(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
208 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
From: 26,023,926 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Full Cut Mill (FCR type Standard)
BIG DAISHOWA SEIKI
[Features]· Dual face contact integrated type provides even higher rigidity. Tip with enhanced rigidity, allowing tough and stable ramping
From: 6,601,296 VND |
---|
Days to Ship: Số ngày giao hàng: 12 Day(s) |
You can add up to 6 items per a category to the compare list.
KYOCERA
[Features]·The pentagon (10 corners) insert reduces the cost per corner.·The helical cutting-edge design and double-edge position improve low cutting edge and wear resistance.
From: 10,830,986 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KYOCERA
Be aware that chips or parts may scatter due to centrifugal force if accidentally rotating at the maximum rotation speed or higher.
From: 5,387,165 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KYOCERA
MFWN90 type face mill[Features]·Good sharpness with low resistance·Resistant to chatter·Thick wall design with excellent chipping resistance, neutral insert·Long life with new technology MEGACOAT NANO·A lineup of 5 chipbreakers for different machining applications
From: 10,839,052 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Side Cutter, Milling Cutter, Front Face Milling Cutter
SANDVIK
A versatile high-feed milling[Features]It is a tool with a concept of highly productive roughing to be used when a high cutting chip discharge rate is a top priorityThe 10° entering angle achieves face milling at a very high feed rate
From: 21,477,646 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Side Chipper (Shank Type Mill) SIC Type - Long Type
DIJET
[Specifications]· Mounting Method: Type with Handle· Work materials: General steel, tempered steel, high hardness steel, stainless steel, cast iron, titanium, copper[Applications] Flat Surfaces / Side Surfaces / Grooves
From: 9,439,501 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FUJIGEN
Ideal for use in low-rigidity machines such as tapping centers.[Features]· Small diameter shank lineup allows use for small machining.· Unique negative/positive method prevents chatter even with thin objects (can machining, etc.)
From: 10,626,988 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Wave Mill WEX2000E/EL Type
SUMITOMO ELECTRIC HARDMETAL
[Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.
From: 4,343,371 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Wave Multifunctional, Standard Type WMM2000E
SUMITOMO ELECTRIC HARDMETAL
[Features]・ Enables shoulder milling, grooving, and drilling with a single WMM type.・ Ideal for high efficiency ramping, helical drilling, and pocket machining.・ Use of a wave mill insert achieves both cutting performance and cutting edge strength.・ Reduced cutting force realizes the same cutting chip discharge amount as conventional products with a lower required power.・ One type of insert enables easy tool management.・ Ideal for cutting stainless steel, etc.
From: 5,573,262 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Full Cut Mill FCM Type Straight Shank Type
BIG DAISHOWA SEIKI
[Features]· A highly versatile straight shank type. Combination with the MEGA Double Power Chuck enables comfortable work.
From: 7,338,820 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SANDVIK
A light-cutting face milling cuter suitable for high-speed finishing[Features]The tool is designed with a serrated-tip interface for increased stability and reduced run-out
From: 30,615,236 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Phoenix Face Milling Cutter, 4-Corner Shoulder Mill Cutting Bore Type
OSG
[Features]· OSG Phoenix Series· A straight shank type.
From: 13,359,813 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Screw Lock Type
OSG
An octagonal and bore-type face mill. Economical through the use of double sides of octagonal inserts, totaling 16 corners.
From: 13,925,582 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Used for SEC-Wave Mill, WFX Model WFX-E
SUMITOMO ELECTRIC HARDMETAL
A screw mount type cutter capable of using on 4 corners.Ideal blade shape provides favorable wall accuracy.[Features]・ The insert shape optimized for corner cutting and the high-precision body achieve excellent machining quality.
From: 9,135,657 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
Used for SEC-Wave Mill, WGX Model WGX-EW
SUMITOMO ELECTRIC HARDMETAL
[Features]·This product provides an excellent finished surface by improving the runout accuracy of the cutting edge and by using a unique wiper edge shape.
From: 8,075,535 VND |
---|
Days to Ship: Số ngày giao hàng: 9 Day(s) |
You can add up to 6 items per a category to the compare list.
SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius less than 3.2
SUMITOMO ELECTRIC HARDMETAL
High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
From: 15,539,469 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Wave Multifunctional, Long Type WMM2000EL
SUMITOMO ELECTRIC HARDMETAL
Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.
From: 6,230,699 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 8,961,803 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KYOCERA
Shoulder grinding, groove cutting, and plane surface grinding are all possible.
From: 9,013,691 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 17,328,952 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
From: 19,078,384 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Kyocera High Feed Cutter MFH Type End Mill
KYOCERA
【特長】・MFH型:高能率・高送りカッタ。3次元凸型切刃でビビりに強い。高い切りくず排出性と加工時間の短縮を実現。【用途】・高送りエンドミル・平面削り・斜め沈み加工・ヘリカル加工・バーチカル加工【商品仕様】・幅(mm):60・奥行(mm):360・高さ(mm):60・適合チップ:SOMT1004・スクリュークランプ方式・ロングシャンク・JANコード:4960664717446・トラスココード:825-0122
From: 7,618,359 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Kyocera High Feed Cutter MRX Type Face Mill
KYOCERA
【特長】・MRX型:低抵抗設計で良好な切削性、高能率加工を実現するラジアスカッタ【用途】・ラジアスフェースミル・R削り・倣い・掘込み・平面削り【商品仕様】・適合チップ:RPMT1605/RPGT1605・スクリュークランプ方式・インロー部インチ仕様・JANコード:4960664695379・トラスココード:550-6778
From: 11,623,766 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Plane Milling Cutter, End Mill Model
MISUMI
[Features]·Indexable end mill type holder·High-precision cutter for face milling, with a cutting edge angle of 45°·Outer diameter: ⌀32,⌀40,⌀50·Pitch: 3-flute, 4-flute·Compatible tip: SEET13T3, SEMT13T3M
From: 8,768,589 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
PDR Phoenix Series High Efficiency Radius Cutter With Handle Type
OSG
A high-feed radius cutter series that uses a variable negative-chamfered insert that prevents chipping and reduces cutting force.
From: 8,447,728 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Sumi Boron BN Finish Mill EASY, for FMU-E Type FMU-ER
SUMITOMO ELECTRIC HARDMETAL
[Features]·A SUMIBORON BN finish mill for high speed finishing.cutting diameter D (⌀): 37, 47, 60Number of edges (Pcs.): 2, 3, 4Weight (kg): 1, 1.2
From: 16,832,900 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Features]·This BN finish mill provides ultra-high speed milling of gray cast iron.Work material: Cast IronMaximum cutting depth (Ad) (mm): 0.5
From: 25,223,580 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Features]·An ace mill for general cutting (slab milling / grooving / chamfering) of steel, cast iron, and stainless steel.cutting diameter D (⌀): 80, 105, 125, 157, 200Maximum cutting depth (Ad) (mm): 9.5
From: 11,903,304 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Wave Radius Mill WRCX Type WRCX10000E
SUMITOMO ELECTRIC HARDMETAL
Special surface processing dramatically improves life and reliability with the highly durable body. Uses a vibration-proof blade type design that is resistant to chatter.
From: 5,954,898 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Used for SEC-Ace Mill, FPG Model FPG-R/L
SUMITOMO ELECTRIC HARDMETAL
[Features]·Right-handed or left-handed can be selected.·An ace mill for general purposes, slab milling, grooving, and chamfering of difficult-to-cut materials.Maximum cutting depth (Ad) (mm): 5.5
From: 11,903,304 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Used for SEC-Wave Mill, WGC Model WGC(F)-RS
SUMITOMO ELECTRIC HARDMETAL
[Features]·The high precision of the body and inserts allows for high-quality machining.·This product has high sharpness and strength, and a wide variety of insert items can meet a wide range of needs.
From: 5,870,112 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Wave Mill for WGX Type, WGXM-R(S)
SUMITOMO ELECTRIC HARDMETAL
Achieves low resistance with a dedicated chip breaker. For general cutting of steel and cast iron.[Features]・ The high rake chip breaker designed for the WGX type achieves low resistance.・ Achieves an excellent finished surface with improved blade runout accuracy and a unique sweeping blade shape.・ Addition of chamfer suppresses burrs and edge chips.
From: 8,817,561 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Wave Mill WAX3000E/EL Type, for chip blade tip nose radius greater than 4.0
SUMITOMO ELECTRIC HARDMETAL
High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
From: 9,135,657 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius greater than 4.0
SUMITOMO ELECTRIC HARDMETAL
High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
From: 15,539,469 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SEC-Wave Mill WAX4000 Type, for chip blade tip nose radius less than 3.2
SUMITOMO ELECTRIC HARDMETAL
High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
From: 14,839,738 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Full Cut Mill (FCM type Standard)
BIG DAISHOWA SEIKI
[Features]· It is comparable to a sharp and tough solid end mill. Throw-away end mill cutter. Low resistance and high efficiency cutter dedicated for lateral feed processing.
From: 6,601,296 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Side Chipper (Bore Type Mill) SIC Type
DIJET
[Features]· It is a tool with excellent abrasion resistance.
From: 13,519,646 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
New Back-and-Forth Cutter PFC Type
DIJET
[Features]· With Coolant Hole[Applications]· For finishing, reciprocation and vertical wall processing
From: 17,372,791 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MSRS15 Type Holder (mm Specification)
KYOCERA
[Features]·This product is capable of face milling.·The notched insert reduces and disperses cutting force during compression, and suppresses chattering, enabling high feed.
From: 13,893,910 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KYOCERA
Be aware that chips or parts may scatter due to centrifugal force if accidentally rotating at the maximum rotation speed or higher.
From: 9,818,077 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KYOCERA
Shoulder grinding, groove cutting, and plane surface grinding are all possible.
From: 4,130,914 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KYOCERA
[Features]·The low cutting force and high strength are suitable for compact machines.·The general-purpose JT chip breaker and low-cutting force JS chip breaker cover a wide range of cutting areas.
From: 4,130,914 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
KYOCERA
【特長】・MFK型:高能率多刃・鋳鉄加工用カッタ。超多刃仕様で鋳鉄の高能率加工を実現。安定性と高い経済性を両立する両面10コーナ仕様チップを採用。【用途】・フェースミル(鋳鉄用)・平面削り・高能率加工【商品仕様】・適合チップ:PNMG1106・ウェッジクランプ方式・エクストラクロスピッチ・インロー部:インチ仕様・JANコード:4960664732692・トラスココード:825-0143
From: 23,639,594 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Surface Processing Cutter DoPent TEN09
TUNGALOY
Screw clamp surface processing cutter[Features]· Cutting edge angle: 70°· Uses pentagonal double-sided inserts
From: 24,941,974 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
Machining Application |
blade diameter D(φ) |
work material |
Finish category |
Overall length (L)(mm) |
Number of flutes(sheet) |
Mounting Method |
Shank diameter (d)(mm) |
Underneck length (ℓ1)(mm) |
Maximum Cutting Depth (Ad)(mm) |
Compatible Tip Material |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | SANDVIK | BIG DAISHOWA SEIKI | KYOCERA | KYOCERA | KYOCERA | SANDVIK | DIJET | FUJIGEN | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | BIG DAISHOWA SEIKI | SANDVIK | OSG | OSG | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | DIJET | KYOCERA | SANDVIK | SANDVIK | KYOCERA | KYOCERA | MISUMI | OSG | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | BIG DAISHOWA SEIKI | DIJET | DIJET | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | TUNGALOY |
Product SeriesDòng sản phẩm | Phoenix Face Milling Cutter, 4-Corner Shoulder Mill Cutting Bore Type | Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Screw Lock Type | SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius less than 3.2 | PDR Phoenix Series High Efficiency Radius Cutter With Handle Type | SEC-Wave Mill WAX3000E/EL Type, for chip blade tip nose radius greater than 4.0 | SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius greater than 4.0 | SEC-Wave Mill WAX4000 Type, for chip blade tip nose radius less than 3.2 | ||||||||||||||||||||||||||||||||||||||
From | 26,023,926 VND | 6,601,296 VND | 10,830,986 VND | 5,387,165 VND | 10,839,052 VND | 21,477,646 VND | 9,439,501 VND | 10,626,988 VND | 4,343,371 VND | 5,573,262 VND | 7,338,820 VND | 30,615,236 VND | 13,359,813 VND | 13,925,582 VND | 9,135,657 VND | 8,075,535 VND | 15,539,469 VND | 6,230,699 VND | 8,961,803 VND | 9,013,691 VND | 17,328,952 VND | 19,078,384 VND | 7,618,359 VND | 11,623,766 VND | 8,768,589 VND | 8,447,728 VND | 16,832,900 VND | 25,223,580 VND | 11,903,304 VND | 5,954,898 VND | 11,903,304 VND | 5,870,112 VND | 8,817,561 VND | 9,135,657 VND | 15,539,469 VND | 14,839,738 VND | 6,601,296 VND | 13,519,646 VND | 17,372,791 VND | 13,893,910 VND | 9,818,077 VND | 4,130,914 VND | 4,130,914 VND | 23,639,594 VND | 24,941,974 VND |
Days to ShipSố ngày giao hàng | 6 Day(s) or more | 12 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 9 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
Machining Application | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane | Plane |
blade diameter D(φ) | 80mm ~ 160mm | 16 ~ 32 | - | 16 ~ 50 | - | 52mm | 16 ~ 50 | 60 ~ 80 | 14 ~ 63 | 20 ~ 30 | 40 ~ 50 | 63mm ~ 160mm | 50 ~ 80 | 50 ~ 125 | 40 ~ 80 | 32 ~ 63 | 50 ~ 125 | 20 ~ 30 | 40 ~ 80 | - | 62.5mm ~ 268.8mm | 69.7mm ~ 166.7mm | 32 ~ 40 | 80 | 32 | 20 ~ 105 | 37 ~ 60 | 80 ~ 160 | 80 ~ 200 | 25 ~ 32 | 80 ~ 315 | 32 ~ 63 | 50 ~ 250 | 20 ~ 40 | 50 ~ 125 | 50 ~ 125 | 16 ~ 50 | 63 ~ 100 | 50 ~ 63 | - | - | 10 ~ 50 | 8 ~ 33 | 80 ~ 250 | 125 ~ 160 |
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin | - | - | - | - | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper | general steel / Stainless Steel / Aluminum / Resin | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | - | Quenched and tempered steel / high hardness steel / Cast Iron / Aluminum / Copper | - | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | Aluminum | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | - | - | general steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / high hardness steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | general steel / high hardness steel / Cast Iron | Cast Iron | Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | Aluminum | Aluminum | Aluminum | - | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium / Copper | general steel / Cast Iron | - | - | - | - | Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper |
Finish category | Finishing | - | - | - | - | Rough and medium rough processing | - | Finishing | Rough and medium rough processing | Rough and medium rough processing | - | Finishing | - | - | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | - | - | Finishing | Rough and medium rough processing | - | - | Rough and medium rough processing | - | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | - | - | Finishing | - | - | - | - | - | - |
Overall length (L)(mm) | 50 ~ 63 | - | - | 100 ~ 170 | - | - | 150 ~ 250 | 120 | 80 ~ 180 | 130 ~ 150 | 130 | 40 ~ 63 | 40 ~ 50 | 40 ~ 63 | 120 | 125 | - | 185 ~ 230 | 150 | - | - | - | 150 ~ 300 | 50 | 125 | 63 ~ 306 | - | - | - | 130 ~ 200 | - | - | - | 130 ~ 220 | - | - | - | - | - | - | - | 80 ~ 250 | 80 ~ 130 | 63 | 63 |
Number of flutes(sheet) | 7 ~ 12 | 2 ~ 3 | 4 ~ 20 | 2 ~ 5 | 3 ~ 18 | 3 | - | 3 | 1 ~ 8 | 3 ~ 5 | 4 ~ 5 | 5 ~ 10 | 3 ~ 9 | 5 ~ 12 | 3 ~ 4 | 3 ~ 5 | 4 ~ 7 | 3 ~ 5 | 3 ~ 6 | 4 ~ 11 | 4 ~ 12 | 6 ~ 18 | 2 ~ 4 | 6 | 3 | 2 ~ 6 | 2 ~ 4 | 6 ~ 12 | 4 ~ 10 | 2 ~ 3 | 4 ~ 14 | 3 ~ 6 | 4 ~ 14 | 1 ~ 3 | 4 ~ 7 | 2 ~ 6 | 2 ~ 5 | - | 4 ~ 6 | 4 ~ 14 | 4 ~ 6 | 1 ~ 5 | 1 ~ 7 | 8 ~ 28 | 10 ~ 12 |
Mounting Method | Arbor | With handle | - | - | - | Arbor | With handle | With handle | With handle | With handle | With handle | Arbor | Arbor | Arbor | With handle | With handle | Arbor | With handle | With handle / Arbor | - | Arbor | Arbor | With handle | Arbor | Centering Plug | With handle / Centering Plug | Arbor | Arbor | Arbor | With handle | Arbor | Arbor | Arbor | With handle | Arbor | Arbor | With handle | Arbor | Arbor | - | - | - | - | Arbor | Arbor |
Shank diameter (d)(mm) | 25.4 ~ 50.8 | - | - | 12 ~ 32 | - | - | 16 ~ 42 | - | 16 ~ 32 | 20 ~ 25 | 32 | 22 ~ 40 | - | - | 32 | 32 | - | 20 ~ 25 | 32 | - | 22 ~ 50.8 | 22 ~ 50.8 | 32 | - | 32 | MT5-M16 ~ CN50.8 | - | - | - | 25 ~ 32 | - | - | - | 20 ~ 32 | - | - | - | - | 22 | - | - | 10 ~ 32 | 10 ~ 32 | - | - |
Underneck length (ℓ1)(mm) | - | 25 ~ 50 | - | - | - | - | 25 ~ 65 | - | 25 ~ 60 | 35 ~ 50 | 40 | - | - | - | 30 | 40 | - | 35 ~ 75 | - | - | - | - | 50 ~ 180 | - | 40 | 50 ~ 170 | - | - | - | 50 ~ 120 | - | - | - | 60 ~ 70 | - | - | 23 ~ 65 | - | - | - | - | - | - | - | 63 |
Maximum Cutting Depth (Ad)(mm) | 15.4 ~ 15.7 | - | - | - | - | 2 | - | - | 10 | 17~35 | - | - | - | - | 10 | 6 | 16 ~ 18 | 17 ~ 35 | - | - | 6 ~ 10 | 6 | - | - | - | - | 0.5 | 0.5 | 9.5 | 5 | 5.5 | 4 ~ 6 | 6 | 16 ~ 18 | 16 ~ 18 | 22 ~ 24 | - | - | - | - | - | - | - | - | 6.4 |
Compatible Tip Material | Carbide Coat | - | - | - | - | Carbide Coat | - | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | - | - | - | Carbide Coat | - | Carbide Coat | - | - | - | - | - | - | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | - | - | - | - | - | - | - | - | - | - | - | - | Carbide Coat | - | - | - | - | Carbide Coat / Ceramic / CBN | Carbide Coat |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy