Carbide Ball End Mills（work material：general steel Page3）

• You can add up to 6 items per a category to the compare list. Compare

  

  HBL, HM Coated 2-Flute Long Shank Ball

  UNION TOOL

  [Features]· Long Shank Ball End Middle Series Supporting High-Hardness Materials· Uses HardMax coating compatible with high-speed machining of high-hardness materials· Capable of stable, long-life machining for both dry and wet type

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 6	4.5 ～ 25	-	3 ～ 12	2	80 ～ 200	general steel[○]	-0.007～0.007 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,712,050 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HTNB HM coat 2-flute taper neck ball end mill

  UNION TOOL

  [Features]· High rigidity realized through an improved taper neck shape.· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity· 65 HRC high hardness materials can also be cut

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 2	0.16 ～ 50	1.5 ～ 62	4 ～ 6	2	4 ～ 120	general steel[○]	-0.005～0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.)	Tapered neck ball

  From: 1,074,285 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]

  UNION TOOL

  [Features]· 3-flute type achieves remarkably high feed. Shortens the roughing time· Deep cutting is possible, enabling high efficiency machining even with shape processing where feeding speed cannot be increased· Designed with 3-flute variable split to suppress chatter.· It uses UTCOAT and can support a wide range from raw materials through low/medium hardness materials up to 55 HRC· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip shape (excluding R0.75 and below)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 6	0.9 ～ 18	-	4 ～ 12	3	50 ～ 120	general steel[◎]	-0.01～0.01 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	TiCN	Ball

  From: 891,729 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB345 3-Flute Ball-End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "standard / machining category" of narrowing condition.[Features]・ High efficiency machining with less chattering is possible by adopting unique 3-flute shape and unequal division.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 20	-	6 ～ 12	3	60 ～ 120	general steel[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,264,316 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSB200 CBN Super Speed Ball End Mill

  NS TOOL

  [Features]・ A highly efficient CBN ball end mill that combines the long lifespan and high precision of CBN with the ease of use of carbide.・ The same incision as the carbide finish is possible.・ R accuracy ±0.003 and chipping resistance improved due to unique flute shape.・ The shape of the connection between the R flute and the peripheral blade is smooth and has no step.・ Up to 68 HRC high hardness material can be machined.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1	0.15 ～ 1.2	0.3 ～ 5	4	2	52 ～ 53	general steel[○]	0.005～-0.005 ～ 3 to -3	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 3,996,516 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SFB200 CBN Super Finish Ball End Mill

  NS TOOL

  The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or more

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1	0.15 ～ 1.2	0.5 ～ 5	4	2	50 ～ 52	general steel[○]	0.003～-0.003 ～ 0.005～-0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 5,454,837 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH230 2-Flute Ball-End Mill for High-Hardness

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Standard type ball end mill for high hardness. Ideal for finish machining・ Supports high hardness materials up to 68 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 100	general steel[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 595,863 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH345 3-Flute Ball-End Mill for High-Hardness

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Achieves stable and long lifespan with long-time machining in high hardness range (48 to 65 HRC). In pursuit of the cutting diameter shape, the manufacturer improved the amount of tilt and machining precision.・ High efficiency machining with less chattering is possible by adopting unique 3-flute shape and unequal division.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	1.5 ～ 10	-	6	3	60 ～ 80	general steel[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,697,886 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

  NS TOOL

  The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.01 ～ 0.05	0.02 ～ 0.1	-	4	1	50	general steel[○]	-	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 6,538,762 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining

  NS TOOL

  [Features]・ Realized standardization from R size R0.005.・ Small ball end mill "micro ball" expands the micro machining area.・ A unique R shape is used to achieve a good finished surface.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.005 ～ 0.05	0.01 ～ 0.1	-	4	1	45	general steel[◎]	0.002～-0.002	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 1,661,690 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Short shank type (shrink fit) long neck ball end mill

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.2 ～ 12	-	4 ～ 12	2	35 ～ 60	general steel[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 632,060 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)

  NS TOOL

  Short shank type (shrink fit) long neck ball end mill

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1.5	0.15 ～ 2.5	0.5 ～ 20	4	2	35 ～ 50	general steel[◎]	0.005～-0.005	Curved surface / Side / Engraving / R Groove	TiAlN	Long-Neck Ball

  From: 686,354 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230S MUGEN-COATING Short Ball End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ High-stiffness design enables high speed machining without chattering.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.2 ～ 12	-	4 ～ 12	2	50 ～ 110	general steel[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 812,648 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBL230 MUGEN-COATING Long Ball End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN coating is used for the long ball end mill.・ The size is R0.1 to R5.・ Machining that makes use of the long shank is possible.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 5	0.5 ～ 25	-	3 ～ 10	2	70 ～ 200	general steel[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,022,867 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill

  NS TOOL

  The tuned Infinity coating sustains high precision machining for a long time

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.1 ～ 10	-	4 ～ 6	2	50 ～ 80	general steel[◎]	0.002～-0.002	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,083,728 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels

  NS TOOL

  [Features]・ Ball end mill designed for high speed and high hardness machining.・ Many cuts can be set, and it is effective at high speed feed.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	0.5 ～ 15	4 ～ 6	2	50 ～ 60	general steel[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 975,335 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CFLB, UT Coat 3-Flute Long Neck Ball End Mill

  UNION TOOL

  [Features]· Provides amazing high feed compared to the conventional 2-flute long neck ball.· With new UTCOAT, outstanding lubricity and long life are achieved.· Designed with 3-flute variable split to reduce chatter, enabling high precision die cutting.· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip design (excluding R0.75 and below)· O.D. Tolerance: 0/-0.02

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 3	0.48 ～ 4.8	2 ～ 40	4 ～ 6	3	50 ～ 90	general steel[◎]	-0.007～0.007 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	TiCN	Long-Neck Ball

  From: 902,746 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Miniature Ball End Mill NCB-2

  NS TOOL

  Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 0.9	0.8 ～ 3.6	-	3	2	35	general steel[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 1,641,670 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Miniature Ball-End Mill NCB-2X

  NS TOOL

  Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 0.9	0.8 ～ 3.6	-	3	2	35	general steel[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiCN	Ball

  From: 1,856,273 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X Coated Ball-End Mill NSB-2X

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Ideal for high-precision 3D machining. All-purpose type for roughing/medium/finishing machining

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	3 ～ 15	-	4 ～ 12	2	60 ～ 110	general steel[◎]	0.01～-0.01 ～ 0.02～-0.02	Curved surface / Side / Engraving / R Groove	TiCN	Ball

  From: 1,742,542 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Ball End Mill NSBL-2

  NS TOOL

  The blade length is 5 times the radius. 3D machining utilizing the benefits of a long shank is possible

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	15 ～ 30	-	6 ～ 12	2	120 ～ 180	general steel[◎]	0.02～-0.02	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 2,539,098 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN coating is used for the extra long ball end mill. Machining that makes use of the long shank is possible.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 5	2.5 ～ 25	-	3 ～ 10	2	100 ～ 250	general steel[◎]	0.02～-0.02	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 3,007,321 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 3-Flute WXS

  OSG

  A long neck ball end mill with a WXS coat.A corner radius shape that achieves both cutting force and cutting edge rigidity.Peripheral cutting edge and bottom cutting edge specifications to suppress chattering vibration.A special edge line prevents encroachment.Optimal chip gullet for excellent chip removal capability.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.75 ～ 4.5	4 ～ 30	4 ～ 6	3	50 ～ 70	general steel[○]	±0.07	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: 727,862 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Air Hole Ball End Mill 2-Flute, Standard Type

  EIKOSHA

  Graphite Electrode Milling, with Air Wheel

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 12.5	20 ～ 60	-	6 ～ 25	2	70 ～ 180	general steel[○]	±0.02	Curved surface / Side / Engraving / R Groove	-	Ball

  From: 2,129,489 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Air Hole Ball End Mill 2-Flute, Long Type

  EIKOSHA

  Graphite Electrode Milling, Long, with Air Wheel

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3.25 ～ 12.5	40 ～ 80	-	6 ～ 25	2	150 ～ 250	general steel[○]	±0.02	Curved surface / Side / Engraving / R Groove	-	Ball

  From: 4,009,538 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Air Hole Ball End Mill 4-Flute, Standard Type

  EIKOSHA

  Graphite Electrode Milling, with Air Wheel

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 12.5	20 ～ 60	-	6 ～ 25	4	70 ～ 180	general steel[○]	±0.02	Curved surface / Side / Engraving / R Groove	-	Ball

  From: 2,315,192 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Air Hole Ball End Mill 4-Flute, Long Type

  EIKOSHA

  Graphite Electrode Milling, Long, with Air Wheel

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 12.5	40 ～ 80	-	6 ～ 25	4	150 ～ 250	general steel[○]	±0.02	Curved surface / Side / Engraving / R Groove	-	Ball

  From: 4,244,815 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCBE SA Coating Carbide 2-Flute Ball-Nose

  SANKO MFG

  [Features]· Machining is possible with a wide range of materials, from raw materials to hardened steel.· Also capable of high-speed machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 12.5	0.9 ～ 50	-	3 ～ 25	2	50 ～ 180	general steel[◎]	0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,659,132 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCBELS SA Coating Carbide 2-Flute Ball-Nose Long Shank

  SANKO MFG

  Machining is possible with a wide range of materials, from raw materials to hardened steel. The long shank allows for machining in deep sections.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 12.5	4.5 ～ 80	-	3 ～ 25	2	100 ～ 230	general steel[◎]	0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,340,513 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCBE4T SA Coated Carbide 4-Flute Ball

  SANKO MFG

  Machining is possible with a wide range of materials, from raw materials to hardened steel. 4-flute blade enables high-speed and high-efficiency machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	12 ～ 25	-	6 ～ 12	4	80 ～ 110	general steel[◎]	0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,548,305 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GCBE 2-Flute Carbide Ball

  SANKO MFG

  Machining of hardened steel, high-speed machining, and high-efficiency machining are possible.Helix angle: Standard helix (30 to 44°)R Accuracy (µm)-30 to 0

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 10	0.9 ～ 40	-	3 ～ 20	2	50 ～ 160	general steel[○]	0～-0.03	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 1,520,248 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL Ball End Mill GSXB20000 Type

  SUMITOMO ELECTRIC HARDMETAL

  Adopting low Co carbide base material improves rigidity and abrasion resistance at the same time. By adopting an ultra-smooth TiAlN diameter coat, abrasion resistance is improved and cutting force is reduced, enabling high-efficiency roughing.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 4	0.9 ～ 12	1.2 ～ 4	4 ～ 8	2	50 ～ 90	general steel[○]	±0.01	R Groove	For General Steels (AlCrN, etc.)	Ball

  From: 784,714 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Diameter Ball End Mill, 2-Flute

  ATOM

  Good surface roughness of the cutting edge realizes high quality finished surface.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 0.475	0.2 ～ 2.5	-	3	2	40	general steel[○]	-	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 1,501,167 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Ball End Mill, 2-Flute

  ATOM

  Supports a wide range of applications, from general steel to nonferrous metals and resins. High sharpness without coating achieves high-precision and high-quality finished surfaces.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	3 ～ 40	-	4 ～ 20	2	40 ～ 105	general steel[○]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 1,421,889 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Ball End Mill, 4-Flute

  ATOM

  Supports a wide range of applications, from general steel to nonferrous metals and resins. A multi-purpose type with support from rough machining to finish machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	3 ～ 40	-	4 ～ 20	2	40 ～ 105	general steel[○]	±0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: 1,624,903 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BEM2 ball end mill G2

  ASAHI TOOLS

  Up to R4.5 specification products (solid tip) have a torsional shape on the rounded section as well, resulting in corners with improved profiling efficiency, which are ideal for rounding.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 20	9 ～ 80	-	10 ～ 32	2	100 ～ 220	general steel[○]	-	Curved surface / R Groove	Non-Coated	Ball

  From: 3,863,685 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BEM2 Long Shank Ball End Mill G2

  ASAHI TOOLS

  2-flute ball end mill long shank type. Ideal for rounding corners.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  5 ～ 15	30 ～ 60	-	12 ～ 32	2	130 ～ 240	general steel[○]	-	Curved surface / R Groove	Non-Coated	Ball

  From: 5,134,621 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2 Ball End Mill, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  Ball end mill with standard radius accuracy of ±10 μm that is suitable for machining a wide range of workpiece materials.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 55	-	4 ～ 25	2	60 ～ 180	general steel[◎]	-10～+10	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: 1,186,296 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2L Long Ball End Mill, 2-Flute, Non-Coated

  OKAZAKI SEIKO

  [Features]A carbide long ball end mill with 2 flutes.The deep rib type prevents tool interference during deep cutting.The long shank enables end milling over a wide area.[Applications]Suitable for curved surface milling, engraving, and R-grooving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 12.5	2 ～ 60	14 ～ 21	6 ～ 25	2	80 ～ 230	general steel[◎]	-	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: 1,568,773 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2LA Long Ball End Mill, 2-Flute, OK Coated

  OKAZAKI SEIKO

  [Features]A carbide long ball end mill with 2 flutes.The deep rib type prevents tool interference during deep cutting.The long shank allows for a wide range of die milling.[Applications]Suitable for curved surface milling, engraving, and R-grooving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 12.5	2 ～ 60	14 ～ 21	6 ～ 25	2	80 ～ 230	general steel[◎]	-	Curved surface / Engraving / R Groove	TiAlN	Ball

  From: 1,654,018 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated

  OKAZAKI SEIKO

  Long shank type allows machining in deep places. In addition, OK hard coat enables machining of hardened steel up to 65 HRC

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 12.5	2 ～ 60	14 ～ 21	6 ～ 25	2	80 ～ 230	general steel[○]	-	Curved surface / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,855,631 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated

  OKAZAKI SEIKO

  Ball end mill with standard radius accuracy of ±10 μm that is suitable for machining a wide range of workpiece materials.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 55	-	4 ～ 25	2	60 ～ 180	general steel[◎]	-10～+10	Curved surface / Engraving / R Groove	TiAlN	Ball

  From: 449,735 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid ball end mill SBEL

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	5 ～ 80	-	4 ～ 32	2	45 ～ 150	general steel[○]	0～-50	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: 2,165,489 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid ball end mill L S-SBE

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 15	4 ～ 70	-	4 ～ 32	2	140 ～ 250	general steel[○]	-	Curved surface / Engraving / R Groove	Non-Coated	Ball

  From: 4,193,600 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Ball (Slim Shank) DZ-OCUB

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 10	9 ～ 30	5.8 ～ 7.8	5 ～ 18	2	120 ～ 180	general steel[○/◎]	10～-10	Curved surface / R Groove	TiAlN	Ball

  From: 1,666,068 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	UNION TOOL	UNION TOOL	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	OSG	EIKOSHA	EIKOSHA	EIKOSHA	EIKOSHA	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SUMITOMO ELECTRIC HARDMETAL	ATOM	ATOM	ATOM	ASAHI TOOLS	ASAHI TOOLS	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET
Product SeriesDòng sản phẩm	HBL, HM Coated 2-Flute Long Shank Ball	HTNB HM coat 2-flute taper neck ball end mill	CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]	MSB345 3-Flute Ball-End Mill	SSB200 CBN Super Speed Ball End Mill	SFB200 CBN Super Finish Ball End Mill	MSBH230 2-Flute Ball-End Mill for High-Hardness	MSBH345 3-Flute Ball-End Mill for High-Hardness	SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining	NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining	MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)	MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)	MSB230S MUGEN-COATING Short Ball End Mill	MSBL230 MUGEN-COATING Long Ball End Mill	MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill	MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels	CFLB, UT Coat 3-Flute Long Neck Ball End Mill	Miniature Ball End Mill NCB-2	X Coated Miniature Ball-End Mill NCB-2X	X Coated Ball-End Mill NSB-2X	Long Ball End Mill NSBL-2	MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230	Long Neck Ball Type, 3-Flute WXS	Carbide Air Hole Ball End Mill 2-Flute, Standard Type	Carbide Air Hole Ball End Mill 2-Flute, Long Type	Carbide Air Hole Ball End Mill 4-Flute, Standard Type	Carbide Air Hole Ball End Mill 4-Flute, Long Type	SAGCBE SA Coating Carbide 2-Flute Ball-Nose	SAGCBELS SA Coating Carbide 2-Flute Ball-Nose Long Shank	SAGCBE4T SA Coated Carbide 4-Flute Ball	GCBE 2-Flute Carbide Ball	GSX MILL Ball End Mill GSXB20000 Type	Small Diameter Ball End Mill, 2-Flute	Standard Ball End Mill, 2-Flute	Standard Ball End Mill, 4-Flute	BEM2 ball end mill G2	BEM2 Long Shank Ball End Mill G2	SBD2 Ball End Mill, 2-Flute, Non-Coated	SBD2L Long Ball End Mill, 2-Flute, Non-Coated	SBD2LA Long Ball End Mill, 2-Flute, OK Coated	SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated	SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated	Solid ball end mill SBEL	Solid ball end mill L S-SBE	One Cut Ball (Slim Shank) DZ-OCUB
From	1,712,050 VND	1,074,285 VND	891,729 VND	1,264,316 VND	3,996,516 VND	5,454,837 VND	595,863 VND	1,697,886 VND	6,538,762 VND	1,661,690 VND	632,060 VND	686,354 VND	812,648 VND	2,022,867 VND	1,083,728 VND	975,335 VND	902,746 VND	1,641,670 VND	1,856,273 VND	1,742,542 VND	2,539,098 VND	3,007,321 VND	727,862 VND	2,129,489 VND	4,009,538 VND	2,315,192 VND	4,244,815 VND	1,659,132 VND	2,340,513 VND	2,548,305 VND	1,520,248 VND	784,714 VND	1,501,167 VND	1,421,889 VND	1,624,903 VND	3,863,685 VND	5,134,621 VND	1,186,296 VND	1,568,773 VND	1,654,018 VND	1,855,631 VND	449,735 VND	2,165,489 VND	4,193,600 VND	1,666,068 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	12 Day(s)	12 Day(s)	6 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	10 Day(s) or more	10 Day(s) or more	8 Day(s) or more	10 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more
R Size(mm)	1.5 ～ 6	0.1 ～ 2	0.3 ～ 6	0.5 ～ 6	0.1 ～ 1	0.1 ～ 1	0.05 ～ 6	0.5 ～ 3	0.01 ～ 0.05	0.005 ～ 0.05	0.1 ～ 6	0.1 ～ 1.5	0.1 ～ 6	0.1 ～ 5	0.05 ～ 3	0.1 ～ 3	0.3 ～ 3	0.2 ～ 0.9	0.2 ～ 0.9	1 ～ 6	3 ～ 6	0.5 ～ 5	0.5 ～ 3	2 ～ 12.5	3.25 ～ 12.5	2 ～ 12.5	3 ～ 12.5	0.3 ～ 12.5	1.5 ～ 12.5	3 ～ 6	0.3 ～ 10	0.3 ～ 4	0.05 ～ 0.475	0.5 ～ 10	0.5 ～ 10	2 ～ 20	5 ～ 15	0.5 ～ 12.5	1 ～ 12.5	1 ～ 12.5	1 ～ 12.5	0.5 ～ 12.5	0.5 ～ 15	1 ～ 15	3 ～ 10
Blade length (ℓ)(mm)	4.5 ～ 25	0.16 ～ 50	0.9 ～ 18	1.5 ～ 20	0.15 ～ 1.2	0.15 ～ 1.2	0.1 ～ 20	1.5 ～ 10	0.02 ～ 0.1	0.01 ～ 0.1	0.2 ～ 12	0.15 ～ 2.5	0.2 ～ 12	0.5 ～ 25	0.1 ～ 10	0.2 ～ 6	0.48 ～ 4.8	0.8 ～ 3.6	0.8 ～ 3.6	3 ～ 15	15 ～ 30	2.5 ～ 25	0.75 ～ 4.5	20 ～ 60	40 ～ 80	20 ～ 60	40 ～ 80	0.9 ～ 50	4.5 ～ 80	12 ～ 25	0.9 ～ 40	0.9 ～ 12	0.2 ～ 2.5	3 ～ 40	3 ～ 40	9 ～ 80	30 ～ 60	2 ～ 55	2 ～ 60	2 ～ 60	2 ～ 60	2 ～ 55	5 ～ 80	4 ～ 70	9 ～ 30
Underneck length (ℓ1)(mm)	-	1.5 ～ 62	-	-	0.3 ～ 5	0.5 ～ 5	-	-	-	-	-	0.5 ～ 20	-	-	-	0.5 ～ 15	2 ～ 40	-	-	-	-	-	4 ～ 30	-	-	-	-	-	-	-	-	1.2 ～ 4	-	-	-	-	-	-	14 ～ 21	14 ～ 21	14 ～ 21	-	-	-	5.8 ～ 7.8
Shank diameter (d)(mm)	3 ～ 12	4 ～ 6	4 ～ 12	6 ～ 12	4	4	4 ～ 12	6	4	4	4 ～ 12	4	4 ～ 12	3 ～ 10	4 ～ 6	4 ～ 6	4 ～ 6	3	3	4 ～ 12	6 ～ 12	3 ～ 10	4 ～ 6	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	3 ～ 25	3 ～ 25	6 ～ 12	3 ～ 20	4 ～ 8	3	4 ～ 20	4 ～ 20	10 ～ 32	12 ～ 32	4 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	4 ～ 25	4 ～ 32	4 ～ 32	5 ～ 18
Number of flutes(sheet)	2	2	3	3	2	2	2	3	1	1	2	2	2	2	2	2	3	2	2	2	2	2	3	2	2	4	4	2	2	4	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2
Overall Length (L)(mm)	80 ～ 200	4 ～ 120	50 ～ 120	60 ～ 120	52 ～ 53	50 ～ 52	50 ～ 100	60 ～ 80	50	45	35 ～ 60	35 ～ 50	50 ～ 110	70 ～ 200	50 ～ 80	50 ～ 60	50 ～ 90	35	35	60 ～ 110	120 ～ 180	100 ～ 250	50 ～ 70	70 ～ 180	150 ～ 250	70 ～ 180	150 ～ 250	50 ～ 180	100 ～ 230	80 ～ 110	50 ～ 160	50 ～ 90	40	40 ～ 105	40 ～ 105	100 ～ 220	130 ～ 240	60 ～ 180	80 ～ 230	80 ～ 230	80 ～ 230	60 ～ 180	45 ～ 150	140 ～ 250	120 ～ 180
work material	general steel[○]	general steel[○]	general steel[◎]	general steel[◎]	general steel[○]	general steel[○]	general steel[◎]	general steel[◎]	general steel[○]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[○]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[○]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[○]	general steel[◎]	general steel[○]	general steel[○]	general steel[○/◎]
R Precision(μm)	-0.007～0.007 ～ -0.005～0.005	-0.005～0.005	-0.01～0.01 ～ -0.005～0.005	0.01～-0.01	0.005～-0.005 ～ 3 to -3	0.003～-0.003 ～ 0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01	-	0.002～-0.002	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01	0.002～-0.002	0.005～-0.005 ～ 0.01～-0.01	-0.007～0.007 ～ -0.005～0.005	0.01～-0.01	0.01～-0.01	0.01～-0.01 ～ 0.02～-0.02	0.02～-0.02	0.02～-0.02	±0.07	±0.02	±0.02	±0.02	±0.02	0～-0.03	0～-0.03	0～-0.03	0～-0.03	±0.01	-	±0.01	±0.01	-	-	-10～+10	-	-	-	-10～+10	0～-50	-	10～-10
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / R Groove
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.)	TiCN	TiAlN	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiCN	Non-Coated	TiCN	TiCN	Non-Coated	TiAlN	For High Hardness (Silicon Group)	-	-	-	-	TiAlN	TiAlN	TiAlN	Non-Coated	For General Steels (AlCrN, etc.)	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	For High Hardness (Silicon Group)	TiAlN	Non-Coated	Non-Coated	TiAlN
Type	Ball	Tapered neck ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball

Loading...Tải…