(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
304 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
THE CUT
[Features]·High quality and low price.·Tool Material: High-speed steel·Machining applications: Hole drilling
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
7.5 ~ 50 | 158 ~ 390 | 78 ~ 245 | Stainless Steel[○] | Taper shank | High-speed steel | - | NA | - |
From: 620,593 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MARVEL
Excellent sharpness, amazing durability [Features] · The tip shape was designed with an emphasis of cutting ability and ensures good engagement with the workpiece as well as good centripetal performance. Allows for quick drilling work. [Applications] · For drilling holes in stainless steel and difficult-to-cut materials.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
- | - | - | Stainless Steel[○] | straight shank | Cobalt HSS | - | - | - |
From: 222,516 VND |
---|
Days to Ship: Số ngày giao hàng: 16 Day(s) |
You can add up to 6 items per a category to the compare list.
TS Coated Carbide Composite Spiral Drill, Stub Model
MISUMI
[Features]·Designed with helix angle of 30° near the tip and 20° near the shank·The 20° section has large core diameter for improved tool durability·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | 50 ~ 115 | 20 ~ 55 | Stainless Steel[○] | End Mill Shank | Carbide | NA | Available | - |
From: 1,754,093 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)
MISUMI
[Features]·By providing a margin with burnishing flute on the outer periphery, it is possible to perform hole drilling and hole finishing at the same time·Supports a wide range of work materials from general steel to stainless steel·Internal lubrication supply efficiently discharges cutting chip and improves tool lifespan (TAC-HBNESDR)·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 13 | 62 ~ 124 | 20 ~ 71 | Stainless Steel[○] | End Mill Shank | Carbide | Available / NA | Available | TiAlN |
From: 1,298,679 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
MISUMI
3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 ~ 13 | 46 ~ 124 | 12 ~ 77 | Stainless Steel[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 1,192,309 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Double Margin Drill, Regular
MISUMI
[Features]·By providing 4 margins on the outer periphery of the drill, the guide performance during chamfer and penetration is improved, enabling highly straight and stable drilling·Supports a wide range of work materials from general steel to stainless steel·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
1 ~ 11 | 45 ~ 118 | 12 ~ 71 | Stainless Steel[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 1,510,258 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub
MISUMI
[Features]·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge·Demonstrates high centripetal force by applying three rake and R-type thinning·Designed with larger core diameter than that of TAC-ESDBA to improve durability·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 13 | 66 ~ 107 | 20 ~ 60 | Stainless Steel[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 945,015 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular
MISUMI
By applying three rake + R thinning, it demonstrates a high level of afferent.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 13 | 66 ~ 124 | 28 ~ 77 | Stainless Steel[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 1,121,654 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular
MISUMI
[Features]·Capable of high feed and high speed cutting from general steel to stainless steel·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge·High-speed cutting is achieved by maintaining outstanding strength and stability by applying conical shape + R-type thinning·Suppresses chipping by applying chamfer edge treatment to the shoulder·By adopting diameter plus tolerance, it is effective for high-precision hole finishing closer to hole tolerance
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 13 | 66 ~ 124 | 28 ~ 77 | Stainless Steel[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 1,035,315 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
MISUMI
[Features]·Internal lubrication efficiently discharges cutting chip and improves tool lifespan·Capable of high feed and high speed cutting from general steel to stainless steel·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge·High-speed cutting is achieved by maintaining outstanding strength and stability by applying conical shape + R-type thinning·Suppresses chipping by applying chamfer edge treatment to the shoulder·By adopting diameter plus tolerance, it is effective for high-precision hole finishing closer to hole tolerance
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
4.2 ~ 7 | 66 ~ 91 | 24 ~ 53 | Stainless Steel[○] | End Mill Shank | Carbide | Available | Available | TiAlN |
From: 2,040,174 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model
MISUMI
[Features]·Capable of high feed and high speed cutting from general steel to stainless steel·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge·High-speed cutting is achieved by maintaining outstanding strength and stability by applying conical shape + R-type thinning·Suppresses chipping by applying chamfer edge treatment to the shoulder·By adopting diameter plus tolerance, it is effective for high-precision hole finishing closer to hole tolerance
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 13 | 46 ~ 137 | 16 ~ 78 | Stainless Steel[○] | straight shank | Carbide | NA | Available | TiAlN |
From: 798,225 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Drill, Regular Model with Oil Holes
MISUMI
[Features]·Internal lubrication efficiently discharges cutting chip and improves tool lifespan·Supports a wide range of work materials from general steel to stainless steel·Achieves outstanding strength by adopting straight cutting edge·Demonstrates high centripetal force by applying three rake and X-type thinning·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 13 | 66 ~ 124 | 28 ~ 77 | Stainless Steel[○] | End Mill Shank | Carbide | Available | Available | TiAlN |
From: 1,581,019 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular
MISUMI
[Features]·MISUMI original shape ideal for SUS430 machining.·Designed with helix angle of 38° near the tip and 20° near the shank·The 20° section has large core diameter for improved tool durability·Superfine cemented carbide alloy provides excellent abrasion resistance and enables high-speed machining·125° tip angle and combined helix angle improve cutting performance
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 10 | 60 ~ 120 | 28 ~ 61 | Stainless Steel[◎] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 2,296,299 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model
MISUMI
Sophisticated deep hole drilling that's made possible by well-balanced models that are aimed for the highest standards in high-speed steel
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2 ~ 13 | 56 ~ 161 | 24 ~ 101 | Stainless Steel[○] | End Mill Shank | Powder high-speed steel | Available / NA | Available | TiAlN |
From: 371,796 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
AG Starting Drill Long Shank AGSTDLS
NACHI(FUJIKOSHI)
Long shank type starting HSS drill for deep locations or avoiding interference.[Features]· Capable of speedy centering, chamfering and V-grooving and boasts a long service life.· Highly accurate positioning is possible with good bite.· The sharp blade produces a beautifully finished surface.[Applications]· Can be used with outstanding positioning accuracy for various processing, from chamfering to V groove machining.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | - | 9 ~ 30 | Stainless Steel[○] | - | Cobalt HSS | - | - | - |
From: 566,945 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Ultra Small Size UVM Drills (10D Type)_UVM-DRL-10D
OSG
Because it uses carbide materials, it has both high hardness and elastic modulus, making it possible to drill extremely small holes in general steel, heat-treated steel, and high hardness steel.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.02 ~ 0.08 | 38 | 0.22 ~ 0.88 | Stainless Steel[◎] | End Mill Shank | Carbide | NA | Available | Other |
From: 3,279,970 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Solid Carbide Ultra Small Size UVM Drills (Starting Drills)_UVM-LDS
OSG
Supports high-precision drilling in collaboration with UVM-DRL.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.05 | 38 | 0.075 | Stainless Steel[◎] | End Mill Shank | Carbide | NA | Available | Other |
From: 6,248,145 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
VP-GOLD Drills Short with Internal Coolant Supply_VP-HO-GDS
OSG
The powder metal high-speed steel with lubrication hole + V coating enables high-speed machining that exceeds that of a carbide drill.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
6 ~ 26 | 72 ~ 158 | 28 ~ 78 | Stainless Steel[◎] | End Mill Shank / straight shank | Powder high-speed steel | Available | Available | Other |
From: 2,826,270 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
UTDSX UT, Micro Coating Unimax Short Flute Drill Bit
UNION TOOL
[Features]· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials· The newly designed drill shape and X-thinning provide improved impact fracture resistance and reduced variation when drilling multiple holes· The tip angle is set to 130° to suppress the burr height in through holes· A high rigidity short blade is optimal for high precision machining and also for pilot hole processing
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 2 | 38 | 1.5 ~ 10 | Stainless Steel[○] | End Mill Shank | Carbide | NA | Available | TiCN |
From: 473,504 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
UTDLX UT, Micro Coating Unimax Long Blade Drill Bit
UNION TOOL
[Features]· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials· The newly designed drill shape and X-thinning provide improved impact fracture resistance (durability performance) and reduced variation when drilling multiple holes· The tip angle is set to 130° to suppress the burr height in through holes· Groove length 15 times larger than the diameter enables highly precise drilling of deep holes.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 3 | 38 ~ 80 | 4.5 ~ 45 | Stainless Steel[○] | End Mill Shank | Carbide | NA | Available | Other |
From: 848,058 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MSDH Drill for Small Diameter High-Hardness Processing
NS TOOL
[Features]・ Drilling of hardened steel 65 HRC is possible with a small diameter drill bit.・ Achieves stable lifespan with little variation in hole diameter.・ High hardness material drilling is possible from ø0.1.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.1 ~ 1 | 45 | 0.2 ~ 2 | Stainless Steel[◎] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 1,157,606 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
NSMD-M MUGEN Micro Coating Micro Drill
NS TOOL
[Features]・ A standard type with a groove length that is 10 times the cutting diameter.・ By adopting a thin film coating dedicated for micro drill bits, it demonstrates excellent performance for drilling holes in stainless steel, etc.・ Uses thinning on the tip to reduce cutting force. Stable drilling precision. (ø0.02 or more)
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.01 ~ 0.1 | 40 | 0.1 ~ 1 | Stainless Steel[◎] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 1,228,120 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MUGEN-COATING Point Drill (for Pilot Hole Machining) MDR-PD
NS TOOL
[Features]・ MUGEN miniature drill pilot hole drill. Can also be used for drilling thin plates.・ The use of thinning improves hole position precision and enables stable drilling.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.1 ~ 1 | 38 | 0.2 ~ 2 | Stainless Steel[◎] | End Mill Shank | Carbide | - | Available | TiAlN |
From: 1,174,022 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
PHP Carbide Drill, Phoenix Drill
OSG
An indexable drill with excellent cutting chip discharge and high machining efficiency. Cost-effective with 4-corner type insert.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
14 ~ 40 | 116 ~ 227 | 42 ~ 120 | Stainless Steel[◎] | End Mill Shank / straight shank | Carbide | NA | NA | Non-Coated |
From: 13,474,110 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
IWATA TOOL
[Features]· Taking on ultra-high speed machining.· 0.25 seconds per hole, lifetime of 20,000 or more holes.· Allows non-step boring up to 3D hole depth (up to 7D in some situations).· High precision and super long life.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 3 | 40 ~ 60 | 1.9 ~ 18.5 | Stainless Steel[○] | End Mill Shank | Carbide | NA | Available | TiAlN |
From: 692,649 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TFD Carbide TiCN Coated Drill Bit
IWATA TOOL
Highly circular, not requiring a reamer bit after drilling. Capable of high-efficiency and high-precision machining thanks to its high-rigidity groove shape and stub groove length. Ideal for drilling tap pilot holes.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.3 ~ 3 | 50 | 1.8 ~ 16.8 | Stainless Steel[○] | End Mill Shank | Carbide | NA | Available | TiCN |
From: 1,163,793 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SumiDrill WDX Type / PDL Type / PCT Type Insert WDXT-L
SUMITOMO ELECTRIC HARDMETAL
An insert for indexable drills.[Features]・ Stable drilling is possible by arranging so that the cutting force at the time of machining is balanced by the center blade and outer peripheral blade, and further optimizing the mutual positional relationship.・ Due to the effect of the "cutting chip groove" formed in the center of the chip breaker, the chip outflow direction can be controlled, and good cutting chip can be obtained.・ Optimum machining is realized under various work materials and conditions by using 3 types of chip breakers for different applications. Supports various machining such as hole expansion, counterbore machining, outer diameter turning and inner diameter boring.・ By adopting inserts for both center blade and outer peripheral blade, a total of 4 corners of 2 center blades and 2 outer peripheral blades can be used, demonstrating excellent cost-effectiveness.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
- | - | - | Stainless Steel[○] | - | - | - | - | - |
From: 181,890 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Multi Drill, SMDH-L, for 5D
SUMITOMO ELECTRIC HARDMETAL
A standard head replacement drill bit, a decisive factor for reducing drilling costs.[Features]・ A highly precise and high-strength head replacement drill bit with unique radial serration fastening.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
12.0 or more, less than 12.5 ~ Over 41.0, and 42.5 or less | 130 ~ 335 | 69 ~ 235 | Stainless Steel[○] | - | - | Available | Available | For High Hardness (Silicon Group) |
From: 9,069,559 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Multi Drill, SMDH-M, for 3D
SUMITOMO ELECTRIC HARDMETAL
A standard head replacement drill bit, a decisive factor for reducing drilling costs.[Features]・ A highly precise and high-strength head replacement drill bit with unique radial serration fastening.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
12.5 or more, less than 13.0 ~ Over 39.5, and 41.0 or less | 105 ~ 230 | 44 ~ 135 | Stainless Steel[○] | - | - | Available | Available | For High Hardness (Silicon Group) |
From: 8,048,584 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Multi Drill, SMDT-MEL Type
SUMITOMO ELECTRIC HARDMETAL
[Features]・ A highly precise and high-strength head replacement drill bit with radial serrations.・ Uses a special surface treatment that excels in abrasion resistance and rust prevention.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.・ The large thinning angle solves the defect of convex radius part peculiar to mild steel. With SUS material, welding defects at various parts are reduced.・ It improves the cutting performance of the outer periphery and prevents the occurrence of edge chipping at the cast iron hole exit.[Applications]・ Ideal for mild steel, gray cast iron, low rigidity equipment and difficult-to-cut materials such as stainless steel.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
19.5 ~ 22 | - | - | Stainless Steel[◎] | - | - | Available | Available | For High Hardness (Silicon Group) |
From: 2,223,753 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Features]・ A highly precise and high-strength head replacement drill bit with radial serrations.・ Uses a special surface treatment that excels in abrasion resistance and rust prevention.・ By replacing the head, you can always use it with a new cutting edge, contributing to productivity, cost reduction and tool management.・ The re-polishing allowance is secured at about 1.5 mm to 3 mm, which further reduces the tool cost.・ The large cutting edge treatment reduces damage to the cutting edge.・ With X-type thinning, stable drilling is achieved with excellent centripetal force when biting.[Applications]・ Ideal for high efficiency machining of general steel.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
17 ~ 23.5 | - | - | Stainless Steel[○] | - | - | Available | Available | For High Hardness (Silicon Group) |
From: 2,058,015 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Super Multi-Drill External Refueling, GS-Model 2D-Type
SUMITOMO ELECTRIC HARDMETAL
A solid carbide drill bit that uses a flute shape to enable excellent cutting chip disposal and discharge with a wide chip gullet.By applying DEX coat, stable long lifespan is realized in various work materials and wide cutting area.[Features]・ A long lifespan is achieved for various work materials by combining the new flute type and the dedicated coating "DEX Coat."・ Achieves stable drilling with little vibration even in small machines.・ Also supports MQL (Minimum Quantity Lubrication).
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2.2 ~ 12.6 | 45 ~ 100 | 10 ~ 49 | Stainless Steel[○] | End Mill Shank / straight shank | Carbide | NA | Available | For High Hardness (Silicon Group) |
From: 1,407,406 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Super Multi-Drill Internal Refueling, HGS-Model 8D-Type
SUMITOMO ELECTRIC HARDMETAL
A solid carbide drill bit that uses a new flute shape to enable excellent cutting chip discharge and ejection with a wide chip gullet.By applying DEX coat, stable long lifespan is realized in various work materials and wide cutting area.[Features]・ A long lifespan is achieved for various work materials by combining the new flute type and the dedicated coating "DEX Coat."・ Achieves stable drilling with little vibration even in small machines.・ Also supports MQL (Minimum Quantity Lubrication).
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
2.8 | 81 | 33 | Stainless Steel[◎] | End Mill Shank | Carbide | Available | Available | For High Hardness (Silicon Group) |
From: 3,446,085 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Super Multi-Drill Internal Refueling, HGS-Model 5D-Type
SUMITOMO ELECTRIC HARDMETAL
A solid carbide drill bit that uses a new flute shape to enable excellent cutting chip discharge and ejection with a wide chip gullet.By applying DEX coat, stable long lifespan is realized in various work materials and wide cutting area.[Features]・ A long lifespan is achieved for various work materials by combining the new flute type and the dedicated coating "DEX Coat."・ Achieves stable drilling with little vibration even in small machines.・ Also supports MQL (Minimum Quantity Lubrication).
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
7 | 109 | 56 | Stainless Steel[◎] | straight shank | Carbide | Available | Available | For High Hardness (Silicon Group) |
From: 3,466,800 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
HSS Multi Drill Regular Type HMD-M Model
SUMITOMO ELECTRIC HARDMETAL
Uses an end mill shank to improve tool precision and rigidity. Achieves high cutting chip.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3.4 ~ 10 | 71 ~ 137 | 39 ~ 87 | Stainless Steel[○] | End Mill Shank / straight shank | High-speed steel | NA | Available | TiAlN |
From: 369,045 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ATOM
The intermediate size of the drill diameter 0.01 mm increment size is standardized. High-spec and high-precision drill, keeping runout accuracy and lip height difference that affect hole accuracy within 2 microns.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.035 ~ 1.995 | 38 ~ 50 | 0.4 ~ 22 | Stainless Steel[○] | End Mill Shank | Carbide | NA | NA | Non-Coated |
From: 832,910 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Small Diameter Spiral Flute, 1 mm Shank
ATOM
A 1 mm shank drill for precision multiporous machining.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
0.05 ~ 0.99 | 30 | 0.5 ~ 9.5 | Stainless Steel[○] | End Mill Shank | Carbide | NA | NA | Non-Coated |
From: 415,670 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Stepped Drill (for Bolts with Hex Socket)
TRUSCO NAKAYAMA
[Features]· For hexagon socket head bolts.· For machining JIS B 1176 bolt holes or counterbores.[Applications]· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
- | 125 ~ 135 | 75 ~ 85 | Stainless Steel[○] | End Mill Shank | High-speed steel | - | - | - |
From: 2,453,880 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) |
You can add up to 6 items per a category to the compare list.
Stepped Drill (for Small Flat Head Screws)
TRUSCO NAKAYAMA
[Features]· For flat-head screws.· For machining JIS B 1101 bolt holes or counterbores.[Applications]· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
- | 65 ~ 90 | 25 ~ 45 | Stainless Steel[○] | End Mill Shank | High-speed steel | - | - | - |
From: 770,747 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
OK Coat Carbide NC Point Drill SNPDA
OKAZAKI SEIKO
A point drill bit optimal for chamfering or positioning when drilling.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | 50 ~ 110 | 8 ~ 30 | Stainless Steel[○] | straight shank | Carbide | NA | Available | TiAlN |
From: 776,255 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DIJET
It is a tool with excellent abrasion resistance.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
11.1 ~ 15.9 | 122 ~ 146 | 58 ~ 80 | Stainless Steel[◎] | End Mill Shank | Carbide | Available | Available | TiCN |
From: 6,433,806 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DIJET
It can handle a wide range of materials, from general steel to stainless steel and heat-resistant alloys, and has a structure that allows for smooth cutting chip discharge and easy regrinding.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
11.1 ~ 15.9 | 158 ~ 194 | 92 ~ 128 | Stainless Steel[◎] | End Mill Shank | Carbide | Available | Available | TiCN |
From: 7,354,138 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DIJET
It has both stable machinability and long tool life, enabling highly efficient machining. Because it is made of TiCN material, it has abrasion resistance, corrosion resistance, heat resistance, and low friction characteristics.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
16.5 ~ 20 | 167 ~ 179 | 112 ~ 114 | Stainless Steel[○] | straight shank | Carbide | NA | Available | TiCN |
From: 9,348,195 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DIJET
[Features]Tips for exchanging cuttings type drills with easy tip replacement and excellent cutting performance.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
14 ~ 32 | - | - | Stainless Steel[◎] | - | - | - | Available | Other |
From: 1,929,425 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DIJET
It is a tool with excellent abrasion resistance.
Hole diameter (drill diameter) D(mm) | Overall Length L(mm) | Groove Length L(mm) | work material | Shank Type | Tool Material Type | With/without Oil Hole | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
14 ~ 32 | 113 ~ 206 | 51 ~ 146 | Stainless Steel[◎] | End Mill Shank / straight shank | Carbide | Available | Available | - |
From: 7,230,428 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Hole diameter (drill diameter) D(mm) |
Overall Length L(mm) |
Groove Length L(mm) |
work material |
Shank Type |
Tool Material Type |
With/without Oil Hole |
Coating Y/N |
Coating Type |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | THE CUT | MARVEL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | OSG | IWATA TOOL | IWATA TOOL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | ATOM | ATOM | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | OKAZAKI SEIKO | DIJET | DIJET | DIJET | DIJET | DIJET |
Product SeriesDòng sản phẩm | TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes) | TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model | TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular | TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model | Solid Carbide Ultra Small Size UVM Drills (10D Type)_UVM-DRL-10D | Solid Carbide Ultra Small Size UVM Drills (Starting Drills)_UVM-LDS | ||||||||||||||||||||||||||||||||||||
From | 620,593 VND | 222,516 VND | 1,754,093 VND | 1,298,679 VND | 1,192,309 VND | 1,510,258 VND | 945,015 VND | 1,121,654 VND | 1,035,315 VND | 2,040,174 VND | 798,225 VND | 1,581,019 VND | 2,296,299 VND | 371,796 VND | 566,945 VND | 3,279,970 VND | 6,248,145 VND | 2,826,270 VND | 473,504 VND | 848,058 VND | 1,157,606 VND | 1,228,120 VND | 1,174,022 VND | 13,474,110 VND | 692,649 VND | 1,163,793 VND | 181,890 VND | 9,069,559 VND | 8,048,584 VND | 2,223,753 VND | 2,058,015 VND | 1,407,406 VND | 3,446,085 VND | 3,466,800 VND | 369,045 VND | 832,910 VND | 415,670 VND | 2,453,880 VND | 770,747 VND | 776,255 VND | 6,433,806 VND | 7,354,138 VND | 9,348,195 VND | 1,929,425 VND | 7,230,428 VND |
Days to ShipSố ngày giao hàng | 6 Day(s) or more | 16 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) | Same day or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more |
Hole diameter (drill diameter) D(mm) | 7.5 ~ 50 | - | 3 ~ 12 | 3 ~ 13 | 2 ~ 13 | 1 ~ 11 | 3 ~ 13 | 3 ~ 13 | 3 ~ 13 | 4.2 ~ 7 | 3 ~ 13 | 3 ~ 13 | 3 ~ 10 | 2 ~ 13 | 3 ~ 12 | 0.02 ~ 0.08 | 0.05 | 6 ~ 26 | 0.3 ~ 2 | 0.3 ~ 3 | 0.1 ~ 1 | 0.01 ~ 0.1 | 0.1 ~ 1 | 14 ~ 40 | 0.3 ~ 3 | 0.3 ~ 3 | - | 12.0 or more, less than 12.5 ~ Over 41.0, and 42.5 or less | 12.5 or more, less than 13.0 ~ Over 39.5, and 41.0 or less | 19.5 ~ 22 | 17 ~ 23.5 | 2.2 ~ 12.6 | 2.8 | 7 | 3.4 ~ 10 | 0.035 ~ 1.995 | 0.05 ~ 0.99 | - | - | 3 ~ 12 | 11.1 ~ 15.9 | 11.1 ~ 15.9 | 16.5 ~ 20 | 14 ~ 32 | 14 ~ 32 |
Overall Length L(mm) | 158 ~ 390 | - | 50 ~ 115 | 62 ~ 124 | 46 ~ 124 | 45 ~ 118 | 66 ~ 107 | 66 ~ 124 | 66 ~ 124 | 66 ~ 91 | 46 ~ 137 | 66 ~ 124 | 60 ~ 120 | 56 ~ 161 | - | 38 | 38 | 72 ~ 158 | 38 | 38 ~ 80 | 45 | 40 | 38 | 116 ~ 227 | 40 ~ 60 | 50 | - | 130 ~ 335 | 105 ~ 230 | - | - | 45 ~ 100 | 81 | 109 | 71 ~ 137 | 38 ~ 50 | 30 | 125 ~ 135 | 65 ~ 90 | 50 ~ 110 | 122 ~ 146 | 158 ~ 194 | 167 ~ 179 | - | 113 ~ 206 |
Groove Length L(mm) | 78 ~ 245 | - | 20 ~ 55 | 20 ~ 71 | 12 ~ 77 | 12 ~ 71 | 20 ~ 60 | 28 ~ 77 | 28 ~ 77 | 24 ~ 53 | 16 ~ 78 | 28 ~ 77 | 28 ~ 61 | 24 ~ 101 | 9 ~ 30 | 0.22 ~ 0.88 | 0.075 | 28 ~ 78 | 1.5 ~ 10 | 4.5 ~ 45 | 0.2 ~ 2 | 0.1 ~ 1 | 0.2 ~ 2 | 42 ~ 120 | 1.9 ~ 18.5 | 1.8 ~ 16.8 | - | 69 ~ 235 | 44 ~ 135 | - | - | 10 ~ 49 | 33 | 56 | 39 ~ 87 | 0.4 ~ 22 | 0.5 ~ 9.5 | 75 ~ 85 | 25 ~ 45 | 8 ~ 30 | 58 ~ 80 | 92 ~ 128 | 112 ~ 114 | - | 51 ~ 146 |
work material | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] |
Shank Type | Taper shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | - | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | - | - | - | - | - | End Mill Shank / straight shank | End Mill Shank | straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | straight shank | - | End Mill Shank / straight shank |
Tool Material Type | High-speed steel | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Cobalt HSS | Carbide | Carbide | Powder high-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | - | - | - | - | - | Carbide | Carbide | Carbide | High-speed steel | Carbide | Carbide | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Carbide | - | Carbide |
With/without Oil Hole | - | - | NA | Available / NA | NA | NA | NA | NA | NA | Available | NA | Available | NA | Available / NA | - | NA | NA | Available | NA | NA | NA | NA | - | NA | NA | NA | - | Available | Available | Available | Available | NA | Available | Available | NA | NA | NA | - | - | NA | Available | Available | NA | - | Available |
Coating Y/N | NA | - | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | - | Available | Available | Available | Available | Available | Available | Available | Available | NA | Available | Available | - | Available | Available | Available | Available | Available | Available | Available | Available | NA | NA | - | - | Available | Available | Available | Available | Available | Available |
Coating Type | - | - | - | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | - | Other | Other | Other | TiCN | Other | TiAlN | TiAlN | TiAlN | Non-Coated | TiAlN | TiCN | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | Non-Coated | Non-Coated | - | - | TiAlN | TiCN | TiCN | TiCN | Other | - |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy