Inner Diameter Measuring Instruments（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Diameter Cylinder Gauge

  OZAKI MFG (PEACOCK)

  Dial gauge is not included.[Features]· Conversion rods made of carbide alloy are also available (CC-01, CG-01).· Recommended dial gauge: 17Z/57B (scale interval 0.01 mm): 15Z/5F (scale interval 0.001 mm)

  Calibration Certificate
  -

  From: 5,799,423 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Shaped Cylinder Gauge

  OZAKI MFG (PEACOCK)

  Dial gauge is not included.[Features]· Cemented carbide is used for the tip of the gauge head.· For deep holes, types with longer hand grips can also be manufactured.· Replacement rods made of highly abrasion resistant carbide alloy are also available.· Recommended dial gauge: 17Z/57B (scale interval 0.01 mm): 15Z/5F (scale interval 0.001 mm)

  Calibration Certificate
  -

  From: 7,457,916 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cylinder Gauge CC-R Series

  OZAKI MFG (PEACOCK)

  Materials to be measured (workpieces) are not easily scratched because the part that makes contact with the measurement target (workpiece) has been cut into a large rounded shape, which is then quenched and polished.

  Calibration Certificate
  -

  From: 8,500,163 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Measuring Tool, Anvil, CGB

  MITUTOYO

  Anvil for inner diameter measuring tools.Size (mm): 35/50/100·45/60/110

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cylinder Gauge (NA511)

  BLUEBIRD

  Calibration Certificate
  -

  From: 2,481,219 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner/outer chamfer gauge

  ESCO

  The diameter can be measured by pressing the plunger directly into the chamfered hole.There are internal and external measurement targets.

  Calibration Certificate
  -

  From: 17,521,851 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (90 degrees )Bevel Gauge EA725AA-3

  ESCO

  【Product Specifications】・Measure a diameter by directly imposing the plunger on the beveled hole.・Target…Inside measurement・Applicable angle…0 to 90°・Measurement range…0 to 25mm

  Calibration Certificate
  -

  From: 16,290,724 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small hole gauge Hemispherical ball

  ESCO

  Hemispherical measuring part enables measurement of very shallow small holes, slots, grooves and dents.

  Calibration Certificate
  -

  From: 2,207,095 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Hole Gauge EA725FK-21

  ESCO

  【Product Specifications】・Ball-Semi sphere・Length-50mm・Adapt the gauge to hole size and measure the ballwith a micrometer.・As the total length is 50mm, useful for a work in narrower places.・Specification…3.2 to 3.8mm

  Calibration Certificate
  -

  From: 1,933,596 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 2 — Standard One Revolution Type for Error-free Reading, Lightweight Type

  MITUTOYO

  • Excellent water- and drip-proof characteristics (IP43).• Smooth movement thanks to the improved design of bush and stem.• Application of a hard coating on the surface of the crystal makes the gage scratch- and oil-resistant.• Lightweight type (70g).

  Calibration Certificate
  -

  From: 1,530,000 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  TECLOCK, Cylinder Gauge, Standard Short Size, Measuring Range 100 to 160 mm

  TECLOCK

  [Features]・ The tip of the probe uses a cemented carbide ball with excellent abrasion resistance.・ The integrated direction board with a unique shape has achieved high stability of pointing.[Applications]・ Measurement of inner diameter from ø100 to ø160 mm.・ It is a short type.[Product Specifications]・ Measurement range (mm): 100 to 160・ Length under the grip (mm): 150・ Number of spare rods (pieces): 13 included・ Spare washer (sheets): 4 included・ JAN code: 4560120870304・ Trusco Code: 838-0356・ Weight: 300 g

  Calibration Certificate
  -

  From: 11,027,820 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Teclock, Cylinder Gauge

  TECLOCK

  [Features]・ The tip of the probe uses a cemented carbide ball with excellent abrasion resistance.・ The integrated direction board with a unique shape has achieved high stability of pointing.[Applications]・ Measurement of inner diameter from ø160 to ø250 mm.・ It is a short type.[Product Specifications]・ Measurement range (mm): 160 to 250・ Length under the grip (mm): 150・ Number of spare rods (pieces): 5 included・ Spare washer (sheets): 5 included・ Extension (mm): 50 included・ JAN code: 4560120870328・ Trusco Code: 816-7806・ Weight: 860 g

  Calibration Certificate
  -

  From: 17,510,488 VND
  Days to Ship: Số ngày giao hàng: 25 Day(s) or more

  25 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TECLOCK, Cylinder Gauge, Standard Short Size, Measuring Range 250 to 400 mm

  TECLOCK

  [Features]・ The tip of the probe uses a cemented carbide ball with excellent abrasion resistance.・ The integrated direction board with a unique shape has achieved high stability of pointing.[Applications]・ Measurement of inner diameter from ø250 to ø400 mm.・ It is a short type.[Product Specifications]・ Measurement range (mm): 250 to 400・ Length under the grip (mm): 150・ Number of spare rods (pieces): 6 included・ Spare washer (sheets): 5 included・ Extension (mm): 50 × 2 included・ JAN code: 4560120870342・ Trusco Code: 816-7807・ Weight: 1200 g

  Calibration Certificate
  -

  From: 21,509,628 VND
  Days to Ship: Số ngày giao hàng: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Horizontal Standing External Diameter Measuring Instrument

  CITIZENSEIMITSU

  [Features]· MEI-1: Outer diameter measuring instrument that enables absolute measurements· H-2B: Outer diameter measuring instrument that enables high precision comparative measurement· H-2LB: Supports components up to 45 mm

  Calibration Certificate
  -

  From: 38,437,968 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  Shallow Hole Cylinder Gauge, CGF Series

  AS ONE

  It is possible to measure the inner diameter near the bottom of the hole.Measurement range (mm): 15 to 150

  Calibration Certificate
  -

  From: 12,147,467 VND
  Special Price
  Days to Ship: Số ngày giao hàng: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wrench For Cylinder Gauge

  MITUTOYO

  Wrench for cylinder gauge.Width across flats (mm): 7Thickness (mm): 1.5

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Measuring Instrument, Anvil CG-S10A

  MITUTOYO

  [Features]· Replace with the appropriate anvil according to the measurement dimensions.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Anvil For 511 Series Shallow-Hole Cylinder Gauge CGF-X

  MITUTOYO

  You can measure inner diameter near the bottom of the hole.Cemented carbide balls are used for the probe and the tip of each anvil, providing excellent durability and abrasion resistance.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Extension Rod

  MITUTOYO

  [Features]· Connect up to a total of 4 extension rods for a maximum length of 2 m.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  511 Series Cylinder Gauge With Micrometer Head CGM-X Wrench

  MITUTOYO

  Mitutoyo inner diameter measuring instrument 511 series cylinder gauge with micrometer head CGM-X spanner

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Holtest SERIES 368 — Two-point Internal Micrometers

  MITUTOYO

  • Titanium-coated measuring pins on the threepoint type (over 6mm range models) provide excellent durability and impact resistance and allow the instrument to measure right to the bottom of a blind hole. • Three-point bore micrometer with measuring range 6mm or longer allows stable measurement through automatic centering. • Can measure deep holes using an Extension rod (optional) which is available on models over 6mm (.275") measuring range. • Ratchet Stop ensures constant-force, repeatable measurement. • Setting Rings for accurately setting the instrument are optional.

  Calibration Certificate
  -

  From: 7,974,577 VND
  Days to Ship: Số ngày giao hàng: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — Short Leg Type(Measuring Range: 18-160mm)

  MITUTOYO

  • Compact and lightweight due to the short length below the grip. • Longer plunger stroke with no affect on accuracy. • Carbide contact point ensuring high durability and wear resistance. • This model reduces the influence of heat from the operator's hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement. • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inside Micrometers SERIES 141 — Interchangeable Rod Type(Measuring Range: 25-225mm)

  MITUTOYO

  • Wide range of inside diameter measurements possible by combining one or more interchangeable rods. • Each interchangeable rod is marked with its measuring range. • For models supplied with more than one interchangeable rod, the full measuring range is achieved by combining spacing collars with the rods. • Both micrometer head and rods are satinchrome finished throughout. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 137 — Extension Rod Type (main unit)

  MITUTOYO

  • Micrometer head for Extension Rod Type inside micrometer. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  From: 3,205,000 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 133 — Single Rod Type(Measuring Range: 175-200mm)

  MITUTOYO

  • Standard single rod type inside micrometer. • Carbide measuring faces. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  From: 2,665,000 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — for Small Holes(Measuring Range: 6-18.5mm)

  MITUTOYO

  • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • Setting Rings are available to aid in accurately setting a gage before making a measurement.

  Calibration Certificate
  -

  From: 3,973,077 VND
  Days to Ship: Số ngày giao hàng: 2 Day(s)

  2 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 339 — Extension Pipe Type

  MITUTOYO

  • Wide range of inside diameter measurements possible by combining extension pipes and anvils with the micrometer head. • Carbide measuring faces are available. • The sleeve is rotated to adjust the index line position when setting to a length standard. • An inside length standard is required for accurately setting the micrometer.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 337 — Extension Rod Type

  MITUTOYO

  • Wide range of inside measurements possible by combining extension rods and anvils with the micrometer head. • Two types of measuring faces are available; with or without carbide tip. (No. 337-101/301/302/102/303/304 only available with carbide tip.) • The sleeve is rotated to adjust the index line position when setting to a length standard. • An inside length standard is required for accurately setting the micrometer. • Order No. 337-101/301/302/102/303/304

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — ABSOLUTE Digimatic Bore Gages

  MITUTOYO

  • These ABSOLUTE Digimatic bore gages are exclusively designed for inside diameter measurement. • Up to four extension rods (250mm or 500mm) can be used for measuring at the bottom of a hole 2m deep. • ABS (ABSOLUTE) type bore gages are not subject to overspeed error. • The display and grip can be rotated up to 320 degrees and the display can be inclined up to90 degrees, so that it is easily readable from any direction. • The minimum value holding function provides easy measurement of hole diameter. • Setting the Bore Gage to a master value using a gauge block set allows quick and accurate setting. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gagebefore making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Anvil for SERIES 511 — for Blind Holes

  MITUTOYO

  Standard accessories for SERIES 511 — for Blind Holes

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Sub-anvil for Bore Gages SERIES 511 — with Micrometer Head

  MITUTOYO

  Standard accessories for Bore Gages SERIES 511 — with Micrometer Head.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — with Micrometer Head(Measuring Range: 60-800mm)

  MITUTOYO

  • Micrometer head is attached to the anvil for accurate dimensional setting. • Longer plunger stroke with no affect on accuracy.. • Carbide is used for the contact point ensuring high durability and wear resistance.. • This model reduces the influence of heat from the operator's hand by 50% by increasingthe. grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement.. • Wide measuring range with sub-anvils.. • Alternative indicators may be used in place of those recommended*.. * Some indicators and protection covers cannot be used with these bore gages.. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other.than the recommended models.. • Optional extension rods can be attached for measuring deep holes.. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage. before making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511 — Short Leg Type(Measuring Range: 0.7-6.5inch)

  MITUTOYO

  • Compact and lightweight due to the short length below the grip. • Longer plunger stroke with no affect on accuracy. • Carbide contact point ensuring high durability and wear resistance. • This model reduces the influence of heat from the operator's hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement. • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately settinga gage before making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Sub-anvil for Bore Gages SERIES 511

  MITUTOYO

  Standard accessories for Bore Gages SERIES 511

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 511(Measuring Range: 0.7-16inch)

  MITUTOYO

  • Longer plunger stroke with no affect on accuracy. • Carbide is used for the contact point ensuring high durability and wear resistance. • This model reduces the influence of heat from the operator's hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement. • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • Optional extension rods can be attached for measuring deep holes. • A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Spanner for Bore Gages SERIES 511 — for Small Holes

  MITUTOYO

  Standard Accessories for Bore Gages SERIES 511 — for Small Holes

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Gages SERIES 526 — for Extra Small Holes(Measuring Range: 0.037-0.7inch, Probing depth: 0.45-2.42inch)

  MITUTOYO

  • These gages are designed to measure the diameters of very small holes. The radial displacement of the split-ball anvil is converted to axial displacement of the measuring rod, which is shown on the dial indicator. • Alternative indicators may be used in place of those recommended*. * Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales office if considering the use of dial or digimatic indicators other than the recommended models. • An optional stand (215-120-10) is available for efficient measurement of multiple small holes.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Inside Micrometers SERIES 141 — Interchangeable Rod Type(Measuring Range: 1-40inch)

  MITUTOYO

  • Wide range of inside diameter measurements possible by combining one or more interchangeable rods. • Each interchangeable rod is marked with its measuring range. • For models supplied with more than one interchangeable rod, the full measuring range is achieved by combining spacing collars with the rods. • Both micrometer head and rods are satinchrome finished throughout. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 139 — Extension Pipe Type (main unit)

  MITUTOYO

  • Micrometer head for Extension Pipe Type inside micrometer. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring, CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Spanner for Bore Gages SERIES 511 — with Micrometer Head

  MITUTOYO

  Standard accessories for Bore Gages SERIES 511 — with Micrometer Head.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 139, 339, 140 — Extension Pipe Type

  MITUTOYO

  • World's highest performing micrometer overall. • Extended battery life of approximately 2.4 years. • Ergonomic anti-slip frame cover and front panel for more comfortable hand-held measurements. • Ratchet thimble provides better operability for one-handed operation. • Oil-resistant material used for all plastic parts. • Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. • Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as Excel. • Two types of constant-force devices are available: Ratchet Stop and Ratchet Thimble. • Measuring faces: Carbide

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 137, 337 — Extension Rod Type (Main Unit)

  MITUTOYO

  • Micrometer head for Extension Rod Type inside micrometer. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tubular Inside Micrometers SERIES 133 — Single Rod Type(Measuring Range: 2-12inch)

  MITUTOYO

  • Standard single rod type inside micrometer. • Carbide measuring faces. • The sleeve is rotated to adjust the index line position when setting to a length standard. • Setting ring (nominal size below 300mm), CERA Inside Micro Checker, and Gauge Block accessory set are provided as a reference gage for datum adjustment.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Borematic SERIES 568 — ABSOLUTE Digimatic Snap-Open Bore Gages(Measuring Range: 0.275-5inch)

  MITUTOYO

  • A snap-type digital display, inside-diameter measuring instrument allows quick and easy measurement with lever operation. • Titanium-coated measuring pins provide excellent durability and impact resistance andallow the instrument to measure right to the bottom of a blind hole. • Three-Point contact measuring head enables highly repeatable measurement data to be obtained. • The ABSOLUTE linear encoder eliminates overspeed errors. • GO/NO-GO judgment function. • Dual HOLD function buttons, optimally located, enable high operability. • 330-degree rotatable display unit for easy reading at any angle. • Measurement can be made close to the bottom of a blind hole. • Can measure deep holes by attaching an optional extension rod. • Digimatic output port enables inclusion in a statistical process control or networkedmeasurement system. • Interface Input Tools are available that enable the conversion of measurement datato keyboard signals that are then directly input to cells in off-the-shelf spreadsheet softwaresuch as Excel. • Interchangeable-Head Bore Gages are available in part sets and full sets.

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Holtest (Type II) SERIES 368 — Three-point Internal Micrometers

  MITUTOYO

  • Hardened tool-steel anvils (instead of titanium-coated carbide) for a more economically priced tool. • Same accuracy as the titanium-coated Holtest models. • Constant-force device allows repeatable measurement. • Can measure deep holes using an Extension Rod (optional).

  Calibration Certificate
  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Calibration Certificate

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	MITUTOYO	BLUEBIRD	ESCO	ESCO	ESCO	ESCO	MITUTOYO	TECLOCK	TECLOCK	TECLOCK	CITIZENSEIMITSU	AS ONE	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO
Product SeriesDòng sản phẩm	Small Diameter Cylinder Gauge	Standard Shaped Cylinder Gauge	Cylinder Gauge CC-R Series	Inner Diameter Measuring Tool, Anvil, CGB	Cylinder Gauge (NA511)	Inner/outer chamfer gauge	(90 degrees )Bevel Gauge EA725AA-3	Small hole gauge Hemispherical ball	Small Hole Gauge EA725FK-21	SERIES 2 — Standard One Revolution Type for Error-free Reading, Lightweight Type	TECLOCK, Cylinder Gauge, Standard Short Size, Measuring Range 100 to 160 mm	Teclock, Cylinder Gauge	TECLOCK, Cylinder Gauge, Standard Short Size, Measuring Range 250 to 400 mm	Horizontal Standing External Diameter Measuring Instrument	Shallow Hole Cylinder Gauge, CGF Series	Wrench For Cylinder Gauge	Inner Diameter Measuring Instrument, Anvil CG-S10A	Anvil For 511 Series Shallow-Hole Cylinder Gauge CGF-X	Extension Rod	511 Series Cylinder Gauge With Micrometer Head CGM-X Wrench	Holtest SERIES 368 — Two-point Internal Micrometers	Bore Gages SERIES 511 — Short Leg Type(Measuring Range: 18-160mm)	Inside Micrometers SERIES 141 — Interchangeable Rod Type(Measuring Range: 25-225mm)	Tubular Inside Micrometers SERIES 137 — Extension Rod Type (main unit)	Tubular Inside Micrometers SERIES 133 — Single Rod Type(Measuring Range: 175-200mm)	Bore Gages SERIES 511 — for Small Holes(Measuring Range: 6-18.5mm)	Tubular Inside Micrometers SERIES 339 — Extension Pipe Type	Tubular Inside Micrometers SERIES 337 — Extension Rod Type	Bore Gages SERIES 511 — ABSOLUTE Digimatic Bore Gages	Anvil for SERIES 511 — for Blind Holes	Sub-anvil for Bore Gages SERIES 511 — with Micrometer Head	Bore Gages SERIES 511 — with Micrometer Head(Measuring Range: 60-800mm)	Bore Gages SERIES 511 — Short Leg Type(Measuring Range: 0.7-6.5inch)	Sub-anvil for Bore Gages SERIES 511	Bore Gages SERIES 511(Measuring Range: 0.7-16inch)	Spanner for Bore Gages SERIES 511 — for Small Holes	Bore Gages SERIES 526 — for Extra Small Holes(Measuring Range: 0.037-0.7inch, Probing depth: 0.45-2.42inch)	Inside Micrometers SERIES 141 — Interchangeable Rod Type(Measuring Range: 1-40inch)	Tubular Inside Micrometers SERIES 139 — Extension Pipe Type (main unit)	Spanner for Bore Gages SERIES 511 — with Micrometer Head	Tubular Inside Micrometers SERIES 139, 339, 140 — Extension Pipe Type	Tubular Inside Micrometers SERIES 137, 337 — Extension Rod Type (Main Unit)	Tubular Inside Micrometers SERIES 133 — Single Rod Type(Measuring Range: 2-12inch)	ABSOLUTE Borematic SERIES 568 — ABSOLUTE Digimatic Snap-Open Bore Gages(Measuring Range: 0.275-5inch)	Holtest (Type II) SERIES 368 — Three-point Internal Micrometers
From	5,799,423 VND	7,457,916 VND	8,500,163 VND		2,481,219 VND	17,521,851 VND	16,290,724 VND	2,207,095 VND	1,933,596 VND	1,530,000 VND	11,027,820 VND	17,510,488 VND	21,509,628 VND	38,437,968 VND	12,147,467 VND Special Price On Sale Till 31/03/2025						7,974,577 VND			3,205,000 VND	2,665,000 VND	3,973,077 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	10 Day(s) or more	2 Day(s) or more	4 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	46 Day(s)	12 Day(s) or more	25 Day(s) or more	11 Day(s) or more	9 Day(s) or more	12 Day(s) or more	Quote	Quote	Quote	Quote	Quote	2 Day(s) or more	46 Day(s) or more	Quote	46 Day(s)	46 Day(s)	2 Day(s)	Quote	Quote	Quote	Quote	Quote	46 Day(s) or more	Quote	Quote	Quote	Quote	Quote	46 Day(s) or more	Quote	Quote	46 Day(s) or more	46 Day(s) or more	Quote	Quote	Quote
Calibration Certificate	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…