Holding Tools for I.D. Tuning（Selfishly：Right-hand Page4）

• You can add up to 6 items per a category to the compare list. Compare

  

  S...PWLN06 Type (Inner Diameter/Inner End Face Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	20 ～ 32	Internal Diameter	Right-hand	Lever lock	150 ～ 200	-	16 ～ 25	Up to 3	Available

  From: 4,478,038 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  A...PWLN06 Type Twin Hole Bar (Inner Diameter / Back End Surface Machining: with Cutting Fluid Hole)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	20 ～ 32	Internal Diameter	Right-hand	Lever lock	150 ～ 200	-	16 ～ 25	Up to 3	Available

  From: 5,265,301 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...PWLN08 Type (Inner Diameter/Inner End Face Machining)

  KYOCERA

  Lever lock type / wedge lock type boring bar.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	40	Internal Diameter	Right-hand	Lever lock	250	-	32	Up to 3	NA

  From: 7,212,743 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...CELN Type (Inner Diameter/Inner End Face Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: E (75° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	50	Internal Diameter	Right-hand	Clamp-on	300	-	40	Up to 3	NA

  From: 8,600,815 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...CTUN-A Type (Inner Diameter Machining)

  KYOCERA

  [Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	30	Internal Diameter	Right-hand	Clamp-on	220	-	25	-	-

  From: 6,280,460 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge for T-Max P Negative Tip

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	55 ～ 70	Internal Diameter	Right-hand	Lever lock	66 ～ 73.7	-	-	-	NA

  From: 5,573,567 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max U Fine Boring Unit

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	Right-hand	-	24.1 ～ 33.8	-	16 ～ 20	-	NA

  From: 15,980,758 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut MB Adapter for Small Lathe

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	Right-hand	-	-	-	-	-	-

  From: 4,856,063 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN 107 Carbide Boring Bit for Positive Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20	Internal Diameter	Right-hand	Screw-on	200	7°	16	64	Available

  From: 4,380,354 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN RC, Boring Bit for Negative Tips

  SANDVIK

  T-Max P series turning boring bars for outer diameter turning of large to medium size parts with high productivity

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	32	Internal Diameter	Right-hand	Cable clamp	300	0°	25	37.5 ~ 100	Available

  From: 11,190,428 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutting Head for CORO-TURN SL CORO-TURN 107

  SANDVIK

  For inner and outer diameter turning of slender partsHigh repeatability insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	20	Internal Diameter	Right-hand	Screw-on	-	-	16	20	Available

  From: 8,650,546 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	25 ～ 50	Internal Diameter	Right-hand	-	32 ～ 55	-	-	-	NA

  From: 5,573,567 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SCLCR/L-R

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	10	Internal Diameter	Right-hand	Screw-on	125	7°	8	48	Available

  From: 8,293,572 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-R

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	15	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	125	7°	10	15 ~ 40	Available

  From: 4,987,658 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SDUCR/L-R

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	15 ～ 22	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	150 ～ 200	7°	10 ～ 16	60 ～ 96	Available

  From: 10,452,323 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR/L-R

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	16 ～ 20	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	150 ～ 200	7°	12 ～ 16	18 ~ 48 ～ 24 ~ 64	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	16	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	150	7°	12	30 ~ 80	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	16	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	150	7°	12	18 ~ 48	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L-R

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	20	Internal Diameter	Right-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	40	Internal Diameter	Right-hand	Screw-on	300	7°	32	128	Available

  From: 8,543,862 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Integrated) CoroTurn 107, Boring Tool Bit for Turning (Part Number List)

  SANDVIK

  [Features]Inner diameter boring tool bit with low cutting force. The internal coolant ensures longer insert lifespan and good cutting chip handling. High tool rigidity ensures stable machining operations even with workpieces with long protrusions. For inner diameter turning operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	11	Internal Diameter	Right-hand	Screw-on	125	7°	10	15 ~ 40	NA

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn 107, Boring Tool Bit for Turning

  SANDVIK

  [Features]·Inner diameter boring tool bit with low cutting force·The internal coolant ensures longer insert lifespan and good cutting chip handling·High tool rigidity ensures stable machining operations even with workpieces with long protrusions[Applications]·For inner diameter turning operations

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	22 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	200 ～ 300	5°	16 ～ 40	24 ~ 64 ～ 160	Available

  From: 4,958,690 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR/L-E

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	22	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...SVUCR/L-E

  SANDVIK

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	22	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: 4,986,360 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L-ER

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	18 ～ 20	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	150 ～ 200	11°	12 ～ 16	18 ~ 48 ～ 24 ~ 64	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SDUPR/L-ER

  SANDVIK

  CoroTurn 111, a true solution for eliminating vibrations in long overhangs and unstable machining conditionsCarbide boring bit for turning

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	15 ～ 18	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	150 ～ 180	11°	10 ～ 12	60 ～ 72	Available

  From: 10,445,307 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR/L-ER

  SANDVIK

  [Features]A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit. The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations with longer protrusions. For suppressing chattering.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	15	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	150	11°	10	60 ~ 100	NA

  From: 19,634,258 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR/L-ER

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	-	-	Right-hand	-	-	11°	16	-	-

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	15 ～ 25	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	125 ～ 250	11°	10 ～ 20	15 ~ 40 ～ 30 ~ 80	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR/L-R

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8.5	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	80	11°	6	9 ~ 24	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR/L-R

  SANDVIK

  [Features]A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit. The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter. For inner-diameter turning (bore cutting) operations with longer protrusions. For suppressing chattering.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	16	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	180	11°	12	72 ~ 120	NA

  From: 23,081,540 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111 Screw Clamp, A/E-SWLPR/LR

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	7 ～ 16	Internal Diameter	Right-hand	Screw-on	80 ～ 180	11°	5 ～ 12	9 ~ 24 ～ 72	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...SWLPR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	10 ～ 12	Internal Diameter	Right-hand	Screw-on	100 ～ 125	11°	8 ～ 10	12 ~ 32 ～ 15 ~ 40	Available

  From: 4,893,027 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Bit CoroTurn RC Double Clamp A-DWLNR/L

  SANDVIK

  [Features]A highly-rigid double clamp boring bit for inner diameter lathe turningSupports the use of internal coolantHigh tool rigiditySupports inner-diameter turning (bore cutting) and the use of negative insertsSupports everything from roughing through to finishing

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	40 ～ 50	Internal Diameter	Right-hand	Cable clamp	300	0°	32 ～ 40	48 ~ 128 ～ 60 ~ 160	Available

  From: 11,296,260 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp, Diamond Shaped 55°

  SANDVIK

  [Features]An interchangeable-head-type cutting head for inner-diameter turning. The low cutting resistance ensures stable machining operations. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	50	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	-	-	40	-	Available

  From: 11,610,588 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DSKNR/L

  SANDVIK

  [Features]An interchangeable-head-type cutting head for inner diameter cutting. Being a double clamp gives it excellent insert-clamping rigidity. The heads can be quickly changed out, helping reduce down time. Inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	55	Internal Diameter	Right-hand	Cable clamp	-	-	40	36	Available

  From: 10,596,682 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge, CoroTurn 107 Screw Clamp, SRSCR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  R (Circular)	20 ～ 40	Internal Diameter	Right-hand	-	25 ～ 50	-	-	-	NA

  From: 5,573,567 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge, CoroTurn 107 Screw Clamp, SSKCR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	40 ～ 55	Internal Diameter	Right-hand	-	52.2 ～ 66.1	-	-	-	NA

  From: 5,573,567 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge, CoroTurn 107 Screw Clamp, SSSCR/L

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	40 ～ 50	Internal Diameter	Right-hand	-	50.1 ～ 55.3	-	-	-	NA

  From: 6,150,506 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit T-Max P Lever Clamp S...-PDUNR/L

  SANDVIK

  [Features]An easy-handling inner-diameter boring tool bit with excellent repeatability. The use of internal coolant improves the handling of cutting chips and gives the inserts a longer service life. Supports inner-diameter turning (bore cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	32 ～ 63	Internal Diameter / Inner diameter profiling	Right-hand	Lever lock	300 ～ 400	0°	25 ～ 50	100 ～ 200	Available

  From: 9,482,450 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit T-Max P Lever Clamp S...PTFNR/L

  SANDVIK

  T-Max P Turning Boring Bar for High Productivity, High Efficiency, and High Quality Machining

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20 ～ 32	Internal Diameter	Right-hand	Lever lock	200 ～ 300	-	16 ～ 25	64 ～ 100	Available

  From: 8,105,854 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit T-Max P Lever Clamp A...-MWLNR/L

  SANDVIK

  [Features]An easy-handling inner-diameter boring tool bit with excellent repeatability. Supports inner-diameter turning (bore cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	40	Internal Diameter	Right-hand	Double Clamp	350	0°	32	48 ~ 128	Available

  From: 11,065,302 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR/L

  SANDVIK

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	13 ～ 20	Internal Diameter	Right-hand	Screw-on	150 ～ 200	7°	10 ～ 16	40 ～ 48	Available

  From: 10,452,323 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR/L

  SANDVIK

  [Features]A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit. The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter. For inner-diameter turning (bore cutting) operations with longer protrusions. For suppressing chattering.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	13 ～ 16	Internal Diameter	Right-hand	Screw-on	-	7°	10 ～ 12	60～100 ～ 72～120	-

  From: 19,634,258 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL Shank Adapter 570-NG

  SANDVIK

  [Features]An interchangeable-head-type turning bit. Has fewer tool points making inventory management easy and allowing the selection of multiple types of cutting unit. For outer diameter turning of all types of work material.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	Right-hand	-	111	-	25	-	Available

  From: 5,831,615 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Minimum Processing Diameter φA
Application
Selfishly
Clamp Shape
Overall Length L1
Clearance angle
Shank Diameter φD
Protrusion length (L/D)
Lubrication Hole Y/N

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	S...PWLN06 Type (Inner Diameter/Inner End Face Machining)	A...PWLN06 Type Twin Hole Bar (Inner Diameter / Back End Surface Machining: with Cutting Fluid Hole)	S...PWLN08 Type (Inner Diameter/Inner End Face Machining)	S...CELN Type (Inner Diameter/Inner End Face Machining)	S...CTUN-A Type (Inner Diameter Machining)	Cartridge for T-Max P Negative Tip	T-Max U Fine Boring Unit	CoroCut MB Adapter for Small Lathe	CORO-TURN 107 Carbide Boring Bit for Positive Tips	CORO-TURN RC, Boring Bit for Negative Tips	Cutting Head for CORO-TURN SL CORO-TURN 107	Cartridge	Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SCLCR/L-R	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-R	Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SDUCR/L-R	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR/L-R	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L-R	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L	(Integrated) CoroTurn 107, Boring Tool Bit for Turning (Part Number List)	CoroTurn 107, Boring Tool Bit for Turning	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR/L-E	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...SVUCR/L-E	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L-ER	Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SDUPR/L-ER	Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR/L-ER	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR/L-ER	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR/L-R	Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR/L-R	Boring Tool Bit, CoroTurn 111 Screw Clamp, A/E-SWLPR/LR	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...SWLPR/L	Boring Bit CoroTurn RC Double Clamp A-DWLNR/L	CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp, Diamond Shaped 55°	CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DSKNR/L	Cartridge, CoroTurn 107 Screw Clamp, SRSCR/L	Cartridge, CoroTurn 107 Screw Clamp, SSKCR/L	Cartridge, CoroTurn 107 Screw Clamp, SSSCR/L	Boring Tool Bit T-Max P Lever Clamp S...-PDUNR/L	Boring Tool Bit T-Max P Lever Clamp S...PTFNR/L	Boring Tool Bit T-Max P Lever Clamp A...-MWLNR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR/L	CoroTurn SL Shank Adapter 570-NG
From	4,478,038 VND	5,265,301 VND	7,212,743 VND	8,600,815 VND	6,280,460 VND	5,573,567 VND	15,980,758 VND	4,856,063 VND	4,380,354 VND	11,190,428 VND	8,650,546 VND	5,573,567 VND	8,293,572 VND	4,987,658 VND	10,452,323 VND	4,893,027 VND	4,893,027 VND	4,893,027 VND	4,893,027 VND	8,543,862 VND	4,893,027 VND	4,958,690 VND	4,893,027 VND	4,986,360 VND	4,893,027 VND	10,445,307 VND	19,634,258 VND	4,893,027 VND	4,893,027 VND	4,893,027 VND	23,081,540 VND	4,893,027 VND	4,893,027 VND	11,296,260 VND	11,610,588 VND	10,596,682 VND	5,573,567 VND	5,573,567 VND	6,150,506 VND	9,482,450 VND	8,105,854 VND	11,065,302 VND	10,452,323 VND	19,634,258 VND	5,831,615 VND
Days to ShipSố ngày giao hàng	8 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s)	9 Day(s) or more	9 Day(s)	9 Day(s)	7 Day(s) or more	9 Day(s)	12 Day(s)	9 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	7 Day(s) or more	9 Day(s)	9 Day(s) or more	9 Day(s)	12 Day(s)	9 Day(s)	7 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	7 Day(s) or more	9 Day(s)	12 Day(s)	9 Day(s)	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s)	9 Day(s) or more	9 Day(s)	9 Day(s)
Applicable Tip Shape	W (Hexagonal Type)	W (Hexagonal Type)	W (Hexagonal Type)	C (80° Diamond-Shape)	T (Triangle)	S (Rectangular)	-	-	T (Triangle)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	S (Rectangular)	T (Triangle)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	T (Triangle)	T (Triangle)	W (Hexagonal Type)	W (Hexagonal Type)	W (Hexagonal Type)	D (55° Diamond-Shape)	S (Rectangular)	R (Circular)	S (Rectangular)	S (Rectangular)	D (55° Diamond-Shape)	T (Triangle)	W (Hexagonal Type)	T (Triangle)	T (Triangle)	-
Minimum Processing Diameter φA	20 ～ 32	20 ～ 32	40	50	30	55 ～ 70	-	-	20	32	20	25 ～ 50	10	15	15 ～ 22	16 ～ 20	16	16	20	40	11	22 ～ 50	22	22	18 ～ 20	15 ～ 18	15	-	15 ～ 25	8.5	16	7 ～ 16	10 ～ 12	40 ～ 50	50	55	20 ～ 40	40 ～ 55	40 ～ 50	32 ～ 63	20 ～ 32	40	13 ～ 20	13 ～ 16	-
Application	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	-	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter
Selfishly	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand	Right-hand
Clamp Shape	Lever lock	Lever lock	Lever lock	Clamp-on	Clamp-on	Lever lock	-	-	Screw-on	Cable clamp	Screw-on	-	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	-	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Cable clamp	Screw-on	Cable clamp	-	-	-	Lever lock	Lever lock	Double Clamp	Screw-on	Screw-on	-
Overall Length L1	150 ～ 200	150 ～ 200	250	300	220	66 ～ 73.7	24.1 ～ 33.8	-	200	300	-	32 ～ 55	125	125	150 ～ 200	150 ～ 200	150	150	200	300	125	200 ～ 300	200	200	150 ～ 200	150 ～ 180	150	-	125 ～ 250	80	180	80 ～ 180	100 ～ 125	300	-	-	25 ～ 50	52.2 ～ 66.1	50.1 ～ 55.3	300 ～ 400	200 ～ 300	350	150 ～ 200	-	111
Clearance angle	-	-	-	-	-	-	-	-	7°	0°	-	-	7°	7°	7°	7°	7°	7°	7°	7°	7°	5°	7°	7°	11°	11°	11°	11°	11°	11°	11°	11°	11°	0°	-	-	-	-	-	0°	-	0°	7°	7°	-
Shank Diameter φD	16 ～ 25	16 ～ 25	32	40	25	-	16 ～ 20	-	16	25	16	-	8	10	10 ～ 16	12 ～ 16	12	12	16	32	10	16 ～ 40	16	16	12 ～ 16	10 ～ 12	10	16	10 ～ 20	6	12	5 ～ 12	8 ～ 10	32 ～ 40	40	40	-	-	-	25 ～ 50	16 ～ 25	32	10 ～ 16	10 ～ 12	25
Protrusion length (L/D)	Up to 3	Up to 3	Up to 3	Up to 3	-	-	-	-	64	37.5 ~ 100	20	-	48	15 ~ 40	60 ～ 96	18 ~ 48 ～ 24 ~ 64	30 ~ 80	18 ~ 48	24 ~ 64	128	15 ~ 40	24 ~ 64 ～ 160	24 ~ 64	24 ~ 64	18 ~ 48 ～ 24 ~ 64	60 ～ 72	60 ~ 100	-	15 ~ 40 ～ 30 ~ 80	9 ~ 24	72 ~ 120	9 ~ 24 ～ 72	12 ~ 32 ～ 15 ~ 40	48 ~ 128 ～ 60 ~ 160	-	36	-	-	-	100 ～ 200	64 ～ 100	48 ~ 128	40 ～ 48	60～100 ～ 72～120	-
Lubrication Hole Y/N	Available	Available	NA	NA	-	NA	NA	-	Available	Available	Available	NA	Available	Available	Available	Available	Available	Available	Available	Available	NA	Available	Available	Available	Available	Available	NA	-	Available	Available	NA	Available	Available	Available	Available	Available	NA	NA	NA	Available	Available	Available	Available	-	Available

Loading...Tải…