Square Connectors（Connection direction：Straight Page2）

3M^TM Miniature Delta Ribbon (MDR) System Receptacles

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.▪ EMI/ESD countermeasure items.· Tough structure based on a die-cast lock stand.• M2.5 is also available for fixed screw sizes corresponding to ISO standards.· Products equipped with a ground lock are available to streamline the pre-soldering of temporary mountings and ground processing.

CK / CKS Small Screw Type and Spring Type 10A / 250 V Insert

ILME

CK / CKS Small screw type / spring type, 10A / 250 V, Insert[Features]・CK/CKS.・Small screw type / spring type.▪ 10A/250 V insert

Solder/Machine Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with adoption of machine contacts, dimple processing and plated pin finishing

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

Centronics Solder Screw-lock Connector (Panel Mountable Female)

MISUMI

Panel Mount Centronics Connector with Screw-lock

• Volume Discount

• Connection between Boards
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

Centronics Press-fit Spring-lock Connector (Male)

MISUMI

Labor-saving Pressure Welding Spring-lock Male Connector

• Volume Discount

• For Signal
• Connection in Boards
• Printer
• Pressure Welding
• Gold Plated

CAD ：

2D

HE Series, Universal Connector

WEIDMULLER

A 6-pole connector with multiple connection methods (500 V, 24 A, number of poles: 6 (+ PE), screw / spring / crimp / push-in)

1.27‑mm Pitch Two-Piece Connectors, HIF6 Series

HIROSE ELECTRIC

Board-to-board and board-to-cable connection variations available. Uses a flat-type cable with 1.27-mm pitch, so it can be used with each type of connector.[Features]・Product variation: connection methods include board-to-board model and cable pressure connection.・Wide range of use: using flat-type cable with 1.27-mm pitch, it can be used with HIF2E, HIF3B, HIF5, etc.・Compatible cables: AWG#28 flat cable (7/0.127 mm, outer diameter 0.8 - 1.0 mm).・Construction that prevents mis-insertion: mis-insertion prevention guide prevents accidental insertion.

HIF3F Series 2.54‑mm Pitch Box Type Pin Header

HIROSE ELECTRIC

This box type pin header is constructed to prevent reverse insertion. Able to be mated with HIF3B series sockets.[Features]▪ Reverse insertion prevention: pin header equipped with a HIF3E series connector portion protector wall to prevent reverse insertion.▪ Compatibility: pin header compatible with HIF3B series.

Discrete Wire Connector for Connection, DF3 Series (2 mm Pitch)【1-100 Pieces Per Package】

HIROSE ELECTRIC

Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

MX23A Series, Contact

JAPANAVIATION

[Features]· A small low-profile connector, which can be widely used in vehicles, motor bikes and other types of waterproof equipment.

CDA/CDC Common Use Screw Type and Crimp Type 16A / 250V Insert

ILME

CDA/CDC, Common use screw type and crimp type, 16A / 250V, insert[Features]・CDA/CDC.・General-use screw type, crimp type.▪ 16A / 250V insert

MIL Socket Pressure Welding Contact Female Connector (with Lock)

MISUMI

[Features]This is a space saving OMRON IDC connector. A new type of MIL socket connector with a locking lever built into the main body of female connector. Compared to conventional MIL socket connectors, it is easy to operate because it can be inserted and removed with one hand, making it suitable for use in locations where insertion and removal are frequent.

• Volume Discount

• UL
• MIL
• For Signal
• Space-saving
• Pressure Welding
• Lever Lock

MIL Connector PCB Straight Male Connector (BOX Model)

MISUMI

[Features]OMRON BOX type MIL straight male connector for circuit board mounting. It can be used for circuit boards of various factory automation equipment. Compared to circuit board mounting male connectors with levers, this connector is much smaller as it has no lever, making it very convenient for circuit board wiring in small devices. The widely used 2.54 mm pitch arrangement makes it compatible with commercially available universal circuit boards, etc.

• Volume Discount

• UL
• MIL
• Solder

CAD ：

2D

Centronics EMI Countermeasure Spring-lock Press-fit Connector (Female)

MISUMI

57F Series Noise Countermeasure Product Centronics Female Connector

• Volume Discount

• Pressure Welding
• Gold Plated

CAD ：

2D

Han Waterproof A-Model Connector (Screw Connection)

MISUMI

A Model Connector

• Volume Discount

• UL
• CSA
• CE-Compliant
• For Power Supply
• For Signal
• Connection between Boards
• Screw Type
• Insertion
• Silver-Plated

CAD ：

2D

2.5‑mm Pitch Connector For Discrete Wire Connection, HNC Series

HIROSE ELECTRIC

A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.[Features]・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.・Thin type: mount height when used at a right angle: 4.8 mm.・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.・Further, there are settings available to provide a light feel even if tin plating is used.

D-Sub Connector Plug Case (Product With EMI Measures), CTH Series

HIROSE ELECTRIC

These are EMI-shielded plug cases for D-sub connectors. • Because the ABS resin is plated, the connectors are lightweight, sturdy, and provide improved electromagnetic shielding.[Features]· Because the lock mechanism is a screw type mechanism it is rugged and reliable.· Because the material properties call for plating a tough ABS resin, the resin is lightweight, solid, and provides an improved electromagnetic wave shielding effect.· In order to improve the shield effect, the cable clamp is secured using 2 types of clamps on the shield part and the clamp has a configuration for pinching the plug cases together.• Use screws to ground the drain wire of the cable with a clamp.• Easily incorporated using solder (HD type), pressure contact (FD*D type) or crimping (CD type).• For FD*D, however, wire a fused I/O cable when using the case.• CTH-type plug cases use UL94HB ABS resin and the plating conforms to the UL746C standard.

D-Sub Connector (Ribbon Cable Insulation Displacement Connection Type) FD Series

HIROSE ELECTRIC

A ribbon/cable pressure connection type D-sub connector. As a 1.27-mm pitch ribbon cable is optimal, it can be used in combination with other connectors.[Features]· Has a metal shell and so is small and lightweight.· Connector mounting can be performed on the chassis, front or back, or one of the sides.· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.· As the cable pitch at the pressure attachment site is a standard 1.27 mm, a normal ribbon cable can be easily connected.· The purpose of pressure connections is the ability to make easy connections with the same purpose as other ribbon cable connectors.· A connection press can also be used.

Half Pitch Interface Connector, DX Series

HIROSE ELECTRIC

I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.

Mini Delta Ribbon (MDR) System Wiremount Solder Plug

3M

[Features]· The MDR system consists of “industry standard product” half pitch I/O connectors.· Use of pre-loaded cantilever contacts ensures high reliability, requires little insertion and withdrawal strength and prevents twisting.· Accommodates a wide range of cable sizes from AWG#24 to AWG#30.· Solder wiring method that does not require special jigs or tools.· Solder heat resistance of 360°C for 10 seconds comparable to conventional connectors.· Unique contact shape that takes soldering workability into consideration.[Applications]· For cable connections between equipment.· Accommodates a wide range of cable sizes and ideal for solder wiring without special jigs or tools.

Han Q Series Connector (Crimp Connection)

HARTING

This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).

[Enclosure]C Type IP66, Rotary Lever Series

ILME

Ilme's traditional lever C typeIt is a standard enclosure of Ilme connector.A uniquely developed rotary lever enables smooth attachment and detachment.Stainless steel levers and springs ensure safe and secure fitting and airtightness.The manufacturer will flexibly respond to various on-site needs with the manufacturer's wide lineup.Further notes: It is a slim type that contributes to the miniaturization of equipment and supports all connection types.

Misumi, Waterproof, E-Model Connector (Crimp Wire Connection)

MISUMI

[Features]MISUMI's original, low-cost, environment-resistant, and waterproof E-type connector. It is a highly reliable crimp connection that can shorten the work time. Fully compatible with products from major connector manufacturers. Please check the male or female before ordering.

• Volume Discount

• UL
• IP65
• For Power Supply
• For Signal
• Connection between Boards
• Connection in Boards
• Screw Type
• Insertion
• 2DCAD
• Silver-Plated

CAD ：

2D

Solder and Machine Contact D-Sub Connector (High Current)

MISUMI

Made by ERNI in Germany. High-current capacity model supporting up to 20 A

• Volume Discount

• For Power Supply
• Connection between Boards
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

MIL connector IDC female connector (no lock)

MISUMI

[Features]This is a female connector that allows for batch IDC together with 1.27 mm pitch ribbon cable. It is a lead-free type that takes into consideration the global environment. A standard MIL connector that is compliant with the MIL standard (MIL-C-83503) and UL-certified.

• Volume Discount

• UL
• MIL
• For Signal
• Connection between Boards
• Solenoid Valve
• PLC
• Pressure Welding
• Gold Plated

PCR Half Pitch Female Press-fit Connector

MISUMI

Half-pitch model PCR Pressure Welding Model Connector

• Pressure Welding
• Gold Plated

CAD ：

2D

Han Waterproof D-Model Connector (Crimped Connection)

MISUMI

D Model Connector

• Volume Discount

• UL
• CSA
• CE-Compliant
• For Power Supply
• For Signal
• Connection between Boards
• Caulking
• Insertion
• Silver-Plated

CAD ：

2D

HA Series Slim Connector

WEIDMULLER

A slim type internal connector with which the wiring method can be selected (250 V, 22 A / 16 A, number of poles: 10 / 16 / 32 / 48 (+ PE))

PCS Series Cases

HONDA TSUSHIN KOGYO

Rectangular connector case for 1.27 mm pitch high density interface.[Features]·Vertical case for standard cable of PCS series·Robust with metal shell + metal case, ideal for interfaces·For FCC and other EMI countermeasures[Applications]·Various compact equipment such as office equipment, communication, measurement, factory automation.

2.54-mm Pitch Low Profile Connector, HIF3FB and HIF3FC Series

HIROSE ELECTRIC

A 2.54-mm pitch RoPro file board-to-board (stacking or perpendicular) and board-to-cable connector.[Features]・Prevents flux oozing: HIF3FC series straight type connectors have methods in place to prevent flux oozing.・Low profile: pin heads are at a low height of 9.2 mm.・The space between circuit boards when stacking is 12.2 mm.

D-sub Connector Plug Case (Plastic Type), CTF Series

HIROSE ELECTRIC

These are resin cases for D-sub connectors. Screw locks make them sturdy and secure.[Features]· Because the lock mechanism is a screw type mechanism, it is rugged and reliable.• Made of strong ABS resin, so they are lightweight and sturdy.• The plastic cases are divided at the center part of the cable guiding passage, making them easy to assemble and maintain, and requiring fewer screws.• Locking brackets are available in either rectangular or hex formats to match the way the panel is mounted.• 25-contact models are plug cases for modems as defined in JIS-C-6361.• Easily incorporated using solder (HD type) or crimping (CD type).

D-Sub Connector (Ribbon Cable IDC Termination, Low-Profile), FDD Series

HIROSE ELECTRIC

A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.[Features]• Metal shell makes it compact and sturdy.• Connectors can be mounted on the chassis, or on the front or back sides of the panel.• Height of the wiring side is greatly reduced to facilitate more compact sets.· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.• Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)• Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.

Small, Rectangular Interface Connector, 3200 Series

HIROSE ELECTRIC

This is an interface connector with an implementation height of 2.9 mm, a low profile, small size, and a lock included.[Features]• A receptacle connector board implementation surface with a height of the 2.9 mm.• The contact pitch is an incredibly small 0.8 mm, and only a small area is required for mounting.• This circuit board implementation method has a pitch of just 0.8 mm using the SMT method, so implementation is easy.• This receptacle connector can also be prepared in an embossed packaging product format.• This receptacle connector has a metal shell structure used for the mold cover, providing the ideal protective measures for ESD.• A latch lock is applied to both sides for mating processes.• This lock is implemented with the minimum space possible, and helps downsize your product set.• Choose from 0.5, 1, or 1.5 mm for the circuit board thickness and support fittings length.• The wire connection of this plug connector use a solder attachment type applicable to all types of wires.• The number of pins available is either 8 or 10.

QE Series

JAPANAVIATION

Using a metallic outer shell, this square connector is fitted using a lever.[Features]· Hard-type with metallic shell. Structure that is resistant to vibrational impact due to a lever lock (original type).・A mismatch prevention key is included in the shell to prevent mistaken and reverse mating. By using the location setting post and key sold separately, 16 mismatch prevention patterns can be created.・Also compatible with WV0/WL1 and other specialized railroad cables.・3 cable-side plugs are provided to match the wires being used or the work being performed.Original type: with lever lock mechanismQE-A type: by enlarging the lever portion, this type is reinforced with a lever to prevent warping and other changes that occur during use.QE4 Type: by scaling up the shell wire pullout opening and cable clamp diameter, cables with large outer coverings can now be accommodated with ease.・Other than the original type, there is an enlarged mating shell and an enhanced shell to prevent prying and reverse mating on the panel side receptacle, as well as a noise reducing ferrite attached to the insulator. There are 3 types that include ferrite.・The panel side receptacle is compatible with both electric wire crimp connection contact and circuit board through hole connection contact (pin contact) types.・The shell type can be disassembled and rearranged for simple modification during circuit changes and incorrect wiring.

3M^TM SCR Connector Wire Mount Plug

3M

[Features]・ Bellows type contacts with excellent twisting force and vibration resistance・ Achieves both miniaturization and support for large diameter cables with a contact pitch of 2-mm and a special solder tail arrangement・ 0.75 mm2 cable can be connected to all contacts・ Unique contact shape considering soldering workability[Applications]・ 2.0-mm pitch I/O connector for cable connection between devices for combination with a dedicated shell kit

3M^TM Mini-Camera Link Standard-Compliant PCB Mount Connector Receptacle

3M

[Features]· A board mounting connector receptacle—compatible with the Mini-Camera Link standard.

Miniature Delta Button (MDR) System Wire Mount Receptacle

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.▪ EMI/ESD countermeasure items.· Wired to 1.27-mm pitch flat cable by bulk pressure welding connection. Supports daisy chain connections by intermediate pressure welding connection.· Tough structure based on a die-cast lock stand.• M2.5 is also available for fixed screw sizes corresponding to ISO standards.

Han D / DD Series Connector (Crimp Connection)

HARTING

Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Crimp connection for reliable connection (Models are separated using "-" rather than spaces).

CRC (Compact Robot Connector) (51238)

MOLEX

A Molex connector which support currents of 7.0 to 15.0 A. Maximum number of pins: 50. Optimal for industrial robots and FA applications (compatible housings: 51234/55836)

CRC™ (Compact Robot Connector) (55836)

MOLEX

Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Optimal for commercial robots and FA-related applications (mating housing: 54333/54334)

D-Sub Connectors XM3-L/XM2-L/XM4K/XM4L

OMRON

[Features]・ This D-sub connector series has been renewed with lead-free compatible products.・ The fastening screw diameter can be identified from its external appearance.・ A solution to problems associated with combining fasteners has been found.・ Shielded connectors for EMI countermeasures.▪ This is a UL standard (File No.E103202) certified product (except for XM4Z type).

Screw-lock/Press Contact D-sub Connector (with Integrated Terminal Block)

MISUMI

Hood with integrated screw model terminal that allows for repeated connecting with a single driver

• Volume Discount

• For Signal
• PLC
• EMI Countermeasure
• RS422
• RS232
• Screw Type
• Gold Plated
• Screw Lock

CAD ：

2D

MIL Press-fit Male Extension Connector

MISUMI

[Features]This is a male connector for IDC relay, manufactured by Hirose Electric. This is an IDC type connector that allows for batch IDC together with 1.27 mm pitch ribbon cable and wire-to-wire connection with MIL standard connectors (HIF3 B connectors). Since it has a locking mechanism after joining, it will not come off even if some pulling force is applied.

• Volume Discount

• UL
• MIL
• Caulking
• Gold Plated
• Lever Lock

CAD ：

2D

FCN connector Solder type female connector

MISUMI

Mitsubishi Electric / Omron / Fuji Electric PLC Connector

• Volume Discount

• Solder
• Gold Plated
• Screw Lock

PCR Series Case

HONDA TSUSHIN KOGYO

This is a PCR series case.[Features]· A wide range of cores of 20 to 96 are available from the board to the cable.· For EMI measures other than FCC.· A wide range of cores of 20 to 128 are available from board to board.· Products enabling live wire connection (three steps) are available.· Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.· Ideal for connection to horizontal, parallel, and vertical backs.