What brand is the linear bearing of FA?

The linear bearing of FA is MISUMI brand.

What is the difference between the single liner type and the double liner type of linear bearing of FA?

Single liner type is one row of steel balls, and double liner type is two rows of steel balls. Generally, the length of the double liner type is more than twice that of the single liner type, and the contact area of steel balls is longer, the radial sway is smaller, and the rated load is larger.

Comparison of antirust ability of linear bearings?

Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment. Ordinary bearing steel and stainless steel (SUS440C) are easy to rust, so it is necessary to apply anti-rust oil regularly.

Is there a product stamp on the linear bearing?

There is no stamp on the product body, and the product model is on the packaging box.

When the linear bearing and the guide shaft are used together, some are closely matched, but some have relatively large clearance. Does it affect the use?

The linear bearing and the guide shaft are in point contact and rolling fit through the circulating steel ball structure. Because of point contact and non-interference fit, it is normal to Provided Clearance between the shaft and the bearing, which will not affect the use. The use of this structure greatly reduces the friction resistance and prolongs the service life of the workpiece.

How to deal with oil leakage in the received linear bearing?

Linear bearing is coated with anti-rust oil (except for MX grease device) when leaving the factory, which has little influence on grease. It is recommended to clean it with ultrasonic cleaner or engine oil before use and apply grease after drying.

How much load does linear bearing carry?

For specific load carried, please refer to Load Carried information

Can linear bearing be rotated?

The linear bearing is not suitable for rotating motion in structure. If it is forcibly rotated, it may cause damage to the product. If rotating motion is required, please give priority to linear type rotating bushings.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(26 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

E-LB5UU

Inscribed Circle Dia. dr Overall Length L Outer Cylinder Surface Treatment Outer Dia. D Ball Recirculating Type Eccentricity type Length CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inscribed Circle Dia. dr(Ø)
5

6

8

10

12

13

16

20

25

30

35

40

50
ClearTrống
Overall Length L(mm)
15

19

24

28

29

30

32

35

37

42

45

55

57

59

61

64

70

80

100

112

123

135

151
ClearTrống
Outer Cylinder Surface Treatment
- No Surface Treatment
- Surface Treatment
  - Electroless Nickel Plating
ClearTrống
Outer Dia. D(Ø)
10

12

15

19

21

23

28

32

40

45

52

60

80
ClearTrống
Ball Recirculating Type
- Single
- Double
ClearTrống
Eccentricity(µm)
0.024

0.03

0.035

0.04

0.045

24

30

40
ClearTrống
type
- C-LBM
- E-LB
- E-LBL
- E-LBM
ClearTrống
Length
- Single
- Double
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

8 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Linear Bushings Straight Single / Double

Until 31/12/2024
Volume Discount

Check FAQ of this product (9 items)

Brand :

MiSUMi Economy

Part Number :

E-LB5UU SALE

E-LB6UU SALE

E-LB8UU SALE

E-LB10UU SALE

E-LB12UU SALE

E-LB13UU SALE

E-LB16UU SALE

E-LB20UU SALE

E-LB25UU SALE

E-LB30UU SALE

E-LB35UU SALE

E-LB40UU SALE

E-LB50UU SALE

E-LBM5UU SALE

E-LBM6UU SALE

E-LBM8UU SALE

E-LBM10UU SALE

E-LBM12UU SALE

E-LBM13UU SALE

E-LBM16UU SALE

E-LB5UU

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
Note: When ordering item E-LB**UU, you may receive product with package printed C-LM**UU. This is Misumi's product code convertion only, there is no spec difference between these 2 items

Product Description

Linear Bushings Straight Single / Double
These Linear Bushings are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Features]
● Support Shaft Diameter Minimum/Maximum (mm.): 5 and 50
● Overall Length Minimum/Maximum (mm.): 15 and 151
● Shape : Straight
● Ball Recirculating Type : Single or Double
● Material:
- Housing - SUJ2 Equivalent
- Ball - SUJ2 Equivalent
[Application]
It is used in industrial machinery such as conveyor systems, packaging machines, and robotic equipment.
See more ...

Economy Straight Linear Bushing

Linear bushingDurablePrecise

- Precision straight linear bushing for accurate linear motion.

- High-quality SUJ2 equivalent material for durability.

- Available in various shaft diameters

- Single and double ball recirculating types for different needs.

- Ideal for conveyor systems and robotic equipment.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Linear bearing is a linear type motion guiding mechanism matched with linear guide shaft. The steel ball rolls circularly along the track groove formed by the shell and the retainer, and the linear bearing reciprocates linearly relative to the guide shaft.
Through the rolling of steel ball, high-efficiency movement with low friction resistance can be realized.

Dimensional Drawing

This product is delivered at the initial stage, the color of the packing may be inconsistent with the photo, which shall be subject to the actual product.

Specifications Overview

Type	dr[Φ:mm]	Housing			Ball	Retainer	Operating environment temperature	Accessories
		Material	Hardness	Surface Treatment	Material	Material
C-LM_UU	6~30	Equivalent to SUJ2	58HRC～	－	Equivalent to SUJ2	Resin	-20~80℃	Seal packing Material Nitrile Rubber
E-LB_UU	5~50
E-LBM_UU	6~45			Electroless Nickel Plating

If there are requirements for rust prevention, give priority to MISUMI standard products with surface treatment of electroless nickel plating or those with low temperature hard chromium plating.

Specification Table

		Part Number ( Type ・Diameter ・Length )
		C-LM8UU E-LB6UU

■ Dimension Specification Table

Part Number				O.D. D Tolerance					Overall Length L (Single)		Overall Length L (Double)		B			W	D₁	Eccentricity (maximum)		Number of ball rows	Mass (g)		Basic Rated Load				Double Type Allowable Statice Moment (N・m)
Type	dr	Length	Tolerance		E-LB		E-LBM		L	Tolerance	L	Tolerance	Single	Double	Tolerance			Eccentricity (maximum)			Mass (g)		Single		Double
Type	dr	Length	Tolerance		Single	Double	Single	Double	L	Tolerance	L	Tolerance	Single	Double	Tolerance			Single	Double		Single	Double	C (Dynamic) N	Co (Static) N	C (Dynamic) N	Co (Static) N
E-LB_UU (No surface treatment) E-LBM_UU (Electroless Nickel Plating)	5	UU	+0.003 -0.012	10	0 -0.013	-	0 -0.015	-	15	+0.2 -0.4	-	-	8	-	0 -0.4	1.1	9.6	0.024	-	4	4	-	167	206	-	-	-
	6	UU (Single) LUU (Double)		12		0 -0.015		0 -0.015	19		35	+0.3 -0.6	11.3	24.8			11.5		0.03		8.5	16	206	265	324	529	2.18
	8			15				0 -0.015	24		45		15.3	32.8			14.3				17	31	265	380	431	784	4.31
	10			19	0 -0.015		0 -0.016	0 -0.016	29		55		19.4	41.4		1.3	18				31	62	372	549	588	1100	7.24
	12			21		0 -0.018			30		57		20.4	43.4			20				41	80	412	598	657	1200	10.9
	13			23					32		61		20.4	43.4			22				46	90	510	784	813	1570	11.6
	16			28					37		70		23.3	49.8		1.6	27			5	73	145	775	1180	1230	2350	19.7
	20		+0.003 -0.013	32	0 -0.018	0 -0.021	0 -0.018	0 -0.019	42		80		27.3	57.8		1.6	30.5	0.03	0.04	5	98	180	882	1370	1400	2740	26.8
	25			40					59	+0.2 -0.5	112	+0.3 -0.7	37.3	78.3	0 -0.5	1.85	38			6	236	440	980	1570	1560	3140	43.4
	30			45					64		123		40.8	85.3		1.85	43				262	480	1570	2740	2490	5490	82.8
	35		+0.003 -0.014	52	0 -0.025	0 -0.028	0 -0.023	0 -0.025	70		135		45.3	94.8		2.1	49	0.035	0.045		425	795	1670	3140	2650	6270	110
	40		+0.003 -0.014	60	0 -0.025	0 -0.028	0 -0.023	0 -0.025	80		151		56.3	116.8		2.1	57		0.045		654	1170	2160	4020	3430	8040	147
	50	UU	+0.003 -0.015	80	0 -0.028	-	0 -0.025	-	100		-	-	68.8	-		2.6	76.5		-		1700	-	3820	7940-	-	-	-

If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating.

Specification of "E-LB" corresponds to the spec of "C-LM". Difference between these 2 type is only Part No.

■ Dimension Specification Table

Part Number			D		L		B		W	D₁	Lateral Misalignment (maximum)	Number of ball rows	Weight (g)	Basic Rated Load
Type	dr	Tolerance		Tolerance		Tolerance		Tolerance	W	D₁	Lateral Misalignment (maximum)	Number of ball rows	Weight (g)	C (Dynamic) N	Co (Static) N
C-LM_UU	6	+0.003 -0.012	12	0 -0.013	19	+0.2 -0.4	11.3	0 -0.4	1.1	11.5	0.024	4	7.4	206	265
	8		15	0 -0.013	24		15.3		1.1	14.3			13	265	380
	10		19	0 -0.015	29		19.4		1.3	18			24	372	549
	12		21		30		20.4		1.3	20			27	412	598
	16		28		37		23.3		1.6	27		5	74	775	1180
	20	+0.003 -0.013	32	0 -0.018	42		27.3		1.6	30.5	0.030	5	83	882	1370
	25		40		59	+0.2 -0.5	37.3	0 -0.5	1.9	38		6	206	980	1570
	30		45		64	+0.2 -0.5	40.8	0 -0.5	1.9	43		6	229	1570	2740

If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating or those with low temperature hard chromium plating.

Usage Method

Product Drawings	Instructions for use
	When the linear bearing is under heavy load (unbalanced load), one piece of single liner type is not applicable. It is recommended to use one piece of double liner type or multiple pieces of single liner type.
	Linear bearing is not suitable for rotating motion in structure. If you rotate forcibly, it may cause damage to the product. Please pay attention during use.
	Linear bearing is not suitable for repeated plugging and unplugging.
	When inserting the guide shaft into the linear bearing, please align the center and insert it slowly, otherwise the steel ball will fall off or the retainer will be deformed.

Precautions

■ Regular maintenance:
① Before use, please apply grease to the ball row inside the linear bearing, and then replenish it in due course. Grease forms an oil film on the surfaces of steel ball and rolling surface (guide shaft·bushing) of linear bearing, which effectively reduces friction and prevents sintering. Grease reduction and aging will greatly affect the life of linear bearing.
② Recommended grease: lithium soap grease.
③ Recommended grease filling interval: Usually every 6 months.
When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.

■ Dust prevention measures:
If dust or foreign matter enters the inside of the linear bearing, it may damage the circulation of steel balls, resulting in unexpected failures. When used in harsh environment, please install dust cover and protection cover, etc.

■ MISUMI linear bearing is recommended to be combined with guide shaft with quenching g6 tolerance.

■ MISUMI linear bearing is recommended to be installed on the holder with H7 tolerance. The linear bearing is in clearance fit with the holder.

Related Products

Guide shaft Straight bar type	Linear bearing holder assembly Widened square shape	Linear bearing Standard type Straight type

Typical model: SFJ20-75	Typical model: LHBB8	Typical model: LMU8

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
E-LB5UUSALE
E-LB6UUSALE
E-LB8UUSALE
E-LB10UUSALE
E-LB12UUSALE
E-LB13UUSALE
E-LB16UUSALE
E-LB20UUSALE
E-LB25UUSALE
E-LB30UUSALE
E-LB35UUSALE
E-LB40UUSALE
E-LB50UUSALE
E-LBM5UUSALE
E-LBM6UUSALE
E-LBM8UUSALE
E-LBM10UUSALE
E-LBM12UUSALE
E-LBM13UUSALE
E-LBM16UUSALE
E-LBM20UUSALE
E-LBM25UUSALE
E-LBM30UUSALE
E-LBM35UUSALE
E-LBM40UUSALE
E-LBM50UUSALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Inscribed Circle Dia. dr (Ø)	Overall Length L (mm)	Outer Cylinder Surface Treatment	Outer Dia. D (Ø)	Ball Recirculating Type	Length	Eccentricity (µm)	Basic Load Rating: Dynamic Load (Details) (N)	Basic Load Rating: Static Load (N)	Inscribed Circle Dia. Tolerance (Negative Side) (mm)
62,801 VND 56,521 VND	1 Piece(s)	Available	Same day	5	15	No Surface Treatment	10	Single	Single	0.024	167	206	-0.013
22,495 VND 20,246 VND	1 Piece(s)	Available	Same day	6	19	No Surface Treatment	12	Single	Single	24	206	265	+0.003 -0.012
22,514 VND 20,263 VND	1 Piece(s)	Available	Same day	8	24	No Surface Treatment	15	Single	Single	24	265	380	+0.003 -0.012
23,086 VND 20,777 VND	1 Piece(s)	Available	Same day	10	29	No Surface Treatment	19	Single	Single	24	372	549	+0.003 -0.012
24,156 VND 21,740 VND	1 Piece(s)	Available	Same day	12	30	No Surface Treatment	21	Single	Single	24	412	598	+0.003 -0.012
37,804 VND 32,133 VND	1 Piece(s)	Available	Same day	13	32	No Surface Treatment	23	Single	Single	0.024	510	784	-0.015
28,500 VND 25,650 VND	1 Piece(s)	Available	Same day	16	37	No Surface Treatment	28	Single	Single	24	775	1180	+0.003 -0.012
33,851 VND 30,466 VND	1 Piece(s)	Available	Same day	20	42	No Surface Treatment	32	Single	Single	30	882	1370	+0.003 -0.013
50,219 VND 42,686 VND	1 Piece(s)	Available	Same day	25	59	No Surface Treatment	40	Single	Single	30	980	1570	+0.003 -0.013
65,474 VND 58,927 VND	1 Piece(s)	Available	Same day	30	64	No Surface Treatment	45	Single	Single	30	1570	2740	+0.003 -0.013
123,349 VND 104,847 VND	1 Piece(s)	Available	Same day	35	70	No Surface Treatment	52	Single	Single	0.035	1670	3140	-0.025
144,307 VND 122,661 VND	1 Piece(s)	Available	Same day	40	80	No Surface Treatment	60	Single	Single	0.035	2160	4020	-0.023
365,234 VND 310,449 VND	1 Piece(s)	Available	Same day	50	100	No Surface Treatment	80	Single	Single	0.035	3820	7940	-0.028
70,562 VND 63,506 VND	1 Piece(s)	Available	Same day	5	15	[Surface Treatment] Electroless Nickel Plating	10	Single	Single	0.024	167	206	-0.015
37,804 VND 34,024 VND	1 Piece(s)	Available	Same day	6	19	[Surface Treatment] Electroless Nickel Plating	12	Single	Single	0.024	206	265	-0.015
32,183 VND 28,965 VND	1 Piece(s)	Available	Same day	8	24	[Surface Treatment] Electroless Nickel Plating	15	Single	Single	0.024	265	380	-0.015
40,131 VND 36,118 VND	1 Piece(s)	Available	Same day	10	29	[Surface Treatment] Electroless Nickel Plating	19	Single	Single	0.024	372	549	-0.016
41,685 VND 37,517 VND	1 Piece(s)	Available	Same day	12	30	[Surface Treatment] Electroless Nickel Plating	21	Single	Single	0.024	412	598	-0.016
42,461 VND 38,215 VND	1 Piece(s)	Available	Same day	13	32	[Surface Treatment] Electroless Nickel Plating	23	Single	Single	0.024	510	784	-0.016
42,461 VND 38,215 VND	1 Piece(s)	Available	Same day	16	37	[Surface Treatment] Electroless Nickel Plating	28	Single	Single	0.024	775	1180	-0.016
52,553 VND 47,298 VND	1 Piece(s)	Available	Same day	20	42	[Surface Treatment] Electroless Nickel Plating	32	Single	Single	0.03	882	1370	-0.018
82,205 VND 69,874 VND	1 Piece(s)	Available	Same day	25	59	[Surface Treatment] Electroless Nickel Plating	40	Single	Single	0.03	980	1570	-0.018
93,849 VND 79,772 VND	1 Piece(s)	Available	Same day	30	64	[Surface Treatment] Electroless Nickel Plating	45	Single	Single	0.03	1570	2740	-0.018
149,741 VND 127,280 VND	1 Piece(s)	Available	Same day	35	70	[Surface Treatment] Electroless Nickel Plating	52	Single	Single	0.035	1670	3140	-0.023
176,136 VND 149,716 VND	1 Piece(s)	Available	Same day	40	80	[Surface Treatment] Electroless Nickel Plating	60	Single	Single	0.035	2160	4020	-0.023
450,624 VND 383,030 VND	1 Piece(s)	Available	Same day	50	100	[Surface Treatment] Electroless Nickel Plating	80	Single	Single	0.035	3820	7940	-0.025

Loading...Tải…

■ Test conditions
•Linear bearing (inner diameter 16) is matched with MISUMI guide shaft (PSFJ) to apply 63kg load and walk for 30km, and confirm the product damage and sliding noise.
Product Feature Drawings

■ Test results
The economy series product ensures smooth sliding of steel ball, which have good durability and low noise
Product Feature Drawings

*Products circulating on the market are similar products randomly purchased by our company from online or offline markets
*The test data are obtained through testing by our company, which are for reference only

Example of Use

Equipment Name:
Stamping die position adjustment component

Design Purpose:
Adjust the position of the stamping die to correct the deviation of the opening position in the width direction of the sheet workpiece.

Application Description:
By matching with the cylinder, it realizes the guidance of the linear motion of the workpiece in the horizontal direction.

Application Industries

Electronic & Electrical Appliances	Automotive	Lithium battery

LCD	Smart phone	Semiconductor

Basic InformationThông tin cơ bản

Type	Straight	Style	Standard	Outer Cylinder Material	SUJ2 Equivalent
Lubrication Type	Not Provided	Accuracy	Standard Grade	Motion	Linear
Types	Straight	Ball Material	SUJ2 Equivalent	Retainer Material	Plastic
Seal	Provided

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: What brand is the linear bearing of FA?: Answer:Answer: The linear bearing of FA is MISUMI brand.
Question:Question: What is the difference between the single liner type and the double liner type of linear bearing of FA?: Answer:Answer: Single liner type is one row of steel balls, and double liner type is two rows of steel balls. Generally, the length of the double liner type is more than twice that of the single liner type, and the contact area of steel balls is longer, the radial sway is smaller, and the rated load is larger.
Question:Question: How is linear bearing maintained regularly?: Answer:Answer: MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
Question:Question: Comparison of antirust ability of linear bearings?: Answer:Answer: Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment.
Ordinary bearing steel and stainless steel (SUS440C) are easy to rust, so it is necessary to apply anti-rust oil regularly.
Question:Question: Is there a product stamp on the linear bearing?: Answer:Answer: There is no stamp on the product body, and the product model is on the packaging box.
Question:Question: When the linear bearing and the guide shaft are used together, some are closely matched, but some have relatively large clearance. Does it affect the use?: Answer:Answer: The linear bearing and the guide shaft are in point contact and rolling fit through the circulating steel ball structure. Because of point contact and non-interference fit, it is normal to Provided Clearance between the shaft and the bearing, which will not affect the use. The use of this structure greatly reduces the friction resistance and prolongs the service life of the workpiece.
Question:Question: How to deal with oil leakage in the received linear bearing?: Answer:Answer: Linear bearing is coated with anti-rust oil (except for MX grease device) when leaving the factory, which has little influence on grease. It is recommended to clean it with ultrasonic cleaner or engine oil before use and apply grease after drying.
Question:Question: How much load does linear bearing carry?: Answer:Answer: For specific load carried, please refer to Load Carried information
Question:Question: Can linear bearing be rotated?: Answer:Answer: The linear bearing is not suitable for rotating motion in structure. If it is forcibly rotated, it may cause damage to the product. If rotating motion is required, please give priority to linear type rotating bushings.

Check other FAQ (6 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inscribed Circle Dia. dr(Ø)

Overall Length L(mm)

Outer Cylinder Surface Treatment

Outer Dia. D(Ø)

Ball Recirculating Type

Eccentricity(µm)

type

Length

CADCAD