(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
184 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
ONISHI MANUFACTURING
[Features]· Impact drill compatible hexagonal shaft drilling tool for simultaneous pilot hole drilling and thread cutting work.[Applications]· For formation and modification of through-hole threads.· Work materials: Iron, aluminum, brass.[Features]· 1 unit enables pilot hole machining and thread cutting at the same time.· 6.35 mm hex shaft finish that supports impact drivers.· Drill cutting edge with good bite due to X-type thinning and outstanding sharpness
From: 797,501 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
TRUSCO NAKAYAMA
[Features]· High-speed tapping is possible.· Oxidization treated.[Applications]· For through hole finish work.· Work materials: General steel, low-medium carbon steel, alloy steel.
From: 251,488 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
C.T.G Thick Steel Cable Conduits Screw Tap
SKC
It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiency
From: 1,893,032 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Screw Thread Die For Gas Pipes, Taper NPT
SKC
[Features]Screw thread (die) used for machining male threads for American pipes in gas pipes.
From: 1,219,166 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Gas Pipe Solid Die Parallel NSP
SKC
[Features]Screw thread (die) used for machining male threads for American pipes in gas pipes.
From: 592,605 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 137,181 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
[Features]· Ultra-high-speed machining and mist or dry machining is possible with a side through-hole shape adopted.· Suitable for through-holes in cast aluminum, can be used both horizontally and vertically, and can be used for dry machining and ultra-high speed machining.
From: 679,270 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for American Taper Pipe Threads_NPT
YAMAWA MFG
Tap for machining American taper pipe "NPT" female threads.[Features]· The groove is a straight hand tap type. Comes with three biting teeth at the tip.· General-purpose tap for general steel materials.[Applications]· To be used when machining American tapered pipe thread for pipes "NPT" female thread.* American standard pipe threads, available in many types, can be complicated.* Check carefully when purchasing taps, as there are various kinds available such as "NPT", "NPTF", "NPS", and "NPSF".
From: 609,510 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Left Hand Threads_PO-LH
YAMAWA MFG
Point tap suitable for machining through holes.[Features]· The grooves on the cutting edge side of the biting part are cut obliquely to push the chips forward.· Causes less trouble due to chips.· The cutting torque is low.[Applications]· Can process both synchronously and asynchronously.· Suitable for drilling through holes.
From: 309,680 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Taps for Taper Pipe Threads Short (ℓg) Type_S-PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
From: 502,618 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Speed Tapping_F-SP
YAMAWA MFG
Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.
From: 555,898 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX
YAMAWA MFG
It is suitable for tapping high carbon steel such as S55C. Has undergone oxidation treatment.
From: 160,050 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Short Spiral Fluted Taps, Deep Hole Use_S-SP
YAMAWA MFG
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.[Features]· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.· Oxide treatment (OX treatment) applied to prevent welding.[Applications]· Optimal for deep thread machining to 2.5 times the nominal diameter or more.
From: 227,014 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Tough Stainless Steels_SU2-SP
YAMAWA MFG
Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.
From: 199,650 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes Interlap Type (PT) EX-IRT-PT
OSG
[Specifications]· Shape: Pipe tap· Screw type: pipe taper· Coating: Non-Coated· Work Material: Low-Carbon Steel (less than 0.25% carbon alloy) [○] / Stainless Steel (SUS) [◎] / Cast Steel (SC) [○]
From: 772,088 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
From: 392,550 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
From: 926,376 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
From: 444,070 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) |
You can add up to 6 items per a category to the compare list.
Spiral Tap TiN coated with Long Shank_TIN-LT-SFT
OSG
It is suitable for tapping low/medium carbon steel and stainless steel using a water-soluble cutting oil for applications where the thread length is 2D or less.
From: 638,355 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Tap High-Speed Synchronizing Tap HS-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.
From: 748,333 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Tap for Mild Steels and Deep Holes with Long Shank_LT-MS-DH-SFT
OSG
It is suitable for cases where tap damage due to cutting chip clogging at the blind hole and gnawing, etc., of female threads are likely to occur.
From: 487,077 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
Spiral Tap with Oil Holes OIL-SFT
OSG
Effective for horizontal blind holes and deep hole machining. The lubrication holes allow the cutting oil to act on the cutting edge, enabling high-speed, high-precision tapping.
From: 1,144,121 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
From: 381,118 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
CPM Straight Flutes Tap_CPM-HT
OSG
Work material ideal for forging high carbon steel, tool steel, steel alloy, or female thread machining with a hardness of 20 to 45 HRC for tempering
From: 372,081 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Planet Cutter Series MC - Planet Cutter PNGT
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
From: 6,905,394 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC
OSG
Enables efficient chip discharge by discharging cutting fluid from the oil holes.
From: 5,876,603 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Pointed Tap TiN coated with Long Shank_TIN-LT-POT
OSG
It can be applied to a wide range of work materials, but is particularly suitable for high-speed tapping of through holes such as stainless steel and tempered materials.
From: 621,830 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Pointed Tap V coated with Long Shank_V-LT-POT
OSG
Can be widely applied from flexible materials to rigid materials. Especially, it shows excellent performance under high speed and high dilution (water-soluble cutting oil) tapping conditions. Also effective for dry tapping.
From: 711,530 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT
OSG
Dedicated to machines with a complete lead feed mechanism, suitable for high-speed, high-precision thread machining.
From: 663,593 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes Spiral Tap, Long Shank LT-SFT-TPT
OSG
It is used to machine female tapered pipe threads, and it is suitable for blind holes and machining conditions where cutting chip clogging is likely to occur.
From: 1,255,365 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Spiral Taper Pipe Thread Tap (Short Thread)_SFT-S-TPT
OSG
It is used to machine female tapered pipe threads, and it is suitable for blind holes and machining conditions where cutting chip clogging is likely to occur.
From: 810,336 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap for General Application (with OX)_H-TPT
OSG
Used to machine female tapered pipe threads. Long screw type mainly used for connecting pipe-shaped products
From: 605,306 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
Taper Tap for Pipes General Use Short Screw, Long Shank LT-S-TPT
OSG
Used to machine female tapered pipe threads. Long screw type mainly used for connecting pipe-shaped products
From: 1,443,333 VND |
---|
Days to Ship: Số ngày giao hàng: Quote |
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap for General Application (with OX, Short Thread)_H-S-TPT
OSG
Used to machine female tapered pipe threads. Short screw type used for tapping of short thread section such as elbows and teeth
From: 734,111 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
Parallel Taper Tap for Pipes Spiral Tap SFT-SPT
OSG
A spiral shape type is available for the blind hole according to the workpiece shape.
From: 726,288 VND |
---|
Days to Ship: Số ngày giao hàng: 20 Day(s) |
You can add up to 6 items per a category to the compare list.
Parallel Pipe Thread Tap for General Application (with OX)_H-SPT
OSG
This is a general-purpose steam oxide treatment power strip used for machining the female threads of parallel pipe threads.
From: 1,809,825 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MACHINING CENTER Tap (Normal Length)_EX-S-MCT
OSG
Stable performance can be obtained by suppressing the cutting chips from getting caught that tends to occur in the horizontal machining center.
From: 394,265 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MACHINING CENTER Tap with Long Shank_EX-MCT
OSG
Stable performance can be obtained by suppressing the cutting chips from getting caught that tends to occur in the horizontal machining center.
From: 1,031,725 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hexagonal Shaft Spiral Tap (for Through Hole / Blind Hole)
ONISHI MANUFACTURING
[Features]· Uses HSS that features excellent abrasion resistance.· Can be attached to impact screwdriver models capable of forward and reverse rotation to easily drill screw holes.· Cutting chips are discharged upwards due to the spiral groove
From: 407,033 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Hexagonal Shaft Tap (for Through Hole)【1-3 Pieces Per Package】
ONISHI MANUFACTURING
From: 228,784 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Hand Tap (for Metric Screws/HSS-E)
TRUSCO NAKAYAMA
[Features]· Can be used for both through holes and blind holes.[Applications]· Work materials: General steel, low/medium carbon steel, alloy steel.
From: 158,000 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
SU Spiral Flute Tap for Stainless Steel
SKC
[Specifications]· Shape: Spiral tap· Screw type: metric· Work materials:Low-Carbon Steel (less than 0.25% carbon alloy) [○] /Medium carbon steel (carbon content 0.25 to 0.45%) [O]/High Carbon Steel (C content over 0.45%) [○] /Stainless Steel (SUS) [◎] /Tempered steel (25 to 35 HRC)[O]/Tool Steel (Before SKD Hardening) [○] /Cast Steel (SC)[O]/Cast Iron (FC)[O]/Ductile Cast Iron (FCD) [○] /Copper (Cu) [○] /Brass (Bs) [○] /Brass cast iron (BsC) [○] /Bronze (PB) [○] /Aluminum Rolled Material (AL) [○] /Aluminum Alloy Casting (AC, ADC) [○] /Zinc Alloy Casting (ZDC) [○]· Material Details: SKH
From: 671,346 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SKC
[Applications]It can be used to tap threaded holes in tire valves.[Features]High speed steel with excellent heat resistance and thermal damage resistance is used.
From: 820,753 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Hand Tap, for Metric Fine Threads (Angle: 60°)
SKC
[Applications]It can be used for engraving thread grooves of fine threads.[Features]For right-hand threads.
From: 1,135,641 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP
YAMAWA MFG
Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Also suitable for horizontal/vertical machining of blind holes in materials such as carbon steel and alloy steel.
From: 679,270 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Screw size (Nominal) |
Screw Types |
work material |
Pitch (P), Number of Threading(mm) |
Tool Material Type |
Tap Type |
Hole type |
Chamfer threads (Lcf) |
Coating Type |
Coating Y/N |
Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | ONISHI MANUFACTURING | TRUSCO NAKAYAMA | SKC | SKC | SKC | ISHIHASHI | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | ONISHI MANUFACTURING | ONISHI MANUFACTURING | TRUSCO NAKAYAMA | SKC | SKC | SKC | YAMAWA MFG |
Product SeriesDòng sản phẩm | Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX | Spiral Tap for Mild Steels and Deep Holes with Long Shank_LT-MS-DH-SFT | Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC | Taper Pipe Thread Tap for General Application (with OX)_H-TPT | Taper Tap for Pipes General Use Short Screw, Long Shank LT-S-TPT | Taper Pipe Thread Tap for General Application (with OX, Short Thread)_H-S-TPT | Parallel Pipe Thread Tap for General Application (with OX)_H-SPT | Hexagonal Shaft Tap (for Through Hole)【1-3 Pieces Per Package】 | For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP | ||||||||||||||||||||||||||||||||||||
From | 797,501 VND | 251,488 VND | 1,893,032 VND | 1,219,166 VND | 592,605 VND | 137,181 VND | 679,270 VND | 609,510 VND | 309,680 VND | 502,618 VND | 555,898 VND | 160,050 VND | 227,014 VND | 199,650 VND | 772,088 VND | 392,550 VND | 926,376 VND | 444,070 VND | 638,355 VND | 748,333 VND | 487,077 VND | 1,144,121 VND | 381,118 VND | 372,081 VND | 6,905,394 VND | 5,876,603 VND | 621,830 VND | 711,530 VND | 663,593 VND | 1,255,365 VND | 810,336 VND | 605,306 VND | 1,443,333 VND | 734,111 VND | 726,288 VND | 1,809,825 VND | 394,265 VND | 1,031,725 VND | 407,033 VND | 228,784 VND | 158,000 VND | 671,346 VND | 820,753 VND | 1,135,641 VND | 679,270 VND |
Days to ShipSố ngày giao hàng | 9 Day(s) | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) | 6 Day(s) or more | 20 Day(s) or more | 20 Day(s) | 20 Day(s) | 20 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 20 Day(s) | Quote | 20 Day(s) | 20 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 9 Day(s) | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
Screw size (Nominal) | M3 ~ M6 | M3 ~ M16 | CTG-54 ~ CTG-16 | NPT3/8 | NPS1 ~ NPS7/8 | 1/2UN ~ M20 | M6 ~ M20 | 1'-11.5 ~ 3/8-18 | 1/2-20UNF ~ M30 | 1/2-14 ~ 3/8-19 | M3 ~ M12 | M3 ~ M16 | M2 ~ M45 | M3 ~ M24 | R1 ~ R7/8 | PF1 ~ PF3/8 | PS1-1/2 ~ PS3/8 | M4 | M3 ~ M16 | M5 ~ M10 | M6 | M10 | M4 ~ M6 | M6 ~ M16 | - | - | M3 ~ M24 | M4 ~ M6 | M3 ~ M14 | R1/2 ~ R3/8 | R1 ~ R3/8 | R1/8 ~ R1/16 | R1 ~ R3/8 | R1/4 ~ R1/16 | R1/4 | G1/2 ~ G3/4 | M8 ~ M22 | M10 ~ M12 | M6 ~ M10 | M3 ~ M4 | M3 ~ M16 | M10 ~ M14 | TV8 | M13 | M6 ~ M20 |
Screw Types | Meter | Meter | Other | - | - | Meter / unified | Meter | Taper for Pipe | Meter / unified / Whitworth | Taper for Pipe | Meter | Meter | Meter | Meter | Taper for Pipe | Parallel for Pipes | Parallel for Pipes | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Taper for Pipe / Parallel for Pipes | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Parallel for Pipes | Meter | Meter | Meter | Meter | Meter | Meter | - | Meter | Meter |
work material | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[◎] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[◎] | Steel casting (SC)[◎] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[◎] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[◎] | Steel casting (SC)[○] | Steel casting (SC)[◎] | Steel casting (SC)[◎] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] | Steel casting (SC)[○] |
Pitch (P), Number of Threading(mm) | 0.5 ~ 1 | 0.5 ~ 2 | 11 ~ 14 | 18 | 11 1/2 ~ 28 | 0.4 ~ 28 | 1 ~ 1.75 | - | 0.5 ~ 3 | - | 0.5 ~ 1.75 | 0.5 ~ 2 | 0.4 ~ 4.5 | 0.5 ~ 3 | 11 ~ 28 | 11 ~ 28 | 11 ~ 28 | 0.7 | 0.5 ~ 2 | 0.8 ~ 1.5 | 1 | 1.5 | 0.7 ~ 1 | 1 ~ 1.75 | 1 ~ 19 | 0.5 ~ 3 | 0.5 ~ 3 | 0.7 ~ 1 | 0.5 ~ 2 | 14 ~ 28 | 11 ~ 28 | 28 | 11 ~ 28 | 19 ~ 28 | 19 | 14 | 1.25 ~ 2.5 | 1.5 | 1 ~ 1.5 | 0.5 ~ 0.7 | 0.5 ~ 2 | 1.5 ~ 2 | 32 | 0.5 | 1 ~ 1.75 |
Tool Material Type | High-speed steel | Vanadium High-Speed Steel | High-speed steel | - | - | - | Cobalt HSS | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Cobalt HSS | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | - | High-speed steel | - | Cobalt HSS |
Tap Type | Thread-cutting-related tool | Point tap | Tap for pipes | Die | Die | Hand Tap | Spiral Tap | Tap for pipes | Point tap | Tap for pipes | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Tap for pipes | Tap for pipes | Tap for pipes | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Hand Tap | Thread cutter | Thread cutter | Point tap | Point tap | Point tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Thread-cutting-related tool | Hand Tap | Spiral Tap | Point tap | Hand Tap | Spiral Tap |
Hole type | For through hole | For through hole | - | - | - | - | For through hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | - | - | - | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | - | For blind hole | - | For through hole / For blind hole |
Chamfer threads (Lcf) | - | 5P | - | - | - | 1.5P ~ 9P | 5P | 3P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 3P | 2.5P | 4 | 2.5P | 2.5 | 2.5P | 3P | 2.5P | 2.5P | 1.5P | 2P ~ 5P | - | - | 5P | 5P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 1.5P ~ 4P | 3P | 3P | - | - | 1.5P ~ 9P | - | - | 5P | 2.5P |
Coating Type | Non-Coated | - | - | - | - | Non-Coated | TiCN | - | - | - | TiN | - | - | - | Non-Coated | - | - | - | TiN | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | TiAlN | TiN | TiCN | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | Non-Coated | - | TiCN |
Coating Y/N | NA | - | - | - | - | NA | Available | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | - | Available | Available | NA | NA | NA | NA | Available | Available | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | - | Available |
Overall Length (L)(mm) | 66 ~ 69 | 46 ~ 95 | 80 ~ 120 | - | - | 40 ~ 105 | 62 ~ 105 | 54 ~ 120 | 46 ~ 135 | 55 ~ 85 | 46 ~ 82 | 46 ~ 95 | 42 ~ 180 | 46 ~ 120 | 55 ~ 95 | 55 ~ 95 | 55 ~ 110 | 52 | 100 ~ 150 | 60 ~ 75 | 120 | 120 | 100 | 62 ~ 95 | 80 ~ 210 | 60 ~ 120 | 100 ~ 200 | 100 | 46 ~ 88 | 100 ~ 150 | 55 ~ 95 | 55 | 100 ~ 150 | 55 ~ 62 | 62 | 80 ~ 85 | 70 ~ 115 | 150 | 70 | 70 ~ 70/70/70 | 46 ~ 95 | - | 70 | - | 62 ~ 105 |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy