Phoenix Head Replaceable Type Drills（Coating Y/N：Available）

• You can add up to 6 items per a category to the compare list. Compare

  

  WDX Drill, for 2D Machining Depth

  SUMITOMO ELECTRIC HARDMETAL

  SumiDrill WDX type is capable of stable drilling regardless of the work material from general steel to stainless steel and aluminum alloy due to its excellent cutting balance.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  13 ～ 68	88 ～ 246	29 ～ 144	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	-	-	Available	Available	TiAlN

  From: 8,293,697 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Magic Drill DRA Type Tip

  KYOCERA

  It is an insert for MagicDrill DRA type that has high centripetal force with a special 2-step tip angle and achieves excellent cylindricity, roundness and surface roughness in steel machining.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  7.94 ～ 25.5	-	-	general steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎]	-	-	-	Available	-

  From: 1,399,565 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Multi Drill Head SMDT-MTL

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ A highly precise and high-strength head replacement drill bit with radial serrations.・ Uses a special surface treatment that excels in abrasion resistance and rust prevention.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.・ The large cutting edge treatment reduces damage to the cutting edge.・ With X-type thinning, stable drilling is achieved with excellent centripetal force when biting.[Applications]・ Ideal for high efficiency machining of general steel.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  17 ～ 23.5	-	-	general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎]	-	-	Available	Available	For High Hardness (Silicon Group)

  From: 2,058,015 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WDX Drill, for 5D Machining Depth

  SUMITOMO ELECTRIC HARDMETAL

  SumiDrill WDX type is capable of stable drilling regardless of the work material from general steel to stainless steel and aluminum alloy due to its excellent cutting balance.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  13 ～ 36	127 ～ 278	68 ～ 184	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	-	-	Available	Available	TiAlN

  From: 10,901,805 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WDX Drill, for 4D Machining Depth

  SUMITOMO ELECTRIC HARDMETAL

  SumiDrill WDX type is capable of stable drilling regardless of the work material from general steel to stainless steel and aluminum alloy due to its excellent cutting balance.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  13 ～ 63	114 ～ 362	55 ～ 260	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	-	-	Available	Available	TiAlN

  From: 10,032,305 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Multi Drill, SMDH-D, for 8D

  SUMITOMO ELECTRIC HARDMETAL

  A standard head replacement drill bit, a decisive factor for reducing drilling costs.[Features]・ A highly precise and high-strength head replacement drill bit with unique radial serration fastening.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  13.5 or more and 14.5 or less ～ Over 41.0, and 42.5 or less	191.5 ～ 460	124.5 ～ 360	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	-	-	Available	Available	For High Hardness (Silicon Group)

  From: 11,601,537 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Multi Drill, SMDH-L, for 5D

  SUMITOMO ELECTRIC HARDMETAL

  A standard head replacement drill bit, a decisive factor for reducing drilling costs.[Features]・ A highly precise and high-strength head replacement drill bit with unique radial serration fastening.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  12.0 or more, less than 12.5 ～ Over 41.0, and 42.5 or less	130 ～ 335	69 ～ 235	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	-	-	Available	Available	For High Hardness (Silicon Group)

  From: 9,069,559 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WDX Drill, for 3D Machining Depth

  SUMITOMO ELECTRIC HARDMETAL

  SumiDrill WDX type is capable of stable drilling regardless of the work material from general steel to stainless steel and aluminum alloy due to its excellent cutting balance.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  13 ～ 143	101 ～ 314	42 ～ 212	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	-	-	Available	Available	TiAlN

  From: 8,717,628 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Head Interchangeable Drill PXD Head PXD-KC

  OSG

  [Specifications]· Shape: Insert (for drilling)· Coating: WDI· Work Material: General Steel, Tempering Steel, Cast Iron

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  14 ～ 25.4	-	-	general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]	-	-	-	Available	Other

  From: 1,744,090 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for HT800WP Only 4111

  GUHRING

  It is an insert for pilot hole with 145° tip angle.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	-	-	Carbide	NA	Available	Other

  From: 2,173,853 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for HT800WP Only 4112

  GUHRING

  A widely applicable insert used for materials from general steel to stainless steel.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	general steel[○]	-	Carbide	NA	Available	Other

  From: 2,300,946 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Head Interchangeable Drill PXD Head PXD-PC

  OSG

  [Specifications]· Shape: Insert (for drilling)· Coating: WDI· Work Material: General Steel, Tempering Steel, Cast Iron

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  14 ～ 25.4	-	-	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○]	-	-	-	Available	Other

  From: 1,744,090 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Multi Drill, SMDH-B3 (for bridge)

  SUMITOMO ELECTRIC HARDMETAL

  A multi-drill (for bridges) for SMD Series that achieves secure and strong clamping through unique radial serration and adopts a special surface treatment with excellent abrasion resistance and rust prevention.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  24.5～24.7 ～ 26.5～26.7	170 ～ 175	87 ～ 92	general steel[○]	-	-	Available	Available	For High Hardness (Silicon Group)

  From: 10,233,352 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Multi Drill, SMDH-M, for 3D

  SUMITOMO ELECTRIC HARDMETAL

  A standard head replacement drill bit, a decisive factor for reducing drilling costs.[Features]・ A highly precise and high-strength head replacement drill bit with unique radial serration fastening.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  12.5 or more, less than 13.0 ～ Over 39.5, and 41.0 or less	105 ～ 230	44 ～ 135	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	-	-	Available	Available	For High Hardness (Silicon Group)

  From: 8,048,584 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Multi Drill, SMDT-MEL Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ A highly precise and high-strength head replacement drill bit with radial serrations.・ Uses a special surface treatment that excels in abrasion resistance and rust prevention.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.・ The large thinning angle solves the defect of convex radius part peculiar to mild steel. With SUS material, welding defects at various parts are reduced.・ It improves the cutting performance of the outer periphery and prevents the occurrence of edge chipping at the cast iron hole exit.[Applications]・ Ideal for mild steel, gray cast iron, low rigidity equipment and difficult-to-cut materials such as stainless steel.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  19.5 ～ 22	-	-	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	-	-	Available	Available	For High Hardness (Silicon Group)

  From: 2,223,753 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TA-EZ Drill TEZD-MS Type

  DIJET

  [Features]Tips for exchanging cuttings type drills with easy tip replacement and excellent cutting performance.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  14 ～ 32	-	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	-	-	-	Available	Other

  From: 1,929,425 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for HT800WP Only 4113

  GUHRING

  Insert dedicated for cast iron.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	Cast Iron[○]	-	Carbide	NA	Available	Other

  From: 2,402,541 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for HT800WP Only 4115

  GUHRING

  [Features]· A dedicated insert for use with stainless steel.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	Stainless Steel[○]	-	Carbide	NA	Available	Other

  From: 2,580,631 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for HT800WP Only 7632

  GUHRING

  Chamfer blade insert for cast iron.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	-	-	Carbide	NA	Available	TiAlN

  From: 1,045,946 VND
  Days to Ship: Số ngày giao hàng: 26 Day(s) or more

  26 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for HT800WP Only 7645

  GUHRING

  An insert for chamfering blade which can be widely applied from general steel to stainless steel.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	-	-	Carbide	NA	Available	TiN

  From: 1,045,946 VND
  Days to Ship: Số ngày giao hàng: 26 Day(s) or more

  26 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tip for RT800WP Only 2485

  GUHRING

  FIRE coated RT blade tip dedicated for RT800WP.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  34 ～ 40.5	-	-	-	-	Carbide	NA	Available	Other

  From: 4,118,717 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Head Interchangeable Drill PXD Head PXD-NC

  OSG

  A head designed for processing non-ferrous metals. Ideal for machining aluminum alloy castings, etc.[Specifications]・ Shape: Insert (For drilling)・ Coating: WDI・ Work Material: Aluminum, copper

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  14 ～ 25.4	-	-	Aluminum[◎] / Copper[○]	-	-	-	Available	Other

  From: 1,658,031 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PXDZ Phoenix Head Interchangeable Drill PXD Head 3D Type

  OSG

  [Specifications]・ Shape: Holder・ Coating: WDI[Features]・ Machining with a large diameter can be done with the same efficiency as a solid carbide drill bit.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	63.4 ～ 112	-	-	-	-	Available	Other

  From: 7,367,685 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, GEN3 11 Series Tip

  NGK SPARK PLUG

  Inserts for GEN3 11 Series indexable drills that are sharp and can be used on machines with low horsepower and low rigidity, have excellent chip control, and do not require center hole drilling before drilling.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	Stainless Steel[○] / Titanium[○]	-	Carbide	-	Available	For General Steels (AlCrN, etc.)

  From: 2,323,318 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, GEN3 13 Series Tip

  NGK SPARK PLUG

  Inserts for GEN3 13 Series indexable drills that sharply cut, can be used on machines with low horsepower and low rigidity, have excellent chip control, and do not require center hole drilling before drilling.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	Stainless Steel[○] / Titanium[○]	-	Carbide	-	Available	For General Steels (AlCrN, etc.)

  From: 2,323,318 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, GEN3 18 Series Tip

  NGK SPARK PLUG

  Inserts for GEN3 18 Series Indexable Drills that offer excellent cutting sharpness, can be used on machines with low horsepower and low rigidity, have excellent chip control, and do not require center hole drilling before drilling.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	-	Carbide	-	Available	For General Steels (AlCrN, etc.)

  From: 3,167,955 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, GEN3 20 Series Tip

  NGK SPARK PLUG

  Inserts for GEN3 20 Series Indexable Drills that offer excellent cutting sharpness, can be used on machines with low horsepower and low rigidity, have excellent chip control, and do not require center hole drilling before drilling.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	-	Carbide	-	Available	For General Steels (AlCrN, etc.)

  From: 3,337,278 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, GEN3 22 Series Tip

  NGK SPARK PLUG

  Inserts for GEN3 22 Series Indexable Drills that offer excellent cutting sharpness, can be used on machines with low horsepower and low rigidity, have excellent chip control, and do not require center hole drilling before drilling.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	-	Carbide	-	Available	For General Steels (AlCrN, etc.)

  From: 3,496,645 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, GEN3 24 Series Tip

  NGK SPARK PLUG

  Inserts for GEN3 24 Series Indexable Drills that offer excellent cutting sharpness, can be used on machines with low horsepower and low rigidity, have excellent chip control, and do not require center hole drilling before drilling.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	-	Carbide	-	Available	For General Steels (AlCrN, etc.)

  From: 3,665,970 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, GEN3 26 Series Tip

  NGK SPARK PLUG

  Inserts for GEN3 26 Series Indexable Drills that offer excellent cutting sharpness, can be used on machines with low horsepower and low rigidity, have excellent chip control, and do not require center hole drilling before drilling.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	-	Carbide	-	Available	For General Steels (AlCrN, etc.)

  From: 3,715,771 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, GEN3 29 Series Tip

  NGK SPARK PLUG

  Inserts for GEN3 29 Series Indexable Drills that offer excellent cutting sharpness, can be used on machines with low horsepower and low rigidity, have excellent chip control, and do not require center hole drilling before drilling.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  29 ～ 31	-	-	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	-	Carbide	-	Available	For General Steels (AlCrN, etc.)

  From: 3,825,336 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, GEN3 32 Series Tip

  NGK SPARK PLUG

  Inserts for GEN3 32 Series Indexable Drills that offer excellent cutting sharpness, can be used on machines with low horsepower and low rigidity, have excellent chip control, and do not require center hole drilling before drilling.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  32 ～ 35	-	-	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	-	Carbide	-	Available	For General Steels (AlCrN, etc.)

  From: 4,084,303 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, Standard GEN2 0/0.5 Series Tip

  NGK SPARK PLUG

  [Features]Tool Material: Carbide, powder metal high-speed steelCoating / surface treatment: For TiCN, TiN, general steel (AlCrN, etc.)

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	-	Powder high-speed steel / Carbide	-	Available	For General Steels (AlCrN, etc.) / TiN

  From: 1,362,346 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, Standard GEN2 1/1.5 Series Tip

  NGK SPARK PLUG

  NGK SPARK PLUG Tip (For Drill) Throwaway Drill Standard / GEN2 1 / 1.5 Series Tip

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	-	Powder high-speed steel / Carbide	-	Available	For General Steels (AlCrN, etc.) / TiN

  From: 1,518,526 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, Standard GEN2 2/2.5 Series Tip

  NGK SPARK PLUG

  NGK SPARK PLUG Tip (For Drill) Throwaway Drill Standard / GEN2 2 / 2.5 Series Tip

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  26.5 ～ 35	-	-	general steel[○] / Cast Iron[○] / Titanium[○]	-	Powder high-speed steel / Carbide	-	Available	For General Steels (AlCrN, etc.)

  From: 2,386,268 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, Standard GEN2 3 Series Tip

  NGK SPARK PLUG

  NGK SPARK PLUG Tip (For Drill) Throwaway Drill Standard GEN2 Tip for 3 Series

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  35.5 ～ 47.5	-	-	general steel[○] / Cast Iron[○] / Titanium[○]	-	Powder high-speed steel	-	Available	For General Steels (AlCrN, etc.)

  From: 2,516,948 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, Standard GEN2 4 Series Tip

  NGK SPARK PLUG

  NGK SPARK PLUG Tip (For Drill) Throwaway Drill Standard GEN2 Tip for 4 Series

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  47 ～ 65	-	-	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	-	Powder high-speed steel	-	Available	For General Steels (AlCrN, etc.) / TiCN / TiN

  From: 2,630,096 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, Standard GEN2 5/6 Series Tip

  NGK SPARK PLUG

  NGK SPARK PLUG Tip (For Drill) Throwaway Drill Standard GEN2 Tip for 5/6 Series

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  64 ～ 88	-	-	general steel[○] / Cast Iron[○] / Titanium[○]	-	Powder high-speed steel	-	Available	For General Steels (AlCrN, etc.)

  From: 4,403,035 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, 90° Angled Tip 1 Series

  NGK SPARK PLUG

  90° tip angle insert for 1 Size Series Indexable Drills that can be used for center countersinking and chamfering, and forms an effective positive rake angle shape.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  19.05 ～ 22.23	-	-	general steel[○] / Aluminum[○]	-	Powder high-speed steel	-	Available	TiN

  From: 4,124,146 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, 90° Angled Tip 2 Series

  NGK SPARK PLUG

  90° tip angle insert for 2 Size Series Indexable Drills that can be used for center countersinking and chamfering, and forms an effective positive rake angle shape.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  31.75	-	-	general steel[○] / Aluminum[○]	-	Powder high-speed steel	-	Available	TiN

  From: 4,622,160 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, 90° Angled Tip 3 Series

  NGK SPARK PLUG

  90° tip angle insert for 3 Size Series Indexable Drills that can be used for center countersinking and chamfering, and forms an effective positive rake angle shape.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  38.1 ～ 47.63	-	-	general steel[○] / Aluminum[○]	-	Powder high-speed steel	-	Available	TiN

  From: 5,996,686 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, For Full Radius Machining SR Tip Y Series

  NGK SPARK PLUG

  SR insert for Y Series Indexable Drills that does not need step feed, shortens machining time, and allows full round chamfering at the bottom of the hole.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	general steel[○] / Cast Iron[○]	-	Powder high-speed steel	-	Available	TiCN

  From: 4,542,478 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, For Full Radius Machining SR Tip Z Series

  NGK SPARK PLUG

  SR insert for Z Series Indexable Drills that does not need step feed, shortens machining time, and allows full round chamfering at the bottom of the hole.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	general steel[○] / Cast Iron[○]	-	Powder high-speed steel	-	Available	TiCN

  From: 4,642,081 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, For Full Radius Machining SR Tip 0 Series

  NGK SPARK PLUG

  NGK SPARK PLUG Tip (For Drill) Throwaway Drill SR Tip 0 Series for Full R Machining

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	general steel[○] / Cast Iron[○]	-	Powder high-speed steel	-	Available	TiCN

  From: 5,857,238 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Drill, For Full Radius Machining SR Tip 1 Series

  NGK SPARK PLUG

  SR insert for 1 Series Indexable Drills that does not need step feed, shortens machining time, and allows full round chamfering at the bottom of the hole.

  Hole diameter (drill diameter) D(mm)	Overall Length L(mm)	Groove Length L(mm)	work material	Shank Type	Tool Material Type	With/without Oil Hole	Coating Y/N	Coating Type
  -	-	-	general steel[○] / Cast Iron[○]	-	Powder high-speed steel	-	Available	TiCN

  From: 6,893,113 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Hole diameter (drill diameter) D(mm)
Overall Length L(mm)
Groove Length L(mm)
work material
Shank Type
Tool Material Type
With/without Oil Hole
Coating Y/N
Coating Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	OSG	GUHRING	GUHRING	OSG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	DIJET	GUHRING	GUHRING	GUHRING	GUHRING	GUHRING	OSG	OSG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG
Product SeriesDòng sản phẩm	WDX Drill, for 2D Machining Depth	Magic Drill DRA Type Tip	SEC-Multi Drill Head SMDT-MTL	WDX Drill, for 5D Machining Depth	WDX Drill, for 4D Machining Depth	SEC-Multi Drill, SMDH-D, for 8D	SEC-Multi Drill, SMDH-L, for 5D	WDX Drill, for 3D Machining Depth	Phoenix Head Interchangeable Drill PXD Head PXD-KC	Tip for HT800WP Only 4111	Tip for HT800WP Only 4112	Phoenix Head Interchangeable Drill PXD Head PXD-PC	SEC-Multi Drill, SMDH-B3 (for bridge)	SEC-Multi Drill, SMDH-M, for 3D	SEC-Multi Drill, SMDT-MEL Type	TA-EZ Drill TEZD-MS Type	Tip for HT800WP Only 4113	Tip for HT800WP Only 4115	Tip for HT800WP Only 7632	Tip for HT800WP Only 7645	Tip for RT800WP Only 2485	Phoenix Head Interchangeable Drill PXD Head PXD-NC	PXDZ Phoenix Head Interchangeable Drill PXD Head 3D Type	Throw-Away Drill, GEN3 11 Series Tip	Throw-Away Drill, GEN3 13 Series Tip	Throw-Away Drill, GEN3 18 Series Tip	Throw-Away Drill, GEN3 20 Series Tip	Throw-Away Drill, GEN3 22 Series Tip	Throw-Away Drill, GEN3 24 Series Tip	Throw-Away Drill, GEN3 26 Series Tip	Throw-Away Drill, GEN3 29 Series Tip	Throw-Away Drill, GEN3 32 Series Tip	Throw-Away Drill, Standard GEN2 0/0.5 Series Tip	Throw-Away Drill, Standard GEN2 1/1.5 Series Tip	Throw-Away Drill, Standard GEN2 2/2.5 Series Tip	Throw-Away Drill, Standard GEN2 3 Series Tip	Throw-Away Drill, Standard GEN2 4 Series Tip	Throw-Away Drill, Standard GEN2 5/6 Series Tip	Throw-Away Drill, 90° Angled Tip 1 Series	Throw-Away Drill, 90° Angled Tip 2 Series	Throw-Away Drill, 90° Angled Tip 3 Series	Throw-Away Drill, For Full Radius Machining SR Tip Y Series	Throw-Away Drill, For Full Radius Machining SR Tip Z Series	Throw-Away Drill, For Full Radius Machining SR Tip 0 Series	Throw-Away Drill, For Full Radius Machining SR Tip 1 Series
From	8,293,697 VND	1,399,565 VND	2,058,015 VND	10,901,805 VND	10,032,305 VND	11,601,537 VND	9,069,559 VND	8,717,628 VND	1,744,090 VND	2,173,853 VND	2,300,946 VND	1,744,090 VND	10,233,352 VND	8,048,584 VND	2,223,753 VND	1,929,425 VND	2,402,541 VND	2,580,631 VND	1,045,946 VND	1,045,946 VND	4,118,717 VND	1,658,031 VND	7,367,685 VND	2,323,318 VND	2,323,318 VND	3,167,955 VND	3,337,278 VND	3,496,645 VND	3,665,970 VND	3,715,771 VND	3,825,336 VND	4,084,303 VND	1,362,346 VND	1,518,526 VND	2,386,268 VND	2,516,948 VND	2,630,096 VND	4,403,035 VND	4,124,146 VND	4,622,160 VND	5,996,686 VND	4,542,478 VND	4,642,081 VND	5,857,238 VND	6,893,113 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	26 Day(s) or more	26 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more
Hole diameter (drill diameter) D(mm)	13 ～ 68	7.94 ～ 25.5	17 ～ 23.5	13 ～ 36	13 ～ 63	13.5 or more and 14.5 or less ～ Over 41.0, and 42.5 or less	12.0 or more, less than 12.5 ～ Over 41.0, and 42.5 or less	13 ～ 143	14 ～ 25.4	-	-	14 ～ 25.4	24.5～24.7 ～ 26.5～26.7	12.5 or more, less than 13.0 ～ Over 39.5, and 41.0 or less	19.5 ～ 22	14 ～ 32	-	-	-	-	34 ～ 40.5	14 ～ 25.4	-	-	-	-	-	-	-	-	29 ～ 31	32 ～ 35	-	-	26.5 ～ 35	35.5 ～ 47.5	47 ～ 65	64 ～ 88	19.05 ～ 22.23	31.75	38.1 ～ 47.63	-	-	-	-
Overall Length L(mm)	88 ～ 246	-	-	127 ～ 278	114 ～ 362	191.5 ～ 460	130 ～ 335	101 ～ 314	-	-	-	-	170 ～ 175	105 ～ 230	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Groove Length L(mm)	29 ～ 144	-	-	68 ～ 184	55 ～ 260	124.5 ～ 360	69 ～ 235	42 ～ 212	-	-	-	-	87 ～ 92	44 ～ 135	-	-	-	-	-	-	-	-	63.4 ～ 112	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
work material	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	general steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎]	general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]	-	general steel[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○]	general steel[○]	general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	Cast Iron[○]	Stainless Steel[○]	-	-	-	Aluminum[◎] / Copper[○]	-	Stainless Steel[○] / Titanium[○]	Stainless Steel[○] / Titanium[○]	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Cast Iron[○] / Titanium[○]	general steel[○] / Cast Iron[○] / Titanium[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Cast Iron[○] / Titanium[○]	general steel[○] / Aluminum[○]	general steel[○] / Aluminum[○]	general steel[○] / Aluminum[○]	general steel[○] / Cast Iron[○]	general steel[○] / Cast Iron[○]	general steel[○] / Cast Iron[○]	general steel[○] / Cast Iron[○]
Shank Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tool Material Type	-	-	-	-	-	-	-	-	-	Carbide	Carbide	-	-	-	-	-	Carbide	Carbide	Carbide	Carbide	Carbide	-	-	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel / Carbide	Powder high-speed steel / Carbide	Powder high-speed steel / Carbide	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel
With/without Oil Hole	Available	-	Available	Available	Available	Available	Available	Available	-	NA	NA	-	Available	Available	Available	-	NA	NA	NA	NA	NA	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	TiAlN	-	For High Hardness (Silicon Group)	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	Other	Other	Other	Other	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Other	Other	Other	TiAlN	TiN	Other	Other	Other	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.) / TiN	For General Steels (AlCrN, etc.) / TiN	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.) / TiCN / TiN	For General Steels (AlCrN, etc.)	TiN	TiN	TiN	TiCN	TiCN	TiCN	TiCN

Loading...Tải…