(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
High-speed steel SKH51, fixed shaft diameter (D) type straight center pin with machined tip.
Part Number |
---|
CPHJ-5LB4-[50-300/0.01] |
CPHJ-5LB4.5-[50-300/0.01] |
CPHJ-5LB5-[50-350/0.01] |
CPHJ-5LB5.5-[50-350/0.01] |
CPHJ-5LB6-[50-350/0.01] |
CPHJ-5LB6.5-[50-350/0.01] |
CPHJ-5LB7-[50-350/0.01] |
CPHJ-5LC4-[50-300/0.01]-C[0.1-1.9/0.1] |
CPHJ-5LC4.5-[50-300/0.01]-C[0.1-2.1/0.1] |
CPHJ-5LC5-[50-350/0.01]-C[0.1-2.4/0.1] |
CPHJ-5LC5.5-[50-350/0.01]-C[0.1-2.6/0.1] |
CPHJ-5LC6-[50-350/0.01]-C[0.1-2.9/0.1] |
CPHJ-5LC6.5-[50-350/0.01]-C[0.1-3.1/0.1] |
CPHJ-5LC7-[50-350/0.01]-C[0.1-3.4/0.1] |
CPHJ-5LG4-[50-300/0.01]-K[45-89/1] |
CPHJ-5LG4.5-[50-300/0.01]-K[45-89/1] |
CPHJ-5LG5-[50-350/0.01]-K[45-89/1] |
CPHJ-5LG5.5-[50-350/0.01]-K[45-89/1] |
CPHJ-5LG6-[50-350/0.01]-K[45-89/1] |
CPHJ-5LG6.5-[50-350/0.01]-K[45-89/1] |
CPHJ-5LG7-[50-350/0.01]-K[45-89/1] |
CPHJ-5LR4-[50-300/0.01]-R[0.2-1.9/0.1] |
CPHJ-5LR4.5-[50-300/0.01]-R[0.2-2.1/0.1] |
CPHJ-5LR5-[50-350/0.01]-R[0.2-2.4/0.1] |
CPHJ-5LR5.5-[50-350/0.01]-R[0.2-2.6/0.1] |
CPHJ-5LR6-[50-350/0.01]-R[0.2-2.9/0.1] |
CPHJ-5LR6.5-[50-350/0.01]-R[0.2-3.1/0.1] |
CPHJ-5LR7-[50-350/0.01]-R[0.2-3.4/0.1] |
CPHJ-5LT4-[50-300/0.01]-S[0.1-8/0.1]-K[1-45/1] |
CPHJ-5LT4.5-[50-300/0.01]-S[0.1-9/0.1]-K[1-45/1] |
CPHJ-5LT5-[50-350/0.01]-S[0.1-10/0.1]-K[1-45/1] |
CPHJ-5LT5.5-[50-350/0.01]-S[0.1-11/0.1]-K[1-45/1] |
CPHJ-5LT6-[50-350/0.01]-S[0.1-12/0.1]-K[1-45/1] |
CPHJ-5LT6.5-[50-350/0.01]-S[0.1-13/0.1]-K[1-45/1] |
CPHJ-5LT7-[50-350/0.01]-S[0.1-14/0.1]-K[1-45/1] |
CPHJE-5LB4-[50-300/0.01] |
CPHJE-5LB4.5-[50-300/0.01] |
CPHJE-5LB5-[50-350/0.01] |
CPHJE-5LB5.5-[50-350/0.01] |
CPHJE-5LB6-[50-350/0.01] |
CPHJE-5LB6.5-[50-350/0.01] |
CPHJE-5LB7-[50-350/0.01] |
CPHJE-5LC4-[50-300/0.01]-C[0.1-1.9/0.1] |
CPHJE-5LC4.5-[50-300/0.01]-C[0.1-2.1/0.1] |
CPHJE-5LC5-[50-350/0.01]-C[0.1-2.4/0.1] |
CPHJE-5LC5.5-[50-350/0.01]-C[0.1-2.6/0.1] |
CPHJE-5LC6-[50-350/0.01]-C[0.1-2.9/0.1] |
CPHJE-5LC6.5-[50-350/0.01]-C[0.1-3.1/0.1] |
CPHJE-5LC7-[50-350/0.01]-C[0.1-3.4/0.1] |
CPHJE-5LG4-[50-300/0.01]-K[45-89/1] |
CPHJE-5LG4.5-[50-300/0.01]-K[45-89/1] |
CPHJE-5LG5-[50-350/0.01]-K[45-89/1] |
CPHJE-5LG5.5-[50-350/0.01]-K[45-89/1] |
CPHJE-5LG6-[50-350/0.01]-K[45-89/1] |
CPHJE-5LG6.5-[50-350/0.01]-K[45-89/1] |
CPHJE-5LG7-[50-350/0.01]-K[45-89/1] |
CPHJE-5LR4-[50-300/0.01]-R[0.2-1.9/0.1] |
CPHJE-5LR4.5-[50-300/0.01]-R[0.2-2.1/0.1] |
CPHJE-5LR5-[50-350/0.01]-R[0.2-2.4/0.1] |
CPHJE-5LR5.5-[50-350/0.01]-R[0.2-2.6/0.1] |
CPHJE-5LR6-[50-350/0.01]-R[0.2-2.9/0.1] |
CPHJE-5LR6.5-[50-350/0.01]-R[0.2-3.1/0.1] |
CPHJE-5LR7-[50-350/0.01]-R[0.2-3.4/0.1] |
CPHJE-5LT4-[50-300/0.01]-S[0.1-8/0.1]-K[1-45/1] |
CPHJE-5LT4.5-[50-300/0.01]-S[0.1-9/0.1]-K[1-45/1] |
CPHJE-5LT5-[50-350/0.01]-S[0.1-10/0.1]-K[1-45/1] |
CPHJE-5LT5.5-[50-350/0.01]-S[0.1-11/0.1]-K[1-45/1] |
CPHJE-5LT6-[50-350/0.01]-S[0.1-12/0.1]-K[1-45/1] |
CPHJE-5LT6.5-[50-350/0.01]-S[0.1-13/0.1]-K[1-45/1] |
CPHJE-5LT7-[50-350/0.01]-S[0.1-14/0.1]-K[1-45/1] |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Head thickness | Shaft diameter tolerance | D/P (Shaft diameter) (mm) | Tip shape | Applicable ejector sleeves inner diameter tolerance | C (C chamfering width on the tip) (mm) | K (Taper angle) (°) | L (L dimension) (mm) | R (Tip R chamfering) (mm) | S (Tip tapered width) (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 4 | B | - | - | - | 50 ~ 300 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 4.5 | B | - | - | - | 50 ~ 300 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 5 | B | - | - | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 5.5 | B | - | - | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 6 | B | - | - | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 6.5 | B | - | - | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 7 | B | - | - | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 4 | C | - | 0.1 ~ 1.9 | - | 50 ~ 300 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 4.5 | C | - | 0.1 ~ 2.1 | - | 50 ~ 300 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 5 | C | - | 0.1 ~ 2.4 | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 5.5 | C | - | 0.1 ~ 2.6 | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 6 | C | - | 0.1 ~ 2.9 | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 6.5 | C | - | 0.1 ~ 3.1 | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 7 | C | - | 0.1 ~ 3.4 | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 4 | G | - | - | 45 ~ 89 | 50 ~ 300 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 4.5 | G | - | - | 45 ~ 89 | 50 ~ 300 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 5 | G | - | - | 45 ~ 89 | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 5.5 | G | - | - | 45 ~ 89 | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 6 | G | - | - | 45 ~ 89 | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 6.5 | G | - | - | 45 ~ 89 | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 7 | G | - | - | 45 ~ 89 | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 4 | R | - | - | - | 50 ~ 300 | 0.2 ~ 1.9 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 4.5 | R | - | - | - | 50 ~ 300 | 0.2 ~ 2.1 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 5 | R | - | - | - | 50 ~ 350 | 0.2 ~ 2.4 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 5.5 | R | - | - | - | 50 ~ 350 | 0.2 ~ 2.6 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 6 | R | - | - | - | 50 ~ 350 | 0.2 ~ 2.9 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 6.5 | R | - | - | - | 50 ~ 350 | 0.2 ~ 3.1 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 7 | R | - | - | - | 50 ~ 350 | 0.2 ~ 3.4 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 4 | T | - | - | 1 ~ 45 | 50 ~ 300 | - | 0.1 ~ 8 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 4.5 | T | - | - | 1 ~ 45 | 50 ~ 300 | - | 0.1 ~ 9 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 5 | T | - | - | 1 ~ 45 | 50 ~ 350 | - | 0.1 ~ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 5.5 | T | - | - | 1 ~ 45 | 50 ~ 350 | - | 0.1 ~ 11 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 6 | T | - | - | 1 ~ 45 | 50 ~ 350 | - | 0.1 ~ 12 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 6.5 | T | - | - | 1 ~ 45 | 50 ~ 350 | - | 0.1 ~ 13 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | 0/-0.005 | 7 | T | - | - | 1 ~ 45 | 50 ~ 350 | - | 0.1 ~ 14 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 4 | B | +0.01/0 or H7 | - | - | 50 ~ 300 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 4.5 | B | +0.01/0 or H7 | - | - | 50 ~ 300 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 5 | B | +0.01/0 or H7 | - | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 5.5 | B | +0.01/0 or H7 | - | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 6 | B | +0.01/0 or H7 | - | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 6.5 | B | +0.01/0 or H7 | - | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 7 | B | +0.01/0 or H7 | - | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 4 | C | +0.01/0 or H7 | 0.1 ~ 1.9 | - | 50 ~ 300 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 4.5 | C | +0.01/0 or H7 | 0.1 ~ 2.1 | - | 50 ~ 300 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 5 | C | +0.01/0 or H7 | 0.1 ~ 2.4 | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 5.5 | C | +0.01/0 or H7 | 0.1 ~ 2.6 | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 6 | C | +0.01/0 or H7 | 0.1 ~ 2.9 | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 6.5 | C | +0.01/0 or H7 | 0.1 ~ 3.1 | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 7 | C | +0.01/0 or H7 | 0.1 ~ 3.4 | - | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 4 | G | +0.01/0 or H7 | - | 45 ~ 89 | 50 ~ 300 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 4.5 | G | +0.01/0 or H7 | - | 45 ~ 89 | 50 ~ 300 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 5 | G | +0.01/0 or H7 | - | 45 ~ 89 | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 5.5 | G | +0.01/0 or H7 | - | 45 ~ 89 | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 6 | G | +0.01/0 or H7 | - | 45 ~ 89 | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 6.5 | G | +0.01/0 or H7 | - | 45 ~ 89 | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 7 | G | +0.01/0 or H7 | - | 45 ~ 89 | 50 ~ 350 | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 4 | R | +0.01/0 or H7 | - | - | 50 ~ 300 | 0.2 ~ 1.9 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 4.5 | R | +0.01/0 or H7 | - | - | 50 ~ 300 | 0.2 ~ 2.1 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 5 | R | +0.01/0 or H7 | - | - | 50 ~ 350 | 0.2 ~ 2.4 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 5.5 | R | +0.01/0 or H7 | - | - | 50 ~ 350 | 0.2 ~ 2.6 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 6 | R | +0.01/0 or H7 | - | - | 50 ~ 350 | 0.2 ~ 2.9 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 6.5 | R | +0.01/0 or H7 | - | - | 50 ~ 350 | 0.2 ~ 3.1 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 7 | R | +0.01/0 or H7 | - | - | 50 ~ 350 | 0.2 ~ 3.4 | - | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 4 | T | +0.01/0 or H7 | - | 1 ~ 45 | 50 ~ 300 | - | 0.1 ~ 8 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 4.5 | T | +0.01/0 or H7 | - | 1 ~ 45 | 50 ~ 300 | - | 0.1 ~ 9 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 5 | T | +0.01/0 or H7 | - | 1 ~ 45 | 50 ~ 350 | - | 0.1 ~ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 5.5 | T | +0.01/0 or H7 | - | 1 ~ 45 | 50 ~ 350 | - | 0.1 ~ 11 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 6 | T | +0.01/0 or H7 | - | 1 ~ 45 | 50 ~ 350 | - | 0.1 ~ 12 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 6.5 | T | +0.01/0 or H7 | - | 1 ~ 45 | 50 ~ 350 | - | 0.1 ~ 13 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 6mm(JIS) | -0.01/-0.02 | 7 | T | +0.01/0 or H7 | - | 1 ~ 45 | 50 ~ 350 | - | 0.1 ~ 14 |
Loading...Tải…
Material | SKH51 | Surface treatment | No | With/without cooling hole | No |
---|
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy