Cutters / Indexable End Mills（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type

  OSG

  The employment of this high-precision insert achieves excellent bottom surface roughness. Due to the effect of the bottom notch, cutting chips are split into 2 during ramping and helical milling, which suppresses chip biting and entanglement, enabling smooth milling.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	16 ～ 63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	90 ～ 190	2 ～ 6	With handle	16 ～ 32	25 ～ 90	-	Carbide Coat / No Carbide Coat

  From: 6,288,141 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type

  OSG

  Indexable high-feed radius cutter, threaded type. Dedicated holders support various machining depths.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	13.2 ～ 46.4	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	140 ～ 300	2 ～ 5	With handle	25 ～ 42	40 ～ 180	-	Carbide Coat

  From: 5,718,638 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aero Mill (Negative Type)

  FUJIGEN

  Small diameter shank lineup allows use for small machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	30 ～ 40	general steel / Stainless Steel / Aluminum / Resin	Finishing	85	3	With handle	-	-	-	Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD)

  From: 5,983,619 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aero Mill (Positive Type)

  FUJIGEN

  [Features]· Ideal for use in low-rigidity machines such as tapping centers.· It supports a variety of workpieces with the lineup of negative and positive types.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	30 ～ 40	Stainless Steel / Aluminum / Resin	Finishing	85	3	With handle	-	-	-	Carbide Coat / No Carbide Coat

  From: 5,983,619 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Tool

  FUJIGEN

  [Features]Various corner radius machining is possible by exchanging inserts.[Applications]For finishing flat surfaces and sides.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	30 ～ 80	general steel / Stainless Steel / Aluminum / Resin	Finishing	105 ～ 200	2 ～ 4	With handle	-	-	-	No Carbide Coat

  From: 5,152,282 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Ace Mill, DPGF4000 Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·An ace mill for general cutting (slab milling / grooving / chamfering) of steel, cast iron, and stainless steel.Maximum cutting depth (Ad) (mm): 9.5cutting diameter D (⌀): 6, 8, 10, 12

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	80 ～ 157	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	Rough and medium rough processing	-	6 ～ 12	Arbor	-	-	9.5	-

  From: 15,502,092 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  RF4000 Type High-Speed Cutter for Aluminum

  SUMITOMO ELECTRIC HARDMETAL

  A high-performance lightweight cutter capable of roughing to finish machining of non-ferrous metals including aluminum alloys.[Features]・ From roughing to finishing: Cost effective rough machining with carbide inserts / high-precision finish machining with SUMIDIA.・ Robust lightweight body: Special aluminum alloy increases strength / weight reduction to approx. 40% of steel body / rigid-anodized surface / improved efficiency in higher rotational speeds, lower spindle loads and shorter tool change time.・ Safe design: It prevents scattering of parts and inserts due to centrifugal force / It is designed to prevent deformation without the use of wedge structure.・ Easy blade runout adjustment: External setting structure enables easy presetting / high-precision design secures blade runout within 10 μm simply by mounting the unit.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	80 ～ 200	Aluminum	Rough and medium rough processing	-	6 ～ 12	Arbor	-	-	3 (When using Sumidia Indexable Inserts), 10 (When using super hard tip)	-

  From: 33,308,755 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi Power Mill, PWC Model PWCF-R

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·A multi-flute type Sumi power mill with a high efficiency semi-shoulder for slab milling, side milling, grooving, chamfering, etc., of cast iron.Maximum cutting depth (Ad) (mm): 15

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Chamfer	80 ～ 200	Cast Iron	Rough and medium rough processing	-	9 ～ 24	Arbor	-	-	15	-

  From: 21,980,068 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WEX Model WEX-E

  SUMITOMO ELECTRIC HARDMETAL

  Low resistance insert with reinforced cutting edge, high-precision cutting edge, high durability body, a wide range of insert variations, and all part numbers equipped with air holes.[Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	25 ～ 63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	120 ～ 220	2 ～ 6	With handle	20 ～ 42	25 ～ 80	14	-

  From: 5,340,149 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WFX Model WFXF-E

  SUMITOMO ELECTRIC HARDMETAL

  Screw-fastened cutter enabling 4-corner use. With an ideal cutting edge shape, good wall surface accuracy can be gained.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 80	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	Rough and medium rough processing	120	4 ～ 6	With handle	32	30	10	-

  From: 10,619,906 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WFX-R For SEC-Wave Mill WFX Model

  SUMITOMO ELECTRIC HARDMETAL

  Screw locked cutter, enabling using 4 corners. Ideal blade shape provides favorable wall precision.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 250	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	Rough and medium rough processing	-	3 ～ 12	Arbor	-	-	10	-

  From: 7,439,344 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Metal Slash Mill, MSX Model MSX-E

  SUMITOMO ELECTRIC HARDMETAL

  A multi-functional cutter that enables roughing at ultra-high feeds and dramatically improves efficiency with various tool holders.[Features]・ Special surface treatment improves scratch resistance.・ Ramping, helical, and drilling are possible.・ Strong clamping enables stable cutting.・ Improved cutting chip discharge performance with air hole, coolant and special pocket shape.・ Equipped with an original special shape insert that combines cutting performance and cutting edge strength.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	32 ～ 63	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	Rough and medium rough processing	150 ～ 250	2 ～ 4	With handle	32 ～ 42	50 ～ 120	1 ～ 2.5	-

  From: 7,778,488 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Radius Mill, WRCX Model WRCXF-RS

  SUMITOMO ELECTRIC HARDMETAL

  This multi-functional cutter performs a variety of machining with high efficiency, such as mold engraving, slope milling, and helical tapping.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	50 ～ 100	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	-	4 ～ 6	Arbor	-	-	6 ～ 8	-

  From: 10,619,906 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Repeater for WRX Type, WRX-R (S)

  SUMITOMO ELECTRIC HARDMETAL

  Optimizes cutting edge placement to realize low resistance and low vibration machining. Smooth chip discharge and high body rigidity are made possible by the lead and special pocket shape.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 100	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	-	8 ～ 24	Arbor	-	-	27 ～ 53	-

  From: 15,921,105 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Metal Slash Mill (modular type), MSX Model MSX-M-Z

  SUMITOMO ELECTRIC HARDMETAL

  Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	32 ～ 40	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	Rough and medium rough processing	63	2 ～ 3	With handle	17	40	1 ～ 2	-

  From: 7,778,488 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius less than 3.2

  SUMITOMO ELECTRIC HARDMETAL

  High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 125	Aluminum	Rough and medium rough processing	-	4 ～ 7	Arbor	-	-	16 ～ 18	-

  From: 15,539,469 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill (FCR type Long)

  BIG DAISHOWA SEIKI

  [Features]· Dual face contact integrated type provides even higher rigidity. Tip with enhanced rigidity, allowing tough and stable ramping

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove / Plunging (Z feed)	16 ～ 32	-	-	-	2	With handle	-	45 ～ 90	-	-

  From: 6,849,906 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill (FCR type Standard)

  BIG DAISHOWA SEIKI

  [Features]· Dual face contact integrated type provides even higher rigidity. Tip with enhanced rigidity, allowing tough and stable ramping

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Plunging (Z feed)	16 ～ 32	-	-	-	2 ～ 3	With handle	-	25 ～ 50	-	-

  From: 6,601,296 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill FCM Type Straight Shank Type

  BIG DAISHOWA SEIKI

  [Features]· A highly versatile straight shank type. Combination with the MEGA Double Power Chuck enables comfortable work.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	12 ～ 50	-	-	90 ～ 180	1 ～ 5	With handle	16 ～ 32	15 ～ 48	-	-

  From: 4,494,058 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill FCR Type Straight Shank Type

  BIG DAISHOWA SEIKI

  [Features]· A highly versatile straight shank type. Combination with the MEGA Double Power Chuck enables comfortable work.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Plunging (Z feed)	17 ～ 33	-	-	120 ～ 180	2 ～ 3	With handle	16 ～ 32	25 ～ 48	-	-

  From: 6,088,274 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shell End Mill for MCS, MC G2

  ASAHI TOOLS

  Used by attaching an EM body (blade part) with a large diameter of φ50-100 onto the arbor

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 100	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper / Resin	-	60 ～ 110	6 ～ 10	Arbor	-	-	-	-

  From: 12,957,455 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mirror Bore BNM Shape

  DIJET

  [Features]· For high precision machining

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	8 ～ 30	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	83 ～ 240	-	With handle	12 ～ 32	18.5 ～ 49	-	-

  From: 4,040,210 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFWN90 Type Face Mill Holder

  KYOCERA

  MFWN90 type face mill[Features]·Good sharpness with low resistance·Resistant to chatter·Thick wall design with excellent chipping resistance, neutral insert·Long life with new technology MEGACOAT NANO·A lineup of 5 chipbreakers for different machining applications

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	-	-	-	-	3 ～ 18	-	-	-	-	-

  From: 10,839,052 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Half Side Slot Mill with Hub Left Hand

  KYOCERA

  [Features]·This product is capable of shoulder milling and backside machining.·A groove width adjustable screw clamp system (horizontal).Number of edges (Pcs.): 6Weight (g): 1000

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	6 ～ 10	-	-	-	-	-

  From: 45,135,339 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 328 Cutter

  SANDVIK

  General-purpose cutter for a variety of grooving, threading, and chamfering

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove / Chamfer	39 ～ 44	general steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Finishing	125	2 ～ 3	With handle	25	23	3 ～ 4	Carbide Coat

  From: 13,038,061 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 365 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	69.7mm ～ 166.7mm	general steel / Quenched and tempered steel / high hardness steel / Cast Iron	Rough and medium rough processing	-	6 ～ 18	Arbor	22 ～ 50.8	-	6	Carbide Coat

  From: 19,078,384 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill R216 Ball End Mill

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	50mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Finishing	171	2	With handle	40	-	44.6	Carbide Coat

  From: 26,937,581 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Side Cutter, Milling Cutter, Front Face Milling Cutter

  SANDVIK

  A versatile high-feed milling[Features]It is a tool with a concept of highly productive roughing to be used when a high cutting chip discharge rate is a top priorityThe 10° entering angle achieves face milling at a very high feed rate

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	52mm	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium	Rough and medium rough processing	-	3	Arbor	-	-	2	Carbide Coat

  From: 21,477,646 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill S-60 Face Milling Cutter

  SANDVIK

  Cross-pitch face milling cutter for cast iron machining[Features]Close pitch and extra close pitch cutters for high productivity and long tool life12-corner tip

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	89.4 ～ 109	Cast Iron	-	-	-	Arbor	27	-	-	Carbide Coat

  From: 37,097,835 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting

  SANDVIK

  Suitable not only for general milling but also for mold making, first recommendation for roughing

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 mm ～ 160 mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium	Rough and medium rough processing / Finishing	50 ～ 63	3 ～ 8	Arbor	22 ～ 50.8	-	6 ～ 10	Carbide Coat

  From: 15,998,818 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Cylindrical Shank R300-A

  SANDVIK

  [Features]Round-insert end millFor everything from roughing through to medium cutting and high-feed machiningFor profilingCoarse pitchCylindrical shank

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	10 mm ～ 32 mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Finishing	160 ～ 250	2	With handle	16 ～ 32	-	0.7 ～ 7	-

  From: 8,350,941 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 590 Cutter For Face Milling Machining Of Aluminum Alloy, Cast Iron, High-Hardness Steel Steel HSK R590-HA

  SANDVIK

  Light cutting face mill suitable for high-speed finishing[Features]Tool is designed with a serrated tip interface for increased stability and reduced run-out

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	50 mm ～ 80 mm	Quenched and tempered steel / high hardness steel / Cast Iron / Aluminum / Copper	Finishing	-	4 ～ 6	Centering Plug	48	-	-	Carbide Coat

  From: 26,755,775 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 325 Thread Whirling Cutter 325-12-16M

  SANDVIK

  Suitable for threading on most automatic lathes and whirling units[Features]High-speed threading of rough-machined slender parts to machine a variety of high-precision screws

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	Stainless Steel / Cast Iron / Aluminum / Copper	-	-	6	-	32 ～ 52	-	-	-

  From: 29,351,310 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 390 Arbor Mounting RA390-J

  SANDVIK

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	100 mm ～ 125 mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	-	63	5 ～ 8	Arbor	31.75 ～ 38.1	63	15.7	Carbide Coat

  From: 24,815,085 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroMill 245 Cutter

  SANDVIK

  [Features]· High Rake Cutter· Mirror Finish· High Accuracy· High speed machining[Applications]· For face milling· Supports any kind of workpiece

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	125	-	-	-	-	-	-	-	-	-

  From: 31,457,427 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  MULTI CHAMFER TOOL

  EXPOWER

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 1,624,395 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s)

  5 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner diameter double clamp holder A-DSKN type (inner diameter machining)

  KYOCERA

  【特長】・A-DSKN型：内径ダブルクランプホルダ(ワンアクションで強固にクランプ)。フレキシブルクーラントホールで安定加工を実現。【用途】・ボーリングバー・内径加工用【商品仕様】・適合チップ：SN○○1204・ダブルクランプ方式・フレキシブルクーラントホール搭載・最大突出し量L/D=？3・JANコード：4960664730858・トラスココード：825-0037

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 6,688,331 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder for internal machining C-STLB-AN type

  KYOCERA

  【特長】・C-STLB-AN型：優れた切りくず排出性を実現するダイナミックバーです。【用途】・ボーリングバー・内径・奥端面加工用【商品仕様】・適合チップ：TB○○0601・スクリュークランプ方式・超硬バー：最大突出し量L/D=？7・JANコード：4960664766079・トラスココード：820-4987

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 7,202,044 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  京セラ 内径加工用ホルダ

  KYOCERA

  【特長】・E-SCLC-AN型：優れた切りくず排出性を実現するダイナミックバーです。【用途】・ボーリングバー・内径・奥端面加工用【商品仕様】・適合チップ：CC○○0602・スクリュークランプ方式・オイルホール付き・超硬バー：最大突出し量L/D=？7・JANコード：4960664766154・トラスココード：820-5536

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 7,410,528 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  京セラ 内径加工用ホルダ

  KYOCERA

  【特長】・E-STLP-AN型：優れた切りくず排出性を実現するダイナミックバーです。【用途】・ボーリングバー・内径・奥端面加工用【商品仕様】・適合チップ：TP○○0902・スクリュークランプ方式・オイルホール付き・超硬バー：最大突出し量L/D=？7・JANコード：4960664766345・トラスココード：820-5555

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 8,091,577 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  京セラ 内径加工用ホルダ

  KYOCERA

  【用途】・EZバー(2コーナチップバー)用スリーブ【商品仕様】・EZH-CT型・オイルホール付き・適合EZバーシャンク：φ2.0・JANコード：4960664672493・トラスココード：547-4116

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 6,308,261 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  京セラ 溝入れ用ホルダ

  KYOCERA

  【特長】・KGDF-Z型：Wグリップ(チップ横ずれ防止を防止機構)の採用で安定加工を実現。一体型ホルダで高剛性。【用途】・端面溝入れホルダ【商品仕様】・幅(mm)：50・適合チップ：GDFM/GDFMS・奥行(mm)：360・溝幅(mm)：4.0・高さ(mm)：50・一体型・JANコード：4960664696147・トラスココード：825-0071

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 6,023,209 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  京セラ ミーリング用ホルダ

  KYOCERA

  【特長】・MEWH型：両面4コーナ仕様の新世代ヘリカルエンドミル。良好な加工面と安定加工を実現。【用途】・ヘリカルエンドミル・片削り・溝削り・平面削り【商品仕様】・幅(mm)：60・奥行(mm)：360・高さ(mm)：60・適合チップ：LOMU1004・コーナ角：90°・スクリュークランプ方式・ウェルドンシャンク・先端へのオイルホール付き・JANコード：4960664688661・トラスココード：825-0105

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 31,487,899 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera High Feed Cutter MFH Type End Mill

  KYOCERA

  【特長】・MFH型：高能率・高送りカッタ。3次元凸型切刃でビビりに強い。高い切りくず排出性と加工時間の短縮を実現。【用途】・高送りエンドミル・平面削り・斜め沈み加工・ヘリカル加工・バーチカル加工【商品仕様】・幅(mm)：60・奥行(mm)：360・高さ(mm)：60・適合チップ：SOMT1004・スクリュークランプ方式・ロングシャンク・JANコード：4960664717446・トラスココード：825-0122

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Inclined Cuts / Vertical	32 ～ 40	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium	-	150 ～ 300	2 ～ 4	With handle	32	50 ～ 180	-	Carbide Coat

  From: 7,618,359 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera High Feed Cutter MRX Type Face Mill

  KYOCERA

  【特長】・MRX型：低抵抗設計で良好な切削性、高能率加工を実現するラジアスカッタ【用途】・ラジアスフェースミル・R削り・倣い・掘込み・平面削り【商品仕様】・適合チップ：RPMT1605/RPGT1605・スクリュークランプ方式・インロー部インチ仕様・JANコード：4960664695379・トラスココード：550-6778

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Inclined Cuts	80	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium	-	50	6	Arbor	-	-	-	Carbide Coat

  From: 11,623,766 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Machining Application
blade diameter D(φ)
work material
Finish category
Overall length (L)(mm)
Number of flutes(sheet)
Mounting Method
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Maximum Cutting Depth (Ad)(mm)
Compatible Tip Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	OSG	FUJIGEN	FUJIGEN	FUJIGEN	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	ASAHI TOOLS	DIJET	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	EXPOWER	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product SeriesDòng sản phẩm	PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type	PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type	Aero Mill (Negative Type)	Aero Mill (Positive Type)	Corner Tool	SEC-Ace Mill, DPGF4000 Type	RF4000 Type High-Speed Cutter for Aluminum	Used for SEC-Sumi Power Mill, PWC Model PWCF-R	Used for SEC-Wave Mill, WEX Model WEX-E	Used for SEC-Wave Mill, WFX Model WFXF-E	WFX-R For SEC-Wave Mill WFX Model	SEC-Metal Slash Mill, MSX Model MSX-E	Used for SEC-Wave Radius Mill, WRCX Model WRCXF-RS	SEC-Wave Repeater for WRX Type, WRX-R (S)	SEC-Metal Slash Mill (modular type), MSX Model MSX-M-Z	SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius less than 3.2	Full Cut Mill (FCR type Long)	Full Cut Mill (FCR type Standard)	Full Cut Mill FCM Type Straight Shank Type	Full Cut Mill FCR Type Straight Shank Type	Shell End Mill for MCS, MC G2	Mirror Bore BNM Shape	MFWN90 Type Face Mill Holder	Half Side Slot Mill with Hub Left Hand	CoroMill 328 Cutter	CoroMill 365 Cutter	CoroMill R216 Ball End Mill	Side Cutter, Milling Cutter, Front Face Milling Cutter	CoroMill S-60 Face Milling Cutter	CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting	CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Cylindrical Shank R300-A	CoroMill 590 Cutter For Face Milling Machining Of Aluminum Alloy, Cast Iron, High-Hardness Steel Steel HSK R590-HA	CoroMill 325 Thread Whirling Cutter 325-12-16M	CoroMill 390 Arbor Mounting RA390-J	Sandvik CoroMill 245 Cutter	MULTI CHAMFER TOOL	Inner diameter double clamp holder A-DSKN type (inner diameter machining)	Holder for internal machining C-STLB-AN type	京セラ 内径加工用ホルダ	京セラ 内径加工用ホルダ	京セラ 内径加工用ホルダ	京セラ 溝入れ用ホルダ	京セラ ミーリング用ホルダ	Kyocera High Feed Cutter MFH Type End Mill	Kyocera High Feed Cutter MRX Type Face Mill
From	6,288,141 VND	5,718,638 VND	5,983,619 VND	5,983,619 VND	5,152,282 VND	15,502,092 VND	33,308,755 VND	21,980,068 VND	5,340,149 VND	10,619,906 VND	7,439,344 VND	7,778,488 VND	10,619,906 VND	15,921,105 VND	7,778,488 VND	15,539,469 VND	6,849,906 VND	6,601,296 VND	4,494,058 VND	6,088,274 VND	12,957,455 VND	4,040,210 VND	10,839,052 VND	45,135,339 VND	13,038,061 VND	19,078,384 VND	26,937,581 VND	21,477,646 VND	37,097,835 VND	15,998,818 VND	8,350,941 VND	26,755,775 VND	29,351,310 VND	24,815,085 VND	31,457,427 VND	1,624,395 VND	6,688,331 VND	7,202,044 VND	7,410,528 VND	8,091,577 VND	6,308,261 VND	6,023,209 VND	31,487,899 VND	7,618,359 VND	11,623,766 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	12 Day(s)	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	12 Day(s)	5 Day(s)	9 Day(s) or more	9 Day(s) or more	9 Day(s)	9 Day(s) or more	12 Day(s)	12 Day(s)	12 Day(s)	7 Day(s) or more	9 Day(s) or more
Machining Application	Plane / Side / Groove	Plane / Side / Groove / Vertical	Plane / Side	Plane / Side	Plane / Side	Plane / Groove / Chamfer	Plane	Plane / Side / Groove / Chamfer	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Groove	Plane / Groove	Plane / Side / Groove	Plane / Groove	Plane / Side / Groove	Side / Groove / Plunging (Z feed)	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove	Groove	Plane / Side / Groove / Vertical	-	Groove / Chamfer	Plane / Side / Groove	Groove	Plane / Side / Groove	Plane	Plane / Side / Groove	Plane	-	-	Plane / Side	-	-	-	-	-	-	-	-	-	Plane / Groove / Inclined Cuts / Vertical	Plane / Inclined Cuts
blade diameter D(φ)	16 ～ 63	13.2 ～ 46.4	30 ～ 40	30 ～ 40	30 ～ 80	80 ～ 157	80 ～ 200	80 ～ 200	25 ～ 63	50 ～ 80	50 ～ 250	32 ～ 63	50 ～ 100	50 ～ 100	32 ～ 40	50 ～ 125	16 ～ 32	16 ～ 32	12 ～ 50	17 ～ 33	50 ～ 100	8 ～ 30	-	-	39 ～ 44	69.7mm ～ 166.7mm	50mm	52mm	89.4 ～ 109	50 mm ～ 160 mm	10 mm ～ 32 mm	50 mm ～ 80 mm	-	100 mm ～ 125 mm	125	-	-	-	-	-	-	-	-	32 ～ 40	80
work material	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Stainless Steel / Aluminum / Resin	Stainless Steel / Aluminum / Resin	general steel / Stainless Steel / Aluminum / Resin	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	Aluminum	Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	Aluminum	-	-	-	-	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper / Resin	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	-	general steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium	Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Quenched and tempered steel / high hardness steel / Cast Iron / Aluminum / Copper	Stainless Steel / Cast Iron / Aluminum / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	-	-	-	-	-	-	-	-	-	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium
Finish category	-	-	Finishing	Finishing	Finishing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	-	-	-	-	-	-	-	-	Finishing	Rough and medium rough processing	Finishing	Rough and medium rough processing	-	Rough and medium rough processing / Finishing	Finishing	Finishing	-	-	-	-	-	-	-	-	-	-	-	-	-
Overall length (L)(mm)	90 ～ 190	140 ～ 300	85	85	105 ～ 200	-	-	-	120 ～ 220	120	-	150 ～ 250	-	-	63	-	-	-	90 ～ 180	120 ～ 180	60 ～ 110	83 ～ 240	-	-	125	-	171	-	-	50 ～ 63	160 ～ 250	-	-	63	-	-	-	-	-	-	-	-	-	150 ～ 300	50
Number of flutes(sheet)	2 ～ 6	2 ～ 5	3	3	2 ～ 4	6 ～ 12	6 ～ 12	9 ～ 24	2 ～ 6	4 ～ 6	3 ～ 12	2 ～ 4	4 ～ 6	8 ～ 24	2 ～ 3	4 ～ 7	2	2 ～ 3	1 ～ 5	2 ～ 3	6 ～ 10	-	3 ～ 18	6 ～ 10	2 ～ 3	6 ～ 18	2	3	-	3 ～ 8	2	4 ～ 6	6	5 ～ 8	-	-	-	-	-	-	-	-	-	2 ～ 4	6
Mounting Method	With handle	With handle	With handle	With handle	With handle	Arbor	Arbor	Arbor	With handle	With handle	Arbor	With handle	Arbor	Arbor	With handle	Arbor	With handle	With handle	With handle	With handle	Arbor	With handle	-	-	With handle	Arbor	With handle	Arbor	Arbor	Arbor	With handle	Centering Plug	-	Arbor	-	-	-	-	-	-	-	-	-	With handle	Arbor
Shank diameter (d)(mm)	16 ～ 32	25 ～ 42	-	-	-	-	-	-	20 ～ 42	32	-	32 ～ 42	-	-	17	-	-	-	16 ～ 32	16 ～ 32	-	12 ～ 32	-	-	25	22 ～ 50.8	40	-	27	22 ～ 50.8	16 ～ 32	48	32 ～ 52	31.75 ～ 38.1	-	-	-	-	-	-	-	-	-	32	-
Underneck length (ℓ1)(mm)	25 ～ 90	40 ～ 180	-	-	-	-	-	-	25 ～ 80	30	-	50 ～ 120	-	-	40	-	45 ～ 90	25 ～ 50	15 ～ 48	25 ～ 48	-	18.5 ～ 49	-	-	23	-	-	-	-	-	-	-	-	63	-	-	-	-	-	-	-	-	-	50 ～ 180	-
Maximum Cutting Depth (Ad)(mm)	-	-	-	-	-	9.5	3 (When using Sumidia Indexable Inserts), 10 (When using super hard tip)	15	14	10	10	1 ～ 2.5	6 ～ 8	27 ～ 53	1 ～ 2	16 ～ 18	-	-	-	-	-	-	-	-	3 ～ 4	6	44.6	2	-	6 ～ 10	0.7 ～ 7	-	-	15.7	-	-	-	-	-	-	-	-	-	-	-
Compatible Tip Material	Carbide Coat / No Carbide Coat	Carbide Coat	Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD)	Carbide Coat / No Carbide Coat	No Carbide Coat	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat	-	Carbide Coat	-	Carbide Coat	-	-	-	-	-	-	-	-	-	Carbide Coat	Carbide Coat

Loading...Tải…