Cutters / Indexable End Mills（Machining Application：Groove Page4）

• You can add up to 6 items per a category to the compare list. Compare

  

  PSE BORE Phoenix Series Shoulder Milling Cutter Bore Type

  OSG

  The employment of this high-precision insert achieves excellent bottom surface roughness. Due to the effect of the bottom notch, cutting chips are split into 2 during ramping and helical milling, which suppresses chip biting and entanglement, enabling smooth milling.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	-	-	-	3 ～ 11	-	-	-	-	-

  From: 8,192,583 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aero Chipper ALX Model Bore Type Milling Cutter

  DIJET

  [Features]· It is a tool with excellent abrasion resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	50 ～ 63	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	-	4 ～ 5	Arbor	-	-	-	-

  From: 19,264,758 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Side Chipper (Shank Type Mill) SIC Type - Medium Type

  DIJET

  [Features]· It is a tool with excellent abrasion resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	20 ～ 50	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	110 ～ 150	-	With handle	20 ～ 32	25 ～ 40	-	-

  From: 7,782,900 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Side Chipper (Bore Type Mill) SIC Type

  DIJET

  [Features]· It is a tool with excellent abrasion resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	63 ～ 100	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	-	-	Arbor	-	-	-	-

  From: 13,519,646 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Swing Ball SWB Type G-Body Series

  DIJET

  [Features]· Tool with excellent wear-resistance

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	40 ～ 50	-	-	200 ～ 250	-	With handle	50.8	100 ～ 150	-	-

  From: 19,440,458 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Swing Mill DSM-EC-BT Type

  DIJET

  [Features]· BT50 Shank· End cap replaceable type· Long Blade for Deep Cutting[Applications]· For Shoulder Milling

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	50 ～ 63	general steel / Cast Iron	-	266.8 ～ 331.8	20 ～ 26	With handle	-	-	66 ～ 127	-

  From: 46,926,664 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super End Chipper SEC Type - Standard Type, Medium-Long Type

  DIJET

  Multifunctional tool capable of three-dimensional cutting, including hole drilling and end milling, all performed with a single tool.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	16 ～ 40	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	130 ～ 160	-	With handle	16 ～ 32	50 ～ 70	-	-

  From: 7,814,375 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super Die Mate HDM Type Bore Type Mill / Regular Type

  DIJET

  [Features]· Supports materials from cast iron and general steel to stainless steel, titanium, and inconel

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	50 ～ 80	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	-	3 ～ 4	Arbor	-	-	-	-

  From: 12,936,768 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Backdraft DBD Type

  DIJET

  [Features]· Ideal for high-speed finishing of mold reference base

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	40 ～ 80	-	-	150	3 ～ 6	With handle / Arbor	32	-	-	-

  From: 8,961,803 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hepta Mill HEP type Bore type milling cutter

  DIJET

  [Features]· It is a tool with excellent abrasion resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	63 ～ 200	-	-	-	4 ～ 9	Arbor	-	-	-	-

  From: 16,403,358 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 329 Cutter

  SANDVIK

  Unique shape exhibits high performance

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	100mm	general steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Finishing	-	6	Arbor	22	-	15	Carbide Coat

  From: 31,471,823 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEW Type Head

  KYOCERA

  Be aware that chips or parts may scatter due to centrifugal force if accidentally rotating at the maximum rotation speed or higher.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	-	-	43 ～ 63	2 ～ 4	-	-	-	-	-

  From: 5,387,165 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEC Type Head

  KYOCERA

  [Features]·This product has a smooth machined surface with low cutting force and supports even more diverse machining with by adding a insert material and holder repertoire.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	16 ～ 32	-	-	43 ～ 63	2 ～ 4	-	-	-	-	-

  From: 5,387,165 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MECX Type Face Mill

  KYOCERA

  Shoulder grinding, groove cutting, and plane surface grinding are all possible.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	-	-	-	8 ～ 10	-	-	-	-	-

  From: 12,872,935 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEWH Type End Mill (With Coolant Holes at Tip Blade)

  KYOCERA

  Holder design makes use of the MEW type characteristics to achieve a good machining surface and stable machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	25 ～ 50	-	-	120 ～ 160	6 ～ 10	-	25 ～ 42	-	-	-

  From: 13,309,653 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutter for Heavy Cutting, Model MSR

  KYOCERA

  The seizing prevention agent (MP-1) should be applied in a thin layer to the taper and threading of the clamp screw when fixing an insert.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	-	-	-	4 ～ 24	-	-	-	-	-

  From: 22,674,291 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DMC-SX Type End Mill

  KYOCERA

  [Features]·This product is capable of shoulder milling, grooving, and face milling.S (mm): 14.0Wrench: FT-15Rake angle (°) A.R.: +3°

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	16 ～ 40	-	-	90 ～ 250	1 ～ 2	-	16 ～ 32	-	-	-

  From: 3,439,248 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DMC-H Type End Mill (High Rake Angle Type)

  KYOCERA

  [Features]·This product is capable of shoulder milling, grooving, and face milling.S (mm): 14.0Wrench: FT-15

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	16 ～ 40	-	-	90 ～ 150	1 ～ 2	-	16 ～ 32	-	-	-

  From: 3,602,722 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slot Mill SLT Type Tip: Self-Restraint Type MSTA Type (Inch Specifications)

  KYOCERA

  [Features]·The MSTA slot mill is a slot mill with a simple, self-captured structure that simply inserts an insert.·The insert can be installed and removed securely and quickly with a dedicated wrench.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	63.5 ～ 152.4	general steel / Quenched and tempered steel / Stainless Steel	-	-	4 ～ 14	-	-	-	-	Carbide Coat

  From: 17,467,321 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slot Mill Vertical Installation: LN Type Tip without Boss

  KYOCERA

  This slot mill has two keyways to allow use with 2 or more combined.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	-	-	-	8 ～ 16	-	-	-	-	-

  From: 21,449,122 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slot Mill Horizontal Installation Specification with Boss

  KYOCERA

  This slot mill has two keyways to allow use with 2 or more combined.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	-	-	-	6 ～ 10	-	-	-	-	-

  From: 45,135,339 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MGI Type Grooving End Mill

  KYOCERA

  [Features]·A grooving end mill for M/C (for GVR inserts).Overall length (mm): 100, 110, 120Shank diameter (d) (mm): 20, 25

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	-	-	100 ～ 120	-	-	20 ～ 25	-	-	-

  From: 4,725,794 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSEL SS Phoenix Series Roughing End Mill Straight Shank Type

  OSG

  [Specifications]・ Shape: Cutter・ Indexable end mill[Applications]Plane, side, groove

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	25 ～ 50	-	-	125 ～ 144	2 ～ 4	With handle	25 ～ 42	50 ～ 64	-	-

  From: 21,766,321 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSEL BORE Phoenix Series Roughing End Mill Bore Type

  OSG

  [Specifications]· Shape: Cutter· Blade Tip Replacement Type End Mill[Applications] Flat surfaces, side surfaces, grooves

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	50 ～ 80	-	-	74 ～ 88	3 ～ 4	Arbor	-	-	-	-

  From: 32,722,673 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  コロミル３９０カッター/エンドミルおよび肩削りカッター

  SANDVIK

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	36 mm	general steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite	Rough and medium rough processing	-	3	Centering Plug	-	75	10	Carbide Coat / No Carbide Coat / Cermet

  From: 16,344,180 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Swing Ball SWB Type Long Shank Type / Combination Type

  DIJET

  [Specifications]· Mounting Method: Type with Handle· Type: Combination Shank[Applications] Curved-surface Machining

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	40 ～ 50	-	-	220 ～ 350	-	With handle	50.8	170	-	-

  From: 14,806,112 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mirror Bore C Body, BNM-T-C Shape

  DIJET

  [Features]· Suppresses chattering and enables high-precision/high-speed machining and stable deep engraving· Uses carbide as the shank material, for tool rigidity comparable to that of solid ball end mills.· Twice or more the tool service life of steel shank types.· Also supports shrink-fit holders

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	6 ～ 20	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	80 ～ 191	-	With handle	10 ～ 25	15 ～ 36	-	-

  From: 8,411,995 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mirror Bore C Body, BNMU Shape

  DIJET

  [Features]· An under-neck type with shank diameter 1 to 2 mm less than blade diameter.· The neck length can be adjusted to enable initial cost reductions.· Suppresses chattering and enables high-precision/high-speed machining and stable deep engraving· Uses carbide as the shank material, for tool rigidity comparable to that of solid ball end mills.· Twice or more the tool service life of steel shank types.· Also supports shrink-fit holders

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	16 ～ 20	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	220 ～ 270	-	With handle	15 ～ 18	-	-	-

  From: 19,041,646 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aero Chipper ALX Model Shank Type Milling Cutter

  DIJET

  [Specifications]· Mounting Method: Type with Handle· Compatible Tip: XOGT1605○○PD○R· Work materials: General steel, tempered steel, high hardness steel, stainless steel, cast iron[Applications] Side Surfaces / Grooves / Vertical

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	20 ～ 40	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	110 ～ 170	1 ～ 3	With handle	20 ～ 32	35 ～ 80	-	-

  From: 9,559,425 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super End Chipper SEC Type - Long, Extra Long, MT Shank, Weldon Shank Type

  DIJET

  [Features]· One unit accomplishes all kinds of tasks incredibly well.· Multifunctional tool capable of three-dimensional cutting, including hole drilling and end milling, all performed with a single tool.· Uses a 3D tip for excellent cutting performance and chip disposal, allowing high efficiency machining to be performed.· Highly reliable cutter geometry and new JC5015 and JC5040 material combination makes it difficult to break, providing a long life

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	16 ～ 50	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	180 ～ 350	-	With handle	16 ～ 42	40 ～ 90	-	-

  From: 8,579,326 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Side Chipper (Shank Type Mill) SIC Type - Long Type

  DIJET

  [Specifications]· Mounting Method: Type with Handle· Work materials: General steel, tempered steel, high hardness steel, stainless steel, cast iron, titanium, copper[Applications] Flat Surfaces / Side Surfaces / Grooves

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	16 ～ 50	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	150 ～ 250	-	With handle	16 ～ 42	25 ～ 65	-	-

  From: 9,439,501 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mirror Radius End Mill (Ultra Hard Shank), RNM-S-C Shape

  DIJET

  [Specifications]· Mounting Method: Type with Handle· Work materials: General steel, tempered steel, high hardness steel, stainless steel, cast iron[Applications] Flat Surfaces / Side Surfaces / Grooves / Vertical

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	6 ～ 25	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	80 ～ 250	-	With handle	6 ～ 25	30 ～ 170	-	-

  From: 6,992,594 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C

  SANDVIK

  Shoulder face milling cutter with amazing performance● Wide range of applicationsCapable of face milling, shoulder milling, grooving and contouringImproved proximity with the introduction of an oversized cutter● Amazing productivityAchieves high cutting conditions with a highly rigid bodyHigh insert mounting rigidity due to flat insert seat● Outstanding machining accuracyLow resistance and high accuracy due to sharp tipBoth the bottom and sides are processed with high precision●GC4330, GC4340CVD grade for steel milling, ideal for versatile CoroMill® 490The Inveio coating provides excellent abrasion resistance and long tool lifespan

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	20 ～ 100	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Rough and medium rough processing / Finishing	-	2 ～ 10	Centering Plug	-	23 ～ 70	5.5 ～ 10	-

  From: 12,409,955 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 331 Full Side Cutter, Machining Width: 12.0-26.5 mm 331.32

  SANDVIK

  High precision multi-purpose side cutter.[Features]·Diameter 40-315mm·Shipped preset to ±0.01 mm edge width tolerance·Radial run-out accuracy ±0.02 mm·wide pocket·Strong clamping by wedge·Serration method·Adjustment range 2-3mm·Unique spring-loaded mechanism for smooth adjustment and slip prevention

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Finishing	-	6 ～ 10	Arbor	27 ～ 40	-	-	Carbide Coat

  From: 38,248,384 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 331 Full Side Cutter, Machining Width: 6.0-12.0 mm 331.32

  SANDVIK

  Sandvik, cutter / indexable end mill, CoroMill 331, full side cutter, processing width of 6.0 to 12.0 mm, 331.32.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Finishing	-	6 ～ 16	Arbor	27 ～ 50	-	-	Carbide Coat

  From: 38,248,384 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 390 End Mill Threaded-Type Coupling R390-T

  SANDVIK

  [Features]Rivals the performance of solid end millsHigh precisionNo miss-matchesShoulder cuttingGroovingProfilingHelical machiningLappingCan be used for all types of machiningThreaded-type coupling

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	16 ～ 42	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Rough and medium rough processing / Finishing	-	2 ～ 4	Centering Plug	8 ～ 16	25 ～ 45	10	Carbide Coat

  From: 10,338,223 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 490 Shoulder Cutting Face Milling HSK 490-HA

  SANDVIK

  Shoulder face milling cutter with amazing performance● Wide range of applicationsCapable of face milling, shoulder milling, grooving and contouringImproved proximity with the introduction of an oversized cutter● Amazing productivityAchieves high cutting conditions with a highly rigid bodyHigh insert mounting rigidity due to flat insert seat● Outstanding machining accuracyLow resistance and high accuracy due to sharp tipBoth the bottom and sides are processed with high precision●GC4330, GC4340CVD grade for steel milling, ideal for versatile CoroMill® 490The Inveio coating provides excellent abrasion resistance and long tool lifespan

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	20 mm ～ 80 mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Rough and medium rough processing / Finishing	-	2 ～ 8	Centering Plug	48	40 ～ 58	5.5	Carbide Coat

  From: 11,254,538 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 327 Coromant Capto Short, Without Gripper Groove C-391.327

  SANDVIK

  Sharp cutting edges for low cutting forces, high quality burr-free grooves, wide range of shank lengths and diameters

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	general steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Rough and medium rough processing	-	-	Centering Plug	-	-	-	Diamond (PCD)

  From: 8,922,456 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 327 ER For Rotary Tools, Integrated Collet Type 392.ER327

  SANDVIK

  Sharp cutting edges for low cutting forces, high quality burr-free grooves, wide range of shank lengths and diameters

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	general steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Finishing	-	-	Centering Plug	-	-	-	-

  From: 11,257,710 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill R216F Ball End Mill For Finishing, Steel & Carbide Cylindrical Shank, R216F-A

  SANDVIK

  High-productivity, high-precision finishing ball end mill that achieves excellent machined surface roughness

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	8 ～ 30/32	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Rough and medium rough processing	83 ～ 240	-	With handle	12 ～ 32	19 ～ 54	1.2 ～ 4.8	Carbide Coat

  From: 10,024,203 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill R216 Ball End Mill Threaded Coupling R216-T

  SANDVIK

  Ball end mill for semi-finishing profiling that achieves high productivity and high chip evacuation

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	10 mm ～ 32 mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Finishing	-	2	Centering Plug	-	18 ～ -	8.6 ～ 28.6	Carbide Coat

  From: 11,575,574 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill R216 Ball End Mill Coromant Capto R216-C

  SANDVIK

  Ball end mill for semi-finishing profiling that achieves high productivity and high chip evacuation

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	30 ～ 40	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Finishing	-	-	-	-	50 ～ 95	28.3 ～ 44.6	Carbide Coat

  From: 21,850,758 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional Tool CoroPlex MT, For Turning & Milling On Multi-Task Machines

  SANDVIK

  1 milling tool and 4 turning tools in oneReduced tool change time

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	32 mm ～ 40 mm	general steel / Cast Iron / Titanium	Finishing	130 ～ 165	2	Centering Plug	-	-	10	-

  From: 27,213,300 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter, BMR03 Series

  KABUSYUUKOUGU

  [BMR03 Series]A milling machine cutter with a handle for profiling.2-flute type.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	10 ～ 20	Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	200 ～ 250	2	With handle	20 ～ 40	100 ～ 150	20 ～ 40	-

  From: 3,544,843 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter, BMR04 Series

  KABUSYUUKOUGU

  [BMR04 Series]A milling machine cutter with a handle for side, groove, and vertical profiling.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	12 ～ 32	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel	-	125 ～ 250	-	With handle	12 ～ 32	35 ～ 130	-	-

  From: 5,379,136 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Machining Application
blade diameter D(φ)
work material
Finish category
Overall length (L)(mm)
Number of flutes(sheet)
Mounting Method
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Maximum Cutting Depth (Ad)(mm)
Compatible Tip Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	SANDVIK	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	OSG	OSG	SANDVIK	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	KABUSYUUKOUGU	KABUSYUUKOUGU
Product SeriesDòng sản phẩm	PSE BORE Phoenix Series Shoulder Milling Cutter Bore Type	Aero Chipper ALX Model Bore Type Milling Cutter	Side Chipper (Shank Type Mill) SIC Type - Medium Type	Side Chipper (Bore Type Mill) SIC Type	Swing Ball SWB Type G-Body Series	Swing Mill DSM-EC-BT Type	Super End Chipper SEC Type - Standard Type, Medium-Long Type	Super Die Mate HDM Type Bore Type Mill / Regular Type	Backdraft DBD Type	Hepta Mill HEP type Bore type milling cutter	CoroMill 329 Cutter	MEW Type Head	MEC Type Head	MECX Type Face Mill	MEWH Type End Mill (With Coolant Holes at Tip Blade)	Cutter for Heavy Cutting, Model MSR	DMC-SX Type End Mill	DMC-H Type End Mill (High Rake Angle Type)	Slot Mill SLT Type Tip: Self-Restraint Type MSTA Type (Inch Specifications)	Slot Mill Vertical Installation: LN Type Tip without Boss	Slot Mill Horizontal Installation Specification with Boss	MGI Type Grooving End Mill	PSEL SS Phoenix Series Roughing End Mill Straight Shank Type	PSEL BORE Phoenix Series Roughing End Mill Bore Type	コロミル３９０カッター/エンドミルおよび肩削りカッター	Swing Ball SWB Type Long Shank Type / Combination Type	Mirror Bore C Body, BNM-T-C Shape	Mirror Bore C Body, BNMU Shape	Aero Chipper ALX Model Shank Type Milling Cutter	Super End Chipper SEC Type - Long, Extra Long, MT Shank, Weldon Shank Type	Side Chipper (Shank Type Mill) SIC Type - Long Type	Mirror Radius End Mill (Ultra Hard Shank), RNM-S-C Shape	End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C	CoroMill 331 Full Side Cutter, Machining Width: 12.0-26.5 mm 331.32	CoroMill 331 Full Side Cutter, Machining Width: 6.0-12.0 mm 331.32	CoroMill 390 End Mill Threaded-Type Coupling R390-T	CoroMill 490 Shoulder Cutting Face Milling HSK 490-HA	CoroMill 327 Coromant Capto Short, Without Gripper Groove C-391.327	CoroMill 327 ER For Rotary Tools, Integrated Collet Type 392.ER327	CoroMill R216F Ball End Mill For Finishing, Steel & Carbide Cylindrical Shank, R216F-A	CoroMill R216 Ball End Mill Threaded Coupling R216-T	CoroMill R216 Ball End Mill Coromant Capto R216-C	Multi-Functional Tool CoroPlex MT, For Turning & Milling On Multi-Task Machines	Milling Cutter, BMR03 Series	Milling Cutter, BMR04 Series
From	8,192,583 VND	19,264,758 VND	7,782,900 VND	13,519,646 VND	19,440,458 VND	46,926,664 VND	7,814,375 VND	12,936,768 VND	8,961,803 VND	16,403,358 VND	31,471,823 VND	5,387,165 VND	5,387,165 VND	12,872,935 VND	13,309,653 VND	22,674,291 VND	3,439,248 VND	3,602,722 VND	17,467,321 VND	21,449,122 VND	45,135,339 VND	4,725,794 VND	21,766,321 VND	32,722,673 VND	16,344,180 VND	14,806,112 VND	8,411,995 VND	19,041,646 VND	9,559,425 VND	8,579,326 VND	9,439,501 VND	6,992,594 VND	12,409,955 VND	38,248,384 VND	38,248,384 VND	10,338,223 VND	11,254,538 VND	8,922,456 VND	11,257,710 VND	10,024,203 VND	11,575,574 VND	21,850,758 VND	27,213,300 VND	3,544,843 VND	5,379,136 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more
Machining Application	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove	Groove
blade diameter D(φ)	-	50 ～ 63	20 ～ 50	63 ～ 100	40 ～ 50	50 ～ 63	16 ～ 40	50 ～ 80	40 ～ 80	63 ～ 200	100mm	-	16 ～ 32	-	25 ～ 50	-	16 ～ 40	16 ～ 40	63.5 ～ 152.4	-	-	-	25 ～ 50	50 ～ 80	36 mm	40 ～ 50	6 ～ 20	16 ～ 20	20 ～ 40	16 ～ 50	16 ～ 50	6 ～ 25	20 ～ 100	-	-	16 ～ 42	20 mm ～ 80 mm	-	-	8 ～ 30/32	10 mm ～ 32 mm	30 ～ 40	32 mm ～ 40 mm	10 ～ 20	12 ～ 32
work material	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	general steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	-	-	general steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	-	-	-	-	-	-	-	general steel / Quenched and tempered steel / Stainless Steel	-	-	-	-	-	general steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	general steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Cast Iron / Titanium	Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel
Finish category	-	-	-	-	-	-	-	-	-	-	Finishing	-	-	-	-	-	-	-	-	-	-	-	-	-	Rough and medium rough processing	-	-	-	-	-	-	-	Rough and medium rough processing / Finishing	Finishing	Finishing	Rough and medium rough processing / Finishing	Rough and medium rough processing / Finishing	Rough and medium rough processing	Finishing	Rough and medium rough processing	Finishing	Finishing	Finishing	-	-
Overall length (L)(mm)	-	-	110 ～ 150	-	200 ～ 250	266.8 ～ 331.8	130 ～ 160	-	150	-	-	43 ～ 63	43 ～ 63	-	120 ～ 160	-	90 ～ 250	90 ～ 150	-	-	-	100 ～ 120	125 ～ 144	74 ～ 88	-	220 ～ 350	80 ～ 191	220 ～ 270	110 ～ 170	180 ～ 350	150 ～ 250	80 ～ 250	-	-	-	-	-	-	-	83 ～ 240	-	-	130 ～ 165	200 ～ 250	125 ～ 250
Number of flutes(sheet)	3 ～ 11	4 ～ 5	-	-	-	20 ～ 26	-	3 ～ 4	3 ～ 6	4 ～ 9	6	2 ～ 4	2 ～ 4	8 ～ 10	6 ～ 10	4 ～ 24	1 ～ 2	1 ～ 2	4 ～ 14	8 ～ 16	6 ～ 10	-	2 ～ 4	3 ～ 4	3	-	-	-	1 ～ 3	-	-	-	2 ～ 10	6 ～ 10	6 ～ 16	2 ～ 4	2 ～ 8	-	-	-	2	-	2	2	-
Mounting Method	-	Arbor	With handle	Arbor	With handle	With handle	With handle	Arbor	With handle / Arbor	Arbor	Arbor	-	-	-	-	-	-	-	-	-	-	-	With handle	Arbor	Centering Plug	With handle	With handle	With handle	With handle	With handle	With handle	With handle	Centering Plug	Arbor	Arbor	Centering Plug	Centering Plug	Centering Plug	Centering Plug	With handle	Centering Plug	-	Centering Plug	With handle	With handle
Shank diameter (d)(mm)	-	-	20 ～ 32	-	50.8	-	16 ～ 32	-	32	-	22	-	-	-	25 ～ 42	-	16 ～ 32	16 ～ 32	-	-	-	20 ～ 25	25 ～ 42	-	-	50.8	10 ～ 25	15 ～ 18	20 ～ 32	16 ～ 42	16 ～ 42	6 ～ 25	-	27 ～ 40	27 ～ 50	8 ～ 16	48	-	-	12 ～ 32	-	-	-	20 ～ 40	12 ～ 32
Underneck length (ℓ1)(mm)	-	-	25 ～ 40	-	100 ～ 150	-	50 ～ 70	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	50 ～ 64	-	75	170	15 ～ 36	-	35 ～ 80	40 ～ 90	25 ～ 65	30 ～ 170	23 ～ 70	-	-	25 ～ 45	40 ～ 58	-	-	19 ～ 54	18 ～ -	50 ～ 95	-	100 ～ 150	35 ～ 130
Maximum Cutting Depth (Ad)(mm)	-	-	-	-	-	66 ～ 127	-	-	-	-	15	-	-	-	-	-	-	-	-	-	-	-	-	-	10	-	-	-	-	-	-	-	5.5 ～ 10	-	-	10	5.5	-	-	1.2 ～ 4.8	8.6 ～ 28.6	28.3 ～ 44.6	10	20 ～ 40	-
Compatible Tip Material	-	-	-	-	-	-	-	-	-	-	Carbide Coat	-	-	-	-	-	-	-	Carbide Coat	-	-	-	-	-	Carbide Coat / No Carbide Coat / Cermet	-	-	-	-	-	-	-	-	Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat	Diamond (PCD)	-	Carbide Coat	Carbide Coat	Carbide Coat	-	-	-

Loading...Tải…