(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
Product DetailSpecification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Outer Diameter D (or Male Thread M)(mm)
-
Stroke S(mm)
-
Tip surface treatment
- Black Oxide Coating
- Zinc Plating
-
Vertical Load (Range)(N)
- 0.01~50
- 50.01~100
-
Minimum Load(N)
-
Length L(mm)
-
Tip outer diameter d(φ)
-
Thread Pitch(mm)
-
type
- LSPLL,LSPL,LSPLH
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- Same day
- 12 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Short Spring Plunger (with Long Lock) (LSPL / LSPL / LSPLH)
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 140,075VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
Self-locking type short plungers. Available in three types of load for different screw diameters (excluding certain diameters).
[Features]
· The overall length is short for convenient use in confined spaces.
· Equipped with a self-locking (long-lock) feature.
· Strongly vibration resistant with a high extraction moment.
· Enables precise positioning.
· The self-locking feature is effective for up to approx. 20 install/uninstall cycles.
· The rear surfaces are marked for product identification.
Short Spring Plunger External Appearance
External appearance of LSPLL
External appearance of LSPLH
External Dimensions Of Short Spring Plunger
External dimensions of screw diameter M8 to M16
External dimensions of screw diameter M4 to M6
Short Spring Plunger Main Body Material
| Main Body | Coil Spring | Center Pin | Long Lock |
|---|---|---|---|
| SUM22L Black oxide coating | SWPA | SUM22L Black oxide coating (zinc plating for LSPLL16 only) HRC56 to 60 | Polyamide |
Short Spring Plunger Specifications
| Size | M | d | L | S | W | A | Weight (g) | Moment (N·m) | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Mounting | Removing | |||||||||
| LSPLL LSPL LSPLH | 4 | M4 × 0.70 | 1.8 | 9 | 1.5 | 0.6 | 5 | 0.4 | 0.18 | 0.12 |
| 5 | M5 × 0.8 | 2.4 | 12 | 2 | 0.8 | 6 | 1 | 0.12 | 0.08 | |
| 6 | M6 × 1 | 2.7 | 14 | 1 | 7 | 1.7 | 0.44 | 0.21 | ||
| 8 | M8 × 1.25 | 4 | 16 | 1.2 | 8 | 4 | 1.1 | 0.38 | ||
| 10 | M10 × 1.5 | 4.5 | 19 | 2.5 | 1.6 | 9 | 7 | 1.36 | 0.62 | |
| 12 | M12 × 1.75 | 6 | 22 | 3.5 | 2 | 10 | 13 | 2.11 | 1.41 | |
| 16 | M16 × 2 | 8.5 | 24 | 4.5 | 2.5 | 14 | 29 | 3.99 | 3.05 | |
| For Light Loads (1 Line) | For Medium Loads (No Line) | For Heavy Loads (2 Lines) | |||
|---|---|---|---|---|---|
| Part Number | Load (N) Min To Max | Part Number | Load (N) Min To Max | Part Number | Load (N) Min To Max |
| LSPLL4 | 3 to 10 | LSPL4 | 6 to 20 | - | - |
| LSPLL5 | LSPL5 | LSPLH5 | 9 to 25 | ||
| LSPLL6 | 4 to 10 | LSPL6 | 7 to 20 | LSPLH6 | 11 to 25 |
| LSPLL8 | 7 to 15 | LSPL8 | 15 to 30 | LSPLH8 | 22 to 43 |
| LSPLL10 | 9 to 16 | LSPL10 | 20 to 35 | LSPLH10 | 20 to 54 |
| LSPLL12 | 14 to 26 | LSPL12 | 30 to 55 | LSPLH12 | 36 to 94 |
| LSPLL16 | 22 to 50 | LSPL16 | 45 to 100 | LSPLH16 | 60 to 110 |
Black oxide coating is available as the surface treatment on the LSPLL16 center pin only while stock supplies last. Thank you for your understanding.
| Part Number |
|---|
| LSPL4 |
| LSPL5 |
| LSPL6 |
| LSPL8 |
| LSPL10 |
| LSPL12 |
| LSPL16 |
| LSPLH5 |
| LSPLH6 |
| LSPLH8 |
| LSPLH10 |
| LSPLH12 |
| LSPLH16 |
| LSPLL4 |
| LSPLL5 |
| LSPLL6 |
| LSPLL8 |
| LSPLL10 |
| LSPLL12 |
| LSPLL16 |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Outer Diameter D (or Male Thread M) (mm) | Stroke S (mm) | Tip surface treatment | Vertical Load (Range) (N) | Minimum Load (N) | Max. Load (N) | Length L (mm) | Tip outer diameter d (φ) | Thread Pitch (mm) | Load Identification | Mounting moment (N·m) | Remove moment (N·m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
144,898 VND | 1 Piece(s) | Same day | 10 | 4 | 1.5 | Black Oxide Coating | 0.01~50 | 6 | 20 | 9 | 1.8 | 0.7 | For heavy loads (no line) | 0.18 | 0.12 | ||
147,288 VND | 1 Piece(s) | Same day | 10 | 5 | 2 | Black Oxide Coating | 0.01~50 | 6 | 20 | 12 | 2.4 | 0.8 | For heavy loads (no line) | 0.12 | 0.08 | ||
145,255 VND | 1 Piece(s) | 12 Day(s) | 10 | 6 | 2 | Black Oxide Coating | 0.01~50 | 7 | 20 | 14 | 2.7 | 1 | For heavy loads (no line) | 0.44 | 0.21 | ||
145,475 VND | 1 Piece(s) | 12 Day(s) | 10 | 8 | 2 | Black Oxide Coating | 0.01~50 | 15 | 30 | 16 | 4 | 1.25 | For heavy loads (no line) | 1.1 | 0.38 | ||
152,975 VND | 1 Piece(s) | 12 Day(s) | 10 | 10 | 2.5 | Black Oxide Coating | 0.01~50 | 20 | 35 | 19 | 4.5 | 1.5 | For heavy loads (no line) | 1.36 | 0.62 | ||
378,335 VND | 1 Piece(s) | 12 Day(s) | 10 | 12 | 3.5 | Black Oxide Coating | 0.01~50 | 30 | 55 | 22 | 6 | 1.75 | For heavy loads (no line) | 2.11 | 1.41 | ||
483,525 VND | 1 Piece(s) | 12 Day(s) | 10 | 16 | 4.5 | Black Oxide Coating | 0.01~50 | 45 | 100 | 24 | 8.5 | 2 | For heavy loads (no line) | 3.95 | 3.05 | ||
142,465 VND | 1 Piece(s) | 12 Day(s) | 10 | 5 | 2 | Black Oxide Coating | 0.01~50 | 9 | 25 | 12 | 2.4 | 0.8 | For very heavy loads (2 lines) | 0.12 | 0.08 | ||
145,255 VND | 1 Piece(s) | 12 Day(s) | 10 | 6 | 2 | Black Oxide Coating | 0.01~50 | 11 | 25 | 14 | 2.7 | 1 | For very heavy loads (2 lines) | 0.44 | 0.21 | ||
145,475 VND | 1 Piece(s) | 12 Day(s) | 10 | 8 | 2 | Black Oxide Coating | 0.01~50 | 22 | 43 | 16 | 4 | 1.25 | For very heavy loads (2 lines) | 1.1 | 0.38 | ||
152,975 VND | 1 Piece(s) | 12 Day(s) | 10 | 10 | 2.5 | Black Oxide Coating | 0.01~50 | 20 | 54 | 19 | 4.5 | 1.5 | For very heavy loads (2 lines) | 1.36 | 0.62 | ||
378,335 VND | 1 Piece(s) | 12 Day(s) | 10 | 12 | 3.5 | Black Oxide Coating | 0.01~50 | 36 | 94 | 22 | 6 | 1.75 | For very heavy loads (2 lines) | 2.11 | 1.41 | ||
483,525 VND | 1 Piece(s) | 12 Day(s) | 10 | 16 | 4.5 | Black Oxide Coating | 50.01~100 | 60 | 110 | 24 | 8.5 | 2 | For very heavy loads (2 lines) | 3.95 | 3.05 | ||
140,075 VND | 1 Piece(s) | 12 Day(s) | 10 | 4 | 1.5 | Zinc Plating | 0.01~50 | 3 | 10 | 9 | 1.8 | 0.7 | For light loads (1 line) | 0.18 | 0.12 | ||
142,465 VND | 1 Piece(s) | 12 Day(s) | 10 | 5 | 2 | Zinc Plating | 0.01~50 | 3 | 10 | 12 | 2.4 | 0.8 | For light loads (1 line) | 0.12 | 0.08 | ||
145,255 VND | 1 Piece(s) | 12 Day(s) | 10 | 6 | 2 | Zinc Plating | 0.01~50 | 4 | 10 | 14 | 2.7 | 1 | For light loads (1 line) | 0.44 | 0.21 | ||
145,475 VND | 1 Piece(s) | 12 Day(s) | 10 | 8 | 2 | Zinc Plating | 0.01~50 | 7 | 15 | 16 | 4 | 1.25 | For light loads (1 line) | 1.1 | 0.38 | ||
152,975 VND | 1 Piece(s) | 12 Day(s) | 10 | 10 | 2.5 | Zinc Plating | 0.01~50 | 9 | 16 | 19 | 4.5 | 1.5 | For light loads (1 line) | 1.36 | 0.62 | ||
378,335 VND | 1 Piece(s) | 12 Day(s) | 10 | 12 | 3.5 | Zinc Plating | 0.01~50 | 14 | 26 | 22 | 6 | 1.75 | For light loads (1 line) | 2.11 | 1.41 | ||
483,525 VND | 1 Piece(s) | 12 Day(s) | 10 | 16 | 4.5 | Zinc Plating | 0.01~50 | 22 | 50 | 24 | 8.5 | 2 | For light loads (1 line) | 3.95 | 3.05 |
Loading...Tải…
Basic InformationThông tin cơ bản
| Tip material | Steel | Body Material | Steel | Mounting Method | Screw-In |
|---|---|---|---|---|---|
| Stop loosening | Presence | Spring Plunger Type | Spherical Surface | Wrench Hole Shape | Flathead |
| Main Body Surface Treatment | Black Oxide Coating | Tip heat treatment | Carburized | Heat Resistant Temperature(℃) | 80 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
MISUMI Contact
TALK ID : Misumi_vn
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy