Bushings for Locating Pins - Configurable, Shouldered, Standard / Thin Wall
:
MISUMI
- Please check the content on our website as the PDF does not contain the most up-to-date information.
This is a straight type bushing for positioning pins. Custom dimensions are available.
■Standard
[ ! ]
■Thin-wall type
[ ! ]
■Standard
[ ! ] For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
■Thin-wall type
[ ! ] For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
| [M] Material | [S] Surface Treatment | [H] Hardness | Type | ||
| p6 | m6 | h7 | |||
| SKS3 Equivalent | — | 56 to 60HRC | JBHFP | JBHF | JBHFH |
| SKS3 Equivalent | Black Oxide | 56 to 60HRC | JBHFBP | JBHFB | JBHFBH |
| SKS3 Equivalent | Electroless Nickel Plating | 56 to 60HRC | JBHFMP | JBHFM | JBHFMH |
| SUS304 | — | — | JBHFSP | JBHFS | JBHFSH |
| SUS440C or 13Cr Stainless Steel | — | 50 to 55HRC | JBHFCP | JBHFC | JBHFCH |
■Thin-wall type
| [M] Material | [S] Surface Treatment | [H] Hardness | Type | ||
| p6 | m6 | h7 | |||
| SKS3 Equivalent | — | 56 to 60HRC | JBHUFP | JBHUF | JBHUFH |
| SKS3 Equivalent | Black Oxide | 56 to 60HRC | JBHUFBP | JBHUFB | JBHUFBH |
| SKS3 Equivalent | Electroless Nickel Plating | 56 to 60HRC | JBHUFMP | JBHUFM | JBHUFMH |
| SUS440C or 13Cr Stainless Steel | — | 50 to 55HRC | JBHUFCP | JBHUFC | JBHUFCH |