・ It comes with a bit that can be used in places where you cannot hit (DBZ-51)・ It includes a bit corresponding to a hex socket head screw when the groove is flat (DBZ-53)・ It comes with 2 rubbers for finger-friendly shock absorption・ With dedicated grip for high torque[Applications]・ It can be used for countersunk screws

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Hexagon / Combination	No.1 / No.2	-	105	Single Item / Set Product	-	-	-	-	-	-	-	-

  From: 218,960 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Ratchet Screwdriver

  VESSEL

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  -	-	-	-	-	-	-	-	-	-	-	-	-

  From: 278,700 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Crystalline Screwdriver (Stubby Type) No. 6200

  VESSEL

  A stubby screwdriver that's ideal for narrow spaces.[Features]· The grip is made of plant-derived crystalline that's eco-friendly and resistant to oil and chemicals.· Capable of optimum screw tightening without overtightening due to excessive torque or torque shortage.· Color-coded by Phillips or flathead.· Cellulose acetate resin is used.[Applications]· Work in narrow areas.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2	6	38	Single Item	Round	Available	NA	NA	Resin	0.9	-	-

  From: 88,867 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Heavy-Duty Tang-Thru Screwdriver No. 100

  VESSEL

  High strength through screwdriver with a wooden handle that gives a luxurious feeling and also a large nut.[Features]· Wooden handle through-type with a thick nut.· It is easy to grip with a large outer diameter and long handle length.· The blade tip has been black-point processed.[Applications]· For various screw fastening work.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3	5.5 ～ 8	75 ～ 300	Single Item	Round	Available	Available	NA	Wooden handle	0.8 ～ 1.1	-	-

  From: 158,742 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Split Grip Screwdriver (Through) YMD-150

  TONE

  A flathead screwdriver with improved strength thanks to a thicker and longer shaft.[Features]· Designed for power with shaft and handle fixing.[Applications]· Ideal for maintenance of machinery, automobiles, motorcycles, and bicycles.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	10	150	Single Item	Square	NA	Available	NA	Resin	1.2	-	-

  From: 493,759 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Miniature Screwdriver

  ENGINEER

  Select Phillips or flathead

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.000	1.6	30	Single Item	Round	NA	NA	NA	Resin	0.3	-	-

  From: 13,260 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  Annex precision screwdriver

  ANEX

  Convenient for disassembling watches and eyeglasses, and for screwing precision instruments, etc.Comes with a rotating cap.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-) / Phillips (+)/Flathead(-) / Torx / Box / Other	No.00 / No.0 / No.1	0.6 ～ 2.1	5 ～ 24	Single Item / Set Product	Round	NA	NA	NA	Stainless Steel	-	-	-

  From: 38,420 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Tip standards
Tip size / Phillips (+)
Tip size / flathead (-) blade width (mm) B1
Shaft length L (mm)
Single Product/Set Classification
Shaft type
Magnet
Shaft through
Bolster
Grip Type
Tip size / flathead (-) blade thickness (mm) B2
(Box/Hex/Ball-Point) Width Across Flats (mm)
(Box/Hex/Ball-Point) Width Across Flats (inch)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	VESSEL	VESSEL	WERA	VESSEL	ENGINEER	MISUMI	ENGINEER	VESSEL	VESSEL	AS ONE	ANEX	PB SWISS TOOLS	TRUSCO NAKAYAMA	ESCO	ENGINEER	ANEX	WERA	VESSEL	FUJIYA	HOZAN	ANEX	VESSEL	SMATO	ESCO	TONE	HOZAN	ANEX	HIRAI KOGU	HOZAN	ENGINEER	HIRAI KOGU	KTC(KYOTO TOOL)	TONE	VESSEL	PB SWISS TOOLS	ENGINEER	TONE	ENGINEER	ENGINEER	VESSEL	VESSEL	VESSEL	TONE	ENGINEER	ANEX
Product SeriesDòng sản phẩm	Plated Bit (VESSEL / BW)	Interchangeable Screwdriver, No.220W-3 Ball Grip	Tool Check	Ball Grip Screwdriver, No. 220	Precision Screwdriver DM【1-6 Pieces Per Package】	Precision Screwdriver Set	Offset ratchet set	Screwdriver Set for Voltage Detection Replacement Set of 6 (for Low Voltage)	20170718_Q80【6 Pieces Per Package】	Screw Feeder VSF-5	Replacement Power Screwdriver (Incorporating Magnet)	Swiss Grip Hex Screwdriver	Hex wrench bit	(+)(-) Power Grip Screwdriver Set EA557AB-6	Master Grip Screwdriver Set DR-52	Screwdriver with Anti-Drop Ring	Micro Screwdriver Set - 12 pcs	No.225 Ball Grip Screwdriver (With Shaft Cover)	Screwdriver, Electric Test Driver (-) 100-380V FKD-01	Electric Screwdriver D-331/D-332	Slit Power Screwdriver (Electric Type With Magnet)	No.9900 Micro Screwdriver	SoftBall Grip Screw Driver	(+)(-) Precision Screwdriver Set EA552GC	Power Grip Screwdriver (Through)	Precision Screwdriver 6-Piece Set D-20	Superfit Double-Ended Precision Replacement Screwdriver Set	Strong Square Pass-Through Shank Screwdriver (Pass-Through, Magnetic)	Pin Vise K-501	Standard Driver	Rubber Grip Screwdriver (Magnetic)【1-4 Pieces Per Package】	Resin Handle T-Shaped Tamper Proofing Torx® Screwdriver【1-11 Pieces Per Package】	Ratchet Driver Set RDS20	Ball Ratchet Screwdriver No.2200	Cross Handle Hex Key	Screw Removal Driver Handle DZ-70	SUS Screwdriver Set SD8	Replacement Screwdriver Set DK-05 – 08【1-7 Pieces Per Package】	Screwdriver, Rapid Screw Extractor	Ball Ratchet Screwdriver	Crystalline Screwdriver (Stubby Type) No. 6200	Heavy-Duty Tang-Thru Screwdriver No. 100	Split Grip Screwdriver (Through) YMD-150	Miniature Screwdriver	Annex precision screwdriver
From	719,980 VND	238,000 VND	4,782,240 VND	75,600 VND	27,200 VND Special Price On Sale Till 31/03/2025	151,596 VND	574,486 VND	361,723 VND	362,334 VND	24,153,383 VND	192,098 VND	291,205 VND	50,000 VND	929,896 VND	742,496 VND	331,505 VND	3,026,308 VND	103,200 VND	161,609 VND	253,555 VND Special Price On Sale Till 31/03/2025	130,228 VND Special Price On Sale Till 31/03/2025	56,430 VND	300,655 VND	393,318 VND Special Price On Sale Till 31/03/2025	190,303 VND	71,863 VND	453,600 VND	137,343 VND	526,976 VND	19,040 VND	152,950 VND	499,573 VND	2,560,305 VND	258,400 VND	430,760 VND	348,334 VND	7,597,113 VND	432,076 VND	218,960 VND	278,700 VND	88,867 VND	158,742 VND	493,759 VND	13,260 VND	38,420 VND
Days to ShipSố ngày giao hàng	4 Day(s)	Same day	9 Day(s)	Same day or more	Same day or more	Same day	6 Day(s) or more	9 Day(s)	Same day	16 Day(s) or more	Same day	6 Day(s) or more	Same day or more	10 Day(s)	Same day	9 Day(s)	6 Day(s) or more	Same day or more	Same day	Same day	Same day or more	Same day or more	4 Day(s)	Same day	Same day or more	Same day or more	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	Same day	8 Day(s) or more	9 Day(s)	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	9 Day(s)	Same day or more	9 Day(s)	6 Day(s)	9 Day(s) or more	6 Day(s) or more
Tip standards	Phillips (+) / Phillips (+)/Flathead(-)	-	Combination	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-) / Phillips (+)/Flathead(-)	Phillips (+)/Flathead(-)	Combination	Combination	Combination	-	Phillips (+)/Flathead(-)	Hexagon	Hexagon	-	Phillips (+)/Flathead(-)	Phillips (+) / Flathead (-)	Combination	Phillips (+) / Flathead (-)	Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	-	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-) / Phillips (+)/Flathead(-)	Phillips (+)/Flathead(-)	Phillips (+) / Flathead (-)	-	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-) / Phillips (+)/Flathead(-)	Torx	Combination	Phillips (+)	Hexagon	-	Phillips (+)/Flathead(-)	Phillips (+)/Flathead(-) / Box / Combination	Phillips (+) / Hexagon / Combination	-	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-) / Phillips (+)/Flathead(-) / Torx / Box / Other
Tip size / Phillips (+)	-	-	No.0 / No.1 / No.2 / No.3	No.1 / No.2	No.000 / No.00 / No.0 / No.1 / Other	No.00 / No.0 / No.1	No.00 / No.1 / No.2	No.1 / No.2	-	-	No.2	-	-	-	No.0 / No.1 / No.2	No.2	No.00 / No.0	No.2	-	No.2	No.1 / No.2	No.00 / No.0	-	-	No.1 / No.2 / No.3	No.0 / No.1	No.000 / No.00 / No.0 / No.1	No.2 / No.3	-	No.00 / No.0 / No.1 / No.2	No.1 / No.2	-	No.1 / No.2 / No.3	No.2	-	-	No.1 / No.2 / No.3	No.00 / No.0 / No.1 / No.2 / No.3	No.1 / No.2	-	No.1 / No.2	No.1 / No.2 / No.3	-	No.000	No.00 / No.0 / No.1
Tip size / flathead (-) blade width (mm) B1	-	-	5.5 ～ 6.5	5.5 ～ 6	1 ～ 3.5	1 ～ 2.5	4.5、6.0	4 ～ 6	-	-	6	-	-	-	6	6	1.5 ～ 3	6	-	6	5.5 ～ 6	1.8 ～ 3	-	-	-	1.2 ～ 3	1.8 ～ 3	6 ～ 8	-	2.6 ～ 5.5	5.5 ～ 6.3	-	5.5 ～ 8	-	-	-	5.5 ～ 8	3.5 ～ 5.5	-	-	6	5.5 ～ 8	10	1.6	0.6 ～ 2.1
Shaft length L (mm)	65 ～ 110	-	-	75 ～ 200	-	-	-	-	-	-	135	70 ～ 180	-	-	-	100 ～ 150	-	100 ～ 150	-	100 ～ 150	75 ～ 200	50 ～ 150	100 ～ 200	-	75 ～ 150	-	-	100 ～ 150	-	50 ～ 150	100 ～ 250	75 ～ 150	-	100	200	-	35 ～ 150	-	105	-	38	75 ～ 300	150	30	5 ～ 24
Single Product/Set Classification	Set Product	Set Product	Set Product	Single Item	Single Item / Set Product	Set Product	Set Product	Set Product	Set Product	-	Single Item	Single Item	Single Item	-	Set Product	Single Item	Set Product	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	-	Single Item	Single Item / Set Product	Set Product	Single Item	Single Item	Single Item	Single Item / Set Product	Single Item / Set Product	Set Product	Single Item	Single Item	-	Set Product	Set Product	Single Item / Set Product	-	Single Item	Single Item	Single Item	Single Item	Single Item / Set Product
Shaft type	-	-	-	Round	Square	Round	-	-	-	-	Square	Round / Square	-	-	Square	Round	Round	Round	-	Round	Round	Round	Round	-	Square	Round	Square	Square	-	Round	Round	Square	Square	Round	-	-	Round	Round	-	-	Round	Round	Square	Round	Round
Magnet	-	-	NA	Available	-	Available	-	-	-	-	Available	NA	NA	-	Available	NA	NA	Available	-	Available	Available	NA	-	-	Available	NA	NA	Available	-	NA	Available	NA	Available	-	-	-	NA	NA	-	-	Available	Available	NA	NA	NA
Shaft through	-	NA	-	NA	-	NA	NA	-	-	-	-	NA	-	-	-	NA	NA	NA	-	NA	NA	NA	-	-	Available	NA	-	Available	-	NA	NA	NA	-	NA	-	-	NA	-	-	-	NA	Available	Available	NA	NA
Bolster	-	NA	-	NA	-	NA	-	-	-	-	-	NA	-	-	-	NA	NA	NA	-	NA	NA	NA	-	-	Included	NA	-	NA	-	NA	NA	Included	-	-	-	-	NA	-	-	-	NA	NA	NA	NA	NA
Grip Type	-	Resin	Resin	Resin	-	Stainless Steel	-	Resin	-	-	Rubber	Resin	-	-	Rubber	Rubber	Rubber	Rubber	-	Rubber	Rubber	Resin	Rubber	-	Resin	Stainless Steel	Resin	Resin	-	Resin	Rubber	Resin	Resin	-	-	-	Stainless Steel	Resin	-	-	Resin	Wooden handle	Resin	Resin	Stainless Steel
Tip size / flathead (-) blade thickness (mm) B2	-	-	-	0.8 ～ 0.9	0.2 ～ 0.7	-	-	-	-	-	-	-	-	-	-	-	-	0.9	-	1	-	0.25 ～ 0.45	-	-	-	0.32 ～ 0.45	-	0.9 ～ 1.1	-	0.35 ～ 0.7	0.7 ～ 0.9	-	-	-	-	-	0.8 ～ 1.1	-	-	-	0.9	0.8 ～ 1.1	1.2	0.3	-
(Box/Hex/Ball-Point) Width Across Flats (mm)	-	-	2.5 ～ 8	-	-	-	-	-	-0.9,-1.25,-1.8,-2.3,-3.0,-3.5	-	-	1.5 ～ 8	-	-	-	-	0.9 ～ 2	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	2 ～ 8	-	-	4 ～ 10	-	-	-	-	-	-	-
(Box/Hex/Ball-Point) Width Across Flats (inch)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…