Chamfer, V-Grooves（Application：Hole Chamfer Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC

  OSG

  Long shank type that can be used for machining deep parts. Since a twisting flute is used, chattering does not occur even if the amount of protrusion is large.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.8 ～ 1	90	Hole Chamfer	Aluminum[◎] / Copper[◎] / Resin[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,892,711 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute Chamfering Cutter (positive type) HSCT-P

  OSG

  End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Hole Chamfer	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	Single blade	NA	NA	Non-Coated	-

  From: 2,373,708 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N

  OSG

  Negative type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	Single blade	NA	NA	Non-Coated	-

  From: 2,525,376 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P

  OSG

  Positive type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 2	90	Hole Chamfer	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	Single blade	NA	NA	Non-Coated	-

  From: 2,525,376 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Chamfering Endmill 3-Flute

  DIXI

  High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 12	90	Hole Chamfer	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	-	-	Available	TiAlN	-

  From: 1,213,881 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCCC AS Coated Carbide Center for Chamfering

  SANKO MFG

  Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	-	Available	Available	TiAlN	-

  From: 2,076,965 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GCCC, Carbide Center for Chamfering

  SANKO MFG

  [Features]· Melding the design concepts of endmills and drills, it is available for a wide range of applications.· Double angle adopted for the chamfer part.· Provides a clean finish with fewer burrs.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	-	Hole Chamfer	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	-	Available	NA	Non-Coated	-

  From: 1,780,115 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CC, Center for Chamfering

  SANKO MFG

  Center chamfering cutter used in a large variety of different applications.[Features]· As the outer diameter and shank have the same diameter, interference with the workpiece can be avoided.· Used in a large variety of different applications.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	6 ～ 32	-	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	-	Available	NA	Non-Coated	-

  From: 1,082,744 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° Carbide

  IWATA TOOL

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1.2 ～ 16	60	Hole Chamfer	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 1,544,838 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° Carbide DLC Coating

  IWATA TOOL

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	2 ～ 16	60	Hole Chamfer	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	DLC	-

  From: 2,451,912 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide Long Type

  IWATA TOOL

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Hole Chamfer	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	NA	-	-

  From: 1,544,838 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 90° Carbide Long Type DLC Coating

  IWATA TOOL

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 12	90	Hole Chamfer	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	NA	Available	DLC	-

  From: 2,451,912 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Sharp SP 60° ALD Coating

  IWATA TOOL

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.6 ～ 4	60	Hole Chamfer	Quenched and tempered steel[○] / high hardness steel[○]	Single blade	NA	Available	Other	-

  From: 2,149,554 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Hard SP 90° ALD Coating

  IWATA TOOL

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.6 ～ 4	90	Hole Chamfer	Quenched and tempered steel[○] / high hardness steel[○]	Single blade	NA	Available	Other	-

  From: 1,847,196 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Toglon Miniature Hard SP 90° ALT Coating

  IWATA TOOL

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.1 ～ 1.5	90	Hole Chamfer	Quenched and tempered steel[○] / high hardness steel[○]	Single blade	NA	Available	ALT	-

  From: 1,937,884 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CMC MC Chamfering Cutter G2

  ASAHI TOOLS

  Brazing shape, angle tolerance ±15'.Maintaining shape accuracy with a straight cutting edge.Applications, Hole chamfering/chamfering/horizontal running Work material, General steel/Heat-treated steel/Stainless steel/Cast iron/Aluminum/Copper/ResinSingle-edge blade2 blades

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	10 ～ 60	60 ～ 90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	Available	NA	Non-Coated	-

  From: 3,140,566 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CS1S Type I Chamfering Cutter (Drilling Type), Straight Shank

  OKAZAKI SEIKO

  Work Material Aluminum/CopperTool Grade, Cobalt High-Speed SteelTip angle (θ) 90With or without coating: with coatingCoating type, TiN

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	10 ～ 30	90	Hole Chamfer	Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: 659,106 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CS2S Type II Chamfering Cutter (Single Flute), Straight Shank

  OKAZAKI SEIKO

  [Features]・ One-Flute Type・ For steel, stainless steel· All products are TiN coated

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Cobalt HSS	26 ～ 66	90	Hole Chamfer	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	NA	Available	TiN	-

  From: 1,943,195 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVMA Chamfering Mill, OK Coated

  OKAZAKI SEIKO

  In addition to chamfering of holes, horizontal feed cutting such as V-grooving, chamfer milling is also possible.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90 ～ 120	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	Available	Available	TiAlN	-

  From: 1,926,081 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Umbrella-type cutter with handle PCS

  EIKOSHA

  [Features]· Front (with end blade) cutting and chamfering are possible.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel / Cobalt HSS	15 ～ 100	60 ～ 90	Hole Chamfer	general steel[○] / Aluminum[○] / Copper[○]	-	-	NA	-	-

  From: 1,782,418 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Tool CFT (SKH57)

  TAIYO-TOOL

  [Applications]・ Hole chamfer・ [Single-edged / doubled-edged]・ Single-Edged[Tool material type]・ High-speed steel[Coating Y/N]・ N/A[Coating type]・ Uncoated[Number of flutes]・ 1-flute

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	10 ～ 20	60 ～ 90	Hole Chamfer	-	Single blade	-	NA	Non-Coated	-

  From: 2,867,541 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outside Chamfering Cutter (Nice Guy) NGC (SKH51)

  TAIYO-TOOL

  [Applications]・ Hole chamfer[Single-edged / doubled-edged]・ Single-Edged[Tool material type]・ High-speed steel[Coating Y/N]・ N/A[Coating type]・ Uncoated

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  High-speed steel	25 ～ 55	-	Hole Chamfer	-	Single blade	-	NA	Non-Coated	-

  From: 4,454,820 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Chamfer

  CARMEX

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	3	150	Hole Chamfer	-	-	-	-	-	-

  From: 2,026,615 VND
  Days to Ship: Số ngày giao hàng: 23 Day(s)

  23 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Chamfer (A60)

  CARMEX

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	2 ～ 4.5	60	Hole Chamfer	-	-	-	-	-	-

  From: 2,071,583 VND
  Days to Ship: Số ngày giao hàng: 23 Day(s)

  23 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Chamfer (A45)

  CARMEX

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	3	45	Hole Chamfer	-	-	-	-	-	-

  From: 1,914,517 VND
  Days to Ship: Số ngày giao hàng: 23 Day(s)

  23 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  SPEED/T, 2-flute, Multi 90°

  Poulten&Graf

  [Features]· Blade diameters φ10 or less are high rigidity types with thick shank diameter.· A high-lubricity AlTiN coated tool that is ideal for soft materials with a hardness of HRC 45 or less, such as raw materials or stainless steel. Handy to have one in a magazine rack.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  -	3 ～ 20	90	Hole Chamfer	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	Double-edged	Available	Available	Other	-

  From: 921,153 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	90	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,168,698 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	60	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,906,958 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	1 ～ 20	120	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,906,958 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,601,146 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	120	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,601,146 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	60	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	90	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide V Cut End Mill Long Type Coated Series AMVL 120°

  MAKOTOLOY

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 20	120	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 3,109,123 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	60	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,370,248 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	90	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,370,248 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	120	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	NA	-	-

  From: 2,370,248 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	60	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,752,725 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	90	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,752,725 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°

  MAKOTOLOY

  [Features]· A small but high quality end mill that can also be used with high precision machining technology.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	0.3 ～ 0.9	120	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiAlN	-

  From: 2,752,725 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Standard Type, TiN Coat, 90°

  MAKOTOLOY

  [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	90	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: 2,607,406 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Standard Type, TiN Coat, 120°

  MAKOTOLOY

  [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	120	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: 2,607,406 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Long Type, TiN Coat, 90°

  MAKOTOLOY

  [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	90	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: 3,362,911 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Spot Carbide Drill, Long Type, TiN Coat, 120°

  MAKOTOLOY

  [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.

  Tool Material Type	Tool Diameter (D)(mm)	Tip angle (θ)	Application	work material	Single blade, two blades	Peripheral Blade Y/N	Coating Y/N	Coating Type	R Size (R)(mm)
  Carbide	3 ～ 25	120	Hole Chamfer	general steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Available	TiN	-

  From: 3,362,911 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	OSG	OSG	OSG	DIXI	SANKO MFG	SANKO MFG	SANKO MFG	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	ASAHI TOOLS	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	EIKOSHA	TAIYO-TOOL	TAIYO-TOOL	CARMEX	CARMEX	CARMEX	Poulten&Graf	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY	MAKOTOLOY
Product SeriesDòng sản phẩm	2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC	3-flute Chamfering Cutter (positive type) HSCT-P	3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N	3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P	Carbide Solid Chamfering Endmill 3-Flute	SAGCCC AS Coated Carbide Center for Chamfering	GCCC, Carbide Center for Chamfering	CC, Center for Chamfering	Toglon Sharp SP 60° Carbide	Toglon Sharp SP 60° Carbide DLC Coating	Toglon Sharp SP 90° Carbide Long Type	Toglon Sharp SP 90° Carbide Long Type DLC Coating	Toglon Sharp SP 60° ALD Coating	Toglon Hard SP 90° ALD Coating	Toglon Miniature Hard SP 90° ALT Coating	CMC MC Chamfering Cutter G2	CS1S Type I Chamfering Cutter (Drilling Type), Straight Shank	CS2S Type II Chamfering Cutter (Single Flute), Straight Shank	SVMA Chamfering Mill, OK Coated	Umbrella-type cutter with handle PCS	Chamfering Tool CFT (SKH57)	Outside Chamfering Cutter (Nice Guy) NGC (SKH51)	Mini Chamfer	Mini Chamfer (A60)	Mini Chamfer (A45)	SPEED/T, 2-flute, Multi 90°	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°	V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°	V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°	V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°	Carbide V Cut End Mill Long Type Coated Series AMVL 120°	V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°	V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°	V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°	V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°	V Spot Carbide Drill, Standard Type, TiN Coat, 90°	V Spot Carbide Drill, Standard Type, TiN Coat, 120°	V Spot Carbide Drill, Long Type, TiN Coat, 90°	V Spot Carbide Drill, Long Type, TiN Coat, 120°
CADCAD
From	2,892,711 VND	2,373,708 VND	2,525,376 VND	2,525,376 VND	1,213,881 VND	2,076,965 VND	1,780,115 VND	1,082,744 VND	1,544,838 VND	2,451,912 VND	1,544,838 VND	2,451,912 VND	2,149,554 VND	1,847,196 VND	1,937,884 VND	3,140,566 VND	659,106 VND	1,943,195 VND	1,926,081 VND	1,782,418 VND	2,867,541 VND	4,454,820 VND	2,026,615 VND	2,071,583 VND	1,914,517 VND	921,153 VND	2,168,698 VND	2,906,958 VND	2,906,958 VND	2,601,146 VND	2,601,146 VND	3,109,123 VND	3,109,123 VND	3,109,123 VND	2,370,248 VND	2,370,248 VND	2,370,248 VND	2,752,725 VND	2,752,725 VND	2,752,725 VND	2,607,406 VND	2,607,406 VND	3,362,911 VND	3,362,911 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	Same day or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	23 Day(s)	23 Day(s)	23 Day(s)	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	Cobalt HSS	Carbide	High-speed steel / Cobalt HSS	High-speed steel	High-speed steel	-	-	-	-	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
Tool Diameter (D)(mm)	0.8 ～ 1	1 ～ 2	1 ～ 2	1 ～ 2	2 ～ 12	3 ～ 20	3 ～ 20	6 ～ 32	1.2 ～ 16	2 ～ 16	3 ～ 12	3 ～ 12	0.6 ～ 4	0.6 ～ 4	0.1 ～ 1.5	10 ～ 60	10 ～ 30	26 ～ 66	3 ～ 20	15 ～ 100	10 ～ 20	25 ～ 55	3	2 ～ 4.5	3	3 ～ 20	1 ～ 20	1 ～ 20	1 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9	0.3 ～ 0.9	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25
Tip angle (θ)	90	90	90	90	90	-	-	-	60	60	90	90	60	90	90	60 ～ 90	90	90	90 ～ 120	60 ～ 90	60 ～ 90	-	150	60	45	90	90	60	120	60	120	60	90	120	60	90	120	60	90	120	90	120	90	120
Application	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer	Hole Chamfer
work material	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Quenched and tempered steel[○] / high hardness steel[○]	Quenched and tempered steel[○] / high hardness steel[○]	Quenched and tempered steel[○] / high hardness steel[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Aluminum[○] / Copper[○]	-	-	-	-	-	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Cast Iron[○] / Aluminum[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	-	-	-	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	Single blade	-	-	-	Double-edged	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade
Peripheral Blade Y/N	NA	NA	NA	NA	-	Available	Available	Available	NA	NA	NA	NA	NA	NA	NA	Available	NA	NA	Available	-	-	-	-	-	-	Available	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Coating Y/N	NA	NA	NA	NA	Available	Available	NA	NA	NA	Available	NA	Available	Available	Available	Available	NA	Available	Available	Available	NA	NA	NA	-	-	-	Available	NA	Available	Available	NA	NA	Available	Available	Available	NA	NA	NA	Available	Available	Available	Available	Available	Available	Available
Coating Type	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiAlN	Non-Coated	Non-Coated	-	DLC	-	DLC	Other	Other	ALT	Non-Coated	TiN	TiN	TiAlN	-	Non-Coated	Non-Coated	-	-	-	Other	-	TiAlN	TiAlN	-	-	TiAlN	TiAlN	TiAlN	-	-	-	TiAlN	TiAlN	TiAlN	TiN	TiN	TiN	TiN
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…