(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Dial gauges are measuring instruments that can accurately measure minute lengths and displacements. Unlike other measuring instruments that directly measure numerical values, they are used for measuring the difference compared to a reference or correcting parallelism. Dial gauges are available in variou
Dial gauges are measuring instruments that can accurately measure minute lengths and displacements. Unlike other measuring instruments that directly measure numerical values, they are used for measuring the difference compared to a reference or correcting parallelism. Dial gauges are available in various types, including a standard type and lever type. The standard type uses gears and a lever to convert the linear motion of a spindle into rotational motion, mechanically expand this motion and indicate the displacement with a scale. They are suited to observing significant changes. The lever-type uses sector gears and crown gears to expand the motion. While the lever-type has a higher resolution than the standard type, the variation is converted into the rotational motion of the lever, so a big change may be indicated with a smaller figure than the actual number. A single reading of a standard-type dial gauge is 0.01 mm, but there are also special dial gauges with a single reading of 0.001 mm. In addition to an analog type where measurements are read on a scale, a digital type is available as well.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
294 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
MITUTOYO
[Features]·This is a dial gauge accessory (probe).·Thread section of replacement probe: M2.5 (P=0.45) ×5 mm
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Probe / Parts | - | - | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Dial Gauge, New Pic-test (No Clutch Type, PCN Type)
OZAKI MFG (PEACOCK)
[Features]· No-latch type with a lever-type dial gauge lacking the most general switching lever.· The pointer continually rotates clockwise in accordance with the upward and downward movement of the gauge head, improving measurement efficiency for a wide range of applications.· Select from 0.01 mm, 0.002 mm, or 0.001 mm types.· Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the ...Readmore
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Lever Type (Indicator) | 0.001 ~ 0.01 | Dial | 0–1 ~ 1.1 to 5 | Available | - | Balance Scale | - |
From: 2,901,810 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX SERIES 543 - Standard Type
MITUTOYO
• The ABS (absolute) sensor restores the last origin position automaticallywhen the indicator is turned on.• Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increaseddue to elimination of over-speed errors.• Tolerance-judging measurement is available by setting upper and lower limit values.• Battery life of approx. 7,000 hours in continuous use has been achieved with onlyone battery.• Equipped with a data output por...Readmore
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Standard Type / Lever Type (Indicator) | 0.01 | Digital | - | NA | - | - | - |
From: 9,377,000 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
Replacement probe. (Entire threaded portion is M2.5 (P = 0.45) mm.)
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Probe | - | - | - | - | - | - | - |
From: 1,104,186 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type
MITUTOYO
Dial gauge with a compact design. Does not take up space when attached to jigs.
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Standard Type | 0.002 ~ 0.01 | Dial | 0–1 ~ 1.1 to 5 | NA | NA | Continuous Scale / Balance Scale | - |
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
Very useful to add probe joints when probes do not reach the object using a standard dial gauge.
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Probe | - | - | - | - | - | - | - |
From: 235,695 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Dial Gauge, Dial Thickness Gauge (0.001 mm Type)
OZAKI MFG (PEACOCK)
[Features]· Thickness gauge with scale intervals of 0.001 mm.· Ideal for measuring the thickness of precise small objects, films, special fabrics, etc.· Available with two measurement ranges, 0 to 1 mm or 0 to 5 mm
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Thickness type | 0.001 | Dial | 0–1 ~ 1.1 to 5 | - | - | Continuous Scale | - |
From: 4,550,517 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Dial Gauge, Thickness Gauge (Standard Type)
TECLOCK
[Features]·Since the anvil is made of ceramic, it has excellent wear resistance and there is no need to worry about rust.[Applications]·The actual thickness and diameter of glass, rubber, plastic, paper, etc., as well as metal workpieces can be measured.
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Thickness type | 0.01 | Dial | 6~20 | - | - | Continuous Scale | - |
From: 2,026,842 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Dial Gauge, ABSOLUTE Digimatic Indicator ID-SX Series 543(Measuring force(N): 1.5 or less)
MITUTOYO
• Cost-effective oriented design ID-SX indicators use a button-type battery (SR44)and come with the minimum of functionality for ease of use.There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mmor inch-based measurement resolutions.• ABS (absolute) sensor• Long battery life One button battery (SR44) provides approximately 20,000 hours of continuous use for .0005”/0.01mm resolution models.
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | 0~12.7 | Available | - | - | - |
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Bush for SERIES 215 — Comparator Stands
MITUTOYO
Optional accessory for SERIES 215 — Comparator Stands
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Parts | - | - | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation
MITUTOYO
• Standard 0.01mm graduation dial gauges having a bezel with an outside diameter of 57 mm.All types come with limit markers and a bezel clamp as standard.• The bezel clamp and lifting lever (optional) can be attached to either the right or leftside.These parts can be easily installed and removed without tools.• Secure adhesion between the bezel and crystal as well as the use of an O-ringprevents water or oil penetration.• The spindle ...Readmore
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Standard Type | 0.001 ~ 0.01 | Dial | 1.1 to 5 ~ 6~20 | NA | NA | Continuous Scale / Balance Scale | - |
Days to Ship: Số ngày giao hàng: 46 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Dial Test Indicator SERIES 513 — Universal Type(Measuring Range: 0.8mm)
MITUTOYO
Universal application to all directions. (Not only the direction of the measuring point, but also the direction of measurement itself can be adjusted 360 degrees without moving the indicator.)
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Standard Type | - | Dial | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Dial Gauge, Contact Points - Needle point
MITUTOYO
Optional Accessory for Digimatic and Dial Indicators and Linear Gages
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Parts | - | - | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
ABSOLUTE Digimatic Indicator ID-SX SERIES 543
MITUTOYO
• Cost-effective oriented design ID-SX indicators use a button-type battery (SR44) and come with the minimum of functionality for ease of use. There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mmor inch-based measurement resolutions. • IP53 dust/water protection level The models listed below also provide IP53 dust/water protection level specifications:543 794/94B/95/95B/96/96B • ABS (absolute) sensor These D...Readmore
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Lever Type (Indicator) | - | Digital | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Dial Gauge, Dial Caliper Gauge (Inner)
NIIGATA SEIKI (SK)
Dial gauge for inner diameter measurement with a wide application range, including hole diameter measurement, special shape inner diameter measurement (groove), etc.[Features]· Useful for measuring hole diameters and special shape inner diameters.[Applications]· Inner diameter measuring instrument with a wide application range, including high-precision inner diameter measurement, special shape inner diameter measurement...Readmore
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Caliper Type | 0.01 ~ 0.025 | Dial | 6~20 ~ 51 to 100 | NA | NA | Continuous Scale | - |
From: 3,279,708 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
EC Counter SERIES 542 — Low-cost, Modular Type Display Unit
MITUTOYO
• 3 steps of limit setting value can be displayed.• Can be set to produce either tolerance judgment output or Digimatic output.• Small size (96 x 48mm) which conforms to DIN standards.
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - |
From: 5,445,000 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
MITUTOYO
• The ABS (absolute) sensor restores the last origin position automatically when the indicator is turned on. • Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increased due to elimination ofover speed errors. • Tolerance-judging measurement is available by setting upper and lower limit values. • Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery. • Equipped with a data output p...Readmore
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Lever Type (Indicator) | - | Digital | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: 46 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Dial Gauge, Dial Thickness Gauge (0.01 mm Type)
OZAKI MFG (PEACOCK)
[Features]· This dial thickness gauge is a handy type measuring instrument operated by a lever that can quickly measure the thickness of small components, rubber, felt, paper, and so on.· Select from a wide range of device models to suit the application.· The G and H types have Peacock's greatest feature, an integrated structure of the frame and gauge parts, with superior workability and durability
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Thickness type | 0.01 | Dial | 6~20 | - | - | Continuous Scale | - |
From: 1,913,884 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KROEPLIN
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Caliper Type | 0.01 | Digital | - | Available | - | - | - |
From: 23,438,629 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) |
You can add up to 6 items per a category to the compare list.
KROEPLIN
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Caliper Type | 0.005 ~ 0.05 | Dial | - | Available | - | - | - |
From: 19,306,996 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Dial Gauge, Digimatic Indicator ID-H Series 543
MITUTOYO
• This new-generation digital indicator offers the excellent accuracy and functionalityexpected from the top class of indicator.• Take advantage of its high accuracy backed up by 0.5μm/.00002” resolution,remote control functionality via a handheld controller (or an RS-232C interface) and easy run out measurements with the well-established analog bar display.• Functionality meets the needs of diverse measurement applications.
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Lever Type (Indicator) | - | Digital | - | - | - | - | - |
From: 13,252,500 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX Series 543
MITUTOYO
• The ABS (absolute) sensor restores the last origin position automaticallywhen the indicator is turned on.• Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increaseddue to elimination of over-speed errors.• Tolerance-judging measurement is available by setting upper and lower limit values.• Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery.• Equipped with a data output po...Readmore
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Standard Type | - | Digital | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: 46 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NIIGATA SEIKI (SK)
Dial gauge that is ideal for displacement measurements such as plane contour, workpiece mounting quality evaluation, shaft runout and perpendicularity, etc.[Features]· It is a high cost performance model with an easy-to-see digital display.· With hold function.· With auto off function. (Approximately 5 minutes)· Scale interval 0.01 mm, measurement range 12.7 mm.· Comes with two back covers, a flat type and a type with ...Readmore
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Standard Type | 0.01 | Digital | 6~20 | NA | NA | - | - |
From: 1,964,441 VND |
---|
Days to Ship: Số ngày giao hàng: Same day |
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
Replacement probe. (Entire threaded portion is M2.5 (P = 0.45) mm.)
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Probe | - | - | - | - | - | - | - |
From: 489,421 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Dial Gauge, Replacement Probe For PC
OZAKI MFG (PEACOCK)
Probe for Pic Test (switch lever type).
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Probe | - | - | - | - | - | - | - |
From: 195,145 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Dial Gauge, Dial Caliper Gauge LA (Outer) Type
OZAKI MFG (PEACOCK)
[Features]· A simple measuring instrument ideal for measuring outer diameter and thickness of parts that are generally considered to be difficult to measure.· Choose from a wide range of models with scale intervals of 0.1 mm, 0.05 mm, and 0.01 mm.· High precision with a wide measurement range.· We have produced many custom-made products according to customers' applications.
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Caliper Type | 0.01 ~ 0.1 | Dial | 6~20 ~ 101 or More | - | - | Continuous Scale | - |
From: 8,828,577 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Linear Gauge (10 to 20 mm Stroke Type)
OZAKI MFG (PEACOCK)
10 to 20 mm stroke type linear gauge.
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
linear gauge | 0.001 ~ 0.01 | - | 6~20 | - | - | - | - |
From: 7,985,044 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Dial Gauge, Pocket Type Dial Test Indicator Series 513
MITUTOYO
• Jeweled bearings assure higher sensitivity and accuracy. Indicator can be mounted by clamping the stem or the body (except for 513-517WE and 513-517WT). • Reversible measuring direction (Clutch type). • Two holding bars are supplied. (Full sets only.) • Fully adjustable bezel/dial face. • Stylus is adjustable within 220°. • Bezel is sealed with on O-ring to keep out water and oil.
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Standard Type | - | Dial | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Dial Gauge, Dial Caliper Gage Series 209 — Internal Measurement Type
MITUTOYO
Dial caliper gages are inside diameter measurement tools, which have a broader range of applications including the measurement of hole diameter and internal measurement of special shapes (grooves).
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
MITUTOYO
[Features]・ It can be attached to the dovetail of the test indicator for centering work over a wide range of diameters
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Parts | - | - | - | - | - | - | - |
From: 2,475,000 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
MAHR
[Features]· Fixing bracket (shank) removable structure allows the position to be freely changed.· Wear-resistant artificial gems are used for the entire internal shaft.· There are 2 mounting shafts, 6 mm and 8 mm, which can be removed.· Vibration-proof structure.· A structure in which the pointer's cover glass can be removed, eliminating time spent repairing any damage to the glass.· Fixing bracket (shank) removable structure enables ...Readmore
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Lever Type (Indicator) | 0.002 ~ 0.01 | Dial | 0–1 | - | - | Balance Scale | - |
From: 3,242,725 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
Replacement probe. (Entire threaded portion is M2.5 (P = 0.45) mm.)
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Probe | - | - | - | - | - | - | - |
From: 161,703 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
Replacement probe. (Entire threaded portion is M2.5 (P = 0.45) mm.)[Features]· Can be replaced with probes for Pic Test or New Pic Test.
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Probe | - | - | - | - | - | - | - |
From: 1,379,004 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Dial Gauge, ABSOLUTE Digimatic Indicator ID-SX Series 543(Measuring force(N): 2.5 or less)
MITUTOYO
• Cost-effective oriented design ID-SX indicators use a button-type battery (SR44) and come with the minimum of functionality for ease of use. There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mm or inch-based measurement resolutions. • IP53 dust/water protection level The models listed below also provide IP53 dust/ water protection level specifications: 543-794/94B/95/95B/96/96B • ABS (absolute) sensor Th...Readmore
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Standard Type | - | Digital | - | - | - | - | - |
From: 3,716,667 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Contact Points - Conical Point (Carbide)
MITUTOYO
Optional Accessory for Digimatic and Dial Indicators and Linear Gages
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Parts | - | - | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
ABSOLUTE Digimatic Indicator ID-F SERIES 543 — with Back-light LCD Screen
MITUTOYO
• GO/±NG judgment function: If a judgment result shows an out of tolerance condition, the display backlighting changes from green to red. • An analog bar indicator has been integrated to make upper/lower limit and turnover point reading more comfortable. • With Mitutoyo's ABSOLUTE Linear Encoder technology, once the measurement reference point has been set it will not be lost when the power is turned off. Also, reliability has been inc...Readmore
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Lever Type (Indicator) | - | Digital | - | - | - | - | - |
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Regular Dial Gauge 2 Series, Under 1 Turn Type
MITUTOYO
It is excellent in durability and impact resistance as it adopts Mitsutoyo's unique shock proof mechanism which uses cushioning mechanism. Dial gauge developed to prevent reading errors during multiple rotations.
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Standard Type | 0.001 ~ 0.1 | Dial | 0–1 ~ 1.1 to 5 | NA | NA | Balance Scale | - |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Dial Gauge 543 Series, Digimatic Indicator ID-H
MITUTOYO
World top level digital indicator that supports high accuracy and multi-functional measurement. Equipped with a wide range of functions that support diversified measurement requirements.
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Standard Type | 0.0005/0.001 switching | Digital | 21 to 50 | NA | Available | - | - |
From: 13,252,500 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
TECLOCK
Lever Test Features]Since the probe and pointer are nonmagnetic, they are not affected by magnetism.The probe can be set at an angle of 200° arc.[Specifications]Maximum Measurement Length (Range Selection):0-1mmScale type:Balanced ScaleMounting shaft diameter:6mmMeasured force:0.4N or less[Application]For various measurements such as outside, inside, inside the groove, centering.
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Lever Type (Indicator) | 0.002 ~ 0.01 | Dial | 0–1 | - | - | Balance Scale | - |
From: 2,885,679 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Standard Shaped Dial Gauge (Scale Interval: 0.001 mm)
OZAKI MFG (PEACOCK)
The most widely used dial gauge with scale intervals of 0.001/0.005 mm. Select from a wide range of devices to suit the application.[Features]· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.· Gears are protected from sudden upward pressure...Readmore
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Standard Type | 0.001 | Dial | 0–1 ~ 1.1 to 5 | Available | - | Continuous Scale / Balance Scale | - |
From: 2,704,500 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
Replacement probe. (Entire threaded portion is M2.5 (P = 0.45) mm.)
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Probe | - | - | - | - | - | - | - |
From: 196,006 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
Replacement probe. (Entire threaded portion is M2.5 (P = 0.45) mm.)
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Probe | - | - | - | - | - | - | - |
From: 1,683,722 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
Replacement probe. (Entire threaded portion is M2.5 (P = 0.45) mm.)
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Probe | - | - | - | - | - | - | - |
From: 1,192,038 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
Replacement probe. (Entire threaded portion is M2.5 (P = 0.45) mm.)
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Probe | - | - | - | - | - | - | - |
From: 986,351 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Dial Gauge, Pictest (Switch Lever Type, PC Series)
OZAKI MFG (PEACOCK)
[Features]· Lever-type dial gauge with switch lever.· Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.· The gauge damage prevention probe is provided on all models.· By adopti...Readmore
Application | Scale interval minimal display(mm) | Display Method | Maximum Measurement Length (Range Selection)(mm) | Waterproof Function | Output terminal for measuring data: with or without | Scale type | Calibration Certificate |
---|---|---|---|---|---|---|---|
Lever Type (Indicator) | 0.002 ~ 0.01 | Dial | 0–1 | Available | - | Balance Scale | - |
From: 2,477,289 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy