(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
pilot punch installed on the stripper plate. Compared to installing the pilot punch on the punch plate, the distance that the pilot punch rubs against the workpiece can be reduced. In this case, since the stripper plate is the reference for positioning, we recommend using a stripper guide pin to regulate the stripper behavior.
Part Number |
---|
A-APTP1.6-[10-40/0.1]-P[0.3-1.59/0.01]-A[10,15,20,25,30] |
A-APTP1.6-[10-40/0.1]-P[0.3-1.59/0.01]-AC[16-45/1] |
A-APTP2.0-[10-40/0.1]-P[0.5-1.99/0.01]-A[10,15,20,25,30] |
A-APTP2.0-[10-40/0.1]-P[0.5-1.99/0.01]-AC[16-45/1] |
A-APTP2.5-[10-40/0.1]-P[1-2.49/0.01]-A[10,15,20,25,30] |
A-APTP2.5-[10-40/0.1]-P[1-2.49/0.01]-AC[16-45/1] |
A-APTP3-[10-40/0.1]-P[1-2.99/0.01]-A[10,15,20,25,30] |
A-APTP3-[10-40/0.1]-P[1-2.99/0.01]-AC[16-45/1] |
A-APTP4-[10-40/0.1]-P[2-3.99/0.01]-A[15,20,25,30] |
A-APTP4-[10-40/0.1]-P[2-3.99/0.01]-AC[16-45/1] |
A-APTP5-[10-40/0.1]-P[2-4.99/0.01]-A[15,20,25,30] |
A-APTP5-[10-40/0.1]-P[2-4.99/0.01]-AC[16-45/1] |
A-APTP6-[10-40/0.1]-P[2.5-5.99/0.01]-A[15,20,25,30] |
A-APTP6-[10-40/0.1]-P[2.5-5.99/0.01]-AC[16-45/1] |
A-APTP8-[10-40/0.1]-P[5-7.99/0.01]-A[15,20,25,30] |
A-APTP8-[10-40/0.1]-P[5-7.99/0.01]-AC[16-45/1] |
A-APTP10-[10-40/0.1]-P[7-9.99/0.01]-A[15,20,25,30] |
A-APTP10-[10-40/0.1]-P[7-9.99/0.01]-AC[16-45/1] |
A-APTP13-[10-40/0.1]-P[10-12.99/0.01]-A[15,20,25,30] |
A-APTP13-[10-40/0.1]-P[10-12.99/0.01]-AC[16-19/1] |
A-APTP13-[10-40/0.1]-P[10-12.99/0.01]-AC[21-24/1] |
A-APTP13-[10-40/0.1]-P[10-12.99/0.01]-AC[26-29/1] |
A-APTP13-[10-40/0.1]-P[10-12.99/0.01]-AC[31-45/1] |
A-APTP16-[10-40/0.1]-P[13-15.99/0.01]-A[15,20,25,30] |
A-APTP16-[10-40/0.1]-P[13-15.99/0.01]-AC[16-19/1] |
A-APTP16-[10-40/0.1]-P[13-15.99/0.01]-AC[21-24/1] |
A-APTP16-[10-40/0.1]-P[13-15.99/0.01]-AC[26-29/1] |
A-APTP16-[10-40/0.1]-P[13-15.99/0.01]-AC[31-45/1] |
A-HTFPA1.6-[10-40/0.1]-P[0.3-1.59/0.01]-A[10,15,20,25,30] |
A-HTFPA1.6-[10-40/0.1]-P[0.3-1.59/0.01]-AC[16-45/1] |
A-HTFPA2.0-[10-40/0.1]-P[0.5-1.99/0.01]-A[10,15,20,25,30] |
A-HTFPA2.0-[10-40/0.1]-P[0.5-1.99/0.01]-AC[16-45/1] |
A-HTFPA2.5-[10-40/0.1]-P[1-2.49/0.01]-A[10,15,20,25,30] |
A-HTFPA2.5-[10-40/0.1]-P[1-2.49/0.01]-AC[16-45/1] |
A-HTFPA3-[10-40/0.1]-P[1-2.99/0.01]-A[10,15,20,25,30] |
A-HTFPA3-[10-40/0.1]-P[1-2.99/0.01]-AC[16-45/1] |
A-HTFPA4-[10-40/0.1]-P[2-3.99/0.01]-A[15,20,25,30] |
A-HTFPA4-[10-40/0.1]-P[2-3.99/0.01]-AC[16-45/1] |
A-HTFPA5-[10-40/0.1]-P[2-4.99/0.01]-A[15,20,25,30] |
A-HTFPA5-[10-40/0.1]-P[2-4.99/0.01]-AC[16-45/1] |
A-HTFPA6-[10-40/0.1]-P[2.5-5.99/0.01]-A[15,20,25,30] |
A-HTFPA6-[10-40/0.1]-P[2.5-5.99/0.01]-AC[16-45/1] |
A-HTFPA8-[10-40/0.1]-P[5-7.99/0.01]-A[15,20,25,30] |
A-HTFPA8-[10-40/0.1]-P[5-7.99/0.01]-AC[16-45/1] |
A-HTFPA10-[10-40/0.1]-P[7-9.99/0.01]-A[15,20,25,30] |
A-HTFPA10-[10-40/0.1]-P[7-9.99/0.01]-AC[16-45/1] |
A-HTFPA13-[10-40/0.1]-P[10-12.99/0.01]-A[15,20,25,30] |
A-HTFPA13-[10-40/0.1]-P[10-12.99/0.01]-AC[16-19/1] |
A-HTFPA13-[10-40/0.1]-P[10-12.99/0.01]-AC[21-24/1] |
A-HTFPA13-[10-40/0.1]-P[10-12.99/0.01]-AC[26-29/1] |
A-HTFPA13-[10-40/0.1]-P[10-12.99/0.01]-AC[31-45/1] |
A-HTFPA16-[10-40/0.1]-P[13-15.99/0.01]-A[15,20,25,30] |
A-HTFPA16-[10-40/0.1]-P[13-15.99/0.01]-AC[16-19/1] |
A-HTFPA16-[10-40/0.1]-P[13-15.99/0.01]-AC[21-24/1] |
A-HTFPA16-[10-40/0.1]-P[13-15.99/0.01]-AC[26-29/1] |
A-HTFPA16-[10-40/0.1]-P[13-15.99/0.01]-AC[31-45/1] |
A-HTFPR1.6-[10-40/0.1]-P[0.3-1.59/0.01] |
A-HTFPR2.0-[10-40/0.1]-P[0.5-1.99/0.01] |
A-HTFPR2.5-[10-40/0.1]-P[1-2.49/0.01] |
A-HTFPR3-[10-40/0.1]-P[1-2.99/0.01] |
A-HTFPR4-[10-40/0.1]-P[2-3.99/0.01] |
A-HTFPR5-[10-40/0.1]-P[2-4.99/0.01] |
A-HTFPR6-[10-40/0.1]-P[2.5-5.99/0.01] |
A-HTFPR8-[10-40/0.1]-P[5-7.99/0.01] |
A-HTFPR10-[10-40/0.1]-P[7-9.99/0.01] |
A-HTFPR13-[10-40/0.1]-P[10-12.99/0.01] |
A-HTFPR16-[10-40/0.1]-P[13-15.99/0.01] |
A-HTFPT1.6-[10-40/0.1]-P[0.3-1.59/0.01] |
A-HTFPT2.0-[10-40/0.1]-P[0.5-1.99/0.01] |
A-HTFPT2.5-[10-40/0.1]-P[1-2.49/0.01] |
A-HTFPT3-[10-40/0.1]-P[1-2.99/0.01] |
A-HTFPT4-[10-40/0.1]-P[2-3.99/0.01] |
A-HTFPT5-[10-40/0.1]-P[2-4.99/0.01] |
A-HTFPT6-[10-40/0.1]-P[2.5-5.99/0.01] |
A-HTFPT8-[10-40/0.1]-P[5-7.99/0.01] |
A-HTFPT10-[10-40/0.1]-P[7-9.99/0.01] |
A-HTFPT13-[10-40/0.1]-P[10-12.99/0.01] |
A-HTFPT16-[10-40/0.1]-P[13-15.99/0.01] |
A-PTFPA1.6-[10-40/0.1]-P[0.3-1.59/0.01]-A[10,15,20,25,30] |
A-PTFPA1.6-[10-40/0.1]-P[0.3-1.59/0.01]-AC[16-45/1] |
A-PTFPA2.0-[10-40/0.1]-P[0.5-1.99/0.01]-A[10,15,20,25,30] |
A-PTFPA2.0-[10-40/0.1]-P[0.5-1.99/0.01]-AC[16-45/1] |
A-PTFPA2.5-[10-40/0.1]-P[1-2.49/0.01]-A[10,15,20,25,30] |
A-PTFPA2.5-[10-40/0.1]-P[1-2.49/0.01]-AC[16-45/1] |
A-PTFPA3-[10-40/0.1]-P[1-2.99/0.01]-A[10,15,20,25,30] |
A-PTFPA3-[10-40/0.1]-P[1-2.99/0.01]-AC[16-45/1] |
A-PTFPA4-[10-40/0.1]-P[2-3.99/0.01]-A[15,20,25,30] |
A-PTFPA4-[10-40/0.1]-P[2-3.99/0.01]-AC[16-45/1] |
A-PTFPA5-[10-40/0.1]-P[2-4.99/0.01]-A[15,20,25,30] |
A-PTFPA5-[10-40/0.1]-P[2-4.99/0.01]-AC[16-45/1] |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Tip shape | Material | Shank diameter D tolerance | D (Shank diameter) (mm) | A (Taper angle) (°) | L (L dimension) (mm) | Tip angle change [AC] (°) | P (Tip dimension) (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 1.6 | 10 ~ 30 | 10 ~ 40 | - | 0.3 ~ 1.59 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 1.6 | - | 10 ~ 40 | 16 ~ 45 | 0.3 ~ 1.59 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 2.0 | 10 ~ 30 | 10 ~ 40 | - | 0.5 ~ 1.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 2.0 | - | 10 ~ 40 | 16 ~ 45 | 0.5 ~ 1.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 2.5 | 10 ~ 30 | 10 ~ 40 | - | 1 ~ 2.49 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 2.5 | - | 10 ~ 40 | 16 ~ 45 | 1 ~ 2.49 | ||
- | 1 Piece(s) | 8 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 3 | 10 ~ 30 | 10 ~ 40 | - | 1 ~ 2.99 | ||
- | 1 Piece(s) | 8 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 3 | - | 10 ~ 40 | 16 ~ 45 | 1 ~ 2.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 4 | 15 ~ 30 | 10 ~ 40 | - | 2 ~ 3.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 4 | - | 10 ~ 40 | 16 ~ 45 | 2 ~ 3.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 5 | 15 ~ 30 | 10 ~ 40 | - | 2 ~ 4.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 5 | - | 10 ~ 40 | 16 ~ 45 | 2 ~ 4.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 6 | 15 ~ 30 | 10 ~ 40 | - | 2.5 ~ 5.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 6 | - | 10 ~ 40 | 16 ~ 45 | 2.5 ~ 5.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 8 | 15 ~ 30 | 10 ~ 40 | - | 5 ~ 7.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 8 | - | 10 ~ 40 | 16 ~ 45 | 5 ~ 7.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 10 | 15 ~ 30 | 10 ~ 40 | - | 7 ~ 9.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 10 | - | 10 ~ 40 | 16 ~ 45 | 7 ~ 9.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 13 | 15 ~ 30 | 10 ~ 40 | - | 10 ~ 12.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 13 | - | 10 ~ 40 | 16 ~ 19 | 10 ~ 12.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 13 | - | 10 ~ 40 | 21 ~ 24 | 10 ~ 12.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 13 | - | 10 ~ 40 | 26 ~ 29 | 10 ~ 12.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 13 | - | 10 ~ 40 | 31 ~ 45 | 10 ~ 12.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 16 | 15 ~ 30 | 10 ~ 40 | - | 13 ~ 15.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 16 | - | 10 ~ 40 | 16 ~ 19 | 13 ~ 15.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 16 | - | 10 ~ 40 | 21 ~ 24 | 13 ~ 15.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 16 | - | 10 ~ 40 | 26 ~ 29 | 13 ~ 15.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKD11 Equivalen | +0.005/0 | 16 | - | 10 ~ 40 | 31 ~ 45 | 13 ~ 15.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 1.6 | 10 ~ 30 | 10 ~ 40 | - | 0.3 ~ 1.59 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 1.6 | - | 10 ~ 40 | 16 ~ 45 | 0.3 ~ 1.59 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 2.0 | 10 ~ 30 | 10 ~ 40 | - | 0.5 ~ 1.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 2.0 | - | 10 ~ 40 | 16 ~ 45 | 0.5 ~ 1.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 2.5 | 10 ~ 30 | 10 ~ 40 | - | 1 ~ 2.49 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 2.5 | - | 10 ~ 40 | 16 ~ 45 | 1 ~ 2.49 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 3 | 10 ~ 30 | 10 ~ 40 | - | 1 ~ 2.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 3 | - | 10 ~ 40 | 16 ~ 45 | 1 ~ 2.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 4 | 15 ~ 30 | 10 ~ 40 | - | 2 ~ 3.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 4 | - | 10 ~ 40 | 16 ~ 45 | 2 ~ 3.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 5 | 15 ~ 30 | 10 ~ 40 | - | 2 ~ 4.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 5 | - | 10 ~ 40 | 16 ~ 45 | 2 ~ 4.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 6 | 15 ~ 30 | 10 ~ 40 | - | 2.5 ~ 5.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 6 | - | 10 ~ 40 | 16 ~ 45 | 2.5 ~ 5.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 8 | 15 ~ 30 | 10 ~ 40 | - | 5 ~ 7.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 8 | - | 10 ~ 40 | 16 ~ 45 | 5 ~ 7.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 10 | 15 ~ 30 | 10 ~ 40 | - | 7 ~ 9.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 10 | - | 10 ~ 40 | 16 ~ 45 | 7 ~ 9.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 13 | 15 ~ 30 | 10 ~ 40 | - | 10 ~ 12.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 13 | - | 10 ~ 40 | 16 ~ 19 | 10 ~ 12.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 13 | - | 10 ~ 40 | 21 ~ 24 | 10 ~ 12.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 13 | - | 10 ~ 40 | 26 ~ 29 | 10 ~ 12.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 13 | - | 10 ~ 40 | 31 ~ 45 | 10 ~ 12.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 16 | 15 ~ 30 | 10 ~ 40 | - | 13 ~ 15.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 16 | - | 10 ~ 40 | 16 ~ 19 | 13 ~ 15.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 16 | - | 10 ~ 40 | 21 ~ 24 | 13 ~ 15.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 16 | - | 10 ~ 40 | 26 ~ 29 | 13 ~ 15.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | SKH51 Equivalent | +0.005/0 | 16 | - | 10 ~ 40 | 31 ~ 45 | 13 ~ 15.99 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Tip R | SKH51 Equivalent | +0.005/0 | 1.6 | - | 10 ~ 40 | - | 0.3 ~ 1.59 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Tip R | SKH51 Equivalent | +0.005/0 | 2.0 | - | 10 ~ 40 | - | 0.5 ~ 1.99 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Tip R | SKH51 Equivalent | +0.005/0 | 2.5 | - | 10 ~ 40 | - | 1 ~ 2.49 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tip R | SKH51 Equivalent | +0.005/0 | 3 | - | 10 ~ 40 | - | 1 ~ 2.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tip R | SKH51 Equivalent | +0.005/0 | 4 | - | 10 ~ 40 | - | 2 ~ 3.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tip R | SKH51 Equivalent | +0.005/0 | 5 | - | 10 ~ 40 | - | 2 ~ 4.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tip R | SKH51 Equivalent | +0.005/0 | 6 | - | 10 ~ 40 | - | 2.5 ~ 5.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tip R | SKH51 Equivalent | +0.005/0 | 8 | - | 10 ~ 40 | - | 5 ~ 7.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tip R | SKH51 Equivalent | +0.005/0 | 10 | - | 10 ~ 40 | - | 7 ~ 9.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tip R | SKH51 Equivalent | +0.005/0 | 13 | - | 10 ~ 40 | - | 10 ~ 12.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tip R | SKH51 Equivalent | +0.005/0 | 16 | - | 10 ~ 40 | - | 13 ~ 15.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered tip | SKH51 Equivalent | +0.005/0 | 1.6 | - | 10 ~ 40 | - | 0.3 ~ 1.59 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered tip | SKH51 Equivalent | +0.005/0 | 2.0 | - | 10 ~ 40 | - | 0.5 ~ 1.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered tip | SKH51 Equivalent | +0.005/0 | 2.5 | - | 10 ~ 40 | - | 1 ~ 2.49 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered tip | SKH51 Equivalent | +0.005/0 | 3 | - | 10 ~ 40 | - | 1 ~ 2.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered tip | SKH51 Equivalent | +0.005/0 | 4 | - | 10 ~ 40 | - | 2 ~ 3.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered tip | SKH51 Equivalent | +0.005/0 | 5 | - | 10 ~ 40 | - | 2 ~ 4.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered tip | SKH51 Equivalent | +0.005/0 | 6 | - | 10 ~ 40 | - | 2.5 ~ 5.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered tip | SKH51 Equivalent | +0.005/0 | 8 | - | 10 ~ 40 | - | 5 ~ 7.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered tip | SKH51 Equivalent | +0.005/0 | 10 | - | 10 ~ 40 | - | 7 ~ 9.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered tip | SKH51 Equivalent | +0.005/0 | 13 | - | 10 ~ 40 | - | 10 ~ 12.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered tip | SKH51 Equivalent | +0.005/0 | 16 | - | 10 ~ 40 | - | 13 ~ 15.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | Powdered high-speed steel | +0.005/0 | 1.6 | 10 ~ 30 | 10 ~ 40 | - | 0.3 ~ 1.59 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | Powdered high-speed steel | +0.005/0 | 1.6 | - | 10 ~ 40 | 16 ~ 45 | 0.3 ~ 1.59 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | Powdered high-speed steel | +0.005/0 | 2.0 | 10 ~ 30 | 10 ~ 40 | - | 0.5 ~ 1.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | Powdered high-speed steel | +0.005/0 | 2.0 | - | 10 ~ 40 | 16 ~ 45 | 0.5 ~ 1.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | Powdered high-speed steel | +0.005/0 | 2.5 | 10 ~ 30 | 10 ~ 40 | - | 1 ~ 2.49 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | Powdered high-speed steel | +0.005/0 | 2.5 | - | 10 ~ 40 | 16 ~ 45 | 1 ~ 2.49 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | Powdered high-speed steel | +0.005/0 | 3 | 10 ~ 30 | 10 ~ 40 | - | 1 ~ 2.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | Powdered high-speed steel | +0.005/0 | 3 | - | 10 ~ 40 | 16 ~ 45 | 1 ~ 2.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | Powdered high-speed steel | +0.005/0 | 4 | 15 ~ 30 | 10 ~ 40 | - | 2 ~ 3.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | Powdered high-speed steel | +0.005/0 | 4 | - | 10 ~ 40 | 16 ~ 45 | 2 ~ 3.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | Powdered high-speed steel | +0.005/0 | 5 | 15 ~ 30 | 10 ~ 40 | - | 2 ~ 4.99 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Sharp tip angle | Powdered high-speed steel | +0.005/0 | 5 | - | 10 ~ 40 | 16 ~ 45 | 2 ~ 4.99 |
Loading...Tải…
Shank type | Standard | Surface treatment | None | Mounting plate | Stripper plate |
---|---|---|---|---|---|
Shank (mounting part) shape | Standard |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy