Cutters / Indexable End Mills（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill (FCR type Standard)

  BIG DAISHOWA SEIKI

  [Features]· Dual face contact integrated type provides even higher rigidity. Tip with enhanced rigidity, allowing tough and stable ramping

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Plunging (Z feed)	16 ～ 32	-	-	-	2 ～ 3	With handle	-	25 ～ 50	-	-

  From: 6,601,296 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Aero Chipper ALX Model Bore Type Milling Cutter

  DIJET

  [Features]· It is a tool with excellent abrasion resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove / Vertical	50 ～ 63	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	-	4 ～ 5	Arbor	-	-	-	-

  From: 19,264,758 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mirror Bore C Body, BNM-S-C Shape

  DIJET

  It is a tool with excellent abrasion resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	6 ～ 30	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	60 ～ 300	-	With handle	6 ～ 32	-	-	-

  From: 7,599,233 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFPN45 Type Face Mill

  KYOCERA

  [Features]·The pentagon (10 corners) insert reduces the cost per corner.·The helical cutting-edge design and double-edge position improve low cutting edge and wear resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Chamfer	-	-	-	-	4 ～ 20	-	-	-	-	-

  From: 10,830,986 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFPN45 Type End Mill

  KYOCERA

  The seizing prevention agent (MP-1) should be applied in a thin layer to the taper and threading of the clamp screw when fixing an insert.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Chamfer	-	-	-	110	3 ～ 5	-	32	-	-	-

  From: 7,817,045 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEW Type Head

  KYOCERA

  Be aware that chips or parts may scatter due to centrifugal force if accidentally rotating at the maximum rotation speed or higher.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	-	-	-	43 ～ 63	2 ～ 4	-	-	-	-	-

  From: 5,387,165 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFWN90 Type End Mill (With Coolant Holes at Tip Blade)

  KYOCERA

  The seizing prevention agent (MP-1) should be applied in a thin layer to the taper and threading of the clamp screw when fixing an insert.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	50 ～ 80	-	-	110	3 ～ 5	-	32	-	-	-

  From: 7,817,045 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSEL BORE Phoenix Series Roughing End Mill Bore Type

  OSG

  [Specifications]· Shape: Cutter· Blade Tip Replacement Type End Mill[Applications] Flat surfaces, side surfaces, grooves

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 80	-	-	74 ～ 88	3 ～ 4	Arbor	-	-	-	-

  From: 32,722,673 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MaXMill HEC Cutter Body AHEC

  OSG

  [Specifications]・ Shape: Cutter・ Indexable end mill[Applications]Plane, groove

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	80 ～ 160	-	-	-	10 ～ 20	Arbor	-	-	-	-

  From: 27,144,895 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C

  SANDVIK

  Shoulder face milling cutter with amazing performance● Wide range of applicationsCapable of face milling, shoulder milling, grooving and contouringImproved proximity with the introduction of an oversized cutter● Amazing productivityAchieves high cutting conditions with a highly rigid bodyHigh insert mounting rigidity due to flat insert seat● Outstanding machining accuracyLow resistance and high accuracy due to sharp tipBoth the bottom and sides are processed with high precision●GC4330, GC4340CVD grade for steel milling, ideal for versatile CoroMill® 490The Inveio coating provides excellent abrasion resistance and long tool lifespan

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	20 ～ 100	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Rough and medium rough processing / Finishing	-	2 ～ 10	Centering Plug	-	23 ～ 70	5.5 ～ 10	-

  From: 12,409,955 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting

  SANDVIK

  Suitable not only for general milling but also for mold making, first recommendation for roughing

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 mm ～ 160 mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium	Rough and medium rough processing / Finishing	50 ～ 63	3 ～ 8	Arbor	22 ～ 50.8	-	6 ～ 10	Carbide Coat

  From: 15,998,818 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 245 Face Milling, Cylindrical Shank R245-A

  SANDVIK

  High efficiency face milling machine cutterIt has achieved high precision milling operations from roughing to mirror finishing● For all face milling machine operations● All work materials are covered● From roughing to finishing● For low power machines● For long protrusion machining● For machining that requires high feed and surface roughness (wiper tip)

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	44.5 mm ～ 92.5mm	general steel / Stainless Steel / Cast Iron	Finishing	120	3 ～ 6	Arbor	32	-	6	Carbide Coat

  From: 13,353,411 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Cylindrical Shank R300-A

  SANDVIK

  [Features]Round-insert end millFor everything from roughing through to medium cutting and high-feed machiningFor profilingCoarse pitchCylindrical shank

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	10 mm ～ 32 mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Finishing	160 ～ 250	2	With handle	16 ～ 32	-	0.7 ～ 7	-

  From: 8,350,941 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 331 Full Side Cutter, Machining Width: 6.0-12.0 mm 331.32

  SANDVIK

  Sandvik, cutter / indexable end mill, CoroMill 331, full side cutter, processing width of 6.0 to 12.0 mm, 331.32.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Finishing	-	6 ～ 16	Arbor	27 ～ 50	-	-	Carbide Coat

  From: 38,248,384 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 790 (Aluminum End Mill) Shoulder Cutting / End Mill Cylindrical Shank R790-A

  SANDVIK

  Shoulder milling cutter for aluminum alloySerrated tip mounting for high reliability and reduced impact of tip tolerance on cutter diameter

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	25 mm ～ 40 mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Finishing	125 ～ 150	2 ～ 3	With handle	25 ～ 32	-	12	Carbide Coat

  From: 21,371,070 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera Milling Holder

  KYOCERA

  [Features]· MFH type: High efficiency/high feed cutter.· 3D convex type cutting edge is resistant to chatter.· High chip discharge performance realizes reduced machining time.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	-	-	-	-	-	-	-	-	-	-

  From: 13,975,200 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Die Jet Die Jet Mill 45 main body

  DIJET

  [Features]· Cutter for general/flat surface cutting.· Supports a wide range of applications from cast iron and general steel to hardened steel.· The cutter body is a G-body, featuring excellent rigidity and durability.· Life of cutter body is extended with a high-precision carbide shim.· Ultra-multi-flute type lineup also available.· Wiper tips for high-precision finish machining are also available in the product range.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	-	-	-	-	-	-	-	-	-	-

  From: 11,756,341 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  京セラ ミーリング用ホルダ

  KYOCERA

  【特長】・MEWH型：両面4コーナ仕様の新世代ヘリカルエンドミル。良好な加工面と安定加工を実現。【用途】・ヘリカルエンドミル・片削り・溝削り・平面削り【商品仕様】・幅(mm)：93・奥行(mm)：192・高さ(mm)：97・適合チップ：LOMU1004・コーナ角：90°・スクリュークランプ方式・インロー部：ミリ仕様・オイルホールなし・JANコード：4960664692361・トラスココード：825-0103

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 33,388,249 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  京セラ ミーリング用ホルダ

  KYOCERA

  【特長】・MEWH型：両面4コーナ仕様の新世代ヘリカルエンドミル。良好な加工面と安定加工を実現。【用途】・ヘリカルエンドミル・片削り・溝削り・平面削り【商品仕様】・幅(mm)：60・奥行(mm)：360・高さ(mm)：60・適合チップ：LOMU1505・コーナ角：90°・スクリュークランプ方式・ウェルドンシャンク・先端へのオイルホール付き・JANコード：4960664688678・トラスココード：825-0106

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 26,499,480 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  京セラ 内径加工用ホルダ

  KYOCERA

  【特長】・S-PTUN16型【用途】・ボーリングバー・内径加工用【商品仕様】・幅(mm)：35・奥行(mm)：180・高さ(mm)：29・適合チップ：TN○○1604・レバーロック方式・最大突出し量L/D=？3・JANコード：4960664732135・トラスココード：825-0169

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	-	-	-	-	-	-	-	-	-	-

  From: 5,168,051 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing Ball Cutter, End Mill Model

  MISUMI

  [Features]·Easy to manage due to the main and secondary cutting edges composed by 1 type of insert·A wide variety of small diameters from ø10

  • Volume Discount

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Inclined Cuts	16 ～ 25	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	200 ～ 250	2	With handle	20 ～ 32	27 ～ 40	14.4 ～ 22.3	Carbide Coat

  From: 12,901,928 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Finishing Ball Cutter, End Mill Model

  MISUMI

  [Features]·Tip exchange type ball cutter end mill type holder for finish·Shank material can be selected from steel and carbide according to application·Outer diameter: ⌀8 to ⌀32·Number of Flutes: 2 flutes·Compatible tip: NFBM-8 to 32

  • Volume Discount

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Inclined Cuts	10 ～ 16	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Finishing	123 ～ 132	1	With handle	12 ～ 16	-	-	Carbide Coat

  From: 9,317,676 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shoulder Milling Cutter, Arbor Mounting Model

  MISUMI

  [Features]·Blade tip replaceable arbor mounting type holder·General purpose shoulder milling cutter using ISO insert·Outer diameter: ⌀80,⌀100,⌀125·Pitch: 5, 6, 8 flutes·Compatible tip: TP□N43 type

  • Volume Discount

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	125	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	Rough and medium rough processing	-	8	Arbor	-	-	-	-

  From: 28,836,219 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Surface Processing Cutter DoPent TEN09

  TUNGALOY

  Screw clamp surface processing cutter[Features]· Cutting edge angle: 70°· Uses pentagonal double-sided inserts

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	125 ～ 160	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper	-	63	10 ～ 12	Arbor	-	63	6.4	Carbide Coat

  From: 24,111,051 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Type Cutter DOREC TPQ

  TUNGALOY

  Economical double-sided 4-cornered specification with sharpness equivalent to the positive type. Tough cutting blade for high-efficiency machining. Unique blade type that reduces cutting resistance

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	-	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	-	-	-	-	-	-	-	Carbide Coat

  From: 13,777,958 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MVG Type Slotting End Mill

  KYOCERA

  [Features]·This product is capable of ring grooving.cutting diameter D (⌀): 45Overall Length (mm): 120Shank diameter (d) (mm): 32

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	30 ～ 60	-	-	120	-	-	32	40	-	-

  From: 5,685,392 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Alpha Chamfering Mill CPC Type

  MITSUBISHI HITACHI TOOL

  [Features]· Sharp cutting blade produces a light, sharp feel.· Series includes chamfering angles 30°, 45°, 60° and tip diameters 5, 10, 20, 35 mm.· Supports chamfering work for all dimensions

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	31	-	Finishing	120	-	With handle	25	30	10.1	-

  From: 7,224,600 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PRC Phoenix Series Round Cutter Screw-in Type

  OSG

  A screw-in type cutter. For side cutting, grooving, engraving, shape cutting, etc.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove / Vertical	10 ～ 30	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	33 ～ 40	2 ～ 4	Centering Plug	-	-	-	Carbide Coat / No Carbide Coat

  From: 9,331,393 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type

  OSG

  The wide insert pocket improves chip removal capability, and the employment of a body relief shape that supports 3D machining enables highly efficient shape machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	10 ～ 88	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	40 ～ 250	2 ～ 10	With handle / Arbor	20 ～ 42	50 ～ 120	-	Carbide Coat / No Carbide Coat

  From: 6,032,799 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  F2133 SS Small Diameter Cutter Series, Cyclone Cutter, Straight Shank

  OSG

  High rake type end mill with little cutting resistance. Enables high performance machining with deep cuts and high feed rates.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Chamfer	63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	-	120	5	With handle	32	45	-	Carbide Coat / No Carbide Coat / Cermet

  From: 23,781,194 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  F3042B SL F3000 Series Positive Mill Neo Shell Type

  OSG

  Shell type that uses inserts with a 3-dimensional chip breaker with good cutting performance. Used in arbor for face mill.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	50	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	40	5	Arbor	-	-	-	Carbide Coat / No Carbide Coat

  From: 22,531,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  F3000 Series, Positive Mill, Neo Straight Shank /F3042ASS

  OSG

  An end mill type that uses a sharp, 3D breaker tip. Addition of a 20 mm shank with multi-flute specification with a small tip that is convenient for small machines.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	20	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	100	3	With handle	20	30	-	Carbide Coat / No Carbide Coat

  From: 5,184,741 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  F3000 Series, Positive Mill, Neo Straight Shank /F3042BSS

  OSG

  An end mill type that uses inserts with a 3D chip breaker with good cutting performance. There are a wide range of applicable inserts.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	32 ～ 63	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	150 ～ 200	3 ～ 4	With handle	32	45	-	Carbide Coat / No Carbide Coat

  From: 14,890,117 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSE Phoenix Series Shoulder Milling Cutter PSE Screw-In Type

  OSG

  Threaded type for shoulder milling cutter. Dedicated holders support various machining depths.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	16 ～ 40	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	27 ～ 40	2 ～ 6	Centering Plug	-	-	-	Carbide Coat / No Carbide Coat

  From: 7,603,605 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type

  OSG

  Indexable high-feed radius cutter, threaded type. Dedicated holders support various machining depths.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	13.2 ～ 46.4	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	140 ～ 300	2 ～ 5	With handle	25 ～ 42	40 ～ 180	-	Carbide Coat

  From: 5,718,638 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PHC Phoenix Series High Feed Radius Cutter Screw-in Type

  OSG

  PHC threaded type radius cutter. Machining applications: Surface, side surface, groove, digging, shape cutting

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	13.2 ～ 28.2	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium	-	35 ～ 40	2 ～ 4	Centering Plug	-	-	-	Carbide Coat

  From: 12,276,481 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PDR Phoenix Series High Efficiency Radius Cutter With Handle Type

  OSG

  A high-feed radius cutter series that uses a variable negative-chamfered insert that prevents chipping and reduces cutting force.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	20 ～ 105	general steel / high hardness steel / Cast Iron	-	63 ～ 306	2 ～ 6	With handle / Centering Plug	MT5-M16 ～ CN50.8	50 ～ 170	-	Carbide Coat

  From: 8,447,728 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Wedge Stop Type

  OSG

  OSG PHOENIX series, wedge type[Work Material]General steel / heat-treated steel / stainless steel / cast iron

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	100 ～ 200	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	-	50 ～ 63	14 ～ 25	Arbor	-	-	-	Carbide Coat

  From: 37,348,785 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aero Mill (Negative Type)

  FUJIGEN

  Small diameter shank lineup allows use for small machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	30 ～ 40	general steel / Stainless Steel / Aluminum / Resin	Finishing	85	3	With handle	-	-	-	Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD)

  From: 5,983,619 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aero Mill (Positive Type)

  FUJIGEN

  [Features]· Ideal for use in low-rigidity machines such as tapping centers.· It supports a variety of workpieces with the lineup of negative and positive types.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	30 ～ 40	Stainless Steel / Aluminum / Resin	Finishing	85	3	With handle	-	-	-	Carbide Coat / No Carbide Coat

  From: 5,983,619 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NEW Tiko Cutter

  FUJIGEN

  Ideal for use in low-rigidity machines such as tapping centers.[Features]· Small diameter shank lineup allows use for small machining.· Unique negative/positive method prevents chatter even with thin objects (can machining, etc.)

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	60 ～ 80	general steel / Stainless Steel / Aluminum / Resin	Finishing	120	3	With handle	-	-	-	Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD)

  From: 10,626,988 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NEW Nice Cut (PS Type)

  FUJIGEN

  [Features]· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	100 ～ 130	Stainless Steel / Aluminum / Resin	Finishing	123.5	3 ～ 6	With handle	-	-	-	Carbide Coat / No Carbide Coat

  From: 17,862,137 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NEW Nice Cut (NT Type)

  FUJIGEN

  [Features]· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	110 ～ 160	general steel / Stainless Steel / Aluminum / Resin	Finishing	120 ～ 123.5	3 ～ 6	With handle	-	-	-	Carbide Coat / No Carbide Coat / Cermet

  From: 17,862,137 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NEW Nice Cut Arm【1-6 Pieces Per Package】

  FUJIGEN

  [Features]2 types of nice cut arms, 3-blade and 6-blade.[Applications]It also supports high speed cutting.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	-	general steel / Stainless Steel / Aluminum / Resin	Finishing	-	3 ～ 6	With handle	-	-	-	Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD)

  From: 8,515,980 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Tool

  FUJIGEN

  [Features]Various corner radius machining is possible by exchanging inserts.[Applications]For finishing flat surfaces and sides.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	30 ～ 80	general steel / Stainless Steel / Aluminum / Resin	Finishing	105 ～ 200	2 ～ 4	With handle	-	-	-	No Carbide Coat

  From: 5,152,282 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Machining Application
blade diameter D(φ)
work material
Finish category
Overall length (L)(mm)
Number of flutes(sheet)
Mounting Method
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Maximum Cutting Depth (Ad)(mm)
Compatible Tip Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	BIG DAISHOWA SEIKI	DIJET	DIJET	KYOCERA	KYOCERA	KYOCERA	KYOCERA	OSG	OSG	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	KYOCERA	DIJET	KYOCERA	KYOCERA	KYOCERA	MISUMI	MISUMI	MISUMI	TUNGALOY	TUNGALOY	KYOCERA	MITSUBISHI HITACHI TOOL	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN
Product SeriesDòng sản phẩm	Full Cut Mill (FCR type Standard)	Aero Chipper ALX Model Bore Type Milling Cutter	Mirror Bore C Body, BNM-S-C Shape	MFPN45 Type Face Mill	MFPN45 Type End Mill	MEW Type Head	MFWN90 Type End Mill (With Coolant Holes at Tip Blade)	PSEL BORE Phoenix Series Roughing End Mill Bore Type	MaXMill HEC Cutter Body AHEC	End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C	CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting	CoroMill 245 Face Milling, Cylindrical Shank R245-A	CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Cylindrical Shank R300-A	CoroMill 331 Full Side Cutter, Machining Width: 6.0-12.0 mm 331.32	CoroMill 790 (Aluminum End Mill) Shoulder Cutting / End Mill Cylindrical Shank R790-A	Kyocera Milling Holder	Die Jet Die Jet Mill 45 main body	京セラ ミーリング用ホルダ	京セラ ミーリング用ホルダ	京セラ 内径加工用ホルダ	Roughing Ball Cutter, End Mill Model	Finishing Ball Cutter, End Mill Model	Shoulder Milling Cutter, Arbor Mounting Model	Surface Processing Cutter DoPent TEN09	Bore Type Cutter DOREC TPQ	MVG Type Slotting End Mill	Alpha Chamfering Mill CPC Type	PRC Phoenix Series Round Cutter Screw-in Type	PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type	F2133 SS Small Diameter Cutter Series, Cyclone Cutter, Straight Shank	F3042B SL F3000 Series Positive Mill Neo Shell Type	F3000 Series, Positive Mill, Neo Straight Shank /F3042ASS	F3000 Series, Positive Mill, Neo Straight Shank /F3042BSS	PSE Phoenix Series Shoulder Milling Cutter PSE Screw-In Type	PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type	PHC Phoenix Series High Feed Radius Cutter Screw-in Type	PDR Phoenix Series High Efficiency Radius Cutter With Handle Type	Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Wedge Stop Type	Aero Mill (Negative Type)	Aero Mill (Positive Type)	NEW Tiko Cutter	NEW Nice Cut (PS Type)	NEW Nice Cut (NT Type)	NEW Nice Cut Arm【1-6 Pieces Per Package】	Corner Tool
From	6,601,296 VND	19,264,758 VND	7,599,233 VND	10,830,986 VND	7,817,045 VND	5,387,165 VND	7,817,045 VND	32,722,673 VND	27,144,895 VND	12,409,955 VND	15,998,818 VND	13,353,411 VND	8,350,941 VND	38,248,384 VND	21,371,070 VND	13,975,200 VND	11,756,341 VND	33,388,249 VND	26,499,480 VND	5,168,051 VND	12,901,928 VND	9,317,676 VND	28,836,219 VND	24,111,051 VND	13,777,958 VND	5,685,392 VND	7,224,600 VND	9,331,393 VND	6,032,799 VND	23,781,194 VND	22,531,394 VND	5,184,741 VND	14,890,117 VND	7,603,605 VND	5,718,638 VND	12,276,481 VND	8,447,728 VND	37,348,785 VND	5,983,619 VND	5,983,619 VND	10,626,988 VND	17,862,137 VND	17,862,137 VND	8,515,980 VND	5,152,282 VND
Days to ShipSố ngày giao hàng	12 Day(s)	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	12 Day(s)	12 Day(s)	12 Day(s)	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Machining Application	Plane / Side / Groove / Plunging (Z feed)	Side / Groove / Vertical	Groove	Plane / Chamfer	Plane / Chamfer	Plane / Side / Groove / Vertical	Plane / Side / Groove / Vertical	Plane / Side / Groove	Plane / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane	Plane	Groove	Side	Plane	Plane	-	-	-	Inclined Cuts	Inclined Cuts	Side / Groove	Plane	Side / Groove	Groove	Plane / Groove / Chamfer	Side / Groove / Vertical	Plane / Side / Groove / Vertical	Plane / Chamfer	Side / Groove	Side / Groove	Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Vertical	Plane / Side / Groove / Vertical	Plane / Side / Groove / Vertical	Plane	Plane / Side	Plane / Side	Plane / Side	Plane / Side	Plane / Side	Plane / Side	Plane / Side
blade diameter D(φ)	16 ～ 32	50 ～ 63	6 ～ 30	-	-	-	50 ～ 80	50 ～ 80	80 ～ 160	20 ～ 100	50 mm ～ 160 mm	44.5 mm ～ 92.5mm	10 mm ～ 32 mm	-	25 mm ～ 40 mm	-	-	-	-	-	16 ～ 25	10 ～ 16	125	125 ～ 160	-	30 ～ 60	31	10 ～ 30	10 ～ 88	63	50	20	32 ～ 63	16 ～ 40	13.2 ～ 46.4	13.2 ～ 28.2	20 ～ 105	100 ～ 200	30 ～ 40	30 ～ 40	60 ～ 80	100 ～ 130	110 ～ 160	-	30 ～ 80
work material	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	-	-	-	-	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium	general steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	-	-	-	-	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	-	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium	general steel / high hardness steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron	general steel / Stainless Steel / Aluminum / Resin	Stainless Steel / Aluminum / Resin	general steel / Stainless Steel / Aluminum / Resin	Stainless Steel / Aluminum / Resin	general steel / Stainless Steel / Aluminum / Resin	general steel / Stainless Steel / Aluminum / Resin	general steel / Stainless Steel / Aluminum / Resin
Finish category	-	-	-	-	-	-	-	-	-	Rough and medium rough processing / Finishing	Rough and medium rough processing / Finishing	Finishing	Finishing	Finishing	Finishing	-	-	-	-	-	Rough and medium rough processing	Finishing	Rough and medium rough processing	-	-	-	Finishing	-	-	-	-	-	-	-	-	-	-	-	Finishing	Finishing	Finishing	Finishing	Finishing	Finishing	Finishing
Overall length (L)(mm)	-	-	60 ～ 300	-	110	43 ～ 63	110	74 ～ 88	-	-	50 ～ 63	120	160 ～ 250	-	125 ～ 150	-	-	-	-	-	200 ～ 250	123 ～ 132	-	63	-	120	120	33 ～ 40	40 ～ 250	120	40	100	150 ～ 200	27 ～ 40	140 ～ 300	35 ～ 40	63 ～ 306	50 ～ 63	85	85	120	123.5	120 ～ 123.5	-	105 ～ 200
Number of flutes(sheet)	2 ～ 3	4 ～ 5	-	4 ～ 20	3 ～ 5	2 ～ 4	3 ～ 5	3 ～ 4	10 ～ 20	2 ～ 10	3 ～ 8	3 ～ 6	2	6 ～ 16	2 ～ 3	-	-	-	-	-	2	1	8	10 ～ 12	-	-	-	2 ～ 4	2 ～ 10	5	5	3	3 ～ 4	2 ～ 6	2 ～ 5	2 ～ 4	2 ～ 6	14 ～ 25	3	3	3	3 ～ 6	3 ～ 6	3 ～ 6	2 ～ 4
Mounting Method	With handle	Arbor	With handle	-	-	-	-	Arbor	Arbor	Centering Plug	Arbor	Arbor	With handle	Arbor	With handle	-	-	-	-	-	With handle	With handle	Arbor	Arbor	-	-	With handle	Centering Plug	With handle / Arbor	With handle	Arbor	With handle	With handle	Centering Plug	With handle	Centering Plug	With handle / Centering Plug	Arbor	With handle	With handle	With handle	With handle	With handle	With handle	With handle
Shank diameter (d)(mm)	-	-	6 ～ 32	-	32	-	32	-	-	-	22 ～ 50.8	32	16 ～ 32	27 ～ 50	25 ～ 32	-	-	-	-	-	20 ～ 32	12 ～ 16	-	-	-	32	25	-	20 ～ 42	32	-	20	32	-	25 ～ 42	-	MT5-M16 ～ CN50.8	-	-	-	-	-	-	-	-
Underneck length (ℓ1)(mm)	25 ～ 50	-	-	-	-	-	-	-	-	23 ～ 70	-	-	-	-	-	-	-	-	-	-	27 ～ 40	-	-	63	-	40	30	-	50 ～ 120	45	-	30	45	-	40 ～ 180	-	50 ～ 170	-	-	-	-	-	-	-	-
Maximum Cutting Depth (Ad)(mm)	-	-	-	-	-	-	-	-	-	5.5 ～ 10	6 ～ 10	6	0.7 ～ 7	-	12	-	-	-	-	-	14.4 ～ 22.3	-	-	6.4	-	-	10.1	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Compatible Tip Material	-	-	-	-	-	-	-	-	-	-	Carbide Coat	Carbide Coat	-	Carbide Coat	Carbide Coat	-	-	-	-	-	Carbide Coat	Carbide Coat	-	Carbide Coat	Carbide Coat	-	-	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat / Cermet	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD)	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD)	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat / Cermet	Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD)	No Carbide Coat

Loading...Tải…