Stainless Steel Threaded Pipe Fitting Reducing Socket

:
YODOSHI

    Threaded fitting developed for the purpose of supporting low-pressure stainless steel pipes with superior corrosion resistance.
    [Features]
    · A wide range of reducing sizes makes piping easy.
    · Reducing stainless steel threaded pipe fitting socket manufactured by YODOSHI Corporation, a company with a top-class quality and a proven track record in Japan.
    ·Operating fluid: Water, Air, Steam, Chemicals, Oil.
    [Applications]
    ·Threaded fitting used to connect pipes.
    · Mainly used to connect pipes, but with a type where the thread sizes on both sides are different, allowing you to change the piping diameter.

    Drawing

    Stainless Steel Threaded Pipe Fitting Reducing Socket, Drawing

    Product Specification

    Stainless Steel Threaded Pipe Fitting Reducing Socket, Appearance

    Use

    Piping for pulp, petrochemical, chemical industry machinery, pollution control equipment, electric power, textiles, food, medicine, shipbuilding, vehicles, housing, water treatment, water supply and sewerage, semiconductor, etc.

    Product Specification

    The pressure and temperature standards for the product are shown in the table on the right. (JIS B 2308)
    Notes
    1. If the temperature or pressure of the fluid to be used is in the middle of the table on the right, the proportional interpolation method can be used.
    2. The temperature shown in the right table is the temperature of the internal fluid.
    3. Loads, stresses and moments applied during piping are not taken into consideration.
    Temperature (℃)Non-shock maximum allowable working pressure (MPa)
    -20 to +402.00
    1001.65
    1501.50
    2001.40
    2201.35
    * The maximum allowable working pressure for unions and union elbows is 1 MPa.

    ■ The shape and dimensions of the product are manufactured according to the following standards.

    TypeCompatible standard
    Shape and dimensionsCompliant with JIS B 2308 and in-house standards
    ThreadJIS B 0203

    ■ The materials used in our products are based on the following JIS standards.

    Stainless steel castings (JIS G 5121)

    JIS symbolChemical composition (%)
    CSiMuPSNiCRMo
    SCS 130.08 or less2.00 or less2.00 or less0.040 or less0.040 or less8.00 to 11.0018.00 to 21.00-

    Specifications Table

    Unit: mm
    Stainless Steel Threaded Pipe Fitting Reducing Socket, Specification Table

    Usage Example

    (Reference value)
    Stainless Steel Threaded Pipe Fitting Reducing Socket, Tightening Torque

    Note
    1 Number of threads tightened up to the position of the gauge diameter.
    2 Number of threads tightened from the position of the gauge diameter.
    3 Nominal dimensions of 3B or less are for pipe wrenches, and 4B is for a chain pipe wrench.

    Cautions and Prohibitions

    * Be sure to use a liquid sealant for stainless steel.
    * Forcibly screwing it in may cause galling or seizure at the joints, resulting in leaks.
    * Once screwed in, adjusting the pipe angle in the direction of loosening will cause leakage, so avoid doing so.
    If it is unavoidable to unscrew it, do so within 45°.
    In addition, never unscrew the screw after the liquid sealant has hardened.
    *For re-installation, please remove the sealant and apply a new sealant.
    * After completing the piping, be sure to perform a leak testing to confirm that there are no leaks.