(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
71 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
Stainless Steel Straight Edge Warranty (Product Body and JCSS Calibration Certificate)
SHINWASOKUTEI
A straight stainless steel with a JCSS calibration certificate.[Features]·It is a JIS grade 1 product and has an inch conversion table on the back.·You can choose from six sizes: 15 cm, 30 cm, 60 cm, 1 m, 1.5 m, and 2 m, depending on your intended use.·A certificate that examines and certifies that the technical capabilities and traceability of a business site meet the standards for calibration institution accreditation.[Applications]·Available when used for length measurements.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - |
From: 2,472,375 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) |
You can add up to 6 items per a category to the compare list.
SHINWASOKUTEI
Silver-coated ruler which suppresses surface reflection for easily readable scale.[Features]· JIS Class 1 with an extensive range of sizes (15 cm to 2 m are available).· An etched and plated scale whose performance will not deteriorate over time, even when used under harsh conditions.[Applications]· Ideal for measuring length.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
150 ~ 3000 | Silver | 0.5 ~ 1 | 1 / 0.5 up to 100 mm, Other: 1 | Stainless Steel | Corresponds To | JIS1 Grade | - |
From: 102,403 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
SHINWASOKUTEI
A standard ruler to measure length.[Features]· JIS Class 1 with an extensive range of sizes from 15 cm to 2 m.· Stainless steel material used in its original form.· Inch conversion table on back surface (15 cm to 1 m, no longer than 1.5 m)[Applications]· Ideal for measuring the length of straight lines.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
150 ~ 3000 | Stainless Steel | 0.5 ~ 1 | 1 / 0.5 up to 100 mm, Other: 1 | Stainless Steel | Corresponds To | JIS1 Grade | - |
From: 90,450 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
SHINWASOKUTEI
[Features]· All the scales are width 15 mm x thickness 0.5 mm.[Material]· Stainless steel.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
50 ~ 500 | - | - | - | Stainless Steel | - | - | - |
From: 368,428 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Setting Measuring Tape (With Adhesive Tape)
MURATEC KDS
[Features]・ Scale tape with adhesive tape・ Material thickness (including adhesive tape) 0.3 mm・ You can cut freely・ Numbers are arranged from left to right[Applications]・ Installation on work bench, machine, etc.・ Rust-resistant stainless steel tape (standard scale for outdoor equipment, staff, and aquarium)
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | 1 | Stainless Steel | - | - | - |
From: 276,850 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
BLUEBIRD
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
1,000 ~ 300 | - | 0.5 | 1 | Steel | Non-Compatible | - | - |
From: 237,141 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
ENGINEER
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
0 to 150 ~ 0 to 300 | - | - | - | - | Non-Compatible | - | - |
From: 155,761 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Narrow Width Carpenter's Square Angle Ruler
SHINWASOKUTEI
A ruler for measuring the dimensions of rounded shapes or for adhering to machinery etc.[Features]· A thin, narrow width type.· Same quality as JIS standard products.· Silver-coated for easily readable scale.· Etched and plated scale maintains its performance even under harsh conditions.[Applications]· Ideal for measuring length.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
300 ~ 1500 | Silver | 0.5 ~ 1 | 1 | Stainless Steel | Corresponds To | - | - |
From: 128,700 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Straight Edge: Angle Ruler (Sliver)
TRUSCO NAKAYAMA
[Features]· Scale is easy to see as it is blast finished which limits light reflection.· Etched scale so it is unlikely to fade.· Imperial conversion table and screw pilot hole diameter table included.· JIS Class 1 rated product. (TSU15N to TSU200N)[Applications]· For delineation, scribing procedures, and dimension measurement.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
150 ~ 3000 | Silver | 0.5 ~ 1 | 1 / 0.5 up to 100 mm, Other: 1 | Stainless Steel | Corresponds To | JIS1 Grade | - |
From: 115,606 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]· Since the tip is bent, it is easy to pinch objects.· Imperial conversion table included.· JIS Class 1 rated product.[Applications]· For delineation, scribing procedures, and dimension measurement.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
150 ~ 300 | Stainless Steel | 1 | 1 | Stainless Steel | Corresponds To | JIS1 Grade | - |
From: 127,946 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Straight Ruler (Steel) EA720YY-15
ESCO
【Product Specifications】・Equivalent to JIS top grade ・Width-13mm・Thickness-Approx. 0.3mm (including adhesive tape) ・Tape material-Steel・The tape can be affixed just by removing the backing paper and it also can be cut.・For machine and workbench where dimensionsneed to be checked・Length…5m
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - |
From: 388,281 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
Angle Ruler, 1 mm Vertical Pitch
SHINWASOKUTEI
[Features]· JIS1 Grade.· Inch conversion table on back surface.· Scale: Upper/lower 1 mm pitch.· A 1 mm pitch, easy to read when fine scales are not necessary.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
600 | Silver | 1 | 1 | Stainless Steel | - | JIS1 Grade | - |
From: 754,886 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TOEIKOGYO
[Features]· Scale can be read in 0.1 mm increments and is equipped with a Vernier stopper.· 0.1 mm scale vernier stopper added to JIS Class 1 scale.· 0.4 mm Vernier scale reduces reading errors due to parallax.· A steel plate spring is built into the stopper to keep the scale from wobbling.· Used together with a narrow point scribe needle, it can be used instead of a high gauge.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
0.1~300 ~ 0.1~2000 | Silver | - | - | - | - | JIS1 Grade | - |
From: 1,196,565 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
AS ONE
【Product Specifications】・Model number: 15cm (stain with red numbers JIS)・Size (mm): 175 x 15 x 0.5・Scale: Upper/1mm pitch (15cm - 1m), up to 10cm 0.5mm pitch other 1mm pitch (from 1.5m), Lower/0.5mm pitch (15cm - 1m), 1mm pitch (from 1.5m)・With inch conversion table (back) (15cm - 1m only)・JIS standard product (first grade)
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
0-2000 ~ 0-1500 | - | 1 | 0.5 | - | - | JIS1 Grade | No |
From: 65,340 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Stainless Steel Scale Comfortable Stage Gradations
NIIGATA SEIKI (SK)
[Features]· A newly designed step scale that prevents misreading in millimeters.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
150 ~ 300 | Stainless Steel | - | - | Stainless Steel | - | JIS B7516 | - |
From: 62,370 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Silver Straight Ruler (Straight Ruler / Ruler)
YAMAYO
[Features] · Matte plating on a stainless steel straight ruler. A matte ruler that reduces the eye fatigue. · Easy-to-read red text after every 10 cm (every 5 cm in the 15 cm model). · For inspection, drawing and drafting.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
1,000 ~ 600 | Silver | 1 | 0.5 up to 100 mm, Other: 1 | Stainless Steel | - | JIS1 Grade | - |
From: 656,360 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SHINWASOKUTEI
[Features]· JIS Grade 1 (15 cm – 1 m)· The basic performance is unchanged, with the tip of the scale bent, to make grasping easier· Large, easily readable numbers are adopted[Specifications]· Weights and measures conversion table on back surface.· Scale: Upper/lower 1 mm pitch
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
150 ~ 1000 | Silver | 1 | 1 | Stainless Steel | Corresponds To | JIS1 Grade | - |
From: 55,110 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Scale with Hook, Free-Stage Scale
NIIGATA SEIKI (SK)
Hybrid scale with a hook for convenient use.[Features]· Hook incorporated type for measuring by snagging the workpiece.· A stepped scale with easy-to-see 1 mm graduations has been adopted.· Continuous numbering + 2 mm point scale specifications, so numerical values can immediately be grasped.· Slightly chamfered on the circumference surface so that the product can be safely handled with bare hands.[Applications]· Used for measurement of the dimensions from the end face and simplified measurement of the C chamfer plane.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
150 | Silver | - | - | Stainless Steel | - | - | - |
From: 216,784 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
AS ONE
【Product Specifications】・Model number: 30cm (stain with red numbers JIS)・Size (mm): 335 x 25 x 1.0・Scale: Upper/1mm pitch (15cm - 1m), up to 10cm 0.5mm pitch other 1mm pitch (from 1.5m), Lower/0.5mm pitch (15cm - 1m), 1mm pitch (from 1.5m)・With inch conversion table (back) (15cm - 1m only)・JIS standard product (first grade)
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - |
From: 238,512 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 15 Day(s) |
You can add up to 6 items per a category to the compare list.
NIIGATA SEIKI (SK)
A ruler featuring a newly designed stepped scale which helps prevent user error when taking measurements in mm units. [Features]· Adopts a stepped scale with 1 mm graduations. · The end of the scale is bent, making it easy to grasp with one hand. · Features continuous numbering and a +2 mm point scale for quicker taking of measurements. · Features 0.5 mm graduations, allowing it to be used for even more detailed work. (CU-15KDF only)· The end of the scale is bent, making it easy to grasp with one hand. · Features a silver finish. The outer peripheral surface has been finished with a light chamfer, making it even safer to handle. (JIS B7516 standards)[Applications]· Used for delineation, scribing and measuring dimensions.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
150 ~ 600 | Silver | 0.5 ~ 1 | 1 / 0.5 | Stainless Steel | Corresponds To | JIS1 Grade / JIS B7516 | - |
From: 67,980 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
BLUEBIRD
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
600 | - | 0.5 | 1 | Stainless Steel | Non-Compatible | JIS1 Grade | - |
From: 355,942 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) |
You can add up to 6 items per a category to the compare list.
BLUEBIRD
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
150 ~ 300 | - | - | 1 | Aluminum | Non-Compatible | - | - |
From: 365,162 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) |
You can add up to 6 items per a category to the compare list.
BLUEBIRD
[Description]· An aluminum straight ruler with anti-slip tape made of lightweight aluminum material.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
300 | - | - | - | Aluminum | - | - | - |
From: 317,500 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KOWASHINYAKU
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
150 ~ 2000 | - | - | - | Stainless Steel | - | - | - |
From: 271,677 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Edge: Angle Ruler (with Stopper)
SHINWASOKUTEI
A ruler which can measure not only length but also depth or steps.[Features]· JIS1 Grade.· With red numerals.· With a silver stopper.[Applications]· Ideal for measuring length, depth, or steps.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
150 ~ 300 | Silver | 0.5 | 1 | Stainless Steel | Corresponds To | JIS1 Grade | - |
From: 171,600 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Aluminum Cutter Ruler, Cut Master EX with Handle
SHINWASOKUTEI
[Features]· The cutter surface has a thin stainless steel plate pasted on both sides to help ensure that the blades do not catch.· An incision-free, non-slip rubber has been adopted.· Made of elastomer resin. Adopts an easy-grip, easy-hold handle.· Each scale on the upper and lower levels has a left base point W starting from the edge.· With a foot equivalent scale convenient for carpenters.· Light, non-rusting, and durable.· Large, vivid scale numerals have been adopted.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
600 ~ 1500 | - | - | - | Aluminum | - | - | - |
From: 1,084,256 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
AS ONE
【Product Specifications】・Model number: CU-15KD・Nominal dimensions (mm): 150・Minimum scale (mm): 1・Instrument difference: ±0.15mm・Material: Stainless steel (SUS420J2) (surface silver finish)・Size: 175 x 15 x 0.5mm・Mass: 10g・JIS B7516 standards products
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - |
From: 219,042 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 15 Day(s) |
You can add up to 6 items per a category to the compare list.
AS ONE
【Product Specifications】・Model number: CU-30KD・Nominal dimensions (mm): 300・Minimum scale (mm): 1・Instrument difference: ±0.15mm・Material: Stainless steel (SUS420J2) (surface silver finish)・Size: 335 x 25 x 1mm・Mass: 65g・JIS B7516 standards products
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - |
From: 438,084 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 15 Day(s) |
You can add up to 6 items per a category to the compare list.
AS ONE
【Product Specifications】・Model number: CU-15KDF・Nominal dimensions (mm): 150・Minimum scale (mm): 0.5・Instrument difference: ±0.15mm・Material: Stainless steel (SUS420J2) (surface silver finish)・Size: 175 x 15 x 0.5mm・Mass: 10g・JIS B7516 standards products
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - |
From: 206,873 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 15 Day(s) |
You can add up to 6 items per a category to the compare list.
Nobisuke 3x Magnification 2-Direction Measuring Type Metric Scale
SHINWASOKUTEI
[Features]· Expands to 3 times the length and can be read close by, enabling long distances to be measured easily with just one person.· The stopper is plastic and will not damage the contacting areas.· Large, easily readable scale numbers are adopted.· 2-Direction Type· As it is telescopic in both directions, it is held in the center. Thus it is particularly suitable for measuring inside dimensions by holding the center and extending the rod left and right.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
364-970 ~ 1424-4091 | - | - | - | - | - | - | - |
From: 940,625 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Nobisuke 3x Magnification 2-Direction Measuring Type Combination Scale
SHINWASOKUTEI
[Features]· Expands to 3 times the length and can be read close by.· Long distances can be easily measured even with just one person.· The stopper is plastic and will not damage the contacting areas.· Large, easily readable scale numbers are adopted.· As it is telescopic in both directions, it is held in the center. Thus it is particularly suitable for measuring inside dimensions by holding the center and extending the rod left and right.· For interior work, interior construction, fitting installation, front construction, step mounting, block piling, waterworks, stonework, etc.· A, AB types: For inner dimension measurement of areas with closet storage space, floor cupboards, and crown molding.· B/C/D/E types: For foot measures and span rods (shaku and ken measurements).
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
1909 ~ 3636 | - | - | - | Aluminum | - | - | - |
From: 1,315,164 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aluminum Scale, Fast Level Graduations
NIIGATA SEIKI (SK)
An aluminum scale that adopts an easy-to-see linear scale and step scale with 1 mm increments.[Features]· Two-color printing in blue and red for clearly distinguishable scale marks and lines even in work requiring inking lines.· Center reference point scale markings with the center set to 0, for simple assignment of dimensions to the left and right. (AS-30/AS-60/AS-100)· Non-slip adhesive sheet (excluding AS-15), with grooving groove.[Applications]· For delineation, cutting work, dimension measurement, etc.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
1000 | - | - | - | Aluminum | - | - | - |
From: 419,221 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
[I-Beam] High-class Straight Edge [A-Grade] EA720YS-22
ESCO
【Product Specifications】・Material-Carbon tool steel ・Polishing・Used to test a flatness, parallelism, etc.・Length x Width x Height…500 x 10 x 50mm・Straightness…7μm
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - |
From: 6,076,823 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Edge: Angle Ruler and Measuring Scale in cm Scale
SHINWASOKUTEI
[Features]· A ruler with a foot equivalent scale convenient for carpenters.· When either foot equivalent scale or centimeter scale is on the top level of the main bodyDouble left base point type specification where the base point of the scale is on the end face of the left side. (Product number 13210 top and bottom scale base points are both at the right end.)[Specifications]· Conversion table on back surface Double-left base point type: Weights and measures conversion table on front surface. Right reference point type: Inch conversion table included· Scale: Upper level: 1 mm pitch / Lower level: Ft equivalent
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | 1 | - | - | - | - |
From: 862,602 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aluminum Cutting Ruler Cut Master PROTECT
SHINWASOKUTEI
[Features]· As the protective wall can be folded, it does not intrude when carrying or storing.· The protective wall with a height of 30 mm (35 mm from the cutting surface) protects hands.· With a protective cap, it does not damage materials.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
1,000 ~ 700 | - | - | - | Aluminum | - | - | - |
From: 928,995 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SHINWASOKUTEI
Aluminum box beam straight ruler[Features]· Stable box-type that does not wobble and is not susceptible to distortion.· Includes a protective cap.· With tape which can be written on freely. [Applications]· For checking base alignment straightness of window and door frames.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
1350 ~ 1950 | - | - | - | - | - | - | - |
From: 1,207,285 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NIIGATA SEIKI (SK)
A straight scale with newly designed stepped scale which helps prevent user error when taking measurements in mm units. [Features]· Easy-to-read 1‑mm stepped graduation scale.· Numerical values can be instantaneously identified using the sequential numbering and 2‑mm point graduations.· The 0.5‑mm stepped graduation scale can be used for more detailed work. (CU-15KDF only)· The bent-up scale edge makes the scale easy to pick up with one hand.· Features a satin finish. The edges are finished with a light chamfer for safer handling, even with bare hands.· Includes inspection report, calibration certificate and product traceability diagram. [Applications]· Used for demarcation, scribing and dimension measurement.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
150 | Silver | 0.5 | 0.5 | Stainless Steel | Corresponds To | JIS B7516 | Yes |
From: 2,246,319 VND |
---|
Days to Ship: Số ngày giao hàng: 13 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Aluminum Cutter Ruler, Cut Master EX
SHINWASOKUTEI
The cutter surface has a thin stainless steel plate pasted on both sides to help ensure that the blades do not catch.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
600 ~ 1250 | - | - | - | Aluminum | - | - | - |
From: 736,561 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Straight Edge with Product Warranty (Product Body and JCSS Calibration Certificate)
SHINWASOKUTEI
Silver processing suppresses the surface reflection to make the scale easy to read. An etched and plated scale whose performance will not deteriorate over time, even when used under harsh conditions. Uses Japanese high grade materials.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
150 ~ 2000 | Silver | 0.5 ~ 1 | 1 / 0.5 up to 100 mm, Other: 1 | Stainless Steel | Corresponds To | JIS1 Grade | - |
From: 2,640,000 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) |
You can add up to 6 items per a category to the compare list.
Stainless Steel Straight Ruler EA720YC-100A
ESCO
【Product Specifications】・Stainless steel・Millimeter display・Scale x Width x Thickness…1,000 x 30 x 1.0mm
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - |
From: 1,458,233 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Silver Straight Ruler EA720YD-15
ESCO
【Product Specifications】・One division-0.5mm・Stainless steel・Product in conformity with JIS Standard・Scale x Width x Thickness…150 x 15 x 0.5mm・Specification…-
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - |
From: 150,428 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
AS ONE
【Product Specifications】・Model number: 1m (stain with red numbers JIS)・Size (mm): 1050 x 35 x 1.5・Scale: Upper/1mm pitch (15cm - 1m), up to 10cm 0.5mm pitch other 1mm pitch (from 1.5m), Lower/0.5mm pitch (15cm - 1m), 1mm pitch (from 1.5m)・With inch conversion table (back) (15cm - 1m only)・JIS standard product (first grade)
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - |
From: 1,152,810 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 15 Day(s) |
You can add up to 6 items per a category to the compare list.
AS ONE
【Product Specifications】・Model number: No.100・For 1, 2mm x 100 pieces each・Material: Stainless steel (SUS304)・Size: 90 x 70 x 2mm・JIS K 5600 compliance
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - |
From: 6,969,282 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: 12 Day(s) |
You can add up to 6 items per a category to the compare list.
NIIGATA SEIKI (SK)
[Features]· A newly designed step scale that prevents misreading in millimeters.
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
150 ~ 600 | Silver | - | - | Stainless Steel | - | JIS B7516 | - |
From: 123,916 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Aluminum Ruler, Alusuke (Without Non-Slip Backing)
SHINWASOKUTEI
Safe aluminum ruler with easy-to-see large scale numbers and a protective wall to protect your hands.[Features]・ Adopted large and clear scale numbers·The danger prevention wall prevents the cutter blade from slipping and getting over·With grooving ruler·Lightweight, rust-proof and durable[Applications]·For length measurement, line drawing, grooving, cutting
Measuring Range(mm) | Surface Finish | Scale gradation of the lower level(mm) | Scale gradation of the upper level(mm) | Material | Calibration | JIS | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | - | Aluminum | - | - | - |
From: 77,550 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Measuring Range(mm) |
Surface Finish |
Scale gradation of the lower level(mm) |
Scale gradation of the upper level(mm) |
Material |
Calibration |
JIS |
Calibration Certificate |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | MURATEC KDS | BLUEBIRD | ENGINEER | SHINWASOKUTEI | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | ESCO | SHINWASOKUTEI | TOEIKOGYO | AS ONE | NIIGATA SEIKI (SK) | YAMAYO | SHINWASOKUTEI | NIIGATA SEIKI (SK) | AS ONE | NIIGATA SEIKI (SK) | BLUEBIRD | BLUEBIRD | BLUEBIRD | KOWASHINYAKU | SHINWASOKUTEI | SHINWASOKUTEI | AS ONE | AS ONE | AS ONE | SHINWASOKUTEI | SHINWASOKUTEI | NIIGATA SEIKI (SK) | ESCO | SHINWASOKUTEI | SHINWASOKUTEI | SHINWASOKUTEI | NIIGATA SEIKI (SK) | SHINWASOKUTEI | SHINWASOKUTEI | ESCO | ESCO | AS ONE | AS ONE | NIIGATA SEIKI (SK) | SHINWASOKUTEI |
Product SeriesDòng sản phẩm | Stainless Steel Straight Edge Warranty (Product Body and JCSS Calibration Certificate) | Nobisuke 3x Magnification 2-Direction Measuring Type Metric Scale | Nobisuke 3x Magnification 2-Direction Measuring Type Combination Scale | Straight Edge with Product Warranty (Product Body and JCSS Calibration Certificate) | |||||||||||||||||||||||||||||||||||||||||
From | 2,472,375 VND | 102,403 VND | 90,450 VND | 368,428 VND | 276,850 VND | 237,141 VND | 155,761 VND | 128,700 VND Special Price On Sale Till 31/03/2025 | 115,606 VND | 127,946 VND | 388,281 VND | 754,886 VND | 1,196,565 VND | 65,340 VND Special Price On Sale Till 31/03/2025 | 62,370 VND | 656,360 VND | 55,110 VND | 216,784 VND | 238,512 VND Special Price On Sale Till 31/03/2025 | 67,980 VND | 355,942 VND | 365,162 VND | 317,500 VND | 271,677 VND | 171,600 VND | 1,084,256 VND | 219,042 VND Special Price On Sale Till 31/03/2025 | 438,084 VND Special Price On Sale Till 31/03/2025 | 206,873 VND Special Price On Sale Till 31/03/2025 | 940,625 VND | 1,315,164 VND | 419,221 VND | 6,076,823 VND | 862,602 VND | 928,995 VND | 1,207,285 VND | 2,246,319 VND | 736,561 VND | 2,640,000 VND | 1,458,233 VND | 150,428 VND | 1,152,810 VND Special Price On Sale Till 31/03/2025 | 6,969,282 VND Special Price On Sale Till 31/03/2025 | 123,916 VND | 77,550 VND |
Days to ShipSố ngày giao hàng | 8 Day(s) | Same day or more | Same day or more | 4 Day(s) or more | 9 Day(s) | Same day or more | 9 Day(s) | Same day or more | Same day or more | Same day or more | Same day | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | Same day or more | 9 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 15 Day(s) | Same day or more | 4 Day(s) | 4 Day(s) | 7 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 15 Day(s) | 15 Day(s) | 15 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 13 Day(s) or more | 4 Day(s) or more | 8 Day(s) | 7 Day(s) or more | 9 Day(s) | 15 Day(s) | 12 Day(s) | Same day or more | 9 Day(s) |
Measuring Range(mm) | - | 150 ~ 3000 | 150 ~ 3000 | 50 ~ 500 | - | 1,000 ~ 300 | 0 to 150 ~ 0 to 300 | 300 ~ 1500 | 150 ~ 3000 | 150 ~ 300 | - | 600 | 0.1~300 ~ 0.1~2000 | 0-2000 ~ 0-1500 | 150 ~ 300 | 1,000 ~ 600 | 150 ~ 1000 | 150 | - | 150 ~ 600 | 600 | 150 ~ 300 | 300 | 150 ~ 2000 | 150 ~ 300 | 600 ~ 1500 | - | - | - | 364-970 ~ 1424-4091 | 1909 ~ 3636 | 1000 | - | - | 1,000 ~ 700 | 1350 ~ 1950 | 150 | 600 ~ 1250 | 150 ~ 2000 | - | - | - | - | 150 ~ 600 | - |
Surface Finish | - | Silver | Stainless Steel | - | - | - | - | Silver | Silver | Stainless Steel | - | Silver | Silver | - | Stainless Steel | Silver | Silver | Silver | - | Silver | - | - | - | - | Silver | - | - | - | - | - | - | - | - | - | - | - | Silver | - | Silver | - | - | - | - | Silver | - |
Scale gradation of the lower level(mm) | - | 0.5 ~ 1 | 0.5 ~ 1 | - | - | 0.5 | - | 0.5 ~ 1 | 0.5 ~ 1 | 1 | - | 1 | - | 1 | - | 1 | 1 | - | - | 0.5 ~ 1 | 0.5 | - | - | - | 0.5 | - | - | - | - | - | - | - | - | - | - | - | 0.5 | - | 0.5 ~ 1 | - | - | - | - | - | - |
Scale gradation of the upper level(mm) | - | 1 / 0.5 up to 100 mm, Other: 1 | 1 / 0.5 up to 100 mm, Other: 1 | - | 1 | 1 | - | 1 | 1 / 0.5 up to 100 mm, Other: 1 | 1 | - | 1 | - | 0.5 | - | 0.5 up to 100 mm, Other: 1 | 1 | - | - | 1 / 0.5 | 1 | 1 | - | - | 1 | - | - | - | - | - | - | - | - | 1 | - | - | 0.5 | - | 1 / 0.5 up to 100 mm, Other: 1 | - | - | - | - | - | - |
Material | - | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | - | Stainless Steel | Stainless Steel | Stainless Steel | - | Stainless Steel | - | - | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | - | Stainless Steel | Stainless Steel | Aluminum | Aluminum | Stainless Steel | Stainless Steel | Aluminum | - | - | - | - | Aluminum | Aluminum | - | - | Aluminum | - | Stainless Steel | Aluminum | Stainless Steel | - | - | - | - | Stainless Steel | Aluminum |
Calibration | - | Corresponds To | Corresponds To | - | - | Non-Compatible | Non-Compatible | Corresponds To | Corresponds To | Corresponds To | - | - | - | - | - | - | Corresponds To | - | - | Corresponds To | Non-Compatible | Non-Compatible | - | - | Corresponds To | - | - | - | - | - | - | - | - | - | - | - | Corresponds To | - | Corresponds To | - | - | - | - | - | - |
JIS | - | JIS1 Grade | JIS1 Grade | - | - | - | - | - | JIS1 Grade | JIS1 Grade | - | JIS1 Grade | JIS1 Grade | JIS1 Grade | JIS B7516 | JIS1 Grade | JIS1 Grade | - | - | JIS1 Grade / JIS B7516 | JIS1 Grade | - | - | - | JIS1 Grade | - | - | - | - | - | - | - | - | - | - | - | JIS B7516 | - | JIS1 Grade | - | - | - | - | JIS B7516 | - |
Calibration Certificate | - | - | - | - | - | - | - | - | - | - | - | - | - | No | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Yes | - | - | - | - | - | - | - | - |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy