Rotating Element Piping, Rotary Joint, Straight
:
PISCO
One-touch fitting for swinging part and rotating part.
Specifications Of Rotary Joint - Straight
Appearance of Rotary Joint - Straight
Dimensional drawing of Rotary Joint - Straight
| Format | Tube Outer Diameter øD | R | A | B | L | øP | Tube End C | Hex H | Allowable Rotational Speed (min-1) | Rotational Torque (N·cm) | Effective Cross-Sectional Area (mm2) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RC4-M5 | 4 | M5 × 0.8 | 3 | 32.6 | 29.6 | 10 | 16.1 | 12 | 500 | 0.6 | 1.9 | 13 |
| RC4-M6 | M6 × 1 | 4 | 33.6 | 4.2 | ||||||||
| RC4-01 | R1/8 | 8 | 34.1 | 30.1 | 3.6 | 14 | ||||||
| RC6-M5 | 6 | M5 × 0.8 | 3 | 36.2 | 33.2 | 12.5 | 17.2 | 14 | 500 | 1.2 | - | 19 |
| RC6-M6 | M6 × 1 | 4 | 37.2 | 4.5 | ||||||||
| RC6-01 | R1/8 | 8 | 36.9 | 32.9 | 9 | 18 | ||||||
| RC6-02 | R1/4 | 11 | 38.9 | 32.8 | 23 | |||||||
| RC8-01 | 8 | R1/8 | 8 | 45.3 | 41.3 | 14.5 | 18.9 | 17 | 400 | 1.5 | 20 | 34 |
| RC8-02 | R1/4 | 11 | 44.3 | 38.3 | 32 | |||||||
| RC8-03 | R3/8 | 12 | 38 | 39 | ||||||||
| RC10-01 | 10 | R1/8 | 8 | 55.8 | 51.8 | 17.8 | 20.2 | 22 | 300 | 2 | 35 | 68 |
| RC10-02 | R1/4 | 11 | 58.8 | 52.8 | 74 | |||||||
| RC10-03 | R3/8 | 12 | 56.8 | 50.5 | 70 | |||||||
| RC10-04 | R1/2 | 15 | 59.3 | 51.1 | 86 | |||||||
| RC12-02 | 12 | R1/4 | 11 | 61.9 | 55.9 | 20.8 | 23.4 | 24 | 250 | 2.5 | 50 | 94 |
| RC12-03 | R3/8 | 12 | 62.4 | 56.1 | 95 | |||||||
| RC12-04 | R1/2 | 15 | 54.2 | 102 | ||||||||
| RC1/4-01 | 1/4 | R1/8 | 8 | 39 | 35 | 12.5 | 17.2 | 14 | 500 | 1.2 | 9 | 18 |
| RC1/4-02 | R1/4 | 11 | 41 | 34.9 | 23 | |||||||
| RC5/16-01 | 5/16 | R1/8 | 8 | 45.3 | 41.3 | 14.5 | 18.9 | 17 | 400 | 1.5 | 20 | 34 |
| RC5/16-02 | R1/4 | 11 | 44.3 | 38.3 | 32 | |||||||
| RC5/16-03 | R3/8 | 12 | 38 | 39 | ||||||||
| RC3/8-03 | 3/8 | R3/8 | 12 | 56.8 | 50.5 | 17.8 | 20.2 | 22 | 300 | 2 | 35 | 71 |
| RC3/8-04 | R1/2 | 15 | 59.3 | 51.1 | 86 |
- *1. Taper thread type L dimensions are reference dimensions after tightening with screws.
- *2. Number of revolutions per minute
How To Attach And Detach The Connecting Part
1. Attaching the tube
The Rotary Joint (one-touch fitting) allows the tube to be secured with a lock claw by simply inserting the tube all the way to the end, while an elastic sleeve seals the outside of the tube. Refer to the manufacturer's catalog when attaching the tube.
2. Detaching the tube
Push the release ring to open the lock claw and pull out the tube. Be sure to turn off the air before detaching the tube.