(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more.
Square End Mills (Carbide)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
602 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 3 ～ 60 - 4 ～ 20 4 45 ～ 130 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Standard torsion (30-40°) Plane / Side / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 18 2.5 ～ 32 - 3 ～ 20 4 38 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN Sharp Edge Square From: 540,666 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
Popular XAL Series with the 4-flute structure that's ideal for side milling has been further reduced in price!
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 2 ～ 40 - 4 ～ 20 4 40 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Standard torsion (30-40°) Plane / Side / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE
OSG
[Features]· 2-flute end mill coated with WXL hard lubricating film coating. Proven cutting performance on not only steel but also copper alloys. Recommended for both wet-type and dry-type milling.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 30 0.2 ～ 60 - 4 ～ 32 2 45 ～ 140 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge Square From: 285,000 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 3 ～ 115 - 6 ～ 20 3 40 ～ 200 Aluminum[◎] / Copper[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated - Square From: 400,120 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Anti-Vibration Short Carbide End Mill_AE-VMS
OSG
[Features]· DUARISE coating· Offers excellent lubrication, wear resistance and high-temperature oxidation resistance. The composite multilayer structure helps prevent thermal cracking. Smoothing of the coating surface improves machining surface precision. The positive-angle flute has excellent sharpness and helps reduce cutting resistance. A flute form that achieves both high tool rigidity and a good chip discharge performance, enabling stable machining and a reduction in burring. Use of a variable-lead geometry and unequal divisions enables stable, high-efficiency machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 8 ～ 26 - 6 ～ 12 4 60 ～ 90 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Variable lead Side / Groove / Inclined Cuts - - Square From: 558,000 VND Days to Ship: Số ngày giao hàng: 10 Day(s) or more
10 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Square End mill [4SUE]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456320.jpg?$product_view_b$)
HANSONG M&T
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 2.5 ～ 40 - 6 ～ 20 4 50 ～ 100 - 43° - TiAlN - Square From: 954,600 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The flute length is 5 times the cutting diameter and features a 45° helix angle.・ Even deep-side cutting can be machined with the sharp cutting edge.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 11.9 2.5 ～ 59.5 - 4 ～ 12 2 40 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts Non-Coated With Lead Square From: 1,694,478 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_FX-MG-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A general-purpose 4-flute end mill with FX coating that has excellent heat resistance. Supports high speed and high feed machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 30 6 ～ 45 - 4 ～ 32 4 40 ～ 125 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge Square From: 1,920,376 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ALZ345 High-Efficiency Heavy Cutting End Mill for Aluminum
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ AL series realizes stable and high efficiency machining under all conditions.・ The drilling performance is greatly improved.・ Highly efficient type with improved cutting chip discharge.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 1.5 ～ 18 3 ～ 36 4 ～ 12 3 45 ～ 80 Aluminum[◎] Powerful Torsion (45°-60°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated With Lead Square From: 921,041 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A 2-flute end mill with a rigid lubricating film WXL coating. Effective for cutting not only steel but also copper alloys. A 4D flute length type that is recommended for both wet and dry machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.2 ～ 12 0.8 ～ 48 - 4 ～ 12 2 45 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts For General Steels (AlCrN, etc.) With Lead Square From: 483,333 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ By applying a rigid lubricating film WXL coating, it is also effective for a wide range of cutting such as general steel, hardened steel and copper alloys.・ Recommended for both wet and dry processing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 30 2.5 ～ 45 - 4 ～ 32 4 40 ～ 125 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square From: 428,333 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
![Square End Mill [4APE (APE4000)]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456128.jpg?$product_view_b$)
Square End Mill [4APE (APE4000)]
HANSONG M&T
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 20 6 ～ 45 - 6 ～ 20 4 45 ～ 100 - 30° - TiAlN - Square From: 868,116 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 20 0.3 ～ 60 - 3 ～ 20 2 40 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
XAC series carbide square end mill, 4-flute / long model
MISUMI
User friendly TiAlN coated series with long flute length
- Volume Discount
- TiAlN
- General Steel
- 4 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 12 ～ 30 - 6 ～ 12 4 50 ～ 90 general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Inclined Cuts TiAlN Sharp Edge Square From: 671,026 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS
OSG
With a wide chip pocket, which has been designed considering the sharpness and chip discharge, it realizes high efficiency machining of grooves and side faces.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 16 8 ～ 32 - 6 ～ 16 3 50 ～ 100 Aluminum[◎] / Copper[◎] / Resin[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated With Lead Square From: 1,167,530 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
4-Flute Short Square End Mill (GS-EMS)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 25 2.5 ～ 45 - 6 ～ 25 4 40 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts FX - Square From: 572,324 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Carbide Solid End Mill, Long Shank, 6-Flute GM-6EL
KABUSYUUKOUGU
GM Series end mill that has both high hardness and elastic modulus due to the use of carbide material and features the reasonable balance with the good cutting quality. It can extend the tool lifespan.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 6 ～ 20 24 ～ 75 - 6 ～ 20 6 75 ～ 150 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] Powerful Torsion (45°-60°) Side / Groove TiAlN - Square From: 395,788 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 4D GSX4C-4D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 4 ～ 80 - 4 ～ 20 4 40 ～ 140 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 840,386 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-Flute Short Square End Mill (GS-EDS)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 25 0.2 ～ 45 - 4 ～ 25 2 40 ～ 120 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts FX - Square From: 415,957 VND Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 16 2.5 ～ 40 - 6 ～ 16 4 50 ～ 100 general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts AlTiN - Long-Neck Square From: 541,798 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Coated (TiAIN) Solid Carbide End Mills (2 Flutes) IC2SSV
THE CUT
[Features]· Gash land· Outstanding cost performance.· Capable of machining a wide range of workpieces from raw materials up to alloy steel.· TiAlN coated for a longer tool life.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 30 2.5 ～ 55 - 4 ～ 32 2 40 ～ 130 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] Standard torsion (30-40°) Side / Groove TiAlN - Square From: 366,803 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
The price of the low-cost classic XAL Series has been further reduced!
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 20 0.2 ～ 40 - 3 ～ 20 2 40 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model
MISUMI
A long flute length type that supports deep engraving
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 12 2 ～ 48 - 4 ～ 12 2 45 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE
OSG
[Notice]Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A 2-flute end mill with a rigid lubricating film WXL coating.・ Effective for cutting not only steel but also copper alloys.・ A 1.5D flute length type that is recommended for both wet and dry machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 12 0.15 ～ 18 - 4 ～ 12 2 45 ～ 75 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge Square From: 275,205 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A general-purpose 2-flute end mill with FX coating that has excellent heat resistance.・ Supports a wide range of machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.2 ～ 30 0.4 ～ 45 - 3 ～ 32 2 40 ～ 125 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN Sharp Edge Square From: 1,429,954 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AL3D-2 Aluminum-Only End Mill (3x Blade Length Type)
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ AL series realizes stable and high efficiency machining under all conditions.· Provides machining surface precision across a wide area, suppressing chattering even during high-speed machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 3 ～ 36 - 4 ～ 12 2 45 ～ 90 Aluminum[◎] Powerful Torsion (45°-60°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated Sharp Edge Square From: 866,943 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MUGEN-COATING 2-Flute End Mill MSE230
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN Coating is used for the 2-flute end mill.・ Capable of universal cutting, from roughing to finishing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.1 ～ 12 0.15 ～ 30 - 4 ～ 12 2 45 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 379,275 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MSEM430 MUGEN-COATING 4-Flute Medium End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The flute length is 4 times the cutting diameter and features a 30° helix angle.・ Ideal for side-finish machining
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 4 ～ 80 - 4 ～ 20 4 50 ～ 140 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 1,119,727 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1.5 ～ 16 3.75 ～ 40 - 4 ～ 16 4 45 ～ 105 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Standard torsion (30-40°) Plane / Side / Inclined Cuts For General Steels (AlCrN, etc.) Sharp Edge / With Lead Square Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model
MISUMI
The blade diameter of 0.01 mm increments can be selected from the extensive variations of flute length
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3.15 ～ 19.99 3.5 ～ 48 - 6 ～ 20 2 40 ～ 105 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts Non-Coated Sharp Edge / With Lead Square From: 820,745 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·Effective for processing deep parts due to extra long blade length·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted·Can process heat-treated steel up to 50HRC·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 4 ～ 80 - 6 ～ 20 2 60 ～ 200 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] - Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking - - Square From: 680,058 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 2.5 ～ 50 - 4 ～ 20 4 40 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) With Lead Square From: 589,568 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 2D GSX4C-2D
NACHI(FUJIKOSHI)
[Specifications]· Shape: Square end mill (carbide)· Coating: For General Steels (AlCrN, etc.)· Work Material: General Steel [◎] / Tempered Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Casting [○] / Titanium [◎][Applications] Flat surfaces / side surfaces / grooves / inclined cutting
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 20 2 ～ 40 - 4 ～ 20 4 40 ～ 100 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts For General Steels (AlCrN, etc.) With Lead Square From: 589,568 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills 2 Flutes Long_MG-EDL
OSG
[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.[Specifications]·Blade diameters of 6 to 12 mm are sharp, and 13 to 25 mm are sharp.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 13 ～ 25 40 ～ 67 - 12 ～ 25 2 100 ～ 140 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated With Lead Square From: 7,053,773 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The flute length is twice the cutting diameter and features a 30° helix angle.・ Capable of universal cutting, from roughing to finishing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.5 ～ 12 1 ～ 24 - 4 ～ 12 2 40 ～ 75 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts Non-Coated With Lead Square From: 651,895 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MHDH445 4-Flute Square-End Mill for High-Hardness
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Achieves stable and long lifespan even during long-time machining in the high hardness region (48 to 65 HRC).・ Pursue the shape of the flute and improve the amount of tilt and machining precision.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 4 2 ～ 8 - 6 4 60 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] Powerful Torsion (45°-60°) Plane / Side / Groove / Inclined Cuts For High Hardness (Silicon Group) With Lead Square From: 1,174,022 VND Days to Ship: Số ngày giao hàng: 9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
MX435 MUGEN-COATING 4-Flute LEAD 35 End Mill
NS TOOL
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The flute length is 3 times the cutting diameter and features a 35° helix angle.・ Eliminates the problem that the 2 × D flute length is not enough and the 4 × D flute length is long.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 1 ～ 12 3 ～ 36 - 4 ～ 12 4 45 ～ 80 general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN With Lead Square From: 577,962 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ An end mill dedicated to counter boring. It can be used not only for drilling counterbore holes for hex bolts, but also as a pre-machining tool for drilling on slopes.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 20 8 ～ 38 - 6 ～ 20 2 50 ～ 125 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] Weak torsion (15 to 25˚) Countersinking TiAlN With Lead Square From: 1,544,642 VND Days to Ship: Số ngày giao hàng: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Stainless Steel Unequal Lead End Mill, Regular, 4-Flute RF100VA 3800
GUHRING
Designed especially for use with stainless steel. Offers excellent extraction of cutting chips, helping ensure stable machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 6 ～ 25 13 ～ 45 21 ～ 65 6 ～ 25 4 57 ～ 121 - Variable lead - - - Square From: 1,450,746 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
4-Flute Square End Mill (TS-EML)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 12 9 ～ 40 - 6 ～ 12 4 60 ～ 110 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts HS - Square From: 644,427 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 10 22 - 10 5 70 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] Standard torsion (30-40°) Plane / Side / Groove / Inclined Cuts TiAlN - Long-Neck Square From: 1,399,750 VND Days to Ship: Số ngày giao hàng: 6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
![Square End Mill [4HPE (HPE4000)]](//vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455891.jpg?$product_view_b$)
Square End Mill [4HPE (HPE4000)]
HANSONG M&T
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 0.8 ～ 20 1.6 ～ 45 - 3 ～ 20 4 45 ～ 100 - 30° - TiSiN - Square From: 873,272 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Anti-Vibration Stub Carbide End Mill_AE-VMSS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ It has excellent lubricity, abrasion resistance, and high temperature oxidation resistance due to The DUARISE coating, and the composite multilayer structure suppresses thermal cracks. Also, the smoothing of the coating surface improves machining surface precision.・ The positive-flute shape that has excellent sharpness reduces cutting force.A grooved form that achieves both tool rigidity and chip discharge performance enables stable machining and suppresses burrs.・ Variable-lead and unequal division enable stable, high-efficiency machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 3 ～ 12 4.5 ～ 18 - 6 ～ 12 4 45 ～ 75 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Variable lead Side / Groove / Inclined Cuts - - Square From: 566,666 VND Days to Ship: Số ngày giao hàng: 17 Day(s) or more
17 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
XAC series carbide square end mill, 4-flute / short model
MISUMI
[Specification]·Standard TiAlN coating
- Volume Discount
- TiAlN
- General Steel
- 4 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Underneck length (ℓ1)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Torsion Angle (θ) Machining Application Coating Blade tip shape Type 2 ～ 20 6 ～ 38 - 4 ～ 20 4 40 ～ 105 general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Standard torsion (30-40°) Plane / Side / Inclined Cuts TiAlN Sharp Edge Square From: 384,307 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
![Square End mill [4SUE]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456320.jpg?$product_view_b$)
![Square End Mill [4APE (APE4000)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456128.jpg?$product_view_b$)
![Square End Mill [4HPE (HPE4000)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455891.jpg?$product_view_b$)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Square End mill [4SUE]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456320.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list. ![Square End Mill [4APE (APE4000)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012456128.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Square End Mill [4HPE (HPE4000)]](http://vn.misumi-ec.com/linked/material/fs/AVQ1/PHOTO/223012455891.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | MISUMI | NACHI(FUJIKOSHI) | MISUMI | OSG | YG 1 | OSG | HANSONG M&T | NS TOOL | OSG | NS TOOL | OSG | OSG | HANSONG M&T | MISUMI | MISUMI | OSG | OSG KOREA CORP | KABUSYUUKOUGU | NACHI(FUJIKOSHI) | OSG KOREA CORP | YG 1 | THE CUT | MISUMI | MISUMI | OSG | OSG | NS TOOL | NS TOOL | NS TOOL | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | NS TOOL | NS TOOL | NS TOOL | OSG | GUHRING | OSG KOREA CORP | YG 1 | HANSONG M&T | OSG | MISUMI |
| Product SeriesDòng sản phẩm | XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model | XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model | Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_FX-MG-EMS | Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE | Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS | (Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model | Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS | XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model | XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model | Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS | XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model | Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model | VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model) | ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS | Stainless Steel Unequal Lead End Mill, Regular, 4-Flute RF100VA 3800 | ||||||||||||||||||||||||||||
| CADCAD | |||||||||||||||||||||||||||||||||||||||||||||
| From | 540,666 VND | 285,000 VND | 400,120 VND | 558,000 VND | 954,600 VND | 1,694,478 VND | 1,920,376 VND | 921,041 VND | 483,333 VND Special Price On Sale Till 31/03/2025 | 428,333 VND Special Price On Sale Till 31/03/2025 | 868,116 VND | 671,026 VND Special Price On Sale Till 31/03/2025 | 1,167,530 VND | 572,324 VND | 395,788 VND | 840,386 VND | 415,957 VND | 541,798 VND | 366,803 VND | 275,205 VND | 1,429,954 VND | 866,943 VND | 379,275 VND | 1,119,727 VND | 820,745 VND | 680,058 VND Special Price On Sale Till 31/03/2025 | 589,568 VND | 589,568 VND | 7,053,773 VND | 651,895 VND | 1,174,022 VND | 577,962 VND | 1,544,642 VND | 1,450,746 VND | 644,427 VND | 1,399,750 VND | 873,272 VND | 566,666 VND | 384,307 VND | ||||||
| Days to ShipSố ngày giao hàng | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | 10 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | Same day or more | Same day or more | 7 Day(s) or more | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | 4 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | Same day or more | 7 Day(s) or more | Same day or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | Same day or more | 5 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) | 7 Day(s) or more | 17 Day(s) or more | 4 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật |
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 1 ～ 20 | 1 ～ 18 | 1 ～ 20 | 0.1 ～ 30 | 1 ～ 20 | 3 ～ 12 | 1 ～ 20 | 0.5 ～ 11.9 | 2 ～ 30 | 1 ～ 12 | 0.2 ～ 12 | 1 ～ 30 | 2 ～ 20 | 0.1 ～ 20 | 3 ～ 12 | 3 ～ 16 | 1 ～ 25 | 6 ～ 20 | 1 ～ 20 | 0.1 ～ 25 | 1 ～ 16 | 1 ～ 30 | 0.1 ～ 20 | 0.5 ～ 12 | 0.1 ～ 12 | 0.2 ～ 30 | 1 ～ 12 | 0.1 ～ 12 | 1 ～ 20 | 1.5 ～ 16 | 3.15 ～ 19.99 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 13 ～ 25 | 0.5 ～ 12 | 1 ～ 4 | 1 ～ 12 | 3 ～ 20 | 6 ～ 25 | 2 ～ 12 | 10 | 0.8 ～ 20 | 3 ～ 12 | 2 ～ 20 |
| Blade length (ℓ)(mm) | 3 ～ 60 | 2.5 ～ 32 | 2 ～ 40 | 0.2 ～ 60 | 3 ～ 115 | 8 ～ 26 | 2.5 ～ 40 | 2.5 ～ 59.5 | 6 ～ 45 | 1.5 ～ 18 | 0.8 ～ 48 | 2.5 ～ 45 | 6 ～ 45 | 0.3 ～ 60 | 12 ～ 30 | 8 ～ 32 | 2.5 ～ 45 | 24 ～ 75 | 4 ～ 80 | 0.2 ～ 45 | 2.5 ～ 40 | 2.5 ～ 55 | 0.2 ～ 40 | 2 ～ 48 | 0.15 ～ 18 | 0.4 ～ 45 | 3 ～ 36 | 0.15 ～ 30 | 4 ～ 80 | 3.75 ～ 40 | 3.5 ～ 48 | 4 ～ 80 | 2.5 ～ 50 | 2 ～ 40 | 40 ～ 67 | 1 ～ 24 | 2 ～ 8 | 3 ～ 36 | 8 ～ 38 | 13 ～ 45 | 9 ～ 40 | 22 | 1.6 ～ 45 | 4.5 ～ 18 | 6 ～ 38 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | 3 ～ 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 21 ～ 65 | - | - | - | - | - |
| Shank diameter (d)(mm) | 4 ～ 20 | 3 ～ 20 | 4 ～ 20 | 4 ～ 32 | 6 ～ 20 | 6 ～ 12 | 6 ～ 20 | 4 ～ 12 | 4 ～ 32 | 4 ～ 12 | 4 ～ 12 | 4 ～ 32 | 6 ～ 20 | 3 ～ 20 | 6 ～ 12 | 6 ～ 16 | 6 ～ 25 | 6 ～ 20 | 4 ～ 20 | 4 ～ 25 | 6 ～ 16 | 4 ～ 32 | 3 ～ 20 | 4 ～ 12 | 4 ～ 12 | 3 ～ 32 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 16 | 6 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 20 | 12 ～ 25 | 4 ～ 12 | 6 | 4 ～ 12 | 6 ～ 20 | 6 ～ 25 | 6 ～ 12 | 10 | 3 ～ 20 | 6 ～ 12 | 4 ～ 20 |
| Number of flutes(sheet) | 4 | 4 | 4 | 2 | 3 | 4 | 4 | 2 | 4 | 3 | 2 | 4 | 4 | 2 | 4 | 3 | 4 | 6 | 4 | 2 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 4 | 4 | 2 | 2 | 4 | 4 | 2 | 4 | 4 | 5 | 4 | 4 | 4 |
| Overall Length (L)(mm) | 45 ～ 130 | 38 ～ 100 | 40 ～ 110 | 45 ～ 140 | 40 ～ 200 | 60 ～ 90 | 50 ～ 100 | 40 ～ 110 | 40 ～ 125 | 45 ～ 80 | 45 ～ 100 | 40 ～ 125 | 45 ～ 100 | 40 ～ 110 | 50 ～ 90 | 50 ～ 100 | 40 ～ 120 | 75 ～ 150 | 40 ～ 140 | 40 ～ 120 | 50 ～ 100 | 40 ～ 130 | 40 ～ 110 | 45 ～ 100 | 45 ～ 75 | 40 ～ 125 | 45 ～ 90 | 45 ～ 80 | 50 ～ 140 | 45 ～ 105 | 40 ～ 105 | 60 ～ 200 | 40 ～ 100 | 40 ～ 100 | 100 ～ 140 | 40 ～ 75 | 60 | 45 ～ 80 | 50 ～ 125 | 57 ～ 121 | 60 ～ 110 | 70 | 45 ～ 100 | 45 ～ 75 | 40 ～ 105 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | - | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | - | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | - | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] | - | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Variable lead | 43° | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | 30° | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Variable lead | Standard torsion (30-40°) | Standard torsion (30-40°) | 30° | Variable lead | Standard torsion (30-40°) |
| Machining Application | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove / Inclined Cuts | - | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | - | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Countersinking | - | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | - | Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts |
| Coating | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Non-Coated | - | TiAlN | Non-Coated | For General Steels (AlCrN, etc.) | Non-Coated | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | Non-Coated | FX | TiAlN | TiAlN | FX | AlTiN | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | Non-Coated | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | Non-Coated | - | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | TiAlN | TiAlN | - | HS | TiAlN | TiSiN | - | TiAlN |
| Blade tip shape | Sharp Edge / With Lead | Sharp Edge | Sharp Edge / With Lead | Sharp Edge | - | - | - | With Lead | Sharp Edge | With Lead | With Lead | Sharp Edge / With Lead | - | Sharp Edge / With Lead | Sharp Edge | With Lead | - | - | With Lead | - | - | - | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | - | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | - | - | - | - | - | Sharp Edge |
| Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.8
-
14～14.8
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.80
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.80
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.80
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.80
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.80
- 47
- 47.2
- 47.5
- 47.6
- 47.80
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.50
- 60
- 60.50
-
63
-
64
-
65
-
67
-
70～70.50
- 70
- 70.50
-
75
-
80
-
83
-
85
-
90
-
95
-
100
-
103
-
110
-
115
-
120
-
130
-
150
-
180
-
200
[4-60/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
-
Blade tip shape
-
Type
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy