Radius End Mills (Carbide)（work material：Quenched and tempered steel Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model

  MISUMI

  By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.8 ～ 2	4.5 ～ 18	3	80 ～ 160	Quenched and tempered steel[◎]	6 ～ 16	24 ～ 105	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Tapered neck radius	Powerful Torsion (45°-60°)	±0.02

  From: 1,765,979 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Taper neck is effective in suppressing chattering·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.8 ～ 2	4.5 ～ 18	4	80 ～ 160	Quenched and tempered steel[◎]	6 ～ 16	24 ～ 105	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	Tapered neck radius	Powerful Torsion (45°-60°)	±0.02

  From: 2,311,265 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model

  MISUMI

  The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 6	0.2 ～ 0.5	3 ～ 9	4	50	Quenched and tempered steel[◎]	6	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.005

  From: 2,200,749 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model

  MISUMI

  [Features]·High helix angle end mill with radius for machining high hardness steel·High tool rigidity minimizes tool tilt during side milling·Machining of high hardness steel up to 65HRC is possible·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • Multi-Flutes （5 ~）
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.5 ～ 2	5 ～ 12	6	60 ～ 85	Quenched and tempered steel[○]	6 ～ 12	11 ～ 55	Plane / Side / Curved surface	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, 50° Spiral / Short Model

  MISUMI

  [Features]·High helix angle end mill with radius for machining high hardness steel·High tool rigidity minimizes tool tilt during side milling·Machining of high hardness steel up to 65HRC is possible·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • Multi-Flutes （5 ~）
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.5	12 ～ 24	6	60 ～ 100	Quenched and tempered steel[○]	6 ～ 12	-	Plane / Side / Curved surface	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.02

  From: 2,026,423 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type

  MISUMI

  The popular radius type for stainless steel processing is also effective in preventing chipping

  • Volume Discount

  • TS
  • SUS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.5 ～ 2	7 ～ 18	3	60 ～ 100	Quenched and tempered steel[○]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.02

  From: 2,257,675 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed·Long neck type is ideal for deep cavity milling of deep pockets, etc.·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	1 ～ 2	8 ～ 24	3	70 ～ 140	Quenched and tempered steel[◎]	4 ～ 12	28 ～ 90	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Long-Neck Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,847,095 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· 45° radius end mill capable of high-speed and high-efficiency machining

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.2 ～ 1	7.5 ～ 38	4	45 ～ 100	Quenched and tempered steel[◎]	3 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±20

  From: 1,497,250 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Regular Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· 4-flute radius end mill that achieves high feed/high speed machining

  • Volume Discount

  • High-Hardness Steel
  • 4 Flutes
  • SR

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 10	0.2 ～ 1.5	7.5 ～ 30	4	45 ～ 80	Quenched and tempered steel[◎]	3 ～ 10	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±10

  From: 727,236 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Coated Carbide Radius End Mill / For Tempered Steel / High Hardness Steel Machining / 3-Flute / 45° Torsion / Blade Length 2.5D Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· A tool with short blade length that suppresses chatter during machining

  • Volume Discount

  • High-Hardness Steel
  • 3 Flutes
  • SR

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 10	0.3 ～ 1	10 ～ 25	3	50 ～ 80	Quenched and tempered steel[◎]	4 ～ 10	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±10

  From: 26,499,735 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

  MISUMI

  Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.2 ～ 3	4 ～ 45	4	50 ～ 110	Quenched and tempered steel[◎]	4 ～ 20	-	Plane / Side / Curved surface / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02

  From: 519,316 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

  MISUMI

  Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 25	0.2 ～ 6.5	4 ～ 50	4	50 ～ 120	Quenched and tempered steel[◎]	6 ～ 25	-	Plane / Side / Curved surface / Groove	For High Hardness (Silicon Group)	radius	Other	±0.02

  From: 1,010,709 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 2-Flute Radius End Mill

  MISUMI

  [Features]·Cutting edge radius also reinforced cutting edge rigid·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted·Can process heat-treated steel up to 50HRC·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	2.5 ～ 30	2	50 ～ 130	Quenched and tempered steel[◎]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	-	radius	-	-

  From: 1,133,947 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

  MISUMI

  [Features]·Suppresses chattering with unequal lead and unequal flutes·Stable machining is possible while maintaining finished surface accuracy·Cutting edge radius also reinforced cutting edge rigid·Can process heat-treated steel up to 50HRC·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1.5 ～ 12	0.2 ～ 3	4 ～ 30	4	50 ～ 150	Quenched and tempered steel[◎]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	-	radius	-	-

  From: 1,099,574 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Roughing Radius GSRE-R

  NACHI(FUJIKOSHI)

  Ideal for high-efficiency roughing during contour machining and corner rounding of materials from steel to stainless steel.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.5 ～ 4	13 ～ 38	4	50 ～ 100	Quenched and tempered steel[◎]	6 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-

  From: 2,724,564 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Hard Radius GSH-R

  NACHI(FUJIKOSHI)

  Excellent in fracture resistance and is ideal for corner radius and contour machining of high hardness material.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.2 ～ 2	13 ～ 38	6 ～ 8	50 ～ 100	Quenched and tempered steel[◎]	6 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,369,290 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Radius 4GEOLS-R

  NACHI(FUJIKOSHI)

  Ideal for deep corner rounding of molds and machine parts. High precision machining is possible even for deep engraving.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 2	4.5 ～ 30	4	60 ～ 200	Quenched and tempered steel[◎]	6 ～ 20	12 ～ -	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-0.032～-0.059 ～ -0.014～-0.028

  From: 2,325,028 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Radius 4XSGEO-R

  NACHI(FUJIKOSHI)

  Ideal for corner rounding and contour machining of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	8 ～ 38	4	50 ～ 125	Quenched and tempered steel[◎]	6 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-0.032～-0.059 ～ -0.014～-0.028

  From: 1,963,261 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

  OSG

  Carbide mushroom-shaped end mill with rounded corners developed for shrink-fit types.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  10 ～ 20	0.5 ～ 1	10 ～ 20	2	32 ～ 58	Quenched and tempered steel[◎]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	For General Steels (AlCrN, etc.)	radius	No torsion	-

  From: 1,558,215 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2 Flutes Short with Corner Radius

  OSG

  2-Flute Short Corner Radius CBN-CR-EDS·Demonstrates high performance in machining high-rigid materials

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 6	0.2 ～ 2	3 ～ 6	2	45 ～ 50	Quenched and tempered steel[◎]	6	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	No torsion	-

  From: 6,857,447 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)

  OSG

  End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 2.5	0.1	0.7 ～ 3.7	2	50	Quenched and tempered steel[◎]	6	1.5 ～ 5	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: 1,797,033 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.Uses WXS coating with ultra-heat resistance and super rigid coating

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	1.5 ～ 3	12 ～ 40	3	80 ～ 150	Quenched and tempered steel[◎]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	-

  From: 3,244,889 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius

  OSG

  The highly sharp, positive cutting blade prevents the occurrence of work-hardening. Supports various cutter paths due to the rounded corners.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.2 ～ 1	13 ～ 26	4	90 ～ 110	Quenched and tempered steel[◎]	6 ～ 12	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 4,045,000 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Long with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  16 ～ 20	0.5 ～ 3	48 ～ 56	4	140 ～ 160	Quenched and tempered steel[◎]	16 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-

  From: 11,813,010 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The advanced "unequal lead" effect suppresses chatter and realizes amazing high efficiency machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 25	0.2 ～ 5	6 ～ 50	4	50 ～ 120	Quenched and tempered steel[◎]	6 ～ 25	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-

  From: 2,274,865 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WX Super Radius End Mills

  OSG

  A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 13	0.5 ～ 3	0.8 ～ 5.5	3 ～ 4	60 ～ 110	Quenched and tempered steel[◎]	6 ～ 12	5 ～ 24	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	No torsion	-

  From: 1,901,667 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s)

  15 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface

  OSG

  Cermet base material + FX coating end mill for bottom finish. Provides a mirror finish at astoundingly high speeds.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.1 ～ 0.4	0.9 ～ 3.2	4	90 ～ 160	Quenched and tempered steel[○]	6 ～ 20	9 ～ 30	Plane / Side / Curved surface	TiAlN	radius	No torsion	-

  From: 2,589,026 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation

  OSG

  In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	5 ～ 30	4	60 ～ 160	Quenched and tempered steel[◎]	6 ～ 20	9 ～ 60	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,041,359 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation with HS Shank

  OSG

  Ideal for high-efficiency machining of pocket engraving with the minimum required blade length and strong torsion. Overall tool length which fits shrink-fit and HSK types perfectly.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.5 ～ 1	9 ～ 18	4	50 ～ 80	Quenched and tempered steel[◎]	6 ～ 12	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,359,454 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)

  OSG

  Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	8 ～ 38	4	60 ～ 125	Quenched and tempered steel[◎]	6 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,491,666 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXS Coated Multiple Flutes Short Super

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Corner radius end mill with high rigidity for high speed machining. High-speed machining of hardened steel is also possible.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.2 ～ 3	15 ～ 50	6 ～ 8	90 ～ 180	Quenched and tempered steel[◎]	6 ～ 25	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 4,149,996 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The advanced "unequal lead" effect suppresses chatter and realizes amazing high efficiency machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.3 ～ 5	12 ～ 50	6	50 ～ 120	Quenched and tempered steel[◎]	6 ～ 25	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-

  From: 3,132,365 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose

  OSG

  Capable of high-efficiency, high-precision machining of wide standing walls using step cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  10	0.5	15	4	130	Quenched and tempered steel[◎]	8	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 4,444,485 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]

  UNION TOOL

  [Features]· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)· Available with an extensive lineup of corner radii

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1.5 ～ 6	0.2 ～ 2	3 ～ 15	2	45 ～ 50	Quenched and tempered steel[◎]	4 ～ 6	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiCN	radius	-	-

  From: 1,121,104 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CNRS 4-flute radius for machining titanium and super heat-resistant alloys

  UNION TOOL

  [Features]· High Efficiency 4-Flute Radius for Machining Titanium / Super Heat Resistant Alloy· Life-span increasing UT coating suitable for heat resistant and difficult to cut materials· Variable split, high torsion and positive rake angle design enables stable machining· A blade design that reduces the cutting resistance in helical and inclined use, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	1 ～ 2	16 ～ 26	4	90 ～ 120	Quenched and tempered steel[○/◎]	6 ～ 12	-	Plane / Side / Curved surface / Groove	For General Steels (AlCrN, etc.) / TiCN	radius	45°	-

  From: 2,097,620 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2 Flutes Radius

  OSG

  The three-dimensional negative shape of the R section provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 3	0.05 ～ 0.5	0.3 ～ 1.8	2	45 ～ 50	Quenched and tempered steel[◎]	4 ～ 6	1.5 ～ 6	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	-	radius	-	-

  From: 3,716,032 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGVR2T SA Coated Carbide Radius 2-Flute

  SANKO MFG

  [Features]· Ideal for corner rounding or cutting curved surfaces.· Can also be used to prevent chipped corners.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 5	10 ～ 45	2	50 ～ 115	Quenched and tempered steel[◎]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	0～+0.04

  From: 1,642,018 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGVR2LS SA Coating Carbide Radius 4-Flute Long Shank

  SANKO MFG

  [Features]· Suitable for corner rounding or cutting curved surfaces.· A long shank type which allows for machining in deep sections.· Finished surfaces can be improved and high-efficiency machining is possible.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.3 ～ 8	20 ～ 75	4	120 ～ 230	Quenched and tempered steel[◎]	6 ～ 25	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	0～+0.04

  From: 3,310,003 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGVR2LS SA Coating Carbide Radius 2-Flute Long Shank

  SANKO MFG

  Suitable for corner rounding or cutting curved surfaces. The long shank allows for machining in deep sections.[Features]· A long shank type which allows for machining in deep sections.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.3 ～ 8	20 ～ 75	2	120 ～ 230	Quenched and tempered steel[◎]	6 ～ 25	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	0～+0.04

  From: 2,895,318 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCD2 End Mill with Corner R, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  By adopting a long shank, it is possible to machine corner radius in deep parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.2 ～ 2	12 ～ 36	2	70 ～ 110	Quenched and tempered steel[○]	6 ～ 12	-	Plane / Groove	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 1,415,785 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCD2A End Mill with Corner R, 2-Flute, OK Coated

  OKAZAKI SEIKO

  By adopting a long shank, it is possible to machine corner radius in deep parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.2 ～ 2	12 ～ 36	2	70 ～ 110	Quenched and tempered steel[◎]	6 ～ 12	-	Plane / Groove	TiAlN	radius	Standard torsion (30-40°)	-

  From: 1,836,506 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCE4A Ultra-Strong Radius, 4-Flute, OK Coated

  OKAZAKI SEIKO

  A multi-function type end mill that is capable of groove milling and side milling as well as profiling.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.5 ～ 2	8 ～ 24	4	70 ～ 110	Quenched and tempered steel[◎]	6 ～ 12	15 ～ 42	Plane / Side / Groove	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 1,836,506 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated

  OKAZAKI SEIKO

  Due to the effect of OK hard coat, it is a multi-functional corner radius end mill that can machine high hardness materials up to 65 HRC at high speed.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.5 ～ 2	8 ～ 24	4	70 ～ 110	Quenched and tempered steel[○]	6 ～ 12	15 ～ 42	Plane / Side / Groove	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	-

  From: 1,836,506 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 10	0.5	21 ～ 34	4	60 ～ 90	Quenched and tempered steel[◎]	6 ～ 10	-	Side	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,665,286 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 1	8 ～ 38	4	60 ～ 125	Quenched and tempered steel[◎]	6 ～ 20	-	Side / Groove	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,079,667 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	UNION TOOL	UNION TOOL	OSG	SANKO MFG	SANKO MFG	SANKO MFG	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET
Product SeriesDòng sản phẩm	TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model	TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model	TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model	TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model	TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, 50° Spiral / Short Model	TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type	TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model	XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type	XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Regular Type	XCP Coated Carbide Radius End Mill / For Tempered Steel / High Hardness Steel Machining / 3-Flute / 45° Torsion / Blade Length 2.5D Type	XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model	TSC Series Carbide Uneven Lead 4-Flute Radius End Mill	VAC Series Carbide 2-Flute Radius End Mill	VAC Series Carbide 4-Flute Uneven Lead Radius End Mill	GS MILL Roughing Radius GSRE-R	GS MILL Hard Radius GSH-R	X's Mill Geo Radius 4GEOLS-R	X's Mill Geo Radius 4XSGEO-R	GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	CBN End Mills 2 Flutes Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)	Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Long with Corner Radius	Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)	WX Super Radius End Mills	Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation with HS Shank	ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)	WXS Coated Multiple Flutes Short Super	Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose	C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]	CNRS 4-flute radius for machining titanium and super heat-resistant alloys	CBN End Mills 2 Flutes Radius	SAGVR2T SA Coated Carbide Radius 2-Flute	SAGVR2LS SA Coating Carbide Radius 4-Flute Long Shank	SAGVR2LS SA Coating Carbide Radius 2-Flute Long Shank	SCD2 End Mill with Corner R, 2-Flute, Non-Coated	SCD2A End Mill with Corner R, 2-Flute, OK Coated	SCE4A Ultra-Strong Radius, 4-Flute, OK Coated	SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated	Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)	Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)
From	1,765,979 VND	2,311,265 VND	2,200,749 VND		2,026,423 VND	2,257,675 VND	1,847,095 VND	1,497,250 VND	727,236 VND	26,499,735 VND	519,316 VND	1,010,709 VND	1,133,947 VND	1,099,574 VND	2,724,564 VND	2,369,290 VND	2,325,028 VND	1,963,261 VND	1,558,215 VND	6,857,447 VND	1,797,033 VND	3,244,889 VND	4,045,000 VND	11,813,010 VND	2,274,865 VND	1,901,667 VND	2,589,026 VND	2,041,359 VND	2,359,454 VND	2,491,666 VND	4,149,996 VND	3,132,365 VND	4,444,485 VND	1,121,104 VND	2,097,620 VND	3,716,032 VND	1,642,018 VND	3,310,003 VND	2,895,318 VND	1,415,785 VND	1,836,506 VND	1,836,506 VND	1,836,506 VND	2,665,286 VND	2,079,667 VND
Days to ShipSố ngày giao hàng	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	15 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	15 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	8 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật	TS High-Hardness Steel 3 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel Multi-Flutes （5 ~） B (Stub)	TS High-Hardness Steel Multi-Flutes （5 ~） S (Short)	TS SUS 3 Flutes S (Short)	TS High-Hardness Steel 3 Flutes		High-Hardness Steel 4 Flutes SR	High-Hardness Steel 3 Flutes SR
Blade diameter (D)(φ)	3 ～ 12	3 ～ 12	2 ～ 6	6 ～ 12	6 ～ 12	3 ～ 12	4 ～ 12	3 ～ 12	3 ～ 10	4 ～ 10	2 ～ 20	2 ～ 25	1 ～ 12	1.5 ～ 12	6 ～ 20	6 ～ 20	3 ～ 20	3 ～ 20	10 ～ 20	3 ～ 6	0.5 ～ 2.5	6 ～ 20	6 ～ 12	16 ～ 20	3 ～ 25	2 ～ 13	6 ～ 20	3 ～ 20	6 ～ 12	3 ～ 20	6 ～ 25	6 ～ 25	10	1.5 ～ 6	6 ～ 12	0.5 ～ 3	3 ～ 20	6 ～ 25	6 ～ 25	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	6 ～ 10	3 ～ 20
R Size(mm)	0.8 ～ 2	0.8 ～ 2	0.2 ～ 0.5	0.5 ～ 2	0.5	0.5 ～ 2	1 ～ 2	0.2 ～ 1	0.2 ～ 1.5	0.3 ～ 1	0.2 ～ 3	0.2 ～ 6.5	0.1 ～ 3	0.2 ～ 3	0.5 ～ 4	0.2 ～ 2	0.2 ～ 2	0.2 ～ 3	0.5 ～ 1	0.2 ～ 2	0.1	1.5 ～ 3	0.2 ～ 1	0.5 ～ 3	0.2 ～ 5	0.5 ～ 3	0.1 ～ 0.4	0.2 ～ 3	0.5 ～ 1	0.2 ～ 3	0.2 ～ 3	0.3 ～ 5	0.5	0.2 ～ 2	1 ～ 2	0.05 ～ 0.5	0.5 ～ 5	0.3 ～ 8	0.3 ～ 8	0.2 ～ 2	0.2 ～ 2	0.5 ～ 2	0.5 ～ 2	0.5	0.2 ～ 1
Blade length (ℓ)(mm)	4.5 ～ 18	4.5 ～ 18	3 ～ 9	5 ～ 12	12 ～ 24	7 ～ 18	8 ～ 24	7.5 ～ 38	7.5 ～ 30	10 ～ 25	4 ～ 45	4 ～ 50	2.5 ～ 30	4 ～ 30	13 ～ 38	13 ～ 38	4.5 ～ 30	8 ～ 38	10 ～ 20	3 ～ 6	0.7 ～ 3.7	12 ～ 40	13 ～ 26	48 ～ 56	6 ～ 50	0.8 ～ 5.5	0.9 ～ 3.2	5 ～ 30	9 ～ 18	8 ～ 38	15 ～ 50	12 ～ 50	15	3 ～ 15	16 ～ 26	0.3 ～ 1.8	10 ～ 45	20 ～ 75	20 ～ 75	12 ～ 36	12 ～ 36	8 ～ 24	8 ～ 24	21 ～ 34	8 ～ 38
Number of flutes(sheet)	3	4	4	6	6	3	3	4	4	3	4	4	2	4	4	6 ～ 8	4	4	2	2	2	3	4	4	4	3 ～ 4	4	4	4	4	6 ～ 8	6	4	2	4	2	2	4	2	2	2	4	4	4	4
Overall Length (L)(mm)	80 ～ 160	80 ～ 160	50	60 ～ 85	60 ～ 100	60 ～ 100	70 ～ 140	45 ～ 100	45 ～ 80	50 ～ 80	50 ～ 110	50 ～ 120	50 ～ 130	50 ～ 150	50 ～ 100	50 ～ 100	60 ～ 200	50 ～ 125	32 ～ 58	45 ～ 50	50	80 ～ 150	90 ～ 110	140 ～ 160	50 ～ 120	60 ～ 110	90 ～ 160	60 ～ 160	50 ～ 80	60 ～ 125	90 ～ 180	50 ～ 120	130	45 ～ 50	90 ～ 120	45 ～ 50	50 ～ 115	120 ～ 230	120 ～ 230	70 ～ 110	70 ～ 110	70 ～ 110	70 ～ 110	60 ～ 90	60 ～ 125
work material	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○/◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]
Shank diameter (d)(mm)	6 ～ 16	6 ～ 16	6	6 ～ 12	6 ～ 12	6 ～ 12	4 ～ 12	3 ～ 12	3 ～ 10	4 ～ 10	4 ～ 20	6 ～ 25	6 ～ 12	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	6	6	6 ～ 20	6 ～ 12	16 ～ 20	6 ～ 25	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 25	6 ～ 25	8	4 ～ 6	6 ～ 12	4 ～ 6	6 ～ 20	6 ～ 25	6 ～ 25	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 10	6 ～ 20
Underneck length (ℓ1)(mm)	24 ～ 105	24 ～ 105	-	11 ～ 55	-	-	28 ～ 90	-	-	-	-	-	-	-	-	-	12 ～ -	-	-	-	1.5 ～ 5	-	-	-	-	5 ～ 24	9 ～ 30	9 ～ 60	-	-	-	-	-	-	-	1.5 ～ 6	-	-	-	-	-	15 ～ 42	15 ～ 42	-	-
Machining Application	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Groove	Plane / Groove	Plane / Side / Groove	Plane / Side / Groove	Side	Side / Groove
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	-	-	TiAlN	TiAlN	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	Non-Coated	TiAlN	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiCN	For General Steels (AlCrN, etc.) / TiCN	-	TiAlN	TiAlN	TiAlN	Non-Coated	TiAlN	TiAlN	For High Hardness (Silicon Group)	TiAlN	TiAlN
Type	Tapered neck radius	Tapered neck radius	High-Feed Radius	radius	radius	radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Other	-	-	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	No torsion	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	-	45°	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
R Precision(μm)	±0.02	±0.02	±0.005	±0.02	±0.02	±0.02	±0.015	±20	±10	±10	±0.02	±0.02	-	-	-	-	-0.032～-0.059 ～ -0.014～-0.028	-0.032～-0.059 ～ -0.014～-0.028	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0～+0.04	0～+0.04	0～+0.04	-	-	-	-	-	-

Loading...Tải…