Cutters / Indexable End Mills（work material：Quenched and tempered steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 590 Cutter

  SANDVIK

  A light-cutting face milling cuter suitable for high-speed finishing[Features]The tool is designed with a serrated-tip interface for increased stability and reduced run-out

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	63mm ～ 160mm	Quenched and tempered steel	Finishing	40 ～ 63	5 ～ 10	Arbor	22 ～ 40	-	-	Carbide Coat

  From: 30,615,236 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFH Type High Feed Cutter MFH Mini End Mill

  KYOCERA

  [Features]· Economical with double-sided 4 corners.· With a small diameter / multi-flute specification, machining can be realized with high efficiency/feed even when using small machining centers.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	16 ～ 32	Quenched and tempered steel	-	79 ～ 200	2 ～ 6	With handle	16 ～ 32	20 ～ 120	-	-

  From: 5,572,296 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mirror Radius End Mill (Ultra Hard Shank), RNM-S-C Shape

  DIJET

  [Specifications]· Mounting Method: Type with Handle· Work materials: General steel, tempered steel, high hardness steel, stainless steel, cast iron[Applications] Flat Surfaces / Side Surfaces / Grooves / Vertical

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	6 ～ 25	Quenched and tempered steel	-	80 ～ 250	-	With handle	6 ～ 25	30 ～ 170	-	-

  From: 6,992,594 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill for WGX Type, WGX-R(S)

  SUMITOMO ELECTRIC HARDMETAL

  Achieves low resistance with a dedicated chip breaker. For general cutting of steel and cast iron.[Features]・ The high rake chip breaker designed for the WGX type achieves low resistance.・ Achieves an excellent finished surface with improved blade runout accuracy and a unique sweeping blade shape.・ Addition of chamfer suppresses burrs and edge chips.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	40 ～ 250	Quenched and tempered steel	Rough and medium rough processing	-	3 ～ 10	Arbor	-	-	6	-

  From: 7,227,280 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 390 End Mill Threaded-Type Coupling R390-T

  SANDVIK

  [Features]Rivals the performance of solid end millsHigh precisionNo miss-matchesShoulder cuttingGroovingProfilingHelical machiningLappingCan be used for all types of machiningThreaded-type coupling

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	16 ～ 42	Quenched and tempered steel	Rough and medium rough processing / Finishing	-	2 ～ 4	Centering Plug	8 ～ 16	25 ～ 45	10	Carbide Coat

  From: 10,338,223 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type

  OSG

  The employment of this high-precision insert achieves excellent bottom surface roughness. Due to the effect of the bottom notch, cutting chips are split into 2 during ramping and helical milling, which suppresses chip biting and entanglement, enabling smooth milling.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	16 ～ 63	Quenched and tempered steel	-	90 ～ 190	2 ～ 6	With handle	16 ～ 32	25 ～ 90	-	Carbide Coat / No Carbide Coat

  From: 6,288,141 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PHC BORE Phoenix Series High Feed Radius Cutter Bore Type

  OSG

  PHC bore type radius cutter. Machining applications: planes, sides, grooves, carving, shape shaving

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	23.4 ～ 83.4	Quenched and tempered steel	-	40 ～ 63	3 ～ 8	Arbor	-	-	-	Carbide Coat

  From: 9,704,373 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill WEX2000F Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	40 ～ 63	Quenched and tempered steel	Rough and medium rough processing	-	-	Arbor	-	-	10	-

  From: 12,273,924 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Multifunctional, Standard Type WMM2000E

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Enables shoulder milling, grooving, and drilling with a single WMM type.・ Ideal for high efficiency ramping, helical drilling, and pocket machining.・ Use of a wave mill insert achieves both cutting performance and cutting edge strength.・ Reduced cutting force realizes the same cutting chip discharge amount as conventional products with a lower required power.・ One type of insert enables easy tool management.・ Ideal for cutting stainless steel, etc.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	20 ～ 30	Quenched and tempered steel	Rough and medium rough processing	130 ～ 150	3 ～ 5	With handle	20 ～ 25	35 ～ 50	17～35	-

  From: 5,573,262 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Repeater for WRX Type, WRX-R (S)

  SUMITOMO ELECTRIC HARDMETAL

  Optimizes cutting edge placement to realize low resistance and low vibration machining. Smooth chip discharge and high body rigidity are made possible by the lead and special pocket shape.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 100	Quenched and tempered steel	Rough and medium rough processing	-	8 ～ 24	Arbor	-	-	27 ～ 53	-

  From: 15,921,105 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CERATIZIT MaxiMill 274 Milling Cutter

  OSG

  [Specifications]・ Shape: Cutter・ Indexable end mill[Applications]Plane, groove, chamfer

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	18.9 ～ 123.7	Quenched and tempered steel	Rough to Finish Processing	40$40.7 ～ 98.7	3 ～ 12	With handle / Arbor	20 ～ 25	25.7 ～ 40.7	-	Carbide Coat

  From: 9,116,718 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Series Face Milling Cutter, Square, Bore Type

  OSG

  [Features]・ OSG Phoenix Series・ Suitable for milling machine.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	50 ～ 125	Quenched and tempered steel	-	45 ～ 63	4 ～ 8	Arbor	-	-	-	Carbide Coat

  From: 13,434,766 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Bore (rough machining long blade type), WBMR2000L Type

  SUMITOMO ELECTRIC HARDMETAL

  A sharp, low-resistance, wave blade type with a high rake angle. Strong anti-rotation mechanism suppresses tip movement while cutting.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	20 ～ 50	Quenched and tempered steel	Rough and medium rough processing	140 ～ 350	-	With handle	25 ～ 50.8	60 ～ 250	30～69	-

  From: 10,004,960 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, FPG Model FPG-R/L

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·Right-handed or left-handed can be selected.·An ace mill for general purposes, slab milling, grooving, and chamfering of difficult-to-cut materials.Maximum cutting depth (Ad) (mm): 5.5

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	80 ～ 315	Quenched and tempered steel	Rough and medium rough processing	-	4 ～ 14	Arbor	-	-	5.5	-

  From: 11,903,304 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGX Model WGX-EW

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·This product provides an excellent finished surface by improving the runout accuracy of the cutting edge and by using a unique wiper edge shape.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	32 ～ 63	Quenched and tempered steel	Rough and medium rough processing	125	3 ～ 5	With handle	32	40	6	-

  From: 8,075,535 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model WGC(F)-RS

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·The high precision of the body and inserts allows for high-quality machining.·This product has high sharpness and strength, and a wide variety of insert items can meet a wide range of needs.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	32 ～ 63	Quenched and tempered steel	Rough and medium rough processing	-	3 ～ 6	Arbor	-	-	4 ～ 6	-

  From: 5,870,112 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill for WGX Type, WGXF-R(S)

  SUMITOMO ELECTRIC HARDMETAL

  Achieves low resistance with a dedicated chip breaker. For general cutting of steel and cast iron.[Features]・ The high rake chip breaker designed for the WGX type achieves low resistance.・ Achieves an excellent finished surface with improved blade runout accuracy and a unique sweeping blade shape.・ Addition of chamfer suppresses burrs and edge chips.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	50 ～ 250	Quenched and tempered steel	Rough and medium rough processing	-	5 ～ 24	Arbor	-	-	6	-

  From: 9,983,912 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill for WGX Type, WGXM-R(S)

  SUMITOMO ELECTRIC HARDMETAL

  Achieves low resistance with a dedicated chip breaker. For general cutting of steel and cast iron.[Features]・ The high rake chip breaker designed for the WGX type achieves low resistance.・ Achieves an excellent finished surface with improved blade runout accuracy and a unique sweeping blade shape.・ Addition of chamfer suppresses burrs and edge chips.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	50 ～ 250	Quenched and tempered steel	Rough and medium rough processing	-	4 ～ 14	Arbor	-	-	6	-

  From: 8,817,561 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aero Chipper ALX Model Bore Type Milling Cutter

  DIJET

  [Features]· It is a tool with excellent abrasion resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove / Vertical	50 ～ 63	Quenched and tempered steel	-	-	4 ～ 5	Arbor	-	-	-	-

  From: 19,264,758 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mirror Bore C Body, BNM-S-C Shape

  DIJET

  It is a tool with excellent abrasion resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	6 ～ 30	Quenched and tempered steel	-	60 ～ 300	-	With handle	6 ～ 32	-	-	-

  From: 7,599,233 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C

  SANDVIK

  Shoulder face milling cutter with amazing performance● Wide range of applicationsCapable of face milling, shoulder milling, grooving and contouringImproved proximity with the introduction of an oversized cutter● Amazing productivityAchieves high cutting conditions with a highly rigid bodyHigh insert mounting rigidity due to flat insert seat● Outstanding machining accuracyLow resistance and high accuracy due to sharp tipBoth the bottom and sides are processed with high precision●GC4330, GC4340CVD grade for steel milling, ideal for versatile CoroMill® 490The Inveio coating provides excellent abrasion resistance and long tool lifespan

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	20 ～ 100	Quenched and tempered steel	Rough and medium rough processing / Finishing	-	2 ～ 10	Centering Plug	-	23 ～ 70	5.5 ～ 10	-

  From: 12,409,955 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting

  SANDVIK

  Suitable not only for general milling but also for mold making, first recommendation for roughing

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 mm ～ 160 mm	Quenched and tempered steel	Rough and medium rough processing / Finishing	50 ～ 63	3 ～ 8	Arbor	22 ～ 50.8	-	6 ～ 10	Carbide Coat

  From: 15,998,818 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Cylindrical Shank R300-A

  SANDVIK

  [Features]Round-insert end millFor everything from roughing through to medium cutting and high-feed machiningFor profilingCoarse pitchCylindrical shank

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	10 mm ～ 32 mm	Quenched and tempered steel	Finishing	160 ～ 250	2	With handle	16 ～ 32	-	0.7 ～ 7	-

  From: 8,350,941 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 331 Full Side Cutter, Machining Width: 6.0-12.0 mm 331.32

  SANDVIK

  Sandvik, cutter / indexable end mill, CoroMill 331, full side cutter, processing width of 6.0 to 12.0 mm, 331.32.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	Quenched and tempered steel	Finishing	-	6 ～ 16	Arbor	27 ～ 50	-	-	Carbide Coat

  From: 38,248,384 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 790 (Aluminum End Mill) Shoulder Cutting / End Mill Cylindrical Shank R790-A

  SANDVIK

  Shoulder milling cutter for aluminum alloySerrated tip mounting for high reliability and reduced impact of tip tolerance on cutter diameter

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	25 mm ～ 40 mm	Quenched and tempered steel	Finishing	125 ～ 150	2 ～ 3	With handle	25 ～ 32	-	12	Carbide Coat

  From: 21,371,070 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing Ball Cutter, End Mill Model

  MISUMI

  [Features]·Easy to manage due to the main and secondary cutting edges composed by 1 type of insert·A wide variety of small diameters from ø10

  • Volume Discount

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Inclined Cuts	16 ～ 25	Quenched and tempered steel	Rough and medium rough processing	200 ～ 250	2	With handle	20 ～ 32	27 ～ 40	14.4 ～ 22.3	Carbide Coat

  From: 12,901,928 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Finishing Ball Cutter, End Mill Model

  MISUMI

  [Features]·Tip exchange type ball cutter end mill type holder for finish·Shank material can be selected from steel and carbide according to application·Outer diameter: ⌀8 to ⌀32·Number of Flutes: 2 flutes·Compatible tip: NFBM-8 to 32

  • Volume Discount

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Inclined Cuts	10 ～ 16	Quenched and tempered steel	Finishing	123 ～ 132	1	With handle	12 ～ 16	-	-	Carbide Coat

  From: 9,317,676 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shoulder Milling Cutter, Arbor Mounting Model

  MISUMI

  [Features]·Blade tip replaceable arbor mounting type holder·General purpose shoulder milling cutter using ISO insert·Outer diameter: ⌀80,⌀100,⌀125·Pitch: 5, 6, 8 flutes·Compatible tip: TP□N43 type

  • Volume Discount

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	125	Quenched and tempered steel	Rough and medium rough processing	-	8	Arbor	-	-	-	-

  From: 28,836,219 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Surface Processing Cutter DoPent TEN09

  TUNGALOY

  Screw clamp surface processing cutter[Features]· Cutting edge angle: 70°· Uses pentagonal double-sided inserts

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	125 ～ 160	Quenched and tempered steel	-	63	10 ～ 12	Arbor	-	63	6.4	Carbide Coat

  From: 24,111,051 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bore Type Cutter DOREC TPQ

  TUNGALOY

  Economical double-sided 4-cornered specification with sharpness equivalent to the positive type. Tough cutting blade for high-efficiency machining. Unique blade type that reduces cutting resistance

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	-	Quenched and tempered steel	-	-	-	-	-	-	-	Carbide Coat

  From: 13,777,958 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PRC Phoenix Series Round Cutter Screw-in Type

  OSG

  A screw-in type cutter. For side cutting, grooving, engraving, shape cutting, etc.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove / Vertical	10 ～ 30	Quenched and tempered steel	-	33 ～ 40	2 ～ 4	Centering Plug	-	-	-	Carbide Coat / No Carbide Coat

  From: 9,331,393 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type

  OSG

  The wide insert pocket improves chip removal capability, and the employment of a body relief shape that supports 3D machining enables highly efficient shape machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	10 ～ 88	Quenched and tempered steel	-	40 ～ 250	2 ～ 10	With handle / Arbor	20 ～ 42	50 ～ 120	-	Carbide Coat / No Carbide Coat

  From: 6,032,799 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  F2133 SS Small Diameter Cutter Series, Cyclone Cutter, Straight Shank

  OSG

  High rake type end mill with little cutting resistance. Enables high performance machining with deep cuts and high feed rates.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Chamfer	63	Quenched and tempered steel	-	120	5	With handle	32	45	-	Carbide Coat / No Carbide Coat / Cermet

  From: 23,781,194 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  F3042B SL F3000 Series Positive Mill Neo Shell Type

  OSG

  Shell type that uses inserts with a 3-dimensional chip breaker with good cutting performance. Used in arbor for face mill.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	50	Quenched and tempered steel	-	40	5	Arbor	-	-	-	Carbide Coat / No Carbide Coat

  From: 22,531,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  F3000 Series, Positive Mill, Neo Straight Shank /F3042ASS

  OSG

  An end mill type that uses a sharp, 3D breaker tip. Addition of a 20 mm shank with multi-flute specification with a small tip that is convenient for small machines.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	20	Quenched and tempered steel	-	100	3	With handle	20	30	-	Carbide Coat / No Carbide Coat

  From: 5,184,741 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  F3000 Series, Positive Mill, Neo Straight Shank /F3042BSS

  OSG

  An end mill type that uses inserts with a 3D chip breaker with good cutting performance. There are a wide range of applicable inserts.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	32 ～ 63	Quenched and tempered steel	-	150 ～ 200	3 ～ 4	With handle	32	45	-	Carbide Coat / No Carbide Coat

  From: 14,890,117 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSE Phoenix Series Shoulder Milling Cutter PSE Screw-In Type

  OSG

  Threaded type for shoulder milling cutter. Dedicated holders support various machining depths.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	16 ～ 40	Quenched and tempered steel	-	27 ～ 40	2 ～ 6	Centering Plug	-	-	-	Carbide Coat / No Carbide Coat

  From: 7,603,605 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type

  OSG

  Indexable high-feed radius cutter, threaded type. Dedicated holders support various machining depths.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	13.2 ～ 46.4	Quenched and tempered steel	-	140 ～ 300	2 ～ 5	With handle	25 ～ 42	40 ～ 180	-	Carbide Coat

  From: 5,718,638 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PHC Phoenix Series High Feed Radius Cutter Screw-in Type

  OSG

  PHC threaded type radius cutter. Machining applications: Surface, side surface, groove, digging, shape cutting

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	13.2 ～ 28.2	Quenched and tempered steel	-	35 ～ 40	2 ～ 4	Centering Plug	-	-	-	Carbide Coat

  From: 12,276,481 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Wedge Stop Type

  OSG

  OSG PHOENIX series, wedge type[Work Material]General steel / heat-treated steel / stainless steel / cast iron

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	100 ～ 200	Quenched and tempered steel	-	50 ～ 63	14 ～ 25	Arbor	-	-	-	Carbide Coat

  From: 37,348,785 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Bore (for finishing) WBMF1000 Type

  SUMITOMO ELECTRIC HARDMETAL

  Unique high precision clamping method adopted. Good sharpness and great finished surface roughness. Use of Super ZX coating achieves superior wear resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	10 ～ 30	Quenched and tempered steel	Finishing	100 ～ 350	-	With handle	16 ～ 32	30 ～ 120	0.1~0.4	-

  From: 3,346,790 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Bore (rough machining short blade type), WBMR2000 Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Low resistance, sharp wave-shaped edge and high rake angle.・ Insert size with high cutting edge strength and cost-effective M class insert.・ A strong anti-rotation mechanism suppresses the insert movement during cutting.・ For large diameter sizes (ø40, ø50), the insert shape with the integrated main and auxiliary cutting edges is adopted to facilitate tool management.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	20 ～ 50	Quenched and tempered steel	Rough and medium rough processing	140 ～ 350	-	With handle	25 ～ 50.8	60 ～ 250	20～47	-

  From: 6,866,693 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill WEX2000E/EL Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	14 ～ 63	Quenched and tempered steel	Rough and medium rough processing	80 ～ 180	1 ～ 8	With handle	16 ～ 32	25 ～ 60	10	-

  From: 4,343,371 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Repeater, WRX2000E Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Realizes low resistance and low vibration machining by optimizing the cutting edge placement.・ The lead groove and special pocket shape achieves both smooth cutting chip discharge and high body rigidity.・ With a bottom blade support surface, bottom blade loss is reduced and high-reliability is achieved.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	20 ～ 40	Quenched and tempered steel	Rough and medium rough processing	120 ～ 160	4 ～ 16	With handle	20 ～ 42	40 ～ 50	18～36	-

  From: 10,195,975 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Repeater, WRX2000R Type

  SUMITOMO ELECTRIC HARDMETAL

  Optimizes cutting edge placement to realize low resistance and low vibration machining. Smooth chip discharge and high body rigidity are made possible by the lead groove and special pocket shape.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	40 ～ 50	Quenched and tempered steel	Rough and medium rough processing	-	10 ～ 16	Arbor	-	-	18～36	-

  From: 18,465,673 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Machining Application
blade diameter D(φ)
work material
Finish category
Overall length (L)(mm)
Number of flutes(sheet)
Mounting Method
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Maximum Cutting Depth (Ad)(mm)
Compatible Tip Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	KYOCERA	DIJET	SUMITOMO ELECTRIC HARDMETAL	SANDVIK	OSG	OSG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	OSG	OSG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	DIJET	DIJET	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	MISUMI	MISUMI	MISUMI	TUNGALOY	TUNGALOY	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL
Product SeriesDòng sản phẩm	CoroMill 590 Cutter	MFH Type High Feed Cutter MFH Mini End Mill	Mirror Radius End Mill (Ultra Hard Shank), RNM-S-C Shape	SEC-Wave Mill for WGX Type, WGX-R(S)	CoroMill 390 End Mill Threaded-Type Coupling R390-T	PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type	PHC BORE Phoenix Series High Feed Radius Cutter Bore Type	SEC-Wave Mill WEX2000F Type	SEC-Wave Multifunctional, Standard Type WMM2000E	SEC-Wave Repeater for WRX Type, WRX-R (S)	CERATIZIT MaxiMill 274 Milling Cutter	Phoenix Series Face Milling Cutter, Square, Bore Type	SEC-Wave Bore (rough machining long blade type), WBMR2000L Type	Used for SEC-Ace Mill, FPG Model FPG-R/L	Used for SEC-Wave Mill, WGX Model WGX-EW	Used for SEC-Wave Mill, WGC Model WGC(F)-RS	SEC-Wave Mill for WGX Type, WGXF-R(S)	SEC-Wave Mill for WGX Type, WGXM-R(S)	Aero Chipper ALX Model Bore Type Milling Cutter	Mirror Bore C Body, BNM-S-C Shape	End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C	CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting	CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Cylindrical Shank R300-A	CoroMill 331 Full Side Cutter, Machining Width: 6.0-12.0 mm 331.32	CoroMill 790 (Aluminum End Mill) Shoulder Cutting / End Mill Cylindrical Shank R790-A	Roughing Ball Cutter, End Mill Model	Finishing Ball Cutter, End Mill Model	Shoulder Milling Cutter, Arbor Mounting Model	Surface Processing Cutter DoPent TEN09	Bore Type Cutter DOREC TPQ	PRC Phoenix Series Round Cutter Screw-in Type	PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type	F2133 SS Small Diameter Cutter Series, Cyclone Cutter, Straight Shank	F3042B SL F3000 Series Positive Mill Neo Shell Type	F3000 Series, Positive Mill, Neo Straight Shank /F3042ASS	F3000 Series, Positive Mill, Neo Straight Shank /F3042BSS	PSE Phoenix Series Shoulder Milling Cutter PSE Screw-In Type	PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type	PHC Phoenix Series High Feed Radius Cutter Screw-in Type	Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Wedge Stop Type	SEC-Wave Bore (for finishing) WBMF1000 Type	SEC-Wave Bore (rough machining short blade type), WBMR2000 Type	SEC-Wave Mill WEX2000E/EL Type	SEC-Wave Repeater, WRX2000E Type	SEC-Wave Repeater, WRX2000R Type
From	30,615,236 VND	5,572,296 VND	6,992,594 VND	7,227,280 VND	10,338,223 VND	6,288,141 VND	9,704,373 VND	12,273,924 VND	5,573,262 VND	15,921,105 VND	9,116,718 VND	13,434,766 VND	10,004,960 VND	11,903,304 VND	8,075,535 VND	5,870,112 VND	9,983,912 VND	8,817,561 VND	19,264,758 VND	7,599,233 VND	12,409,955 VND	15,998,818 VND	8,350,941 VND	38,248,384 VND	21,371,070 VND	12,901,928 VND	9,317,676 VND	28,836,219 VND	24,111,051 VND	13,777,958 VND	9,331,393 VND	6,032,799 VND	23,781,194 VND	22,531,394 VND	5,184,741 VND	14,890,117 VND	7,603,605 VND	5,718,638 VND	12,276,481 VND	37,348,785 VND	3,346,790 VND	6,866,693 VND	4,343,371 VND	10,195,975 VND	18,465,673 VND
Days to ShipSố ngày giao hàng	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Machining Application	Plane / Side	-	Plane / Side / Groove / Vertical	Plane / Groove / Chamfer	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Vertical	Plane / Side / Groove	Plane / Side / Groove / Vertical	Plane / Side / Groove	Plane / Groove / Chamfer	Plane	Groove	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Side / Groove / Vertical	Groove	Plane / Side / Groove	Plane / Side / Groove	Plane	Groove	Side	Inclined Cuts	Inclined Cuts	Side / Groove	Plane	Side / Groove	Side / Groove / Vertical	Plane / Side / Groove / Vertical	Plane / Chamfer	Side / Groove	Side / Groove	Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Vertical	Plane / Side / Groove / Vertical	Plane	Groove	Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove
blade diameter D(φ)	63mm ～ 160mm	16 ～ 32	6 ～ 25	40 ～ 250	16 ～ 42	16 ～ 63	23.4 ～ 83.4	40 ～ 63	20 ～ 30	50 ～ 100	18.9 ～ 123.7	50 ～ 125	20 ～ 50	80 ～ 315	32 ～ 63	32 ～ 63	50 ～ 250	50 ～ 250	50 ～ 63	6 ～ 30	20 ～ 100	50 mm ～ 160 mm	10 mm ～ 32 mm	-	25 mm ～ 40 mm	16 ～ 25	10 ～ 16	125	125 ～ 160	-	10 ～ 30	10 ～ 88	63	50	20	32 ～ 63	16 ～ 40	13.2 ～ 46.4	13.2 ～ 28.2	100 ～ 200	10 ～ 30	20 ～ 50	14 ～ 63	20 ～ 40	40 ～ 50
work material	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel	Quenched and tempered steel
Finish category	Finishing	-	-	Rough and medium rough processing	Rough and medium rough processing / Finishing	-	-	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough to Finish Processing	-	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	-	-	Rough and medium rough processing / Finishing	Rough and medium rough processing / Finishing	Finishing	Finishing	Finishing	Rough and medium rough processing	Finishing	Rough and medium rough processing	-	-	-	-	-	-	-	-	-	-	-	-	Finishing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing
Overall length (L)(mm)	40 ～ 63	79 ～ 200	80 ～ 250	-	-	90 ～ 190	40 ～ 63	-	130 ～ 150	-	40$40.7 ～ 98.7	45 ～ 63	140 ～ 350	-	125	-	-	-	-	60 ～ 300	-	50 ～ 63	160 ～ 250	-	125 ～ 150	200 ～ 250	123 ～ 132	-	63	-	33 ～ 40	40 ～ 250	120	40	100	150 ～ 200	27 ～ 40	140 ～ 300	35 ～ 40	50 ～ 63	100 ～ 350	140 ～ 350	80 ～ 180	120 ～ 160	-
Number of flutes(sheet)	5 ～ 10	2 ～ 6	-	3 ～ 10	2 ～ 4	2 ～ 6	3 ～ 8	-	3 ～ 5	8 ～ 24	3 ～ 12	4 ～ 8	-	4 ～ 14	3 ～ 5	3 ～ 6	5 ～ 24	4 ～ 14	4 ～ 5	-	2 ～ 10	3 ～ 8	2	6 ～ 16	2 ～ 3	2	1	8	10 ～ 12	-	2 ～ 4	2 ～ 10	5	5	3	3 ～ 4	2 ～ 6	2 ～ 5	2 ～ 4	14 ～ 25	-	-	1 ～ 8	4 ～ 16	10 ～ 16
Mounting Method	Arbor	With handle	With handle	Arbor	Centering Plug	With handle	Arbor	Arbor	With handle	Arbor	With handle / Arbor	Arbor	With handle	Arbor	With handle	Arbor	Arbor	Arbor	Arbor	With handle	Centering Plug	Arbor	With handle	Arbor	With handle	With handle	With handle	Arbor	Arbor	-	Centering Plug	With handle / Arbor	With handle	Arbor	With handle	With handle	Centering Plug	With handle	Centering Plug	Arbor	With handle	With handle	With handle	With handle	Arbor
Shank diameter (d)(mm)	22 ～ 40	16 ～ 32	6 ～ 25	-	8 ～ 16	16 ～ 32	-	-	20 ～ 25	-	20 ～ 25	-	25 ～ 50.8	-	32	-	-	-	-	6 ～ 32	-	22 ～ 50.8	16 ～ 32	27 ～ 50	25 ～ 32	20 ～ 32	12 ～ 16	-	-	-	-	20 ～ 42	32	-	20	32	-	25 ～ 42	-	-	16 ～ 32	25 ～ 50.8	16 ～ 32	20 ～ 42	-
Underneck length (ℓ1)(mm)	-	20 ～ 120	30 ～ 170	-	25 ～ 45	25 ～ 90	-	-	35 ～ 50	-	25.7 ～ 40.7	-	60 ～ 250	-	40	-	-	-	-	-	23 ～ 70	-	-	-	-	27 ～ 40	-	-	63	-	-	50 ～ 120	45	-	30	45	-	40 ～ 180	-	-	30 ～ 120	60 ～ 250	25 ～ 60	40 ～ 50	-
Maximum Cutting Depth (Ad)(mm)	-	-	-	6	10	-	-	10	17～35	27 ～ 53	-	-	30～69	5.5	6	4 ～ 6	6	6	-	-	5.5 ～ 10	6 ～ 10	0.7 ～ 7	-	12	14.4 ～ 22.3	-	-	6.4	-	-	-	-	-	-	-	-	-	-	-	0.1~0.4	20～47	10	18～36	18～36
Compatible Tip Material	Carbide Coat	-	-	-	Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat	-	-	-	Carbide Coat	Carbide Coat	-	-	-	-	-	-	-	-	-	Carbide Coat	-	Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat	-	Carbide Coat	Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat / Cermet	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat	-	-	-	-	-

Loading...Tải…