Grooving / Cutting Off Holders

• You can add up to 6 items per a category to the compare list. Compare

  

  Chip for Grooving

  KYOCERA

  The edge width tolerance of GB32$050 is different. (0.50 + 0.05 0)

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 363,693 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip (For Small Diameters) TKF Type

  KYOCERA

  [Features]· Lead angle (front cutting blade angle: θ) indicates the angle when mounted to the holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 512,135 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)

  KYOCERA

  If using GMG/GMM type (2-cornered) inserts, set the maximum grooving depth to 15 mm.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,160,530 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting (Multi-Function) Bit GMM Model

  KYOCERA

  Machinable groove depth is limited depending on workpiece diameter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand / No-hand	-	-	-

  From: 279,130 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting Holder KGD Model (Combination)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,023,250 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder KGBA Type

  KYOCERA

  [Features]This is a lever lock type holder that can be used for shallow grooving on outer diameters.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 2,944,948 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip GDM Type

  KYOCERA

  When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand / No-hand	-	-	-

  From: 342,973 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Blade KGDF Type

  KYOCERA

  [Specifications]·Machining applications: flanges, blind holes; compatible insert shape: non-ISO standard; clamp method: non-ISO standard

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 2,546,748 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE Type Compatible Chip

  KYOCERA

  B dimension: Indicates machinable groove depth.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 432,221 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type

  KYOCERA

  A clamp-on type outer diameter shallow grooving holder.[Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 2,944,948 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)

  KYOCERA

  [Specifications]·Machining applications: grooving; holder angle (°): 90; lubrication hole (oil hole): yes; screw clamp enables good cutting chip discharge

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,566,470 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip GDMS Type

  KYOCERA

  When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 260,105 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Bit GDM Model

  KYOCERA

  Conventional insert mounting to new holders is not recommended.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 268,471 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)

  KYOCERA

  [Specifications]·Machining applications: grooving / parting-off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 2,403,956 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type

  SUMITOMO ELECTRIC HARDMETAL

  High-stiffness design suppresses vibrations during cutting. Ideal for grooving, deep grooving and parting-off.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2 ～ 6	20 ～ 25(23)	Right-hand / Left-hand	-	2 Corner	20 ～ 25

  From: 4,761,892 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA

  KYOCERA

  [Specifications]·Compatible insert shape: non-ISO standard; clamp method: clamp-on (C); clamp method: clamp-on (C)

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 5,803,958 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Cut-Off, CTP

  NGK SPARK PLUG

  A holder for parting-off machining with a maximum parting-off diameter of ø12 and tightening specifications for both front and back.Compatible insert: CTP-CX, CTP, CTP-X, CTPXWrench: CLR-15S

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Cutting off	-	-	Right-hand / Left-hand	-	-	-

  From: 2,971,226 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving (Cutting-Off) Chip GMM Type

  KYOCERA

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 332,616 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving Holder KGM Type (For Automatic Board)

  KYOCERA

  4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 2,965,665 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KGDF Type End Face Grooving GDFM/GDFMS Types

  KYOCERA

  Use a DM breaker for deep grooves when cutting chip processing is not stable during grooving with a general purpose GM breaker.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 209,660 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving (Cutting-Off) Chip GMG Type

  KYOCERA

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 446,563 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Shallow Groove Holder KIGBA Type

  KYOCERA

  [Specifications]·Machining applications: grooving; holder angle (°): 90; type: integrated

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 5,431,043 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutter Holder (Integrated Type) KTKH-S Type

  KYOCERA

  [Specifications]·Machining applications: parting-off; holder angle (°): 0; type: integrated type; compatible insert: TKN, TKN-P, TKR/L, TKR/L-P

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	-

  From: 3,442,355 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self Grip (T Cut) Blade for Plunging, Integrated Holder, for Automatic Lathe, General Purpose Type

  ISCAR

  [Applications]Used for parting and grooving steel materials.[Features]Automatic lathe type and general purpose type are available.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	3.1	-	Right-hand	52	1 Corner	25

  From: 4,638,130 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder KGBAS Type

  KYOCERA

  A lever-lock type outer diameter shallow grooving holder.[Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,193,558 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Bit GDG Model

  KYOCERA

  Conventional insert mounting to new holders is not recommended.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 367,431 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving Holder KGM Type

  KYOCERA

  4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,007,286 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore Slotting Holder [for GV Tip]

  KYOCERA

  Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 4,540,190 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip GMM Type

  KYOCERA

  A breaker developed for cutting off, where the sharpness of an automatic lathe or similar is required. Drastically reduces remaining center part.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 353,333 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punching Blade KTKB-S Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,131,591 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera, Grooving Holder, GFVT Type

  KYOCERA

  A clamp-on holder for face grooving.Modular (blade).

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	-	-	-	-

  From: 4,560,910 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting (Multi-Function) Bit GMN Model

  KYOCERA

  Machinable groove depth is limited depending on workpiece diameter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 239,388 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)

  KYOCERA

  T dimension: Shows the machinable groove depth.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 765,046 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)

  KYOCERA

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 417,416 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore End Surface Slotting, EZ Bar Conforming Tip

  KYOCERA

  T dimension: Shows the machinable groove depth.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 1,096,526 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore End Surface Slotting Series, Model VNFG (System Bar)

  KYOCERA

  The MIN dimension (0) for the end face groove outer diameter øD indicates the possible expansion to the center following machining of the initial groove in the range MIN-MAX.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 889,996 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning Bit Compatible Bit

  KYOCERA

  B dimension: Indicates machinable groove depth.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 572,858 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Compatible Chip for Grooved End Face Blade

  KYOCERA

  Kutoff blade for end face grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 403,075 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip GDG Type

  KYOCERA

  When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 431,575 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Plunging Blade

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2	15	No-hand	-	2 Corner	25.9

  From: 4,574,976 VND
  Days to Ship: Số ngày giao hàng: 27 Day(s) or more

  27 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 3 Plunging/Grooving Shank Bit

  SANDVIK

  3-corner specification, demonstrating high productivity in shallow parting-off and grooving, single holder supports all insert widths

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.5	6.4	Right-hand	-	3 Corner	32

  From: 6,158,076 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit For Profiling R/LX123...-070

  SANDVIK

  Versatile 1-corner and 2-corner shank tool bit for profiling

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Horizontal feeding / Profiling	6	25	No-hand	-	2 Corner	25 ～ 32

  From: 5,782,440 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutting Blade

  EXPOWER

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	-

  From: 1,331,869 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooving Holder, GFVS Type

  KYOCERA

  [Features]·A clamp-on type holder for face grooving·Modular type (Blade)

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	-	-	-	-

  From: 4,788,800 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Cut-Off, CTDP

  NGK SPARK PLUG

  [Features]· The use of internal lubrication suppress chip jamming.· Implement stable machining in combination with high rigidity CUT DUO.· Improvement in rigidity has exponentially increased the potential.· DELLA COAT (DM4) is now available

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Cutting off	2 ～ 2.5	-	Right-hand / Left-hand	-	2 Corner	-

  From: 3,948,535 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Application
Groove Width(mm)
Maximum Groove Depth(mm)
Selfishly
Maximum Machining Diameter(mm)
Number of corners for tip use
Shank height(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	NGK SPARK PLUG	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	ISCAR	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	EXPOWER	KYOCERA	NGK SPARK PLUG
Product SeriesDòng sản phẩm	Chip for Grooving	Slit Tip (For Small Diameters) TKF Type	Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)	Lathe Turning/Cutting (Multi-Function) Bit GMM Model	Lathe Turning/Cutting Holder KGD Model (Combination)	Outer Diameter Shallow Groove Holder KGBA Type	Slit Tip GDM Type	Grooved End Face Blade KGDF Type	Inner Diameter Groove SIGE Type Compatible Chip	Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type	Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)	Slit Tip GDMS Type	Lathe Turning (Cutter) Bit GDM Model	Lathe Turning/Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)	SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type	Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA	Holder For Cut-Off, CTP	Multi-Functional / Grooving (Cutting-Off) Chip GMM Type	Multi-Functional / Grooving Holder KGM Type (For Automatic Board)	KGDF Type End Face Grooving GDFM/GDFMS Types	Multi-Functional / Grooving (Cutting-Off) Chip GMG Type	Inner Diameter Shallow Groove Holder KIGBA Type	Cutter Holder (Integrated Type) KTKH-S Type	Self Grip (T Cut) Blade for Plunging, Integrated Holder, for Automatic Lathe, General Purpose Type	Outer Diameter Shallow Groove Holder KGBAS Type	Lathe Turning (Cutter) Bit GDG Model	Multi-Functional / Grooving Holder KGM Type	Small Bore Slotting Holder [for GV Tip]	Slit Tip GMM Type	Punching Blade KTKB-S Type	Kyocera, Grooving Holder, GFVT Type	Lathe Turning/Cutting (Multi-Function) Bit GMN Model	Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)	Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)	Small Bore End Surface Slotting, EZ Bar Conforming Tip	Small Bore End Surface Slotting Series, Model VNFG (System Bar)	Lathe Turning Bit Compatible Bit	Compatible Chip for Grooved End Face Blade	Slit Tip GDG Type	CoroCut 1/2 Plunging Blade	CoroCut 3 Plunging/Grooving Shank Bit	CoroCut 1/2 Shank Tool Bit For Profiling R/LX123...-070	Cutting Blade	Grooving Holder, GFVS Type	Holder For Cut-Off, CTDP
From	363,693 VND	512,135 VND	3,160,530 VND	279,130 VND	3,023,250 VND	2,944,948 VND	342,973 VND	2,546,748 VND	432,221 VND	2,944,948 VND	3,566,470 VND	260,105 VND	268,471 VND	2,403,956 VND	4,761,892 VND	5,803,958 VND	2,971,226 VND	332,616 VND	2,965,665 VND	209,660 VND	446,563 VND	5,431,043 VND	3,442,355 VND	4,638,130 VND	3,193,558 VND	367,431 VND	3,007,286 VND	4,540,190 VND	353,333 VND	3,131,591 VND	4,560,910 VND	239,388 VND	765,046 VND	417,416 VND	1,096,526 VND	889,996 VND	572,858 VND	403,075 VND	431,575 VND	4,574,976 VND	6,158,076 VND	5,782,440 VND	1,331,869 VND	4,788,800 VND	3,948,535 VND
Days to ShipSố ngày giao hàng	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	8 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	27 Day(s) or more	9 Day(s) or more	8 Day(s) or more	4 Day(s)	9 Day(s) or more	6 Day(s) or more
Application	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Outer Diameter Grooving / Cutting off	-	Cutting off	-	-	-	-	-	-	Outer Diameter Grooving / Cutting off	-	-	-	-	-	-	Edge surface grooving	-	-	-	-	-	-	-	-	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off / Horizontal feeding / Profiling	-	Edge surface grooving	Cutting off
Groove Width(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	2 ～ 6	-	-	-	-	-	-	-	-	3.1	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	2	1.5	6	-	-	2 ～ 2.5
Maximum Groove Depth(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	20 ～ 25(23)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	15	6.4	25	-	-	-
Selfishly	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand / Left-hand	-	Right-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	-	No-hand	Right-hand	No-hand	Right-hand	Right-hand	Right-hand / Left-hand	No-hand	No-hand	No-hand	Right-hand	No-hand	-	-	Right-hand / Left-hand
Maximum Machining Diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	52	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Number of corners for tip use	-	-	-	-	-	-	-	-	-	-	-	-	-	-	2 Corner	-	-	-	-	-	-	-	-	1 Corner	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	2 Corner	3 Corner	2 Corner	-	-	2 Corner
Shank height(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	20 ～ 25	-	-	-	-	-	-	-	-	25	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	25.9	32	25 ～ 32	-	-	-

Loading...Tải…