• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Test Indicator SERIES 513 — Universal Type

  MITUTOYO

  Universal application to all directions. (Not only the direction of the measuring point, but also the direction of measurement itself can be adjusted 360 degrees without moving the indicator.)

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Signal indicator 1S series

  CITIZENSEIMITSU

  This smaller compact type can also be installed in even narrower locations. Durability - A ball slide has been adopted for the spindle part to increase the durability. Environmental resistance - Improved dust-proof and drip-proof properties. Safe for use in machining/assembling sites, etc. as well.

  From: 14,071,213 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation

  MITUTOYO

  • Standard 0.01mm graduation dial gauges having a bezel with an outside diameter of 57 mm.All types come with limit markers and a bezel clamp as standard.• The bezel clamp and lifting lever (optional) can be attached to either the right or leftside.These parts can be easily installed and removed without tools.• Secure adhesion between the bezel and crystal as well as the use of an O-ringprevents water or oil penetration.• The spindle is made of high-strength quench hardened stainless steel suitable for heavy duty use.• A carbide contact point is used.• The grand gear is made of stainless steel with high resistance to wear and deformation.• Application of a hard coating on the surface of the crystal makesthe gauge highly scratch and chemical-resistant.

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge 0.001 mm

  MISUMI

  An essential item for work sites or inspection procedures. Providing low-priced products with excellent cost performance [C-Value]

  From: 1,283,049 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long stroke dial gauge Graduation: 0.01mm, 0.05mm, 0.1mm

  OZAKI MFG (PEACOCK)

  [Features]· The most widely used long stroke dial gauge with scale intervals of 0.01 mm/0.05 mm/0.1 mm. With spindle lifting lever, middle 2 needle type is also available.· Select from a wide range of device models to suit the application.· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.· Limit stickers are included as standard with all models.· Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.

  From: 1,964,048 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge 543 Series, Digimatic Indicator ID-H

  MITUTOYO

  World top level digital indicator that supports high accuracy and multi-functional measurement. Equipped with a wide range of functions that support diversified measurement requirements.

  From: 13,252,500 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX SERIES 543 - Standard Type

  MITUTOYO

  • The ABS (absolute) sensor restores the last origin position automaticallywhen the indicator is turned on.• Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increaseddue to elimination of over-speed errors.• Tolerance-judging measurement is available by setting upper and lower limit values.• Battery life of approx. 7,000 hours in continuous use has been achieved with onlyone battery.• Equipped with a data output port that enables incorporation into measurement networkingand statistical process control systems.

  From: 9,377,000 VND
  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type

  MITUTOYO

  Dial gauge with a compact design. Does not take up space when attached to jigs.

  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, ABSOLUTE Digimatic Indicator ID-SX Series 543

  MITUTOYO

  • Cost-effective oriented design ID-SX indicators use a button-type battery (SR44) and come with the minimum of functionality for ease of use. There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mm or inch-based measurement resolutions. • IP53 dust/water protection level The models listed below also provide IP53 dust/ water protection level specifications: 543-794/94B/95/95B/96/96B • ABS (absolute) sensor These Digimatic indicators employ Mitutoyo’s proprietary ABS (absolute) sensor, which makes it possible to restore the origin point even if the power is turned off. This eliminates the need to perform origin restoration each time the power is turned on. Furthermore, this sensor ensures that overspeed errors do not occur, which improves reliability. • Long battery life One button battery (SR44) provides approximately 20,000 hours of continuous use for .0005”/0.01mm resolution models.

  From: 3,716,667 VND
  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543

  MITUTOYO

  • The ABS (absolute) sensor restores the last origin position automaticallywhen the indicator is turned on.• Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increaseddue to elimination of over-speed errors.• Tolerance-judging measurement is available by setting upper and lower limit values.• Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery.• Equipped with a data output port that enables incorporation into measurement networkingand statistical process control systems.

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Dial Gauge, Dial comparator (Point Measuring Instrument)

  MAHR

  [Features]·Innovative scale panel design.·In order to improve repeatability and durability, rubies are used for all internal friction parts.·The measuring spindle uses a patented special bearing.·The shock prevention mechanism automatically disconnects the mechanism when the measurement range is exceeded to prevent failure.·A long-selling product that was developed and sold 70 years ago.·Large, high-contrast dial.·Adjustable Tolerance Marker.·Lock type fine adjustment screw.·Both the mounting shank and measuring spindle are made of hardened stainless steel.·Insensitive to lateral forces (lateral play) acting as a measuring spindle.·Maximum sensitivity and accuracy are ensured only by excellent travel performance and the use of precision gears and pinions.·The measuring spindle can be retracted with either a cable release screw or a lift knob.[Applications]·1µm, 0.5µm precision measurement.·Precision machined product manufacturing field.·Precision equipment manufacturing and automobile parts manufacturing fields.

  From: 8,535,465 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Shaped Dial Gauge (Scale Interval: 0.001 mm)

  OZAKI MFG (PEACOCK)

  The most widely used dial gauge with scale intervals of 0.001/0.005 mm. Select from a wide range of devices to suit the application.[Features]· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.· Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.· Limit stickers are included as standard with all models.

  From: 2,704,500 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pocket Type Dial Test Indicator SERIES 513

  MITUTOYO

  • Jeweled bearings assure higher sensitivity and accuracy. Indicator can be mounted by clamping the stem or the body (except for 513-517WE and 513-517WT). • Reversible measuring direction (Clutch type). • Two holding bars are supplied. (Full sets only.) • Fully adjustable bezel/dial face. • Stylus is adjustable within 220°. • Bezel is sealed with on O-ring to keep out water and oil.

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  ANSI/AGD Type Metric Dial Indicator with ø3/8" Stem and #4-48UNF-Thread Contact Point Compatible Type

  MITUTOYO

  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 2 — Standard One Revolution Type for Error-free Reading

  MITUTOYO

  • Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistance to shock due to sudden spindle retraction caused by impact. • This series has been developed to eliminate the possibility of reading errors due to miscounting multiple revolutions. • The dead zone in red indicates “accuracy not guaranteed”.

  Days to Ship: Số ngày giao hàng: 46 Day(s) or more

  46 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 2 — Standard Type, Inch Reading

  MITUTOYO

  -

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Dial Gauge 2 Series, Waterproof Type, Scale Interval 0.01 / 0.001 mm Type

  MITUTOYO

  Dial Indicators Series 2- Metric Standard Type [FEATURES]Series 2 dial indicators are Mitutoyo’s most popular, and have the widest application.Standard 0.01 mm graduation dial gauges having an outer frame with an outside diameter of 57 mm. All types come with limit pins and an outer frame clamp as standard.The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.The stem spindle is made of high-strength quench-hardened stainless steel which resists strenuous use.A carbide contact point is used.The grand gear uses stainless steel that is resistant to wear and deformation.Application of a hard coating on the surface of the crystal makes the gauge highly scratch- and chemical-resistant.[Usage]· For comparative measurement. Installation on jigs.[Specification]· Measurement Range (mm): 0 to 10· Minimum Display (mm): 0.010· Graduation Specification: 0-100· Mount Shaft Diameter (mm): 8·Measuring Force (N): 2.5 or less·Dial diameter: 57 mm

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Dial Gauge 2 Series, Under 1 Turn Type

  MITUTOYO

  It is excellent in durability and impact resistance as it adopts Mitsutoyo's unique shock proof mechanism which uses cushioning mechanism. Dial gauge developed to prevent reading errors during multiple rotations.

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  0.1 mm Scale Dial Indicator

  TECLOCK

  [Features]· High-precision dial gauge that can be read in units of 0.1 mm.[Applications]· For use in areas with limited space, such as sizing of machinery and assembly into dedicated machines.· Used for rough dimension measurement of woodwork and rubber material and judgment of deviation in dimensions.

  From: 1,510,375 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Large Dial Gauge, 3/4 Series Long Stroke

  MITUTOYO

  The scale of this dial gauge has a large surface diameter for easy reading. Models with long measurement ranges are also available. Limit needle and outer frame clamp are included as standard with all models.

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Compact Dial Gauge (Back lid with lug type/Flat back lid type)

  TECLOCK

  [Features]· Small, lightweight, and easy to use with a high level of precision, it is widely used as a measurement instrument for measuring length in a variety of fields.[Applications]· For use in areas with limited space, such as sizing of machinery and assembly into dedicated machines.

  From: 1,665,821 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Compact Dial Gauge (Measurement Range 1 to 5 mm)

  OZAKI MFG (PEACOCK)

  Compact dial gauge with small surface diameter. Does not take up space for multipoint measurement or mounting to a jig, etc.

  From: 1,528,117 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Pocket Type Dial Test Indicator Series 513

  MITUTOYO

  • Jeweled bearings assure higher sensitivity and accuracy. Indicator can be mounted by clamping the stem or the body (except for 513-517WE and 513-517WT). • Reversible measuring direction (Clutch type). • Two holding bars are supplied. (Full sets only.) • Fully adjustable bezel/dial face. • Stylus is adjustable within 220°. • Bezel is sealed with on O-ring to keep out water and oil.

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Test Indicator SERIES 513 — Universal Type

  MITUTOYO

  • Universal application to all directions. (Not only the direction of the measuring point, but also the direction of measurement itself can be adjusted 360 degrees without moving the indicator.)

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  ABSOLUTE Digimatic Indicator ID-U SERIES 575 — Slim and Economical Design

  MITUTOYO

  • General purpose indicator with the measuring range of 25.4mm/ 1”. • Cost-effective and user-friendly type which is equipped with the basic functions necessary. • The ABS (absolute) sensor restores the last origin position automatically when the indicatoris turned on, and realizes high reliability by eliminating over-speed errors. • Battery life of 20,000 hours in continuous use has been achieved. • Easy-to-read large LCD readout with the character height of 8mm. • Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.

  From: 4,995,000 VND
  Days to Ship: Số ngày giao hàng: 46 Day(s)

  46 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Gauge, Digital Indicator

  NIIGATA SEIKI (SK)

  Dial gauge that is ideal for displacement measurements such as plane contour, workpiece mounting quality evaluation, shaft runout and perpendicularity, etc.[Features]· It is a high cost performance model with an easy-to-see digital display.· With hold function.· With auto off function. (Approximately 5 minutes)· Scale interval 0.01 mm, measurement range 12.7 mm.· Comes with two back covers, a flat type and a type with lug.[Applications]· Can be used for displacement measurements such as plane contour, workpiece mounting quality evaluation, perpendicularity, etc.

  From: 1,964,441 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Dial Gauge 73750

  SHINWASOKUTEI

  [Features]・ It comes with logs that is convenient for attaching to a magnetic stand[Applications]・ For flatness measurement, parallelism measurement, eccentricity measurement, comparative measurement

  From: 689,922 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2 Series Standard Dial Gauge (Guide Adjustment Type)

  MITUTOYO

  Rotate the head knob to adjust the pointer position independent of the vertical movement of the spindle.

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Durometer

  NIIGATA SEIKI (SK)

  Dial gauge that measures the hardness of rubber and plastics, conforming to JIS and ISO standards.[Features]· Conforms to the following standards regarding the shape of the pushing needle, dimensions of the pressing surface, and spring force.· JIS K 6253 (hardness test method for vulcanized rubber).· ISO 7619 (E).[Applications]· It is used as a hardness meter to measure the hardness of rubber/plastic.

  From: 4,545,992 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Shaped Dial Gauge (Scale Interval: 0.01 mm)

  OZAKI MFG (PEACOCK)

  [Features]· The most widely used dial gauge with scale intervals of 0.01 mm. Select from a wide range of devices to suit the application.· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.· Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.· Limit stickers are included as standard with all models.

  From: 961,958 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pointer Less Than One Rotation Dial Gauge

  OZAKI MFG (PEACOCK)

  [Features]· Dial gauge with scale intervals of 0.01 mm/0.001 mm and a pointer with less than one full rotation.· The rotation of the pointer is kept to less than 1 turn in order to prevent misreading.· Choose from an abundance of device models for the dedicated relative measurement dial

  From: 1,406,544 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Shaped Dial Gauge (Scale Interval: 0.005 mm)

  OZAKI MFG (PEACOCK)

  [Features]· The most widely used dial gauge with scale intervals of 0.001/0.005 mm.· Select from a wide range of devices to suit the application.· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.· Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.· Limit stickers are included as standard with all models.

  From: 4,443,108 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Indicator (NA)

  BLUEBIRD

  • Volume Discount

  From: 878,496 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dial Test Indicator (NA513)

  BLUEBIRD

  From: 2,266,445 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Standard Dial Gauge (Graduations: 0.01 mm)

  NIIGATA SEIKI (SK)

  Standard model dial gauge with 0.01‑mm graduations and excellent abrasion resistance. [Features]· The most common type of dial gauge with 0.01‑mm graduations. Built-in limit indicator.· Features an O-ring sealed between the inner and outer lid to prevent water and oil entering.· Uses jewel bearings.· Uses a green scale plate for improved visibility.· Flat-type back and center-lug back lid included.· Carbide probe. [Applications]· Measuring surface flatness and checking tool set ups.· Used for measuring axial runout, checking squareness, etc.

  From: 1,139,224 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Back Plunger Type Dial Indicator SERIES 1

  MITUTOYO

  • Back plunger type dial gauges are suitable for mounting onto leveling machine tool tables or inspection jigs, and for use in situations where standard dial gauges are difficult to read. • Model 1960T and 1961T, which uses Mitutoyo’s proprietary shock-proofing mechanism, hasexcellent durability and shock resistance.

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 2 — Special Dial Indicators

  MITUTOYO

  Adjustable hand dial gauge ● The hand position can be adjusted independently of the position of the spindle by rotating the top knob.

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 1 — Compact One Revolution Type for Error-free Reading

  MITUTOYO

  • Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistanceto shock due to sudden spindle retraction caused by impact. • This series has been developed to eliminate the possibility of reading errors due to miscounting multiple revolutions. • The dead zone in red indicates “accuracy not guaranteed” . • One revolution type Back plunger dial gages are also available.

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 2 — Standard One Revolution Type for Error-free Reading, Lightweight Type

  MITUTOYO

  • Excellent water- and drip-proof characteristics (IP43). • Smooth movement thanks to the improved design of bush and stem. • Application of a hard coating on the surface of the crystal makes the gage scratch- and oil-resistant. • Lightweight type (70g).

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  SERIES 2 — Standard One Revolution Type for Error-free Reading, Waterproof Type

  MITUTOYO

  • Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistance to shockdue to sudden spindle retraction caused by impact. • This series has been developed to eliminate the possibility of reading errors due to miscounting multiple revolutions. • The dead zone in red indicates “accuracy not guaranteed”. • One revolution type Back plunger dial gages are also available.

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Long stroke dial gauge

  MISUMI

  Providing a common long stroke dial gauge at a price like this [C-Value]

  From: 1,377,119 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Digital S Line Indicator (IP65)

  NIIGATA SEIKI (SK)

  Water- and dustproof dial gauge with an IP65 waterproof rating.[Features]· A compact digital indicator suitable for use in tight spaces.· Minimum display switchable between 0.01 and 0.001 mm. (DEI-233S2 only)· With a function to switch measurement direction (+ -).· With preset function.· With auto off function. (Approximately 4 hours)[Applications]· Can be used securely at work sites exposed to dust and cutting fluid.· Used for displacement measurements such as plane contour, workpiece mounting quality evaluation, shaft runout and perpendicularity, etc.

  From: 12,325,465 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2 Series Standard Dial Gauge Less Than 1 Rotation / Waterproof Type

  MITUTOYO

  It is excellent in durability and impact resistance as it adopts Mitsutoyo's unique shock proof mechanism which uses cushioning mechanism. Dial gauge developed to prevent reading errors during multiple rotations.

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Dial Gauge 2 Series, Long Stroke Type

  MITUTOYO

  2 Series Regular Dial Gauge, Long Stroke Type

  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Dial Gauge

  TECLOCK

  [Features]· High-precision dial gauge that can be read in units of 0.01 mm.[Applications]· For use in areas with limited space, such as sizing of machinery and assembly into dedicated machines.

  From: 1,277,496 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Application
Scale interval minimal display(mm)
Display Method
Maximum Measurement Length (Range Selection)(mm)
Waterproof Function
Output terminal for measuring data: with or without
Scale type
Calibration Certificate

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MITUTOYO	CITIZENSEIMITSU	MITUTOYO	MISUMI	OZAKI MFG (PEACOCK)	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MAHR	OZAKI MFG (PEACOCK)	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	TECLOCK	MITUTOYO	TECLOCK	OZAKI MFG (PEACOCK)	MITUTOYO	MITUTOYO	MITUTOYO	NIIGATA SEIKI (SK)	SHINWASOKUTEI	MITUTOYO	NIIGATA SEIKI (SK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	OZAKI MFG (PEACOCK)	BLUEBIRD	BLUEBIRD	NIIGATA SEIKI (SK)	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MISUMI	NIIGATA SEIKI (SK)	MITUTOYO	MITUTOYO	TECLOCK
Product SeriesDòng sản phẩm	Dial Test Indicator SERIES 513 — Universal Type	Signal indicator 1S series	Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation	Dial Gauge 0.001 mm	Long stroke dial gauge Graduation: 0.01mm, 0.05mm, 0.1mm	Dial Gauge 543 Series, Digimatic Indicator ID-H	Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX SERIES 543 - Standard Type	Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type	Dial Gauge, ABSOLUTE Digimatic Indicator ID-SX Series 543	Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543	Dial Gauge, Dial comparator (Point Measuring Instrument)	Standard Shaped Dial Gauge (Scale Interval: 0.001 mm)	Pocket Type Dial Test Indicator SERIES 513	ANSI/AGD Type Metric Dial Indicator with ø3/8" Stem and #4-48UNF-Thread Contact Point Compatible Type	SERIES 2 — Standard One Revolution Type for Error-free Reading	SERIES 2 — Standard Type, Inch Reading	Regular Dial Gauge 2 Series, Waterproof Type, Scale Interval 0.01 / 0.001 mm Type	Regular Dial Gauge 2 Series, Under 1 Turn Type	0.1 mm Scale Dial Indicator	Large Dial Gauge, 3/4 Series Long Stroke	Compact Dial Gauge (Back lid with lug type/Flat back lid type)	Compact Dial Gauge (Measurement Range 1 to 5 mm)	Dial Gauge, Pocket Type Dial Test Indicator Series 513	Dial Test Indicator SERIES 513 — Universal Type	ABSOLUTE Digimatic Indicator ID-U SERIES 575 — Slim and Economical Design	Dial Gauge, Digital Indicator	Standard Type Dial Gauge 73750	2 Series Standard Dial Gauge (Guide Adjustment Type)	Durometer	Standard Shaped Dial Gauge (Scale Interval: 0.01 mm)	Pointer Less Than One Rotation Dial Gauge	Standard Shaped Dial Gauge (Scale Interval: 0.005 mm)	Dial Indicator (NA)	Dial Test Indicator (NA513)	Standard Dial Gauge (Graduations: 0.01 mm)	Back Plunger Type Dial Indicator SERIES 1	SERIES 2 — Special Dial Indicators	SERIES 1 — Compact One Revolution Type for Error-free Reading	SERIES 2 — Standard One Revolution Type for Error-free Reading, Lightweight Type	SERIES 2 — Standard One Revolution Type for Error-free Reading, Waterproof Type	Long stroke dial gauge	Digital S Line Indicator (IP65)	2 Series Standard Dial Gauge Less Than 1 Rotation / Waterproof Type	Regular Dial Gauge 2 Series, Long Stroke Type	Standard Dial Gauge
From		14,071,213 VND		1,283,049 VND	1,964,048 VND	13,252,500 VND	9,377,000 VND		3,716,667 VND		8,535,465 VND	2,704,500 VND							1,510,375 VND		1,665,821 VND	1,528,117 VND			4,995,000 VND	1,964,441 VND	689,922 VND		4,545,992 VND	961,958 VND	1,406,544 VND	4,443,108 VND	878,496 VND	2,266,445 VND	1,139,224 VND						1,377,119 VND	12,325,465 VND			1,277,496 VND
Days to ShipSố ngày giao hàng	Quote	4 Day(s) or more	46 Day(s) or more	4 Day(s) or more	4 Day(s) or more	9 Day(s)	Quote	8 Day(s) or more	Quote	46 Day(s) or more	6 Day(s) or more	4 Day(s) or more	Quote	Quote	46 Day(s) or more	Quote	Quote	Same day or more	6 Day(s) or more	Quote	4 Day(s) or more	4 Day(s) or more	Quote	Quote	46 Day(s)	Same day	4 Day(s) or more	Quote	9 Day(s)	4 Day(s) or more	Same day or more	6 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	Quote	Quote	Quote	Quote	Quote	4 Day(s) or more	7 Day(s) or more	Quote	Quote	4 Day(s) or more
Application	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type
Scale interval minimal display(mm)	-	10	0.001 ～ 0.01	0.001	0.01 ～ 0.1	0.0005/0.001 switching	0.01	0.002 ～ 0.01	-	-	0.0005 ～ 0.001	0.001	-	-	-	-	0.001 ～ 0.01	0.001 ～ 0.1	0.1	0.001 ～ 0.01	0.01 ～ 0.1	0.001 ～ 0.01	-	-	-	0.01	0.01	0.01	-	0.01	0.001 ～ 0.01	0.005	-	-	0.01	-	-	-	-	-	0.01	0.01 ～ 0.01/0.001 (Switchable)	0.001	0.01	0.01
Display Method	Dial	Dial	Dial	Dial	Dial	Digital	Digital	Dial	Digital	Digital	Dial	Dial	Dial	-	-	-	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Digital	Digital	Digital	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	-	-	-	Dial	Digital	Dial	Dial	Dial
Maximum Measurement Length (Range Selection)(mm)	-	-	1.1 to 5 ～ 6~20	0–1	6~20 ～ 51 to 100	21 to 50	-	0–1 ～ 1.1 to 5	-	-	0–1	0–1 ～ 1.1 to 5	-	-	-	-	0–1 ～ 1.1 to 5	0–1 ～ 1.1 to 5	6~20	0–1 ～ 51 to 100	1.1 to 5 ～ 6~20	0–1 ～ 1.1 to 5	-	-	-	6~20	6~20	6~20	-	0–1 ～ 6~20	0–1	1.1 to 5	0~10 ～ 0~50	0~0.2 ～ 0~0.8	1.1 to 5 ～ 6~20	-	-	-	-	-	21 to 50	6~20	0–1	6~20 ～ 21 to 50	1.1 to 5 ～ 6~20
Waterproof Function	-	-	NA	NA	-	NA	NA	NA	-	-	-	Available	-	-	-	-	Available	NA	-	NA	-	-	-	-	-	NA	NA	NA	NA	Available	-	Available	NA	NA	NA	-	-	-	-	-	NA	Available	Available	Available / NA	-
Output terminal for measuring data: with or without	-	-	NA	NA	-	Available	-	NA	-	-	-	-	-	-	-	-	NA	NA	-	NA	-	-	-	-	-	NA	NA	NA	NA	-	-	-	-	-	NA	-	-	-	-	-	NA	NA	NA	NA	-
Scale type	-	Balance Scale	Continuous Scale / Balance Scale	Continuous Scale	Continuous Scale / Reverse Scale	-	-	Continuous Scale / Balance Scale	-	-	Balance Scale	Continuous Scale / Balance Scale	-	-	-	-	Continuous Scale / Balance Scale	Balance Scale	Continuous Scale	Continuous Scale / Balance Scale	Continuous Scale	Continuous Scale / Balance Scale	-	-	-	-	Continuous Scale	Continuous Scale	Continuous Scale	Continuous Scale / Reverse Scale	Balance Scale	Continuous Scale	Continuous Scale	Balance Scale	Continuous Scale	-	-	-	-	-	Continuous Scale	-	Balance Scale	Continuous Scale / Reverse Scale	Continuous Scale
Calibration Certificate	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	No	-	-	-	-	-	-	-	-	-	-

Loading...Tải…